How do I get past this slow connect cloud b.s.? Now it's stopping me from logging into my router all together. I keep getting a message "we've encountered an unexpected error" blah blah blah. I can't get past it. I've already rebooted my router.
View 9 RepliesI am interested in running the EA6500 without all the Cloud Connect software etc. Is this possible? Is there a basic way to set this up without that requirement?
View 1 Replies View RelatedThis issue seems to happen about once every week or so. I get the router settings all configured and I'm able to access it from Cloud Connect and from the APP on my smartphone. After about a week, it's no longer accessible from cloudconnect, I can access it from my smartphone, but it shows that there are no devices connected (when they are actually connected). The screen for cloudconnect will come up after I sign in, but it just has the circling dots in the center of the screen saying "waiting" and it will do this until I close out explorer. The only way I've found to resolve this is to reset the router and set everything from scratch.
View 4 Replies View RelatedKeep having trouble with login onto my router (EA4500)Every now and then it will work but more often than not when I try to access it using either myrouter.local or 192.168.1.1, I keep getting an unexpected error message in the middle of the screen and it will go no further. Or I get no error and just a blue background with no icons or anything.
I tried going back in the firmware to what it was when I bought the device which is non-cloud (Ver.2.0.37.131047), but when I did that, I was logging into the router perfectly but had no internet access at all even tho all the gateway and dns details were present on the status page for the internet.
I've put it back to the cloud firmware (Ver.2.1.38.138880) and i'm back to these login problems again so I tried as per request with a cisco advisor in live chat to totally reset the router using the reset button at the back. Oh that caused problems getting things back online as every time I tried to access the interface I got a 502 error. I managed to get back online using the cisco disc that came with the router but now I'm back to square 1 with these access problems to the router.
I just can't see what is wrong here, it was fine prior to it updating itself to the cloud software, but it has been problem galore ever since.I am running Ubuntu Linux and have tried both firefox and chrome browsers which doesn't seem to matter.I have tried my sons laptop running vista which gets the same problem.I have tried disconnecting everything else on my network apart from my PC (the linux one) which is ethernet cabled direct to the router.The cloud app for my HTC does work but has very limited settings and runs extremely slow.
Might be worth mentioning that this morning when I tried accessing from google chrome, in the error box also popped up the following message, 'error_get_networks', this is the first time I saw this message so don't know if its of any relevance. I do have set in the settings that my DHCP server starts at 192.168.1.201 and most of the computers in my house have a static IP address so I don't believe anything is clashing to cause any errors.
My EA4500 router now automatically goes to Cisco Connect Cloud, and I can no longer access my router directly through my browser. I do not want to use Cisco Connect Cloud, for security reasons, so how can I disable the automatic access to the cloud? Use of the Cisco Connect Cloud should be optional, and not mandatory. If the cloud is the only way I will be allowed to make changes in my router, I may just have to return it to the store. Can this "feature" be turned off?
View 9 Replies View RelatedI recently purchased a EA4500 for my home network. After hours of searching, I couldn't find any evidence to how I can install a USB printer without the obvious Cisco Cloud Connect. I don't need any software or account to access my router over the net nor any of the features CCC provides (at least as of yet). I'm quite comfortable with using the web interface and easily managed to adjust the router for everything I need except the printer part. I certainly have things to print so I have to connect my printer to the router as it is clearly mentioned on its box that I can access my printer through it. As a last resort I tried to install the software on the CD that came with it to get a link for some "Cisco VUSB" software which I think is the solution but it keeps saying my modem is not connected to the net. It clearly isn't because I don't have an internet connection at home. What I have is a 3G connection which I use for communicating and downloads I need. So why do I need an internet connection on the router for anything and how do I install my printer?
View 3 Replies View RelatedI bought an EA3500 because I found that I did not need the more expensivbe router. The problem that I have now is when I sign in to Cisco Connect Cloud both the old and the new router show up. I would like to remove the old router from the list. The old router shows as:CiscoA3518 [offline]
View 6 Replies View RelatedI know that Cisco Cloud Connect was released fairly recently. I also know that the e4200v2 was supposed to be a supported router from last generation for Cisco Cloud Connect. However, when I go to the upgrade firmware option on my router settings, it says that I have the most up to date firmware.
