I know this is a "home" router, but there are a lot of common vulnerabilities that can be detected.
1. Is there any intent to offer a firmware update for the Non Cloud Connect option.
2. Does Cisco intend to make the Cloud Connect Firmware "feature complete" compared to the Non Cloud Connect?
3. Is there going to be support for Stateful DHCPv6?
Using CCC with EA4500, where do I find the control for enable/disable broadcast of the SSID?
View 5 Replies View RelatedInstalled my new EA4500 and trying to access my PC from internet (remote desktop) in order to do so I need to forward the TCP port 3389. In the old web admin page this option was easy to find and change. with the new cloud connect I can't find it. how do Ienable port forwarding on the EA4500?
View 3 Replies View RelatedKeep having trouble with login onto my router (EA4500)Every now and then it will work but more often than not when I try to access it using either myrouter.local or 192.168.1.1, I keep getting an unexpected error message in the middle of the screen and it will go no further. Or I get no error and just a blue background with no icons or anything.
I tried going back in the firmware to what it was when I bought the device which is non-cloud (Ver.2.0.37.131047), but when I did that, I was logging into the router perfectly but had no internet access at all even tho all the gateway and dns details were present on the status page for the internet.
I've put it back to the cloud firmware (Ver.2.1.38.138880) and i'm back to these login problems again so I tried as per request with a cisco advisor in live chat to totally reset the router using the reset button at the back. Oh that caused problems getting things back online as every time I tried to access the interface I got a 502 error. I managed to get back online using the cisco disc that came with the router but now I'm back to square 1 with these access problems to the router.
I just can't see what is wrong here, it was fine prior to it updating itself to the cloud software, but it has been problem galore ever since.I am running Ubuntu Linux and have tried both firefox and chrome browsers which doesn't seem to matter.I have tried my sons laptop running vista which gets the same problem.I have tried disconnecting everything else on my network apart from my PC (the linux one) which is ethernet cabled direct to the router.The cloud app for my HTC does work but has very limited settings and runs extremely slow.
Might be worth mentioning that this morning when I tried accessing from google chrome, in the error box also popped up the following message, 'error_get_networks', this is the first time I saw this message so don't know if its of any relevance. I do have set in the settings that my DHCP server starts at 192.168.1.201 and most of the computers in my house have a static IP address so I don't believe anything is clashing to cause any errors.
My EA4500 router now automatically goes to Cisco Connect Cloud, and I can no longer access my router directly through my browser. I do not want to use Cisco Connect Cloud, for security reasons, so how can I disable the automatic access to the cloud? Use of the Cisco Connect Cloud should be optional, and not mandatory. If the cloud is the only way I will be allowed to make changes in my router, I may just have to return it to the store. Can this "feature" be turned off?
View 9 Replies View RelatedI recently purchased a EA4500 for my home network. After hours of searching, I couldn't find any evidence to how I can install a USB printer without the obvious Cisco Cloud Connect. I don't need any software or account to access my router over the net nor any of the features CCC provides (at least as of yet). I'm quite comfortable with using the web interface and easily managed to adjust the router for everything I need except the printer part. I certainly have things to print so I have to connect my printer to the router as it is clearly mentioned on its box that I can access my printer through it. As a last resort I tried to install the software on the CD that came with it to get a link for some "Cisco VUSB" software which I think is the solution but it keeps saying my modem is not connected to the net. It clearly isn't because I don't have an internet connection at home. What I have is a 3G connection which I use for communicating and downloads I need. So why do I need an internet connection on the router for anything and how do I install my printer?
View 3 Replies View RelatedI have EA4500 router with latest firmware update. Cisco Connect Cloud behave strange. Some devices connected to the wireless router appear in CCC and some not. For instance, Iphone is visible, Ipad is not but both have normal accesss to internet.
View 2 Replies View Relatedjust to relieve a little those who complain for the loss of functionalities/control caused by the new firmware, I want to let you know that yesterday evening when I came back home the router was bricked. After more than 2 hours of tests with the online support, they ended up the device has to be replaced.To add insult to injury, I ALSO HAVE TO PAY to ship my router to Cisco warehouse. I couldn't believe my eyes... It's not for the 10 bucks it costs the shipment (even if 10 bucks are much better in my wallet than in Cisco's), but I already spent around 300 bucks less than 2 months ago to buy the two devices and now I have to pay to fix something I have not broken.
