D-Link DCS-942L :: Stuck On Saving When Changing Setup Settings
Jan 23, 2013
When I change a setup setting and click save settings, most of the time it gets stuck on the "saving..." notification window and eventually I get a "Internet Explorer cannot display the web page" notification. However I have found that if I repeatedly try it eventually it will accept the change. This never happens using the wizards only making manual changes. I am running the camera with a Wi-Fi connection. I am not sure this is a router or camera firmware bug (running V1.12)
View 4 Replies
ADVERTISEMENT
Apr 8, 2012
I need to change my DCS-942L camera settings remotely when I am not connected to my home wireless network. When I am at home, I just type in the local IP address of the camera (192.168.0.100) into my browser to access the firmware. How can I do the same when I am away from home and obviously not connected to the local WiFi?
View 1 Replies
View Related
Feb 11, 2013
Region : Canada
Model : TD-W8961ND
Hardware Version : V2
Firmware Version : 2.0.0 Build 120608 Rel.34612
ISP : TekSavvy
NAT is enabled (under PVC2), as is UpNP
Whenever I enter all the info for a port forward under NAT in the virtual server tab, I click 'save' and nothing happens; chrome and firefox both give the same result.If I go to a different screen after pressing save and then come back to NAT settings, there's no entry updates and no port forwards.Should I install a different firmware (I can't find a newer version to install) or is NAT not supposed to work under PVC2? If I don't enter proper info (like leave the ports blank) I get an error if I press 'save', asking me to finish entering all the required info.
View 2 Replies
View Related
May 24, 2012
I have a broadband connection and recently I bought a new D-Link wireless router for accessing internet on my Android phone via Wi-Fi. Router model no. is N 150 DIR-524.After configuring it was working fine for a week or so and then one fine day internet stopped working on my PC and router LED for internet was not glowing as well. So I called my ISP and they changed my ethernet card settings (nVidia).They changed the 'Speed/duplex settings' from 'Auto Negotiation' to '10 Mb Half Duplex' and then the internet started working. During this they had disconnected my router. Once they were gone, I reset the router and connected it back. Since then it ain't working Internet works fine when the cable is plugged directly in the ethernet card but doesn't work when plugged via router. Router does everything right from opening the '192.168.0.1' page to saving the settings. But there's no internet access.
View 8 Replies
View Related
Jul 1, 2012
I have 3 Dcs-3420's on the same network same static ip setup and they never have issues. Im testing 1 942L, I've upgraded firmware to1.11, but periodically the camera loses its ip address which is weird because it is set static. My wireless is set to Mac address security. Now camera is outside in a shaded area, over night the camera worked all night, this morning it has reset three times. Additionally, each time it resets/losses ip address it also loses the manually set time.
View 1 Replies
View Related
Jan 17, 2012
Had just purchased a new DCS942L unit and had it setup fine. Registered it on the web and the web stated that it needed a firmware update. Connected with hard line and started update. After 5min webapp said device timed out. When I went to rest camera could no longer get a connection of any kind.
View 1 Replies
View Related
Aug 19, 2012
the 942L is up and running but I ain't getting no email snapshots nor video clips.I think the menu for setting up the "Video Clip" and "Snapshot" is severely lacking info for users like myself; what to type in the smtp field, the sender or recipient email fields, and especially not username and password. Do I put my email username and password there, or my MyDlink login email and password?
View 1 Replies
View Related
Apr 17, 2012
On a Microsoft xp network when we log off or shut down (randomly) users will have their computers lock or freeze at saving settings. The network is school district with around 1000 computers total.
-We think it is an issue with DNS or DHCP but we can not find anything only about our issue.
-It occurs randomly, but seems to target certain machines more. In a lab about 3 quarters of the computers are not affected and the other quarter will have it happen, but not every time. It will happen on student, teacher, and admin accounts.
-It has "spread" to 3 buildings now. At first it seemed to be an issues at one building but over the course of a week two new buildings are affected.