How do I get CIsco Cloud Connect setup on my e4200v2? Would I simply follow the manual install instructions for the ea4500 with the firmware for the ea4500?
I'm hoping that the updated firmware will fix an issue I'm having with getting a Seagate Expansion hard drive detected for the media server portion since I know a closely related hard drive was in the list of functioning external hard drives for the Cisco Connect Cloud firmware.
Before upgrading my firmware on my EA2700, I can easily reserve IP address for my wired device. With the new cloud interface, I click to select the device from the top pane to bring it down in the reserved IP pane below. When I try to save the IP change I get two errors: 1) Invalid characters in the device name 2) Invalid IP address. I get the same errors even if I do not edid not edit the name or IP address.
As for the device name, I did not change anything or rename the device. One device has a " - " in the name and the router was happy with it until I tried to reserve the IP. Another one had a " ' " in the name, same problem again.
My network DHCP range is set to 192.168.1.200 to 192.168.1.250 and I use the range from 192.168.1.1 to 192.168.100 for static IP. When I tried to reserve a static IP below 192.168.1.200, the router say that is an invalid IP.
The workaround to this problem has been to temporary set the DHCP range to 192.168.1.1 to 192.168.1.50 and set the static IP in that range and rename the devices to a name that the EA2700 will accept. Next I move the DHCP range from 192.168.1.50 to 192.168.1.100 and repeat the process. After, all the static IP are assigned, then I can reset the DHCP range to 192.168.1.200 to 192.168.1.250.
This is a pain to do. In the previous (cloud less) version, this was a breeze to do. Also, I have not figured out how to redirect ports with the new interface. Is that progress?
Installed my new EA4500 and trying to access my PC from internet (remote desktop) in order to do so I need to forward the TCP port 3389. In the old web admin page this option was easy to find and change. with the new cloud connect I can't find it. how do Ienable port forwarding on the EA4500?
View 3 Replies View RelatedI just purchased an EA3500 because I absolutely need guest access. I set everything up through the Cisco Connect application on the CD and all was well. I figured it's time to get into the whole cloud connect app thing, as this is why I chose this router over another but after creating the account and activating through email, I constantly get the message that I need to associate my router with my account.The PC I am using is directly connected to the router through a cable. I'm not sure what else I am to do at this point. The content of the entire message basically is telling me to head to [URL] with the PC connected to the router that I want associated and to follow the directions.
1. There are no directions... I get that message every time.
2. I've tried rebooting the router and then logging in to the website - that gives me a message saying there's no router detected, meaning that somehow the site IS detecting the router, I just somehow haven't associated it.
I have EA4500 router with latest firmware update. Cisco Connect Cloud behave strange. Some devices connected to the wireless router appear in CCC and some not. For instance, Iphone is visible, Ipad is not but both have normal accesss to internet.
View 2 Replies View RelatedUsing CCC with EA4500, where do I find the control for enable/disable broadcast of the SSID?
View 5 Replies View RelatedI know this is a "home" router, but there are a lot of common vulnerabilities that can be detected.
1. Is there any intent to offer a firmware update for the Non Cloud Connect option.
2. Does Cisco intend to make the Cloud Connect Firmware "feature complete" compared to the Non Cloud Connect?
3. Is there going to be support for Stateful DHCPv6?
I tried to log in into my EA4500 today, and instead of the simple window that asks for the user name and password, I am getting a Cisco Connect Cloud log in screen. It is very strange.
At the top it says: Cisco Connect Cloud/Powering Linksys Products
and below that:
Sign In If you have not yet created an account, click the 'Create Account' button in the upper right corner of the page
There is a help button, a button to create an account. There is a place where I can enter an email address and a password.
Pressing the Help button I learned that I can probably bypass this silly screen by disconnecting the internet. Is there a better way to bypass this screen and turn off Cisco Connect Cloud?
I have had the EA 3500 router for about three months.
The Parental Control of Cisco Connect Cloud block all site except YouTube ! I have the Parental Controls set up to "Block the Internet" at "Specific Times". The other popular sites are blocked: Facebook, The Chive, Tumblr, etc. But for some reason she is still about to view YouTube all day long!
It has the latest firmware. I spent about three hours on the phone with Cisco tech support about this. They uninstalled and re-installed the router - it still doesn't work!
