Unable To Connect Ipad To Wireless Network

Oct 3, 2012

I have had an Ipad for 2 months that has until today connected with my network fine. Now I can't get a connection but my laptop will connect fine.

View 2 Replies


ADVERTISEMENT

Cisco Wireless :: 5508 / IPad - Unable To Connect To Corp

Sep 4, 2011

We have two SSID's Guest and Corp. We are using 5508 controllers.
 
The problem is that if an iPad user is connected to Guest SSID and then try to connect to Corp then it fails saying "Unable to connect to Corp". After 10-15 retires the same iPad connects successfully. The problem doesn't happen on windows PC. I have attached debug for one of the clients.

View 1 Replies View Related

Linksys Wireless Router :: E4200 IPad Cannot Connect To Network Through WPA2

Nov 18, 2011

My iPad cannot connect to my network wireless through WPA2 using router E4200 the way my Macbook is connected. Only using guest access i can get internet contact. Is this a known problem  with this combination and/or is it meant to be, that only guest access gives an iPad connection? 

View 6 Replies View Related

P660 NW - T1 Can't Connect IPad 2 To Home Network

Sep 14, 2011

I have a Home network via a Prestige P660 NW - T1 router which has worked fine but I recently bought an IPad 2 with Wifi but I can't connect to my Network with my Password - When I remove the Password and change the router settings to no authentication I can connect but I don't want to have no security on the router.Relatives have tried with their IPads and even though we all carefully put in the Password we cannot access the Network.

View 5 Replies View Related

Cisco Switching/Routing :: 1142 Apple IPad That Won't Connect To Network

Apr 16, 2013

I have an iPad 4 (6.1.3) that won't connect to our Cisco 1142 APs.  Full Cisco network; 3560 POE switches on edge and Cisco 6509 at the core.At first we looked at it as a wireless issue.  No settings changes on the APs would allow the iPad connect.  About 125 other iPads of various models worked fine.  Took the offending iPad to McDonalds and it connects fine.  Took the offending iPad to another school in our District and it connected and worked fine.  Went back to the home school, still won't connect.  Contacted Apple since iPad was under warranty, sent it to them and they ran diagnostics and it is fine.Is there anyway that the core switch is blocking the iPad client?

View 1 Replies View Related

Cisco Routers :: RV 180W - Connect IPhone / IPad Using PPTP To Home Network?

Jan 31, 2012

My use case is very simple I want to connect iPhone/iPad using pptp to my home network. I purchased the 180W and looks like I am not able to connect mobile devices to it. My Setup is simple I have ST536v6 (firmware 7.4.4) modem in bridge mode and Cisco RV 180W connect to my ISP using Ppoe. I followed the Admin guide and created the pptp user. If I connect from internal network it connects but when I try to connect the device from WAN it just does not work.
 
Cisco RV 180W
Firmware Version:1.0.1.9

View 7 Replies View Related

Unable To Connect To Wireless Network?

May 19, 2012

I've recently reinstalled a fresh windows xp operating system onto an old laptop. I've been through some trouble getting the drivers installed, but now I've finally completed that.[URL] I cannot connect to my home's WEP secured wireless network to which I have the password. After I followed the steps detailed in the link, instead of saying "detecting network type," the loading bar says "waiting for the network..." and after about 30 seconds, it disappears and nothing happens.I can connect to my router by directly connecting it with an Ethernet cord without a problem. And I know that the laptop is capable of connecting to a wireless network. I was able to connect to a nearby neighbors unsecured wifi, however it was with a very slow connection due to the distance and weak signal. It will just not connect to my own.

View 14 Replies View Related

See Wireless Network But Unable To Connect

Nov 11, 2012

My son's laptop suddenly stopped being able to connect to the internet via wireless. I can see it okay but just unable to connect. I've checked the drivers and they are up to date. It shows on my network when wired and I've checked with the virus software and I can see no reason for it to be blocked.

View 11 Replies View Related

Unable To Connect At All To Wireless Network?

Nov 25, 2012

i cannot connect to a certain wireless network. The router can take upto 4 laptops and this one will be the third so itis not a question of to many.All the other laptops can conect to the router when the pass key is put in but this computer will not. This computer will connect to other networks but not the one at home. When i put the pass key that it asks into the computer it says that it is not the right one. What am i doing wrong or is there something missing from the computer. Not very experienced at this so be patient and spell it out in laymen terms

View 1 Replies View Related

Unable To Connect Psp To My Wireless Network

Nov 19, 2011

I bought a brand new psp today and was trying for last 2 hours to connect it to my wireless network but each time it display an error code 8041160B. I called my internet service provide and we changed the WEP key but i am still getting the same error code. One weired thing I noticed that psp shows only 8 digit WEP key while my key is 10 digit. I don't know why psp doesn't show the 10 digit key. Also, the same issue happend 6 months ago and i was told psp network is closed as people ids have been stolen so i returned my psp and it seems i will have to return it again.

View 1 Replies View Related

Unable To Connect To A Wireless Network?

