Wireless :: Connect To Network But No Internet Access?
Apr 24, 2011
i just hooked up a dlink router at home so i can use my laptop in different rooms. i have a desktop in one room and the internet works fine but when i hooked up the wireless router i can connect to the network but it says no internet access so i cannot get online my brother in law is really good with computers and i called him and tryed doing a bunch of different things like changing the web address and such but nothing will work.
View 4 Replies
ADVERTISEMENT
Nov 30, 2012
My Laptop stopped having internet access. I am able to connect to my Linksys (says Limited Access) but then it states I do not have internet access. I read other forums and tried to do the "command prompt" but when I try to run as administrator it tells me "The specified service does not exist as an installed service". I am using Windows Vista and McAfee as my spyware.
[code]....
View 11 Replies
View Related
Jan 26, 2012
i would like to know that how to stop internet access through network complete internet access
View 2 Replies
View Related
Apr 4, 2012
I have 4 computers (3 laptops, 1 desktop) in a shared office. We get internet access using their wireless network. All works fine. However, I need to share a printer amongst all of the computers. The printer is LAN enabled and I would normally just put all the PCs on a hub, together with the printer and share it that way. BUT my question is can we access the internet using the wireless network and the printer using a separate wired network at the same time?
View 7 Replies
View Related
Aug 2, 2012
About a month ago i was able to create ad hoc wireless network to connect my iPod to wifi. And then not to long ago, i had some kind of virus problem which caused me to get Norton 2012. But now when i try and create a wirless network it says that there is no internet access. But i use my laptops internet with a yellow wire connecting from my laptop to my modem. And the interent works perfectly fine. So i do not know why my interent wont allow me to use a wirless network.
View 1 Replies
View Related
Aug 27, 2012
Just to set the stage, we used to have a network which ran in the following order:
For wired workstations: bridged DSL modem->wireless Linksys E900 router->Dell PowerConnect 2824 switch->2 modular 4-port jacks->individual workstations For wireless: bridged DSL modem->wireless Linksys E900 router->workstations The workstations were set up to pick up IP addresses automatically.After an infrastructure upgrade where we added some Cat6 cables and swapped the modular jacks for a patch panel, we lost all connectivity. I restored the connectivity to the wired workstations by assigning IP addresses. But we have no wireless and I cannot access the router GUI at its IP address (even when plugged directly into the router). All the workstations show the default gateway as 192.168.10.1, so I don't know what's going on.
View 3 Replies
View Related
May 12, 2011
I can connect to my router with full strength no matter where I am in my house. But the moment the router leaves my sight, I can no longer connect to the internet. I just recently set up this router and the internet was working completely fine at full speed no matter where I was; then all of a sudden I had to be within direct sight of my router just to connect to the internethere is a 6 meter distance between my router and my room. between that is a plasma tv and one wall. I don't live in a concrete bunker with 6ft thick walls.There is only one conflicting channel in the area and it is channel 1. Changing between different channels has no effect. rebooting the router has a momentary effect where I am able to connect in my room at full speed, but it eventually dies and I lose connection again.
View 3 Replies
View Related
Jan 16, 2012
I have a Windows 7 machine that is a client to an old SBS 2003 server. I don't use the server but once a month anymore because there is some old software that I need to keep on it. I also don't want to use the server for internet access anymore. I just use a wireless adapter on the client machine for internet connection. My problem is that I can either use my wireless adaptor for internet access or connect to my server. I can't do both at the same time (I get the "multiple networks red x") and no internet access.
View 4 Replies
View Related
Dec 26, 2012
How do I connect my wireless access point router to the internet so that I may use my ipad?
View 2 Replies
View Related
Sep 8, 2011
i am able to connect to unsecured wireless networks but when i connect alll of them say no internet access i only notice a yellow warning sign beside those signal strength bars also and not on secured one !