View 4 Replies View RelatedI tried to log in into my EA4500 today, and instead of the simple window that asks for the user name and password, I am getting a Cisco Connect Cloud log in screen. It is very strange.
At the top it says: Cisco Connect Cloud/Powering Linksys Products
and below that:
Sign In If you have not yet created an account, click the 'Create Account' button in the upper right corner of the page
There is a help button, a button to create an account. There is a place where I can enter an email address and a password.
Pressing the Help button I learned that I can probably bypass this silly screen by disconnecting the internet. Is there a better way to bypass this screen and turn off Cisco Connect Cloud?
Is it possible to force a reboot of the EA4500 through the Cisco app for the Cloud?
View 2 Replies View RelatedDo i need to reset the router after the install all seems good the new firmware installed with no issues.
View 2 Replies View RelatedI upgraded my firmware back to 2.0.37 (after Cisco tried to push that cloud nonsense down my throat) and would like to re-install Cisco Connect. Has anyone successfully reinstalled the Cisco Connect software after those fine folks at Cisco took control of your router and your computer and removed it for you?This is my last Cisco/Linksys product ever. I purchased my EA4500 a week ago and then they pull this crap
View 9 Replies View RelatedHave DIR-655, HW A3, F/W 1.10. On the Advanced tab, there is no Guest Zone option. Can this be fixed with a firmware update? If so, which one?
View 2 Replies View RelatedI had a SSID name conflict with one of my devices and the router. I changed the routers SSID which eliminated the conflict. I noted that after changing the SSID, the name of the FTP server did not update to the new SSID. Is this an issue? I did not see any way to manually edit the FTP name. FTP works fine as is.
View 1 Replies View RelatedHow do I get past this slow connect cloud b.s.? Now it's stopping me from logging into my router all together. I keep getting a message "we've encountered an unexpected error" blah blah blah. I can't get past it. I've already rebooted my router.
View 9 Replies View RelatedI am interested in running the EA6500 without all the Cloud Connect software etc. Is this possible? Is there a basic way to set this up without that requirement?
View 1 Replies View RelatedThis issue seems to happen about once every week or so. I get the router settings all configured and I'm able to access it from Cloud Connect and from the APP on my smartphone. After about a week, it's no longer accessible from cloudconnect, I can access it from my smartphone, but it shows that there are no devices connected (when they are actually connected). The screen for cloudconnect will come up after I sign in, but it just has the circling dots in the center of the screen saying "waiting" and it will do this until I close out explorer. The only way I've found to resolve this is to reset the router and set everything from scratch.
View 4 Replies View RelatedWhen I attempt to upgrade the firmware, I receive error code 0x82BF010E. It wont allow me to complete the firmware upgrade on my Mac OS X (10.7.5)
View 3 Replies View RelatedWell I just check autoupdate and see new firmware out....where i can see release notes?
Anyone tested new firmware?
I bought an EA3500 because I found that I did not need the more expensivbe router. The problem that I have now is when I sign in to Cisco Connect Cloud both the old and the new router show up. I would like to remove the old router from the list. The old router shows as:CiscoA3518 [offline]
View 6 Replies View RelatedI know that Cisco Cloud Connect was released fairly recently. I also know that the e4200v2 was supposed to be a supported router from last generation for Cisco Cloud Connect. However, when I go to the upgrade firmware option on my router settings, it says that I have the most up to date firmware.
How do I get CIsco Cloud Connect setup on my e4200v2? Would I simply follow the manual install instructions for the ea4500 with the firmware for the ea4500?
I'm hoping that the updated firmware will fix an issue I'm having with getting a Seagate Expansion hard drive detected for the media server portion since I know a closely related hard drive was in the list of functioning external hard drives for the Cisco Connect Cloud firmware.
Before upgrading my firmware on my EA2700, I can easily reserve IP address for my wired device. With the new cloud interface, I click to select the device from the top pane to bring it down in the reserved IP pane below. When I try to save the IP change I get two errors: 1) Invalid characters in the device name 2) Invalid IP address. I get the same errors even if I do not edid not edit the name or IP address.
As for the device name, I did not change anything or rename the device. One device has a " - " in the name and the router was happy with it until I tried to reserve the IP. Another one had a " ' " in the name, same problem again.
My network DHCP range is set to 192.168.1.200 to 192.168.1.250 and I use the range from 192.168.1.1 to 192.168.100 for static IP. When I tried to reserve a static IP below 192.168.1.200, the router say that is an invalid IP.
