I had a SSID name conflict with one of my devices and the router. I changed the routers SSID which eliminated the conflict. I noted that after changing the SSID, the name of the FTP server did not update to the new SSID. Is this an issue? I did not see any way to manually edit the FTP name. FTP works fine as is.
View 1 RepliesI have found that if I do not enable the broadcast SSID option on my 5GHz N network that my devices will forget the network and not reconnect on their own. Yet, I have the 2.4GHz G/N network set up to not broadcast my SSID and I have no problems. Why can't I disable my SSID broadcast on the 5GHz N network without these problems?
View 9 Replies View Relatedjust bought the EA4500 new, setup the router with computer plug-in RJ45, after I change my network network to "LinksysOne", I can connect to the network wireless. But when I connect it with hard wire/RJ45, it shows "cisco27205", but I cannot see "cisco27205" with wifi, neither with RJ45 connection cannot see "LinksysOne". Why this happen? is this normal?
View 1 Replies View RelatedI purchased what I think is a new EA4500 but the box was not sealed. On setup it had a SSID name of Mischief Dolphin populated with a random password. Is this a default or was perhaps this router already setup (used)
View 2 Replies View Relatedjust to relieve a little those who complain for the loss of functionalities/control caused by the new firmware, I want to let you know that yesterday evening when I came back home the router was bricked. After more than 2 hours of tests with the online support, they ended up the device has to be replaced.To add insult to injury, I ALSO HAVE TO PAY to ship my router to Cisco warehouse. I couldn't believe my eyes... It's not for the 10 bucks it costs the shipment (even if 10 bucks are much better in my wallet than in Cisco's), but I already spent around 300 bucks less than 2 months ago to buy the two devices and now I have to pay to fix something I have not broken.
View 4 Replies View RelatedThe EA4500 web-settings application asks for a username and password. The username is "admin" and the password is my long (60 character) wpa key. I see where I can change the password but it says I'll lose all wireless connections. This doesn't make sense to me. I would think the router administration username and password are completely separate from the ssid and wpa key. This was the case with my earlier LinkSys router. I'd like a router administration username to be something other than the generic "admin" and a password that is easier than my long wpa key. I want a separate ssid and wpa key (what I currently have).
View 2 Replies View RelatedUsing CCC with EA4500, where do I find the control for enable/disable broadcast of the SSID?
View 5 Replies View RelatedI know this is a "home" router, but there are a lot of common vulnerabilities that can be detected.
1. Is there any intent to offer a firmware update for the Non Cloud Connect option.
2. Does Cisco intend to make the Cloud Connect Firmware "feature complete" compared to the Non Cloud Connect?
3. Is there going to be support for Stateful DHCPv6?
Using the FTP server built into the EA4500 firmware. I can get the FTP service to work from some computers outside my home network, but when i try to access the service from a PC within my home network i am unable to connect to the server through the WAN address.
View 1 Replies View RelatedI just setup the Linksys EA4500 router on my computer and I am able to hook up to the internet on my computer and on my Logitech Revue. How do I access the media server? It is not showing up on the Logitech Revue or my Samsung TV
View 9 Replies View RelatedMy router,EA4500 is blocking just one I.P address,(a game server), and I am unable to connect to the server. I have tried this on 2 different computers, reinstalled the Cisco Connect software, reset to factory defaults and it is still blocking me from getting on this server. When I by pass the router and plug directly into my modem the Server shows up fine and I am able to get on but when I put the Router back it blocks it and does not show up at all.
View 1 Replies View RelatedI look forward to the new firmware can improve this problem.
View 3 Replies View RelatedHow to get playists to work on the EA4500 Media Server? I have the Music folder share working with a Roku Soundbridge, so now would like to copy my iTunes playlists to this folder as well. I've tried creating a .m3u file in the Music folder but the Soundbridge doesn't recognize it. I put the following one line in this file, which just points to the file stored on the disk connected to the EA4500.