View 2 Replies
View Related
Jul 4, 2011
At home I have a wireless access point that I use to connect my laptop #1 to the Internet. On laptop #1 IP address is set to 193.49.21.65. This IP address also Subnet Mask and other addresses are given by my Internet Service Provider. Everything works just fine but lately I bought another laptop (laptop #2) and now my aim is to connect both laptops to the Internet. Unfortunately, I can't make that happen. Only one of my laptops having IP 193.49.21.65 set can connect to the Internet.
[URL]
So is there any way to have an Internet connection on both of my laptops without having to buy any new equipment?
View 1 Replies
View Related
Feb 29, 2012
my primary source of internet at my house for the passed year is an at&t 3g usb modem (sierra wireless lightning), becuase i live in the middle of nowhere (only other option is satellite). Up until now i've been using a wireless ad hoc network to share the connection with multiple computers. I just purchased a cradlepoint router that is compatible with my usb modem so I can have a "real" wireless network in my house. I set it up yesterday and so far its working great, I have a wii streaming netflix, an android tablet, an iphone and two laptops (running vista, and win7 respectively) currently connected. The problem is my 3rd laptop, also win7. It is my primary computer that I use for business and absolutely essential that its connected to the internet. It (seems) to connect to the wireless network just fine, but gives me a "no internet access" error.
This laptop will connect to other wireless networks: it always connected to the ad-hoc, it will connect to my wifi at work and the network at my boyfriends house, also i just tried it with the verizon 3g mobile hotspot app on my droid and it connected right away. It also works just fine with a wired connection to this router (ethernet). I'm not sure where to start since every other device in my house is working with this network and this laptop will connect to other wireless networks.
ps/ Going through the windows onscreen troubleshooter it will either tell me "there is a problem with your broadband modem" or "There is a problem communicating with DNS server" (but it wont fix it)... and after going through endless google searches, i've done everything thats been suggested so far (making sure dhcp is enabled, powercycling the router/modem, updating drivers, ipconfig release/renew, disabling the firewall).
View 18 Replies
View Related
Nov 21, 2012
has a netbook which on this one, the network is not working. He connects to the wireless router and gets an ip but he does not have access to the internet.When I tried the netbook at my house with my wireless, it worked perfectly and it stopped working again on my friend's network.
View 7 Replies
View Related
Jan 21, 2011
Wireless network is connected but no internet access
View 2 Replies
View Related
Jan 10, 2012
I am running a Netgear wireless N-300 router from my RoadRunner modem. I installed the network early last week to no problems. A few days ago the wireless devices wouldn't connect. They recognize the network, but will not connect to the internet. I have given them their own IPs with the router, and shut off DHCP...this didn't work. I've obviously tried to power cycle the router and modem....this didn't work. I can't seem to find a fix. My android devices connect to the network just fine, but otherwise if it isn't connected via wire, it won't work. I've also tried to connect things without the android devices connected just in case it was interference, and that didn't work.
View 2 Replies
View Related
Feb 17, 2013
My lan ip is 192.168.1.10 an wireless is automatic plssend me the settings to get both together
View 1 Replies
View Related
Dec 23, 2011
can connect to the network but not the internet. In IPCONFIG it says media is disconnected. In properties it says adapter is not connected. But I can see the network, I can ping every computer on the network, just can't get to the internet.Reinstalled all the drivers, tried renew, netsh commands, flushdns, disabled & reenabled. 2 other computers connect to the internet and each other with no problem. Can connect to other WI Fi's too, but still no internet access.
View 8 Replies
View Related
Dec 1, 2012
When I try to connect to the Internet it says that I am connected but have no Internet access. When I use the troubleshooter it says wireless network configuration does not have a valid ip configuration. I also tried using the Ethernet cable but it still says no Internet access.
View 8 Replies
View Related
Jun 23, 2011
I can not connect to my home wireless network (we did change routers back in Dec and did at that time have problems as well getting it to connect) the router is a Linksys E2000.when I checked further I saw that the IP address was different than the ones on my other laptops so I changed those settings by adding the new IP address..
[code]...
View 1 Replies
View Related
Nov 3, 2012
Two days since i had a power shutdown in my building so i had to disconnect both the modem and the routerfter i reconnected them my wireless network is shown and i can connect through my hp laptop but it keeps showing the Message "unidentified network not internet access". Other laptops and my ipod have no problem at all. I've tried following some tutorials that told me to disable and enable the network, i've checked that my ip is obtained automatically.