-No major changes in our network over the past month either.
View 5 Replies
View Related
Mar 6, 2013
I have 3com router and it is working fine. The issue is that when I am taking the router out of the electricity and reenter it back it will not save my settings and I will have to log in again to change the settings.
View 1 Replies
View Related
Jan 23, 2011
I have a laptop that travels alot to different networks. I go to two differnent networks where I need to enter static network settings (wireless nic). How the heck do you save these settings so I don't have to enter them all the time. I know you can save the network profiles but does this save static settings assigned to the wireless nic?
View 3 Replies
View Related
Sep 5, 2012
I just recieved a WAP4410N and managed to log in to the web interface. It is not allowing me to change many settings. I try to change the wireless network mode and click on save and it goes back to disabled again.
P.S. I have just upgraded the firmware to 2.0.3.3 and tried to set it back to the factory defaults. neither worked.
View 1 Replies
View Related
Jan 27, 2011
What do the broadcom power saving mode settings mean? If power saving mode is enabled, what is the time it takes to go into power saving mode? What does fast mean?
View 1 Replies
View Related
Mar 10, 2012
I have my 942L set up for continuous recording. When I look at the files, the camera will record between 20 and 55 seconds, end that file and start another. The next file then starts between a few seconds and as much as 40 seconds later leaving a gap in the video recoding. The file sizes are all different and the amount of record time is different for each file.
Also, about 80% of the time, the time increments a few seconds on a playback and then stops updating even though the video is longer.
View 4 Replies
View Related
Aug 5, 2012
I just got the camera today, looks good, works good, at least so far.. BUT I was SURE this camera had a battery and charge function!? What's the point of having this camera if I can't place it say inside my car or in the garage (where it needs to be hidden, alas I can't use any cords!)?
View 5 Replies
View Related
Mar 5, 2013
There are several features that don't work and are returning errors. For starters, when trying to save settings for media/device prioritization I am receiving a 2123 error message. Unable to save settings. EA4500/N900 Router, Cisco Cloud Connect.
View 3 Replies
View Related
Jun 15, 2011
Every so often (random amounts of time) my internet setting either on the router or pc change and then I it comes up with an error that my settings aren't the same as my router... I use a Orange Live box and windows 7. also when I want to sign into games for windows that sometime crashes the internet and on DOW2 and minecraft.
View 10 Replies
View Related
Nov 8, 2011
Is there a way to set up Quick VPN on the RV120W without changing the internal subnet? I have just taken over responsibility for a network and I don't know all of the nooks and crannies yet, so I'd rather not change the internal sub net. I've tried setting up a user then changing the LAN settings afterward, but it automatically removed the VPN user when I did so.
View 1 Replies
View Related
Apr 4, 2011
I had a disaster occur on my "guest" OS within VMware-Player. I had to start over from scratch! I am back in business, except for having the virtual machine recognized by my existing wireless network. The other two computers still communicate.I went through the wireless setup routine for the new VM. A new "ID" was assigned. Obviously, this is different from the one currently in use on the network. I have the settings info on a flash drive. Can I simply insert the FD in the other two computers and have the new ID replace the existing one?
View 14 Replies
View Related
Feb 15, 2012
After changing these NIC settings I am no longer able to connect to the internet:
checksum offload -> disabled
speed/duplex -> 100 mbps full
I tried setting it back to what it was before to no avail:
checksum offload -> Rx and Tx Enabled
Speed/Duplex -> Auto Negotiation
I'm still able to ping URLs and IPs, but cant get to any websites or even the modem page. I tried rebooting,power cycling...nothing works so far.
View 2 Replies
View Related
Jun 17, 2011
bought a second hand laptop but all previous owners details are still in. they must have been on a dial-up network want to change to broadband,how? also need to sort out wifi.