View 1 Replies View RelatedI'm very disappointed with this EA4500 DLNA feature this is one of the main reasons why i got this router.My Sammy TV can detect the USB that is attached and is able to view the files in the drive but when you play any video file larger than 1gb it does not work even shuts down my TV.Only on smaller files does it work flawlessly I know its not the TV because I have played those files on my previous Router (Netgear WNDR3800) and they even work when i connect the hard drive directly to the TV has any one else had this issue happen to them?
View 9 Replies View RelatedI am trying to stream movies and music to my Panasonic TV. I have a USB hard drive connected to the EA4500.
The TV sees the media on the device and music plays fine. However, every movie I've tried shows up with an exclamation point and when I try to play it I get a message to the effect that "unable to open media". Is the EA4500 media server only compatible with certain movies?
dlna server of ea4500 does not supports time seeking? No rewind? I have tryed to plug usb-flash with video files for testing before buying an external HDD and... REALLY no time seeking?
View 3 Replies View RelatedEA 4500 seems to work fine. Have a Seagate 3 TB HD connecfed to USB. Have LG Smart box connected to EA4500 by Cat5e cable. HD hard drive contents shows and accesses ok on PC via wireless. Smart box showed HD but only media files in "documents" directory, did not show "TV" & "Movies" directories.
Reset Router Media Server Access with "TV" & "Movies" directories - presto LG smarbow showed directories now and worked fine. This morning will no longer show "TV" & "Movies" directories on Smart box. Have tried deleting and resetting Router Media Server Access with "TV" & "Movies" directories several times, no luck.
I added some files to the hard drive which is connected to EA4500 by USB. I went to the Storage--Media Server Tab and clicked Scan All. I turned on the TV and pointed the DLNA Media Server at the hard drive.
The new files did not show up. They did show up a few hours later. Does the Scan button do anything?
I tried to remotely access my disk connected to the USB port of the EA4500 and it failed until I disabled the IPv4/IPv6 SPI Firewall options. Surely, the firewall should not block the router's own FTP server!
View 8 Replies View RelatedHouse has 2 floors. I want to install 2 E3200, one on each floor, but both with the same SSID/Password, etc. so internet connection/streaming throughout the floor is seamless.
Both floors have network wall sockets ready and they all lead to the same modem/router so all devices plugged lead to the same network.
PS. both E3200 have been update to Firmware Version: 1.0.03
I will soon upgrade my wireless network from a WRT610N to an E4200v2. At setup of the router, I assume I'll be able to change the SSID of the E4200v2 and I plan to keep the same SSID as on my old router. With the same SSID as currently seen by the devices on my network
View 4 Replies View RelatedI've looked all over the internet for this and can't find a definate answer. Waited for live chat and got kicked before I got to talk to someone... Just sold my computer and the plan was to buy a newer mac but we've been getting along fine without a computer with just using our iphones. So my question, I see that Cisco has the Connect Express app for the iphone, and I've read about all the features it has like changing settings, router features, etc. But I can't find anything on using the app for the initial set up of the router. I'm currently on an older linksys router (set up before we sold the computer) but it's time for a needed upgrade.
View 3 Replies View RelatedI got my ea4500 all set up. never had a media servor or anything like that, figured this would be an easier way. when i hook up my exteral i can find it but i can only view the files in windows media player. how can i just browse the folders manually? WMP doesnt let me browse the folders as they actually are on the HDD which is such a pain in the **bleep**.
shows a device in "network infrastructure" but it says problem sending command to the program when i click that. i dont want to have to view the HDD in WMP as a media device...
My new EA4500 (fw ver 2.0.36) won't obtain an IP from a Brighthouse TM502G cable modem. The EA4500 replaced a functioning WRT54G which would obtain an IP from the ISP. I've tried upgrading firmware and have used both straight-through and crossover cables between the EA4500 & TM502G to no avail. The EA4500 would issue IPs to it's clients, but not obtain one from it's TM502G. At the moment, all 3 are daisy-chained together with the old WRT54G in the middle in order to make the EA4500 work. Both WiFi and LAN ports function in this configuration.
