I am considering the Subject router to add Wi-Fi to my home LAN, so I may take advantage of the wi-fi capability of my new Dell Laptop.I find the word "Cloud" disturbing. I thought the Cloud involved temporary storage on the internet.Will this router function to connect my 2 desktops and the laptop without a connection to the internet?
View 1 RepliesI can't to put the security on my D-Link N150 some pepeol us my wifi some time.
View 1 Replies View RelatedI have a d-link n150 model (wireless router) that i cannot get to pick up the signal of an 3G mobile broadband optus prepaid stick when pluged in. I have reset the router settings multiple times and nothing. Nether had a router before this one .How do i fix this problame and is it possible that the problame is in the settings of the internet stick?
View 3 Replies View RelatedMy WinXP Home PC won't connect properly (limited connectivity/no internet) via ethernet cable to my router (Belkin N150). Ipconfig /all shows the IP address as 169.254.117.71 but this is determined by an entry in the registry at HLMSYSTEMCurre....'DhcpIPAddress' - REG_SZ - 169.254.117.71. Also listed at 'IPAutoconfigurationAddress'. My laptop connects fine plugged into the same port getting it's IP automatically (192.168.2.2) and getting internet fine. I've tried adding a DWORD entry 'IPAutoconfigurationEnabled' = 0, also tried deleting the 2 values.Tried setting the IP manually to 192.168.2.6 - limited connectivity goes away but I get no internet connection from the router nor file sharing.
View 6 Replies View Relatedi have two routers in my home one is my main router which is Netgear N600 and another Airlive router that is acting as a access point in the second floor attached by an ethernet cable from my firs router (Netgear n300). I bought WD 3TB network storage and plugged it to my Netgear router, i am able to access my files wirelessly from WD without any problems. However, i can't access WD if i am connected to Airlive.... well i can but it takes time to appear in my finder and when i tried to install quick view for WD it can't find WD in the network if i am connected to Airlive but it dose appear as soon as i am connected to Netgear.
View 4 Replies View RelatedI have a Dell Inspiron 1525 laptop. It will not connect wireless to my Belkin N150. It use to, then one day it quit. I have an HP laptop and it connects wireless just fine. So I don't think it is the router. I have tried to reinstall the router. And the PC tells me there is a network available, but it will not connect. My question is... Can the wifi card be bad? Is there a key combination that might have been put in by accident?
View 1 Replies View RelatedI have not yet hooked up my router, N150. What I would like that after I hook the router up and then deside I don't want to use it. How do I disconnect it and go back to using my DSL modem and being connected to the internet?
View 3 Replies View RelatedI have tried Intel tools and latest drivers ( w/ and w/o pro wireless utility) but cannot pass thru code 10 error. Tried uninstall and install....as earlier card 4965 agn worked fine but seems like some conflict is stopping successful 5300 agn driver install.
View 20 Replies View RelatedHow do I get past this slow connect cloud b.s.? Now it's stopping me from logging into my router all together. I keep getting a message "we've encountered an unexpected error" blah blah blah. I can't get past it. I've already rebooted my router.
View 9 Replies View RelatedJust recently had Frontier WIFI router installed. How do we set up our Dell laptops to run off that WIFI without going through the process of selecting which signal we prefer process?
View 1 Replies View Relatedi am using dlink DIR-600L wireless router, the problem is i can connect to any device only if my laptop is on, the moment i swtich off my laptop my other devices dont work on wifi
View 2 Replies View RelatedI am interested in running the EA6500 without all the Cloud Connect software etc. Is this possible? Is there a basic way to set this up without that requirement?
View 1 Replies View RelatedIs it possible to force a reboot of the EA4500 through the Cisco app for the Cloud?
View 2 Replies View RelatedThis issue seems to happen about once every week or so. I get the router settings all configured and I'm able to access it from Cloud Connect and from the APP on my smartphone. After about a week, it's no longer accessible from cloudconnect, I can access it from my smartphone, but it shows that there are no devices connected (when they are actually connected). The screen for cloudconnect will come up after I sign in, but it just has the circling dots in the center of the screen saying "waiting" and it will do this until I close out explorer. The only way I've found to resolve this is to reset the router and set everything from scratch.
View 4 Replies View RelatedKeep having trouble with login onto my router (EA4500)Every now and then it will work but more often than not when I try to access it using either myrouter.local or 192.168.1.1, I keep getting an unexpected error message in the middle of the screen and it will go no further. Or I get no error and just a blue background with no icons or anything.