View 1 Replies
View Related
Mar 6, 2011
I have a RCA modem from comcast high speed internet.Also have a Linksys Cisco Wireless-N Gigabit Router model # WRT310N V2. When I connect the internet directly into the computer, I get download speed up to 21.07 mbps and upload speed of 3.07. When I connect through the router download speed 1.31mbps and upload speed of 1.01.I have no clue how to make changes to the router.
View 19 Replies
View Related
May 30, 2013
I have an Ubuntu 10.04 and basically I would like to achieve this:When I am at home, switch the network to use static IP.When I am at the office, switch the network to use DHCP.
Is there a program to do this?Or is this something that should go inside an init script where if it is weekend or weekday from 7 pm to 7 am, then consider it a home. If it is home, then use static IP.?
View 5 Replies
View Related
Apr 24, 2012
I am working on installing a new 2500 Controller with 2 AIR-LAP1242G's attached to it. I have both registered and on the controller but I am having trouble moving one of them to a new IPS AP group that I created. Furthermore, I noticed the default gateway is missing from the static ip settings and I am unable to add that as well. When I add the default gateway and hit apply, the controller does nothing. Same thing for when I try to change my WIPS device to monitor mode.
A couple other things that I noticed is that when I go to AP groups and try to remove the AP's from the default group, there is no remove button when you go inside the default group like I see when i go into my IPS group.The AP's are on software ver 12.4(23c)JA3 Boot ver 12.4.13.0 and the controller is at 7.0.22.0I have already power cycled the controller and both AP's.
View 1 Replies
View Related
Apr 8, 2011
I have a new DIR-655 and have successfully added three access policies. I am trying to add a fourth, and have gone through the wizard making all the necessary entries. After saving, I get back to the list of existing policies, but the one I just added does not appear.
View 2 Replies
View Related
Jan 30, 2012
I have 1.00 build 0522 and searching the support website I see no link. But reading here I see there is a later version.
View 1 Replies
View Related
Jun 2, 2013
I have configured my new 3850 using the command line and all works well. I logged into the web interface expecting to see device manager with a pretty image of the switch etc.
However I am presented with the Express Setup page and even if i fill in all of the details again and click submit then nothing happens and this is all I can get.
I have version 03.02.01SE software.
View 11 Replies
View Related
Jul 21, 2011
I have bought a new WRT54G2 router since the old one broke down. When I log into the 192.168...and click wireless, it takes me to this window that says Searching for your Client Device....If you haven't clicked wi-fi protected setup button please do so now. It's stuck at 98% and I click on the bottom middle button with the 2 arrows constantly and nothing is happening.
View 5 Replies
View Related
Nov 10, 2012
The company has a glitch that they are not sure if they will fix so you can't record with mac. I am unable to return my cameras to staples and Im out the money for the memory cards I opened. It says you can record with MAC clearly on the box!!!! Bad business practice for STAPLES and DLINK.
View 3 Replies
View Related
Jun 26, 2012
I installed an IP camera, and had to change my E1000 router settings to a static IP address. Now I can't access the router settings. 192.168.1.1 is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place. I'm not very good at this stuff, and it's a small miracle that I did it once.
View 4 Replies
View Related
Jul 9, 2012
iphone and android app but no blackberry.
View 3 Replies
View Related
Jan 4, 2013
I just purchased 2 cameras and have one set up.
Firmware V 1.12
Works great on my android phone and connects fairly quick. When I try to see the camera image on my PC with windows 7 64 bit, I log into my d-link and it shows the camera name on left side of screen, then says Java run time environment not installed.I uninstalled java 5 times and re installed both 32 and 64 bit but keeps coming back as not installed. Camera is set up wirelessly through a Belkin router, so far no EZ config
View 8 Replies
View Related
Mar 27, 2013
Is there such a possibility in the firmware or through telnet?
View 3 Replies
View Related
Apr 13, 2012
As DCS-942L IP cam is compatible with "NVSCGI APIs" (search this string on a search engine and you will find some useful PDF docs), many features of this IP Cam may be enabled or disabled using any web browsers, for example we can manage the motion detect.
[url]....
View 3 Replies
View Related
