Connecting IPad To Windows Wireless Network?
Dec 28, 2012When trying to connect my ipad to my windows wireless network it asks for a passwordIs this the same thing as my network key?
View 4 RepliesWhen trying to connect my ipad to my windows wireless network it asks for a passwordIs this the same thing as my network key?
View 4 RepliesI have an ipad that is not able to connect to a 1142 Autonomous AP. This AP was originally a light weight AP and then downgraded to autonomous.A strange thing i see is that the AP shows me only two radios. 802.11 N(2.4 GHZ) and 802.11 N(5 GHZ). I suspected the AP not to support the b/g networks. i then downloaded the most recent software but i still cannot get it to connect and on the AP's GUI i only see the above two mentionned radios. i tried to connect to two SSID's. one using WPA2 and another with open authentication and no security.but this does not work. Is it possible that some 1142 do not support b/g networks?
View 21 Replies View RelatedHave set up Router OK. Created Flashdrive EZ
How do I connect my IPAD now to WiFi since there is no USB port on my Ipad??
Region : India
Model : TD-W8951ND
Hardware Version : V4
ISP : MTNL
I m using TD-W8951ND wifi router with MTNL connection. The LAN connection with PC works just fine but i m not able to connect my iphone or ipad with the router. I have reset the router many times and also retored my iphone but still no luck. Pl tell me what are the settings needed for wifi connections.. Currently i have set the wireless mode to 802.11 b+g+n. Setting it to just 802.11 b sometimes connects with the iphone but never with ipad.
IPods and IPads to connect to stand alone AP1131? My scenario is as follows:
There is a section of a campus that is covered by 14 stand alone AP1131 were I experience the problem. The security parameters are: 802.1x, wpa enterprise, tkip
The other section is under WLC also AP1131 but in this case in WLANs/Scurity/Leyer 2 I checked boxes:
WPA Policy, WPA Encryption TKIP
WPA2 Policy, WPA2 Encryption AES
Auth Key Mgmt 802.1x
Wonder if the fact that I chose WPA2, AES makes a difference with stand alone mode? Anyways I tried configuring AES in stand alone APs and it didn't make a difference since I could not connect either.
recently we have purchased Reflection - an AirPlay mirroring software. Basically install Reflection in the laptop and you can view the screen of the iPad or iPhone via wireless network. we have tested in home wireless network no problem, but when connect to the cisco network, the iPad didn't recognize the REFLECTION installed in the laptop.
we are running WLC 5508, WLAP AP-1331AG, we can ping from laptop to the iPad laptop and ipad can access network without any issue. there is no any application port has been blocked between the client via wifi extra details for REFLECTION: [URL]
How to connect a windows CE notepad on a wireless broadband?
View 1 Replies View RelatedI have an E4200 wireless router which is connected via USB to my Canon MX 308 printer. I am able to print from Windows computers that are connected to this router (via WiFi of course). My iPad 2.0 is able to connect to the internet via the router. However I am not able to print content from my iPad via the E4200 router (via Wifi using Cisco Connect software).
View 1 Replies View Relatedafter i had to replace my old router from lynksis for the wrt110, everything works except for the ipod touch and the ipad. what could be the issue?
View 8 Replies View RelatedI´m trying to connect them to my WLAN, for throubleshoot I create a new WLAN with WPA2-TKIP and a PSK, the devices didin´t connect to the WLAN.I also change the security to WPA2-AES with TKIP, it didn´t work too.
My best choice was to disable every security configuration in order to began the throubleshooting from zero, but even with no Layer 2 and 3 security, the devices didn´t connect to my Test WLAN.
I´m using a AIR-CT2504-K9 WLC with two AIR-CAP3502I-A-K9 AP, all the PCs and other brand cellphones and tablets work well.
Also I have a SOHO router on the office, and the IPad connect without a problem with that WLAN, but I need them to connect to my Cisco AP.
I have an existing home network with several win7 and XP machines connected.I would like to connect a new iPad wireless to th same work group. The iPad connects fine to the network and can access the internet.However, the iPad doesn't seem to see the other computers in the work group I want to connect it to, nor do the windows computers see the iPad. This is surely due (at least in part) to not having specified the work group name on the iPad, which I cannot figure out how to do.
View 6 Replies View RelatedI am looking to purchase the RV220W router. I am interested to know if I can use the iPhone/iPad to create a VPN connection to this router.I have seen a lot of conflicting information about this so I am looking for a confirmation.
View 15 Replies View RelatedI have the same problem: here is my ipconfig file:
Windows IP Configuration
[code]...
We've had an old netbeui network set up for a while now but recently switched over to TCP/IP so my computer (running Windows 7 x64) could connect. The other computers on the network are running Windows 2000 and XP.All the older computers are working, but I still can't get mine to connect. It shows up as "Unidentified Network: Public Network"I really don't know where to go from here. I don't know if it should just pop up automatically or if I am supposed to configure it somehow.
View 5 Replies View RelatedI have ASA 5520 running ver 8.3.(2)8 and configured for AnyConnect VPN. While testing for iPads and iPhones we noticed that on connecting it disconnects few times before finally connecting. These are the messages logged in the ASA.I don't see authenticatio as an issue. Results are better with wifi compared to 3G. [Code]
View 1 Replies View RelatedWe just moved and had our internet service connected at the new house using the same service provider, wireless router and network we had at the old house. My PC can access the internet fine, but my wife's iPad cannot.
View 5 Replies View RelatedI put just got a wrvs 4400N and when I replaced my old linksys router I can't access my network computers anymore. I'm I missing something or do I need to do some kind of setup?
View 3 Replies View RelatedI have had an Ipad for 2 months that has until today connected with my network fine. Now I can't get a connection but my laptop will connect fine.
View 2 Replies View RelatedMy kids have IPads and wish to connect to the media on my win7 system ??
View 1 Replies View Relatedwant get wifi password on ipad
View 2 Replies View RelatedI thought that you just turned on the IPad2 and it would automatically connect to my Dell Studio 5010 DW1501 WiFi Half Card to my new IPad2. No way, I have spent the best of 5 days trying everything including re-installing Windows 7 Pro including the latest DW1501 drivers, but to no avail. I just can not connect. I hear that there is a patch to make Windows 7 compatable with IPad?
View 1 Replies View RelatedHow do I transfer phoots from my ipa or iPhone5 to a windows 7 computer?
View 4 Replies View Relatedhow to transfer my photos on i-pad to my windows desktop.
View 6 Replies View Relatedwe recently upgraded our home router and have been having trouble ever since. Our old router was a Netgear one, so we bought a newer netgear model. Since installing the new one we can not get my daughters laptop, an iPad and ipods to work on the wifi. My computer is wired into the router and works fine, it is just the wireless. All of these things worked perfectly using our old netgear wirelss modem and all of them can find the wireless network on their list of available networks, they all say that they are connected with a good signal, but when they try to browse the internet or check emails, it comes up saying not connected to the internet. We even bought a range extender because we thought the signal might not be strong enough between the new router and my daughters bedroom which are at opposite ends of the house and on different floors, but it made no difference and wasn't a problem before.
Anyway, the router we bought is a Netgear N150 wireless modem router DGN1000, the cables are plugged in to ports 1 and 4 ( there is only 1,2,3 and 4 to choose from). The extender is a Netgear universal range extender WN2000RPT
I have tried turning it all off and back on again, have uninstalled it and reinstalled it, but still nothing. Daughters laptop uses Vista and she has McAfee security. Exactly as it has always been and has worked fine using our old wireless router, just not this new one.
Have a PC set up with a LINKSYS N2500 router. this is password protected for access to network I would like to monitor what one of my children is doing on the net - but they surf the net using an iPad
View 4 Replies View RelatedMy iPad cannot connect to my network wireless through WPA2 using router E4200 the way my Macbook is connected. Only using guest access i can get internet contact. Is this a known problem with this combination and/or is it meant to be, that only guest access gives an iPad connection?
View 6 Replies View RelatedMy laptop, windows 7, is telling me there are no connections available. My iPad and phone are connected. I've removed my wifi network and replaced it, I've restarted my laptop, I've deleted other networks.
View 10 Replies View Relatedhome router is a wrt160n v3 With my iPad I set up the built in IPSec VPN to my office's cisco gateway. I successfully get the VPN logo. With an RDP app, i can access my work network from multiple public locations from my iPad. At home, on my laptop, I start the cisco client then use the windows rdp, presto i'm in my work network. At home on my iPad I can activate the VPN, but I can not connect with rdp. I spoke with linksys support tonight they had me add port 3389 to port range triggering and disable the firewall on the home router. This didn't solve the problem. To recap: 1) I can connect to my work network with rdp from multiple public locations, but not at home with the iPad 2) I can connect to my work network at home with my laptop with the cisco client ant the windows rdp
View 6 Replies View RelatedI am trying to create a VPN on my Mac that I can access from my iPad in a remote location (work.) I have been using "iVPN" on the Mac to "distribute" the home Mac's Internet connection to the iPad. I have everything set up right and the VPN works fine and the iPad connects fine, just not when I am work, where I want it to work. The iPad tells me that it cannot connect to the VPN. I believe my work blocks VPN ports (1701, 1723 etc) I can do a google search from the iPad on the work WiFi so the connection is ok, but I believe those ports are blocked. If I connect the iPad to a restaurant's wifi for example, the VPN connects fine. What client can I use to create my own VPN at home where I can use a standard port like port 80 or something that is not blocked at work so that I can connect to the VPN from work?
View 10 Replies View RelatedMy home network is up to now all hard-wired, nothing shared etc.I just got an ipad though, so do want to have wireless available now. I would like the ipad wireless router to be isolated so that the desktops run no risk from getting a virus via the ipad wireless connection.So, I was going to buy another router - would I be able to plug that into the wired router, and the desktop also plugged into the wired router, would that keep every part of the network isolated from the others?
View 8 Replies View RelatedMy laptop (Windows 7) has problems connecting the the wireless network at my school. I can connect fine at home.When I get to school, my laptop picks up the internet - there is internet connection/wireless. But I cannot access the internet after I open the web browser. As a school policy, as soon as the browser is open, it is directed automatically to a "Web Authentication" page. But my laptop does not allow it to connect to that page.
I asked the IT technician at school and he said that there is a problem with the DNS connecting automatically. He changed the settings to do so, but when he opens the network protocol again, the DNS is changed back to a preferred DNS number and it will not allow me to automatically pick up the DNS when I am at school. (Once again, it works fine at home).
I have a Home network via a Prestige P660 NW - T1 router which has worked fine but I recently bought an IPad 2 with Wifi but I can't connect to my Network with my Password - When I remove the Password and change the router settings to no authentication I can connect but I don't want to have no security on the router.Relatives have tried with their IPads and even though we all carefully put in the Password we cannot access the Network.
View 5 Replies View RelatedI have a user with a Mecer laptop using Windows 7. For some reason the laptop isnt working correctly when connecting to wireless.When I choose auto IP settings it doesnt even want to connect to the wireless access point (and gives the laptop some strange ip that isnt even on the range of the network), when I enter IP settings manually it connects but still cant access the internet.When I take another laptop with Windows XP, it connects to the wireless and can access the internet NO problem with auto IP settings.
View 2 Replies View Related