Aug 25, 2011

I am unable to connect to a wireless network.

View 3 Replies View Related

Wireless Network Connectivity On An IPad?

Dec 22, 2012

We just moved and had our internet service connected at the new house using the same service provider, wireless router and network we had at the old house. My PC can access the internet fine, but my wife's iPad cannot.

View 5 Replies View Related

Wireless :: Cannot Connect IPad To Windows 7 Work Group

Jun 25, 2012

I have an existing home network with several win7 and XP machines connected.I would like to connect a new iPad wireless to th same work group. The iPad connects fine to the network and can access the internet.However, the iPad doesn't seem to see the other computers in the work group I want to connect it to, nor do the windows computers see the iPad. This is surely due (at least in part) to not having specified the work group name on the iPad, which I cannot figure out how to do.

View 6 Replies View Related

Linksys Wireless Router :: Connect IPAD To WRT160n?

Feb 23, 2012

How do I connect IPAD to Linksys router WRT160n?

View 2 Replies View Related

Linksys Wireless Router :: E1200 Won't Connect To Ipad

Apr 21, 2012

We have just installed the E1200 wireless router.  We are able to access the internet from our home computers, however we cannot get the IPAD connected.  When we try to find our wireless network to connect to it doesn't display yet our we can still see our neighbors wireless networks.

View 1 Replies View Related

Linksys Wireless Router :: WRT320N - IPad Can't Connect To It

Jul 24, 2011

I have a WRT320N router with firmware version 1.0.01 build 008.  I just got an iPad and while it can find my router, I can't access the WiFi when I enter my password.  I can use the router with my laptop so I know the connection and password are ok.I've seen two administrators on here suggest the same thing.  And one person responded that it worked.  The identical directions were: 

Try changing some advanced wireless settings on the router.Connect the computer to the router with the Ethernet cable. Open the setup page of the router.Click on wireless tab and set the configuration view to manual. Change the wireless channel to 11. Save the settings.Go to wireless tab and click on Advanced wireless settings.Change Beacon interval to 75, RTS threshold to 2307 and fragmentation threshold to 2306. Save the settings.Try to connect to the wireless network again and see if that works.
 
1 - I think my computer already is connected to the router with the Ethernet cable - I mean there is an Ethernet cable attached to both my computer and my router - in slot 1 on the router

2 - the only thing I know how to access is the Linksys EasyLink Advisor.  What and where is the setup page of the router? 

View 4 Replies View Related

Linksys Wireless Router :: E2500 Won't Connect To IPad?

May 14, 2013

What should i do ?   Reset  ?  How  ? maybee i did not  set the cable properly  ( what is an ethernet cable ? )  the one i have is a short cable with what looks like telephone jacks at either ends.  one end is plugged in my comcast modem and the other into my mini mac.

View 1 Replies View Related

Cisco Wireless :: WLC 5508 - Connect IPad And Printer 802.1x

Dec 1, 2012

We have a remote location with 1 LWAPP AP connecting to a 5508 WLC. We are doing 802.1x auth/wpa2 on 1 SSID for iPads to connect to. Now we want to simply connect a printer to print wireless using AirPrint from the iPads. The problem is how to get the printer connected to the wireless network specifically to the sane SSID? Will the printer need to support 802.1x or have the ability to do certificates? Is there a better way to do this.

View 5 Replies View Related

Window Is Unable To Connect To A Wireless Network

Dec 17, 2012

Windows is unable to connect to the selected network. The network may no longer in range. Please refresh the list of available networks, and try to connect again.This message poped up during connecting to a wireless network

[code]...

View 11 Replies View Related

Unable To Connect To Home Wireless Network

Oct 28, 2012

I've problems connecting to my wireless network. i do not face this problem in the past until recently i've some problems with my laptop. after i re-format my laptop, i faced with this problem. here are some of the images i took.

View 11 Replies View Related

Unable To Connect To Internet By Wireless Network

Jan 25, 2013

The problem is I can't connect to my router, It says "unable to connect to wireless network" . Been trying to 5 days now to fix this, Not getting anywhere.Laptop is, HP Pavilion g6 Notebook, My network wireless adaptor is realtek rtl8188ce 802.11b/g/n.

OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit

Processor: Pentium(R) CPU B950 @ 2.10GHz

RAM: 4.00GB

Graphics Card: Mobile Intel(R) HD Graphics Family

View 4 Replies View Related

Unable To Connect To Secured Wireless Network

Feb 21, 2011

I am unable to connect to wireless network in my office. the configuration and all worked out just fine and I was able to connect unsecured, however when we put a key on there, I am unable to connect. I am even able to connect to my neighbour's unsecured network and I can connect to our wireless router via Ethernet cable.

View 9 Replies View Related

Unable To Connect To Unsecured Wireless Network

Feb 9, 2011

Unable to connect to a unsecured wireless network that ive been connecting to for the last year for about a week today i was able to connect when first starting my laptop but after shutdown and restarting an hour later same problem odd thing i find is there are two other laptops in my home that have no problem connecting to this network at anytime i have very little knowledge of laptops or wireless networks.