I tried going back in the firmware to what it was when I bought the device which is non-cloud (Ver.2.0.37.131047), but when I did that, I was logging into the router perfectly but had no internet access at all even tho all the gateway and dns details were present on the status page for the internet.
I've put it back to the cloud firmware (Ver.2.1.38.138880) and i'm back to these login problems again so I tried as per request with a cisco advisor in live chat to totally reset the router using the reset button at the back. Oh that caused problems getting things back online as every time I tried to access the interface I got a 502 error. I managed to get back online using the cisco disc that came with the router but now I'm back to square 1 with these access problems to the router.
I just can't see what is wrong here, it was fine prior to it updating itself to the cloud software, but it has been problem galore ever since.I am running Ubuntu Linux and have tried both firefox and chrome browsers which doesn't seem to matter.I have tried my sons laptop running vista which gets the same problem.I have tried disconnecting everything else on my network apart from my PC (the linux one) which is ethernet cabled direct to the router.The cloud app for my HTC does work but has very limited settings and runs extremely slow.
Might be worth mentioning that this morning when I tried accessing from google chrome, in the error box also popped up the following message, 'error_get_networks', this is the first time I saw this message so don't know if its of any relevance. I do have set in the settings that my DHCP server starts at 192.168.1.201 and most of the computers in my house have a static IP address so I don't believe anything is clashing to cause any errors.
Do i need to reset the router after the install all seems good the new firmware installed with no issues.
View 2 Replies View RelatedMy EA4500 router now automatically goes to Cisco Connect Cloud, and I can no longer access my router directly through my browser. I do not want to use Cisco Connect Cloud, for security reasons, so how can I disable the automatic access to the cloud? Use of the Cisco Connect Cloud should be optional, and not mandatory. If the cloud is the only way I will be allowed to make changes in my router, I may just have to return it to the store. Can this "feature" be turned off?
View 9 Replies View RelatedI recently purchased a EA4500 for my home network. After hours of searching, I couldn't find any evidence to how I can install a USB printer without the obvious Cisco Cloud Connect. I don't need any software or account to access my router over the net nor any of the features CCC provides (at least as of yet). I'm quite comfortable with using the web interface and easily managed to adjust the router for everything I need except the printer part. I certainly have things to print so I have to connect my printer to the router as it is clearly mentioned on its box that I can access my printer through it. As a last resort I tried to install the software on the CD that came with it to get a link for some "Cisco VUSB" software which I think is the solution but it keeps saying my modem is not connected to the net. It clearly isn't because I don't have an internet connection at home. What I have is a 3G connection which I use for communicating and downloads I need. So why do I need an internet connection on the router for anything and how do I install my printer?
View 3 Replies View RelatedI bought an EA3500 because I found that I did not need the more expensivbe router. The problem that I have now is when I sign in to Cisco Connect Cloud both the old and the new router show up. I would like to remove the old router from the list. The old router shows as:CiscoA3518 [offline]
View 6 Replies View RelatedI know that Cisco Cloud Connect was released fairly recently. I also know that the e4200v2 was supposed to be a supported router from last generation for Cisco Cloud Connect. However, when I go to the upgrade firmware option on my router settings, it says that I have the most up to date firmware.
How do I get CIsco Cloud Connect setup on my e4200v2? Would I simply follow the manual install instructions for the ea4500 with the firmware for the ea4500?
I'm hoping that the updated firmware will fix an issue I'm having with getting a Seagate Expansion hard drive detected for the media server portion since I know a closely related hard drive was in the list of functioning external hard drives for the Cisco Connect Cloud firmware.
Before upgrading my firmware on my EA2700, I can easily reserve IP address for my wired device. With the new cloud interface, I click to select the device from the top pane to bring it down in the reserved IP pane below. When I try to save the IP change I get two errors: 1) Invalid characters in the device name 2) Invalid IP address. I get the same errors even if I do not edid not edit the name or IP address.
As for the device name, I did not change anything or rename the device. One device has a " - " in the name and the router was happy with it until I tried to reserve the IP. Another one had a " ' " in the name, same problem again.
My network DHCP range is set to 192.168.1.200 to 192.168.1.250 and I use the range from 192.168.1.1 to 192.168.100 for static IP. When I tried to reserve a static IP below 192.168.1.200, the router say that is an invalid IP.