The workaround to this problem has been to temporary set the DHCP range to 192.168.1.1 to 192.168.1.50 and set the static IP in that range and rename the devices to a name that the EA2700 will accept. Next I move the DHCP range from 192.168.1.50 to 192.168.1.100 and repeat the process. After, all the static IP are assigned, then I can reset the DHCP range to 192.168.1.200 to 192.168.1.250.
This is a pain to do. In the previous (cloud less) version, this was a breeze to do. Also, I have not figured out how to redirect ports with the new interface. Is that progress?
I am trying to update my WRT110 which has 1.0.04 firmware on it right now but when i try to update it toVer.1.0.05 all i get is this message.... i dont know what to do i never had a problem updating my older router's befor i had this one this is the first time im updating this one i tryed updating it on IE 8 RC1 & also Safari 4 but i get the same message . I've also tryed saving the firmware file in it's own folder still no luck try updating on my xp desktop & my laptop with vista with same message? is it a problem with linksys with the file on there website maybe?
View 9 Replies View RelatedI go to the support page for the WRT54G routers. I set the version number to version 2 and there is no firmware file to download. For every other version there is a firmware file to download but not for version 2. Where can I get the latest firmware for my router.
View 1 Replies View RelatedI found this router still in box and am now using it. I want to update the firmware because i am having issues with it. it has what i assume is the original Firmware 1.00.1. The downloads for this router are no longer available. Why?
View 1 Replies View Relatedan EA6500 router that has intermmitent connectivity issues. Went into the configuration page and saw he was a couple versions behind on firmware. Used the online update option, firmware downloaded and then indicated that router would reboot. Did not power off router or leave the configuration web page. Watched light go out on router and come back on, but the spinning wait icon never went away after 5 minutes. Powered off and on and was back at the same point with the old firmware still. Downloaded the firmware to local drive and applied from local file, but same results. Waited 10 minutes this time. Surely it doesn't take more than 10 minutes for the router to reboot itself from a firmware flash?
Gave up on trying to update firmware and configured wifi settings. Left friend's house and then got a message about 15 minutes later that the router had locked up again. If he pulls power for 2 minutes it will then work for another short period of time.
Is there anything that can be done to try and restore normal operation to this particular router, or are these all signs of a hardware failure and the unit should just be replaced?
Just got a WRT120N and went online to get the most recent firmware and when i performed the upgrade it's gets about 3/4 of the way completed before it just stalls and start screen blinking like it's caught up or something. I using a modem, wrt120n router connection with a Brand New Sony Vaio laptop. I was able to upgrade my old WRT54G V5 router but can't seem to get the new router to update.
View 7 Replies View RelatedI've got an older SRX200 that is starting to "disconnect" frequently (loss of wireless connectivity). I've gone to the Linksys website to download a firmware update, as a potential fix, but the website says no firmware is available. The current version I'm using is 1.01.18.
View 1 Replies View RelatedNom du modèle : Linksys E4200Numéro de modèle : E4200Numéro de série : 01C10C17152754Version du microcode (firmware) : 1.0.03 build 14OS : Windows 8Version du logiciel : 1.4.12284.0Type de connexion (réseau étendu) : DHCPAdresse IP (réseau local) : 192.168.0.1Adresse IP (réseau étendu) : 192.168.1.101Adresse IP de l'ordinateur : 192.168.0.135
I downloaded this file :[URL]I upgraded it, I typed 192, etc. in firefox, when to the maintenance tab, put the dowloaded file in "new firmware location" and clicked "update". It said: "you put a wrong file".this is written in the same tab : Current Firmware Version 6.0.0 Build 100906 Rel.43560
I have a Linksys E1000 with Firmware Version: 2.1.02 I am having a very hard time searching to see if there is a newer Firmware Version out for this model. If there is any new Firmware update?
View 4 Replies View RelatedI am waiting for half year. And I read the forum know the NAT though put perfromance of 1.0.01 is poor than that of 1.0.03 of E4200.Actually a bit disappoint to CISCO LINKSYS products. It is not value to cost high selling price with poor functions and performance.
View 4 Replies View RelatedWhy is there no update for the WRT54GX2 firmware?
View 1 Replies View RelatedRecently, the wrt310nv2-cc mostly got lost in wireless connection, so I would like to update the firmware, but I download the latest firmware, it could not flashed, which version should I use?
View 6 Replies View Related