View 1 Replies View RelatedI downloaded and installed inSSider for Windows and, under the 2.4 Ghz tab, I can clearly see the Router SSID, on Channel 6, exactly as configuredbin the Router. However on the 5 Ghz tab, nothing? I can see Channels 36, 40, 44, 48, 52 and so on BUT no trace of any wireless signal here?I carefully reviewed the wireless settings options and it is indeed enabled.
View 1 Replies View RelatedConnect my primary router EA4500 to another EA4500?
I tried and followed the steps provided here but it doesn't work at all for the Xth time already.
The first router installed and ran flawlessly in minutes. The second one has failed to work in bridge mode for 3 hours now.
Can we get a forum title just for the EA4500?
View 1 Replies View RelatedIn my apartment, I can receive the wireless signal of free scholl wireless, which is accessable without user name and password. Although the signal is not good, but we used to use a router EA3000 to relay the signal. Now my roommate is leaving with this this router. So I bought EA4500 and try to do the similar job. However, I find that the configurations on 192.168.1.1 are different between EA3000 and EA4500. Many options cannot be found in the EA4500 page, such as the wireless client.
View 4 Replies View RelatedI recently got an EA4500 from a friend and when I tried to run the Cisco Connect CD on my MacBook it gets to 25% and then stops and says it can't find a router. I've reset, powercycled, unplugged, plugged, searched, and searched but I cant seem to get it to find the router.
View 3 Replies View RelatedI'm hoping to get this router to allow WOL (actually wake on WAN) but it seems to be blocking the necessary broadcast magic packet even though the settings appear correct. It's not critical, but the reason is this: I'd like to shut down the home PC, but when necessary be able to start it up and use a VPN to access any info I need remotely.
From within the LAN, I can verity that WOL works. I have NIC and PCI WOL enabled in the BIOS. The NIC (a Marvel Yukon Gigabit) has WOL enabled as well as "allow this device to wake.." using magic packets under power management. The target machine's local IP is reserved through the EA4500 DHCP Reservation table. Just for troubleshooting, I opened port 9 in windows firewall. More importantly, I have ports 7-9 forwarded to my target LAN address. Single port forwarding... it just has been less reliable (?). I'm using a mask of 255.255.255.128 in order to enable broadcasting on .127 at some point as it seems it must be necessary. Broadcasting on .255 is not possible, despite some workarounds I found on the web. EA4500 firmware is the latest, 2.0.37. I have turned off the multicast filter and the anonymous internet filters under the security tab.
So, with these settings, I can WOL from inside the network no problem either targeting the LAN address, or by using a dyndns address. So far so good.With these same settings, I can go to WAN using Depicus or the Cloud Connect Pro app over 4G on an iPad. With all these same settings, WOLsniffer confirms the magic packet still getting through over WAN (obviously using the dyndns address). Even better, I can shutdown the target PC and STILL wake it up within a few minutes from WAN. Let me restate that! Wake up over WAN works, but only for the first few minutes after a shutdown.
However, if I wait 20 minutes or so, WOL stops working. If I change the port forwarding to .127, not only does it not work, but WOLsniffer will fail to see the magic packet. My conclusion is that the ARP table is getting purged, which is undertandable, and so the target LAN address isn't in memory. However, frustratingly the EA4500 will not broadcast no matter what settings you use. This limitation is undocumented, and counterintuitive since the software allows you to disable multicast filtering and does not notify you of an error when forwarding to xxx.xxx.xxx.127 with a 255.255.255.128 mask.
How do I enable WDS on my new EA4500 ?
View 3 Replies View RelatedWas thinking to buy this router but I am not sure if it supports magic packets in order to use wake on lan on PCss and NAS
View 3 Replies View RelatedI really want to have a password on my wifi, but I cant control it when all it keeps asking me is for a CD I have a EA4500
View 1 Replies View Related