View 1 Replies
View Related
Jan 25, 2013
The problem is I can't connect to my router, It says "unable to connect to wireless network" . Been trying to 5 days now to fix this, Not getting anywhere.Laptop is, HP Pavilion g6 Notebook, My network wireless adaptor is realtek rtl8188ce 802.11b/g/n.
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Pentium(R) CPU B950 @ 2.10GHz
RAM: 4.00GB
Graphics Card: Mobile Intel(R) HD Graphics Family
View 4 Replies
View Related
Apr 4, 2011
The only thing that will connect to my wireless network is internet explorer. I have tried Firefox and other programs I have that require internet and they will not connect.
View 1 Replies
View Related
Aug 27, 2012
I have a home ADSL2 Modem Router. I have 3 computers connected to this wireless network and also with Internet access. However, I have 1 notebook connected to the wireless network but saying No Internet access.
View 13 Replies
View Related
Apr 30, 2012
ive recently bought a tcl internet enabled tv. I have tried connecting it to the wireless network and it keeps giving me an error that the "connection failed due to timeout".
View 5 Replies
View Related
Mar 26, 2012
I have two separate wireless networks in my house, one of them is for sharing my NAS data and the other is for Internet.problem is when I connect to the NAS network and after that I change my network to the other network, I can not connect to the internet ( I can connect to the wireless).
Just after restarting I can see the Internet
View 4 Replies
View Related
Apr 2, 2012
the site has a private wireless network for which I pay a yearly access fee. This gives me a code I can use to gain access each time I connect. We used to be able to have all our family's laptops, etc., connected at the same time using this code, but the site has recently changed the configuration so that we can't do this. Is there any way we can share the connection made by one computer so that we can all access the Internet at the same time? The site is in a remote location that gets poor mobile data coverage and landlines are not an option. The yearly fee is already high, so I can't afford to pay for multiple subscriptions.
View 1 Replies
View Related
Jul 31, 2012
I have a Windows 7 computer that was built by ibuypower. It's great, but I ordered a rosewill wireless adapter for it and noticed that my connection strength and speed are both pretty terrible. I went on amazon and bought a TP-Link wireless adapter(TL-WN822N). I installed the most recent "V2" drivers from their website and upon disabling my rosewill adapter and enabling the new TP-Link adapter, I was able to connect to the network, but not access the internet. I have tried power cycling the router, using the reset switch on the router, restarting my computer, and a bunch of commands that I found on this site. Is it possible that I have a defective adapter?
Also, some more information: My isp is comcast and the router is from them as well. Here is my ipconfig /all log for the rosewill adapter(internet access):
Quote:
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : Trauma
[Code]......
View 10 Replies
View Related
Mar 30, 2011
He's getting a error saying Unidentified Network. After letting fail windows troubleshoot I got 2 errors. The first was "The default gateway is not available, the second was Local Area connection doesn't have a valid ip configuration. Here's what Ive tried so far.I tried in safe mode. Ethernet works here so I assume is a software issue?Uninstalled and reinstalled the drivers. disabled and enabled, nothing..I tried going into configure network card and giving Network Address a random 12 digit value and that failed.Ive tried updating the drivers but I cant because Dell wants me to their download manager into the computer that has no internet to download the drivers /facepalm..I basically ran out of ideas. This is a Dell Studio laptop. It has 2 network cards a wireless and a Ethernet, the ethernet card is a Realtek PCIe GBE Family Controller, The wireless DW1501 Wireless-N WLAN Half-Mini Card
View 5 Replies
View Related
May 24, 2011
We have a D-Link DI-524 wireless router that has had no problems until today. Our laptops (with Windows XP), iPods, and iPhones all show that there is an excellent wireless network connection (as usual), but none of the computers or devices will connect to the Internet. I tried resetting, rebooting, and unplugging the modem and router. The router and modem seem to be fine. When we disconnect the router and plug the laptop directly into modem, we have Internet connection (i.e., it's not the IP).