The workaround to this problem has been to temporary set the DHCP range to 192.168.1.1 to 192.168.1.50 and set the static IP in that range and rename the devices to a name that the EA2700 will accept. Next I move the DHCP range from 192.168.1.50 to 192.168.1.100 and repeat the process. After, all the static IP are assigned, then I can reset the DHCP range to 192.168.1.200 to 192.168.1.250.
This is a pain to do. In the previous (cloud less) version, this was a breeze to do. Also, I have not figured out how to redirect ports with the new interface. Is that progress?
Installed my new EA4500 and trying to access my PC from internet (remote desktop) in order to do so I need to forward the TCP port 3389. In the old web admin page this option was easy to find and change. with the new cloud connect I can't find it. how do Ienable port forwarding on the EA4500?
View 3 Replies View RelatedI just purchased an EA3500 because I absolutely need guest access. I set everything up through the Cisco Connect application on the CD and all was well. I figured it's time to get into the whole cloud connect app thing, as this is why I chose this router over another but after creating the account and activating through email, I constantly get the message that I need to associate my router with my account.The PC I am using is directly connected to the router through a cable. I'm not sure what else I am to do at this point. The content of the entire message basically is telling me to head to [URL] with the PC connected to the router that I want associated and to follow the directions.
1. There are no directions... I get that message every time.
2. I've tried rebooting the router and then logging in to the website - that gives me a message saying there's no router detected, meaning that somehow the site IS detecting the router, I just somehow haven't associated it.
I have EA4500 router with latest firmware update. Cisco Connect Cloud behave strange. Some devices connected to the wireless router appear in CCC and some not. For instance, Iphone is visible, Ipad is not but both have normal accesss to internet.
View 2 Replies View RelatedUsing CCC with EA4500, where do I find the control for enable/disable broadcast of the SSID?
View 5 Replies View RelatedI know this is a "home" router, but there are a lot of common vulnerabilities that can be detected.
1. Is there any intent to offer a firmware update for the Non Cloud Connect option.
2. Does Cisco intend to make the Cloud Connect Firmware "feature complete" compared to the Non Cloud Connect?
3. Is there going to be support for Stateful DHCPv6?
I tried to log in into my EA4500 today, and instead of the simple window that asks for the user name and password, I am getting a Cisco Connect Cloud log in screen. It is very strange.
At the top it says: Cisco Connect Cloud/Powering Linksys Products
and below that:
Sign In If you have not yet created an account, click the 'Create Account' button in the upper right corner of the page
There is a help button, a button to create an account. There is a place where I can enter an email address and a password.
Pressing the Help button I learned that I can probably bypass this silly screen by disconnecting the internet. Is there a better way to bypass this screen and turn off Cisco Connect Cloud?
I have had the EA 3500 router for about three months.
The Parental Control of Cisco Connect Cloud block all site except YouTube ! I have the Parental Controls set up to "Block the Internet" at "Specific Times". The other popular sites are blocked: Facebook, The Chive, Tumblr, etc. But for some reason she is still about to view YouTube all day long!
It has the latest firmware. I spent about three hours on the phone with Cisco tech support about this. They uninstalled and re-installed the router - it still doesn't work!
I need to connect my wifi to my dvd player but it haveapasswork and it cannot connect, so i need to take off the passwork so that i can connect.
View 1 Replies View RelatedHow to set up my router just for my home connection.Already did some basic stuff to it but i just want to add more security to avoid unwanted user trying to hog my internet connection......
ISP: Globe Broadband (HUAWEI router)
Wireless router: TP-LINK WR340G
I really want to learn about this stuff and btw everytime i turn on my Routers Firewall (TP-LINK) i lose connection its like blocking the Globe's internet connection to me.
Trying to get a password for my n150 wireless
View 2 Replies View RelatedI can't seem to get my Canon MG5220 Wireless Printer to connect to my Belkin N150 wireless router. The printer sees the belkin wireless router network name but cannot connect to it( after entering the correct security key). It worked fine with a previous wireless router. My desktop PC is connected to the belkin router via direct ethernet, and I want to be able to access my wireless printer which is located in another room from my PC. I think I remember reading that the canon mg5220 may not support WPA2 security, but Its only a year old and would prefer not to regonfigure my router's security setting. how I can get this printer to connect to my router?
View 2 Replies View RelatediI downloaded belkin n150 router where do I find network security key
View 1 Replies View Related