View 1 Replies View Related

Unable To Connect Via Wireless / All Network Drives

Mar 16, 2011

I am trying to fix my sisters laptop before she goes back to college. The computer is suddenly unable to connect to the internet via wireless, but can connect perfectly fine with a cord. Also whenever I restart it says unable to reconnect all network drives.The computer is a Dell Latitude D630 Laptop running windows vista ultimate 32 bit, the network card is a Dell Wireless 1395 wlan mini-card.I took it over to some other places to see if it was just my router, which is a linksys e3000 and to no avail it still could not connect. I tried doing some system restores and that did not work either.

View 2 Replies View Related

Unable To Connect Computer To A Wireless Network

Feb 2, 2011

I am unable to connect my computer to a wireless network.

View 2 Replies View Related

Connecting IPad To Windows Wireless Network?

Dec 28, 2012

When trying to connect my ipad to my windows wireless network it asks for a passwordIs this the same thing as my network key?

View 4 Replies View Related

Linksys Wireless Router :: Can't Connect Iphone / Ipad To E1500

Mar 22, 2012

i got my ps3 & xbox to connect it was easy but when i go to connect my iphone it doesnt even let me put my password in it just says"cant connect"?

View 3 Replies View Related

Linksys Wireless Router :: IPhone And IPad Cannot Connect To E1500

Jun 26, 2012

I recently connected E1500 to time wanrner cable modem for my home. 3 laptops work fine, but iphone and ipad can not connect to wireless. But iphone and ipad connected to linksys guest automatically.

View 4 Replies View Related

Belkin Routers :: Cannot Get N150 Wireless To Connect To Laptop Or IPad

Jun 3, 2013

I cannot get my belkin n150 wireless router to connect to my laptop or ipad - wireless connection was working but stopped - so i attempted to re-configure the ip protocols on the router using the 198.168.2.1/ password - changed the ip setting on the belkin page but did not reset or set address (DHCP).

View 1 Replies View Related

Linksys Wireless Router :: Connect Ipad To E1200 As Another Computer?

Mar 26, 2012

I don't want to allow any Guest access to  my network, but I do want to connect my iPad to my network. I've successfully added another computer to the network but the router setup seems to want the iPad to connect only as a Guest .Is there a way to treat my iPad as another  computer (not as Guest) so that it my network recognizes it in the same way it recognizes the second computer (without entering a password)?

View 1 Replies View Related

Cisco VPN :: ASA 5505 - Unable To Browse Web With IPad / IPhone Using Ipsec?

Apr 6, 2013

I really worked hard not to write this question here but here I am. I am trying to route all traffic through vpn but I cant browse the web. It seems no traffic goes through the vpn tunnel. Split tunneling works but it doesnt route the traffic through vpn tunnel.  I have a cisco asa5505 with base license,
 
When I try to browse the web with one of the clients  I see lots of 
 
6Apr 07 201309:40:5510.10.50.136088410.10.10.153Built inbound UDP connection 834 for outside:10.10.50.13/60884 (10.10.50.13/60884) to outside:10.10.10.1/53 (10.10.10.1/53) (xxxx
  
messages but at the end I see " Safari could not open the page because the server stopped responding" message or smth similar. 
 
My setup is 
 
Vpn Clients         ======  asa5505   ==========   CiscoLinksysEA4500 Router   ========  ISPProvidedFiberConverterDevice(huawei)
10.10.30.10-10.10.30.50            10.10.10.2(outside int)               10.10.10.1(inside)  PPOE(outside)

[Code].....

View 1 Replies View Related

Cisco Routers :: Unable To Establish VPN Between RV180W And IPad Via PPTP

Mar 8, 2013

I have tried to make a VPN connection between RV180W and iPad with PPTP. I have enabled the server, set the address range, added and user and enabled it.
 
I entered the same information into iPad but when I try to start the VPN, iPad just tried to make connection and finally fails with an error stating that PPP server cannot be reached.
 
I think the devices are able to make some kind of connection as if I change the gateway IP address incorrect, I get a different kind of error message. I also tried to reboot the router...

View 4 Replies View Related

Laptop Finds Wireless Network But Is Unable To Connect

Nov 28, 2011

I stumbled upon a problem which i cannot resolve, the situation is as folows:

A router (Netgear wgt624v3) is connected to the internet. My smartphone and every other wireless device I tested is able to connect to it but not my laptop. My laptop is able to connect to any other wireless network. I can however get acces to the web using an ethernet cable plugged into the router.

I already installed the newest driver for my wireless network card (Atheros AR5B93 Wireless Network Adapter) and I already upgraded the router to the newest firmware. I also disabled every security including the built in firewall. The strangest thing is that I can actually find the SSID of the network, I just cannot connect to it.

FYI: I use windows 7 64bit, laptop type is Packard Bell LM86

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved