Unable To Connect To Wireless Network Or Access Router GUI
Aug 27, 2012
Just to set the stage, we used to have a network which ran in the following order:
For wired workstations: bridged DSL modem->wireless Linksys E900 router->Dell PowerConnect 2824 switch->2 modular 4-port jacks->individual workstations For wireless: bridged DSL modem->wireless Linksys E900 router->workstations The workstations were set up to pick up IP addresses automatically.After an infrastructure upgrade where we added some Cat6 cables and swapped the modular jacks for a patch panel, we lost all connectivity. I restored the connectivity to the wired workstations by assigning IP addresses. But we have no wireless and I cannot access the router GUI at its IP address (even when plugged directly into the router). All the workstations show the default gateway as 192.168.10.1, so I don't know what's going on.
View 3 Replies
ADVERTISEMENT
Jul 1, 2012
I just purchased an EA3500 because I absolutely need guest access. I set everything up through the Cisco Connect application on the CD and all was well. I figured it's time to get into the whole cloud connect app thing, as this is why I chose this router over another but after creating the account and activating through email, I constantly get the message that I need to associate my router with my account.The PC I am using is directly connected to the router through a cable. I'm not sure what else I am to do at this point. The content of the entire message basically is telling me to head to [URL] with the PC connected to the router that I want associated and to follow the directions.
1. There are no directions... I get that message every time.
2. I've tried rebooting the router and then logging in to the website - that gives me a message saying there's no router detected, meaning that somehow the site IS detecting the router, I just somehow haven't associated it.
View 1 Replies
View Related
May 11, 2012
I have a Linksys E1500 wireless router that I have had for about 3 months and it has been working great up until today. I realized non of my wireless devices could detect the network, so I got on my PC which is hard wired to the router and it to says it had no network connection. So I power cycled both the router and the modem. When it came back up, this PC that I am typing from now has an internet connection but is says it is connected to Network 2 instead of the routers name for the network. My other PC that is hard wired to the router says its not connected to the network, and when I open up the Cisco Connect software it tells me my router is not plugged in. Also, nothing works wirelessly.In the web control panel it still has all my setting intact but still looks like its not connected to the internet.
View 1 Replies
View Related
Jun 24, 2012
This was for a WRT160n v3.0.02 I looked up several suggestions online and decided to update the firmware to v3.0.03 This seemed to only make it worse as I could no longer connect, and when I turned the router off and back on it would allow me in for about a minute and drop me right away.I started tweaking with the settings, and came across some posts here such as this one, started tweaking with the channel settings and everything. Nothing. If anything I somehow made it worse since now instead of dropping repeatedly it wouldn't connect at all except for about a minute after restarting router, then it would drop completely (I would either get the limited access notification or I simply couldn't connect and windows said to unplug the access point. I recalled I had another Linksys router that I wasn't using in storage, a WRT54G2v 1.0.01 so I set that up, no problems... at first. All other devices picked it up right away, but once again, my new laptop decides it's too good for the freaking network and drops it repeatedly telling me there's a problem with the access point.
So at this point I'm thinking it might NOT be my network, but my wireless card or something, I uninstalled and reinstalled, updated drivers, (I use a Realtek RTL8723AE Wireless LAN 802.11n PCI-E NIC) I even came across this article and disabled browser service and NETBios (including all other devices on my network). It brought back the network on my laptop for a bit, only to smugly come crashing down again.
View 2 Replies
View Related
Jan 3, 2012
I have a WRT610N which does not allow me to connect any new devices to the wireless network. This is a recent problem as I have been able to connect new devices before. Devices on the wireless network, those that have been on the network, are able to disconnect and reconnect. Just new devices are excluded. Have gone through the admin screens to see if something is amiss but can not find anything.
View 5 Replies
View Related
Dec 29, 2011
I am unable to connect the Asus PCE-N13 (Windows 7 host) to the WRT610N V1.0 N network. The adapter does not see the N network on the LinkSys but there are other N networks in the list. I have updated the latest drivers. My PC Laptop, Macbook Pro, and Xbox 360 connects to the N network.
View 2 Replies
View Related
Jul 19, 2012
I have a Linksys WRT120N which had suddenly and unexectedly stopped working after disconnecting my roku box. I didnt worry about it until I got an Iphone and now .I was able to re-establish the wireless connection on my netbook today after a ton of research and messing around with the settings and then downloaded network magic, which finally fixed the problem. I believe that it automatically transmitted the WEP key to the Netbook, which is what I am missing when I try to log into the network on the Iphone.How do I get this password to show up on Network Magic? When I look at the settings, it does not show the actual numbers, they are hidden.
View 6 Replies
View Related
Jul 2, 2006
I recently installed a new router - WRTP54G . I used to have our 2 machines on a home network. However, that is all gone now. When I open My Network Places on my pc, nothing at all appears. On the other pc only the shared folders on that pc appears. I've tried running the network wizard several times and to no avail. I've checked the permissions and everything else I can think of, but it still doesn't work. I believe it is probably something simple to fix, like checking the right box, but I haven't found it yet. Both machines are running XP Home and I have an external drive attached to my pc. Everything worked fine till the installation of this new router. Should I just create a new network? Would that just be easier? One more thing, I got the error that says Home is not accessible. You might not have permission to use this network resource. Contact admin of this server to find out if you have access permission. The network path was not found. Of course, I am the admin.
View 9 Replies
View Related
Dec 12, 2012
I am unable to connect my Ipad3 to my home network (WRT160N router). It has been working for the last 8 months, and stopped working after I installed Direct TV App on Ipad..It detects the network, but not accepts the PW.... I have multiple wireless devicess connected to my network without any problems..The funny thing is that my neighbor brings his ipad to my house and he is able to connect..My ipad connects to any other network...just not my home network.. I contacted Apple who spend hours with me on the phone and suggested doing a full reset on the ipad, but still did not solve the problem..I called and already paid for linksys support ($62.95) who spend hours with me on the phone, but suggesting: "maybe you need to buy another router"...REALLY!!!! Again, I have 3 Smart TVs, Xbox360, and Wii, that are connected to the network just fine .even my neibor comes with his Ipad3 and connects to my network just fine......and I can connect with my ipad to any other network without any problems... BTW, I have already removed the DirectTV app from the ipad....but I still cannot connect to my network..
View 2 Replies
View Related
Mar 11, 2012
I have a Linksys Wireless G Model WRT54G2V1 using WEP encryption. I recently added a laptop. It can access various non-decured netowrks. It can see my home network but is unable to connect despite entering the correct passcode. how to get the laptop and secured network to communicate?
View 1 Replies
View Related
Sep 7, 2012
I have an EA2700 running latest firmware 1.1.38.138827. It is using Cisco Connect Cloud. I am unable to access the DHCP Reservations link under Connectivity/ Local Network. When I click on it, nothing happens. I've tried multiple browsers including IE 10 (Windows 8 RTM), Firefox 15, and Chrome 21. I also tried on a Windows 7 machine with IE 9 and the link doesn't work on that either except that it shows a box that says Invalid Character when I click on the DHCP Reservations link. I see no invalid characters on the screen. Any workaround other than downgrading the firmware or assigning static IPs on individual PCs?Also, on an unrelated note, where is the Dynanic DNS configuration on the Cisco Connect Cloud?
View 8 Replies
View Related
Jan 28, 2013
network conection directly from router is ok but through 24 ports switch i am unable to connect
View 1 Replies
View Related
Jan 18, 2013
I am unable to connect to my home wifi from my laptop but it connects fine at work. All other devices (2 androids and 1 laptop) are able to connect to the home network. My laptop used to connect intermittently earlier - sometime the connection would be restored when i reset the router or restarted the laptop but now I'm just not able to at all. The message i get is either "Limited Access" or "Unidentified Network. No internet access" - the signal strength always is excellent. I have tried switching off and on the wireless router, have disabled and then enabled the wireless connec on the laptop, have reconfigured the wireless network on the router with a new network name and password but nothing works. However I am able to connect to the internet using the network cable - there were a few times where I couldn't do that either. I've tried browsing on several forums to get answers but haven't found any yet. [code]
View 12 Replies
View Related
May 19, 2012
I've recently reinstalled a fresh windows xp operating system onto an old laptop. I've been through some trouble getting the drivers installed, but now I've finally completed that.[URL] I cannot connect to my home's WEP secured wireless network to which I have the password. After I followed the steps detailed in the link, instead of saying "detecting network type," the loading bar says "waiting for the network..." and after about 30 seconds, it disappears and nothing happens.I can connect to my router by directly connecting it with an Ethernet cord without a problem. And I know that the laptop is capable of connecting to a wireless network. I was able to connect to a nearby neighbors unsecured wifi, however it was with a very slow connection due to the distance and weak signal. It will just not connect to my own.
View 14 Replies
View Related
Nov 11, 2012
My son's laptop suddenly stopped being able to connect to the internet via wireless. I can see it okay but just unable to connect. I've checked the drivers and they are up to date. It shows on my network when wired and I've checked with the virus software and I can see no reason for it to be blocked.
View 11 Replies
View Related
Nov 25, 2012
i cannot connect to a certain wireless network. The router can take upto 4 laptops and this one will be the third so itis not a question of to many.All the other laptops can conect to the router when the pass key is put in but this computer will not. This computer will connect to other networks but not the one at home. When i put the pass key that it asks into the computer it says that it is not the right one. What am i doing wrong or is there something missing from the computer. Not very experienced at this so be patient and spell it out in laymen terms
View 1 Replies
View Related
Nov 19, 2011
I bought a brand new psp today and was trying for last 2 hours to connect it to my wireless network but each time it display an error code 8041160B. I called my internet service provide and we changed the WEP key but i am still getting the same error code. One weired thing I noticed that psp shows only 8 digit WEP key while my key is 10 digit. I don't know why psp doesn't show the 10 digit key. Also, the same issue happend 6 months ago and i was told psp network is closed as people ids have been stolen so i returned my psp and it seems i will have to return it again.
View 1 Replies
View Related
Aug 25, 2011
I am unable to connect to a wireless network.
View 3 Replies
View Related
Jun 23, 2011
I can not connect to my home wireless network (we did change routers back in Dec and did at that time have problems as well getting it to connect) the router is a Linksys E2000.when I checked further I saw that the IP address was different than the ones on my other laptops so I changed those settings by adding the new IP address..
[code]...
View 1 Replies
View Related
Dec 17, 2012
Windows is unable to connect to the selected network. The network may no longer in range. Please refresh the list of available networks, and try to connect again.This message poped up during connecting to a wireless network
[code]...
View 11 Replies
View Related
Oct 28, 2012
I've problems connecting to my wireless network. i do not face this problem in the past until recently i've some problems with my laptop. after i re-format my laptop, i faced with this problem. here are some of the images i took.
View 11 Replies
View Related
Jan 25, 2013
The problem is I can't connect to my router, It says "unable to connect to wireless network" . Been trying to 5 days now to fix this, Not getting anywhere.Laptop is, HP Pavilion g6 Notebook, My network wireless adaptor is realtek rtl8188ce 802.11b/g/n.
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Pentium(R) CPU B950 @ 2.10GHz
RAM: 4.00GB
Graphics Card: Mobile Intel(R) HD Graphics Family
View 4 Replies
View Related
Feb 21, 2011
I am unable to connect to wireless network in my office. the configuration and all worked out just fine and I was able to connect unsecured, however when we put a key on there, I am unable to connect. I am even able to connect to my neighbour's unsecured network and I can connect to our wireless router via Ethernet cable.
View 9 Replies
View Related
Oct 3, 2012
I have had an Ipad for 2 months that has until today connected with my network fine. Now I can't get a connection but my laptop will connect fine.
View 2 Replies
View Related
Feb 9, 2011
Unable to connect to a unsecured wireless network that ive been connecting to for the last year for about a week today i was able to connect when first starting my laptop but after shutdown and restarting an hour later same problem odd thing i find is there are two other laptops in my home that have no problem connecting to this network at anytime i have very little knowledge of laptops or wireless networks.
View 1 Replies
View Related
Mar 16, 2011
I am trying to fix my sisters laptop before she goes back to college. The computer is suddenly unable to connect to the internet via wireless, but can connect perfectly fine with a cord. Also whenever I restart it says unable to reconnect all network drives.The computer is a Dell Latitude D630 Laptop running windows vista ultimate 32 bit, the network card is a Dell Wireless 1395 wlan mini-card.I took it over to some other places to see if it was just my router, which is a linksys e3000 and to no avail it still could not connect. I tried doing some system restores and that did not work either.
View 2 Replies
View Related
Feb 2, 2011
I am unable to connect my computer to a wireless network.
View 2 Replies
View Related
Nov 28, 2011
I stumbled upon a problem which i cannot resolve, the situation is as folows:
A router (Netgear wgt624v3) is connected to the internet. My smartphone and every other wireless device I tested is able to connect to it but not my laptop. My laptop is able to connect to any other wireless network. I can however get acces to the web using an ethernet cable plugged into the router.
I already installed the newest driver for my wireless network card (Atheros AR5B93 Wireless Network Adapter) and I already upgraded the router to the newest firmware. I also disabled every security including the built in firewall. The strangest thing is that I can actually find the SSID of the network, I just cannot connect to it.
FYI: I use windows 7 64bit, laptop type is Packard Bell LM86
View 5 Replies
View Related
Jun 27, 2011
I have a desktop computer which is connected to the router by cable, but when this computer is on I can't connect to the wireless network with any other devices.When I turn the main computer off though I can connect fine with any wireless device.
View 3 Replies
View Related
Aug 4, 2012
Last week I was using my laptop when suddenly it disconnected from the internet. I tried fixing it the next day, and even though there were full bars, it wouldn't connect to the network. I restarted my router multiple times and nothing. So, after a fit of anger and messing with different settings on my computer. For some reason, I was able to connect to the internet 2 or 3 times over the past week for about 10-15 minutes before it would disconnect me for the rest of the day.. So, I'm honestly so stumped. I thought maybe it might have just been my router, but I'm at my dad's house now and I'm not able to connect to his network, either. I might need to go ahead an order a new wireless adapter, but neither of us are that well with computers/networking. I'm hooked up via Ethernet cord which seems to be working fine, but my wireless is only able to read and not actually connect. (On occasion it will actually connect to the internet, but when it does I can't actually access the internet)I've tried uninstalling my wireless adapter, disabling/enabling it, a bunch of weird commands that I don't even know what they do (.. probably shouldn't have messed with those), stopping/restarting services, etc.
ipconfig /all with Ethernet unplugged
Host Name . . . . . . . . . . . . : Taylorrr-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 6 Replies
View Related
Mar 18, 2011
I recently got wireless internet in my apartment but am having trouble connecting to it. The other computers in the apartment are having no trouble. The network appears in the wireless networks list, but after I enter the network key it just loads with the "waiting for network" message until it times out. I can connect to other wireless networks. It takes a long time to connect to these other networks but eventually does, My computer is super old, but since I can connect to wireless I feel like the computer is not the issue.
View 2 Replies
View Related
Dec 5, 2011
I am using router aztech-hw550-3g. i have Service pack 3 on my laptop. I was able to connect to my router fine but from the last 3 days i am unable to connect to my wireless network. Whenever i am trying to connect it is showing me a msg as unable to connect to you preferred network. It's Dhcp configured network.
View 1 Replies
View Related
Sep 26, 2012
I've tried two operating systems (Ubuntu 12.04 and Windows XP) two different wireless adaptors (Dell M1530 internal adaptor and Alfa USB Adaptor which I get full bars on) and tried a different Dell M1530 laptop which I'm also having issues with. I've also tried to diagnose the network with a tool, but I'm totally unable to connect to it so I'm unable to get any more information.If I try to connect to an unsecured network, it works perfectly. I'm totally stumped about this, due to the fact that I've used two different operating systems, two different adaptors and two different laptops (albeit the same brand).
View 4 Replies
View Related