Is it possible to force a reboot of the EA4500 through the Cisco app for the Cloud?
View 2 Replies View RelatedDo i need to reset the router after the install all seems good the new firmware installed with no issues.
View 2 Replies View RelatedI am considering the Subject router to add Wi-Fi to my home LAN, so I may take advantage of the wi-fi capability of my new Dell Laptop.I find the word "Cloud" disturbing. I thought the Cloud involved temporary storage on the internet.Will this router function to connect my 2 desktops and the laptop without a connection to the internet?
View 1 Replies View RelatedWe are currently looking to upgrade (re-design) our wireless network at our college. Any experience going from a local, controller-based wireless network to a cloud-based controller? If so, what have you found the pros and cons to be?
If you thought about going to a “cloud solution”, what stopped you?
We are currently running wireless at our 3 primary campus locations, and looking to add it to our 3 satellite locations. We use 4402 WLCs at our primary locations with a mix of 1140 and 1240 APs.
Can not connect computer to Cisco Connect -.Receive error msg 82BD0305. Reset to EA3500 to default and reinstalled software.
View 8 Replies View RelatedI have a wireless Linksys E1500 router, and for quite a few months now, my router just stopped working properly. It quit, I unplugged everything and plugged it back in, and it worked, but from that point on, it's been displaying this:
I've tried changing the Ethernet cables
I just bought the e1000 router today and I'm already having trouble. I got it setup the first time and all my computers set up with it and it works fine for internet. Everything is snappy and responsive and I don't have any of the problems I did with my old belkin. However, I am unable to connect to the router using cisco connect or the web interface. I need to forward ports, configure wireless security, etc etc. All I did was disable the guest account through cisco connect, and then when the software just sat there doing nothing with the spinning circle in the middle, I opened task manager and killed the process to get it to go away. Now I can't connect using either cisco connect or the web interface.
View 7 Replies View RelatedWe are trying to navigate the waters in choosing between a in-house, controller-based, wireless network solution or a cloud-based solution. We have been presented with the usual suspects in cloud-based (Aerohive, Meracki, etc) and with Cisco (5500) and Aruba on the other side. We are a multi-campus organization with approx. 200 APs.Any hard reasons why go with a controller-based vs. cloud-based solution? If we must keep the conversation limited to Cisco, why go Meracki over Cisco's WLC solutions or vise versa?
View 1 Replies View Relatedmy website by hiding behind cloud computing. the address is they have is: 173-203-243--138.static.cloud-ips.com They constantly add web abuse postings on my website.
View 4 Replies View RelatedI am running a zyxel nsa-325 series Network Storage device with 6 TBs of HD space. This NAS has a Linux kernel and 512mg of DDRIII ram. It is also running a Polkast personal cloud application that enables access to all the files through a simple UI rather than having to use FTP server login credentials (which I have also set-up).My home office is set up with Frontier as the ISP and they provide a locked down router/modem that you are not "supposed" to replace. It is made by speedstream and does not allow editing of the dns server or anything else that would be considered needed.I have set it up as the primary router with an ip range of 192.168.0.1 with a subnet of 250.250.250.0..I have several devices (printers, PC's etc plugged into this device via lan.Wireless broadcast and access is disabled...
My primary router is a Sapido 5000 series Gigabit router.I have this router broadcasting a wirelessB/G/N siganl for mobile devices to connect to. The NAS that I opened the thread with is plugged into this router via lan (Cat7).The Ip range of this router is set at 192.168.1.1 with a subnet of 250.250.250.0.All devices on the sapido router have access to the internet, as well as the services of the first router (networked printers, and speedstream router login for admin if needed).I can access the Zyxel NAS (192.168.1.104) from the PCs (192.168.0.2) connected to the speedstream, as well as the mobile devices and laptops (192.168.1.110-150) connected to the sapido.I have installed polkast which is an application that runs in the background on the NAS. It allows web access to all of the files (work docs, multi-media, ebooks, iso files, batch files for utilities etc. from a cell phone, tablet, pc, laptop, any device I want. I should be able to access the files from the web and also on the local WLAN to allow file transfers from the NAS to the device in seconds..When I am on the WLAN I can copy/stream a video file that is approximately 1GB in seconds. However, When I am on 3g 4g or at another location I do not have access. Polkast has simply said that I have an incorrect network configuration. I have confirmed that allk the Polkast side settings are fine and their user support has also confirmed that everything is as it should be. So they insist that the problem lies with my 2 routers. Their suggestion was to go back to using 1 router (HeeHee). I can RDP into any computer on my network from anywhere in the world. So the configurations seem fine. I also have FTP access to the NAS so I believe the ports are all forwarded correctly.