View 4 Replies
View Related
Sep 14, 2012
There is a problem with establishing an internet connection between my laptop and any wireless network, and hence the internet cannot be accessed. Though, the connection can be established locally between my laptop and the wireless network for a short while before the connection is lost locally. There is certainly no problem with my current wireless router as there are internet connections between the wireless network and other devices. Prior to using the current wireless router, I used Linksys WRT54G for internet connection until recently when there was no connection between all devices and the Linksys wireless router, so I changed my wireless router to the current one. However, the problem still persists for my laptop. I can only get access to internet when my laptop is connected to the router using ethernet cable, as well as when my laptop is connected to the main cable modem using the same cable.My laptop model is Fujitsu Lifebook S Series and my laptop is running on Windows Vista Service Pack 2 and my current wireless router is Belkin N300 Wireless N Router Model F9K1002v1.What I have done so far are that I have ensured that the DNS client and DHCP client service are enabled and that I have used the method of "/release, /dnsflush and /renew" on the command prompt.Below is the /ipconfig /all description when this laptop is connected to the cable modem using ethernet cable:
Windows IP Configuration
Host Name . . . . . . . . . . . . : FujitsuUser-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Broadcast
IP Routing Enabled. . . . . . . . : No
[code]....
View 14 Replies
View Related
May 9, 2012
I have a Comcast SMC8014 cable modem connected to a Linksys BEFSR81 Router and a Netgear Prosafe 24-port 10/100 switch connected to one of the LAN ports on the router. There are many PCs connected to this network, including one used as a file server. I would like to add a LINKSYS WRT54GL wireless router to this mix to allow visitors wireless access to the internet and network printers but NOT allow access to the file server
View 7 Replies
View Related
Aug 2, 2012
I have a Free Community WiFi that I can access from the edges of my house, but not from anywhere inside the house. My personal Internet connection is out due to the fact our bill trippled for some reason we can't figure out 2 months ago without telling us. We've had an auto payment sent every month for just over what it should be. So until I get this sorted out with the ISP I have to use the community WiFi. I would like to be able to use the internet from somewhere other than the wall in my kitchen.
So, I have a number of Routers, 2 Actiontec Q1000s, but only 1 power suply, a D-Link WBR-2310, D-Link DIR-601 & a few other ods & Ends including a 12DB Amped Wireless & An 8DB Hawking Tech antennas.What I want to do is to use 1 router to connect to the CommunityShared Network, A wired connection to another router (Preferably the Q1000 as it's already setup for my Home Network) & that router to serve my Home Network, preferably over the WAN port if possible, but I can run VPNs on each device for a week if I have to.
Right now I have one computer setup in the kitchen with a High Gain Antenna conected to a Atheros SUB-362 EXT USB WiFi card, (This computer gets 7Mbps Down & 9Mbps Up) then the built-in WiFi card connected to my Home network with a Static IP, The Q1000 set to use that IP as the Gateway. I can get about 200Kbps max on devices connected to the Home Network. But the biggest problem is that my old Atheros card disconnects randomly when accessed from one of the devices on the home network. I'm fine with a ThirdParty Firmware Update on the D-Links if necessary.When I look online I only find posts about how to extend a network using a second router or how to use a specific router to repeat or bridge.
View 1 Replies
View Related
Mar 6, 2013
We have the RV180W router and the WAP321 access point in our business. We want to broadcast two SSIDs from both locations: the office SSID, which shares routing to LAN traffic, and a guest SSID.The office computers are attached via ethernet to a switch off of LAN port 1 on the router. The AP is attached to LAN port 2 on the router.On the router, the office SSID and the LAN are members of VLAN 1. The guest network is a member of VLAN 2. From the router, everything works just fine.On the WAP, the staff SSID works fine, but the guest SSID has no internet. Both the office and guest networks get DHCP successfully from the router.Our VLAN membership table in the router and WAP are attached, as well as other configuration details.Why would we not be getting internet on the guest ID only on the WAP?
View 8 Replies
View Related