One of my client has BSNL leased line with LAN IP POOL we configured those on ASA 5510 nad Internet working fine but from cloud we are not getting any response for ping requiest please find running configuration below:
ciscoasa(config)# sh run
: Saved
:
ASA Version 8.2(1)
[Code]....
We have about 200 spokes (2811 routers), each one connected to two hubs(7206VXR with NPE-G2) via a separate DMVPN. DMVPN is over MPLS cloud provided by the local operator. On the hubs we get very frequently these type of messages
.Feb 9 16:00:10.402: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 200: Neighbor 10.X.X.X (Tunnel3) is down: Interface Goodbye received.Feb 9 16:00:11.658: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 200: Neighbor 10.X.X.X (Tunnel3) is up: new adjacency
On the spoke
Feb 9 13:36:48: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 200: Neighbor 10.X.X.X (Tunnel0) is down: holding time expiredFeb 9 13:36:51: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 200: Neighbor 10.X.X.X (Tunnel0) is up: new adjacency
I think the default eigrp hello and holding timers (5,15) are not suitable since these are wan links.
I have a requirement to monitor all traffic going from the internal LAN to the cloud. The LAN is a layer 2 VLAN which spans multiple Cisco 4507 switched and other smaller switches.
The VLAN has an IP address which the hosts use as the default gateway.
The exit port is on a Cisco 3600X switch connecrted to 4507 #1 via a 10G fiber link. 4507 #1 connects the rest of the LAN. Those switches interconnect via 10G fiber and 1G copper links.
Currently the monitor host is connected to a 1G copper port, configured as a monitor port, on one of the backside 4507s The switch manager says he has the switches configured so that I can see all traffic on the VLAN.
I have an ASA 5505 that during preak usage, likes to lose it's connection to the cloud for 50 seconds. The device is alive and kicking, can route between different interfaces, but it's connection to the cloud dies. This happens every 45 minutes or so during our peak internet usage.
the nastyness of the config, I was having issues getting PPTP pass-thru to cooperate, and never cleaned up after myself.
Result of the command: "show run"
: Saved
:
ASA Version 8.2(1)
!
hostname THEMAN-ASA
[Code]....
I need to confirm internet access from remote network through MPLS cloud to another site. Let me explain. We have a MPLS network with Wind stream as listed in the visio drawing; site 1 has internet access through the Time-Warner cloud for all users. Site2 has internet access through the Wind stream MPLS router. Site three has no internet access, and only has LAN access layer2 through Windstream routers to Site1 for networks 192.168.0.0/24, 10.1.1.x/24. My question is can we give everyone at Site 3 internet access through the MPLS network down into Site 1 using the Time-Warner ISP cloud.
I placed routes on the Site 3 3750 stack IP route 192.168.50.x 255.255.255.0 to the interface of the MPLS router at site3, then at site 1 we have IP route 192.168.50.x 255.255.255.0 to the MPLS interface, and able to ping all anything on the 192.168.50.0 network. I added the IP route 0.0.0.0 0.0.0.0 192.168.50.x the MPLS router interface, we do not have internet access at Site 3 using Site 1 network.
I confirmed at Site 1 from the Cisco 3750 switch we can ping 4.2.2.2 = Google. How to confirm this will work and what’s required to complete this connection to give everyone at site 3 internet access through Site 1 Time-Warner.
I have a WRT54GS which works fine with Linux both from both wired and wireless computers using Linux. But I reinstalled Win XP and now I can't reestablish a connection following the EasyLink advisor. I did have a connection under Win XP before.
The last instruction on the Easylink advisor tells me to look for something marked "local" I don't find that word on the screen.
When I try to go to192.168.1.1 it says connection interrupted. If i use the Cisco Connect it tells me i am not connected to the internet. My pc is connected via ethernet cable. My son can pull it up on is laptop and is connect the our Linksys E3000 wirelessly. I can go online, I just cant get to the router.
View 9 Replies View Related