The only thing that will connect to my wireless network is internet explorer. I have tried Firefox and other programs I have that require internet and they will not connect.
View 1 RepliesI can't connect to facebook on any browser on this laptop. I can access it from my iphone and from my friends' laptops, but this one isn't letting me get to the page at all. It just turns up with "this webpage is not available" (same with firefox and ie) when i try to go to facebook. I tried running Malwarebytes and Mcafee, but neither of those found any problems. I can't connect to accounts associated with my facebook account either, like Wanelo or Elfster, and I can't connect to downloaded programs that I logged into with my facebook account such as Oovoo and facebook chat. The only thing I can connect to on this laptop is m.facebook.com, the mobile site.
View 1 Replies View RelatedWe have an RV016 (hardware version 2, firmware version 3.0.2.01) behind a cable modem. Attached to this RV016 is a switch to which our other devices are connected. Among those is another switch, a wireless access point and our VOIP phone system.
The issue with this setup seems to be as follows:
The Mac machines at our office seem to be unable to get internet access reliably. What we have observed is that a connection to the wireless access point is made. Google will load fine, then when performing a search it comes back with either a dns lookup error or just says that the site can't be found. Sometimes sites will load just fine, sometimes they don't. Our Windows or Ubuntu machines in our office hardly ever have that issue, but they do on occasion. Essentially internet is usable on Windows and Ubuntu, but not on a newer Mac. Mainly three Macs are affected that run a newer OS. Two other Macs (older OS) seem to be fine. My coworkers (who have that issue at work) report that at home they do not.
The DNS servers on the router were set to our ISPs addresses. I have since changed them to opendns servers. The issue persists.
When connecting a MacBook directly to the cable modem, everything works fine. Since we are using NAT, I do need to use the router. There are devices attached to it that these users need to be able to get to.
I have a linksys wireless router and today I attempted to attach a epson wirellesss printer to the network. I used ssid and passwords I thought were correct and did not gain access. I want to know how I can retrieve the correct info. The data I used was from the initial setup of the router. I did have to swap it out during the warranty period and now have a replacement router.
View 1 Replies View RelatedI have been in charge of CW and now LMS 4.1. Since I am not a system engineer in profession, it has always been difficult for me to understand how to keep databases and log files in order and how to troubleshoot system related stuff, without causing any problems.I mean that besides setting jobs (device discovery, netconfig, usertracking, archiving and the like), what else do I need to check on a regularly basis, which jobs can I delete with safety, what kind o log rotation should I configure?For example, I have noticed that the ConfigMgmtServer.log is quite large (1,2 Gbytes).
View 10 Replies View RelatedI have been experiencing drops in my wired internet connection and a google search brought me to your forums.It seems to disconnect more often either during a call on my voip phone (a snom) or shortly after - as if a surge of usage makes it drop out?
[code]...
I have a SG200-50P. It had a problem with the PoE ports (didn't supply power to my Bosch POE security cameras) so I updated it to the latest firmware. Now it does recognize the cemeras and supplies power to them. However, there are a few problems:
1. The boot time is extremely long, maybe 15-20 minutes for it to become ready. I've tried to reset to factory default settings, push the reset button for 30+ seconds, and disconnect all the ports. The boot time was always very long.
2. Even thought it supplies power to the cameras, the PoE lights on the ports are not lit.
3. The log is filled with this error, posted every second.
21474345202013-Apr-12 11:40:23Alert%HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x12e6 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset 21474345212013-Apr-12 11:40:22Alert%HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x139c dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
Occasionally it has his error.
I'm having problems to ping through interface atm 0/0/0 which is releated to a card HWIC-2SHDSL . The router I have is a 1941. I dont know what to do. [code]
View 8 Replies View RelatedI've run into an interesting problem.
-ASA: 8.4(2)
-ASDM: 6.4(5)
When I make a change at the CLI, syslog message ASA-5-111008 is generated and sent to the syslog servers, local buffer, and ASDM.When I make a change in ASDM, syslog message ASA-5-111008 is generated and sent to the local buffer and ASDM. It is NOT sent to the syslog server.
I am running a Netgear wireless N-300 router from my RoadRunner modem. I installed the network early last week to no problems. A few days ago the wireless devices wouldn't connect. They recognize the network, but will not connect to the internet. I have given them their own IPs with the router, and shut off DHCP...this didn't work. I've obviously tried to power cycle the router and modem....this didn't work. I can't seem to find a fix. My android devices connect to the network just fine, but otherwise if it isn't connected via wire, it won't work. I've also tried to connect things without the android devices connected just in case it was interference, and that didn't work.
View 2 Replies View RelatedMy lan ip is 192.168.1.10 an wireless is automatic plssend me the settings to get both together
View 1 Replies View Relatedi just hooked up a dlink router at home so i can use my laptop in different rooms. i have a desktop in one room and the internet works fine but when i hooked up the wireless router i can connect to the network but it says no internet access so i cannot get online my brother in law is really good with computers and i called him and tryed doing a bunch of different things like changing the web address and such but nothing will work.
View 4 Replies View RelatedThe problem is I can't connect to my router, It says "unable to connect to wireless network" . Been trying to 5 days now to fix this, Not getting anywhere.Laptop is, HP Pavilion g6 Notebook, My network wireless adaptor is realtek rtl8188ce 802.11b/g/n.
OS Version: Microsoft Windows 7 Home Premium , Service Pack 1, 64 bit
Processor: Pentium(R) CPU B950 @ 2.10GHz
RAM: 4.00GB
Graphics Card: Mobile Intel(R) HD Graphics Family
I have a home ADSL2 Modem Router. I have 3 computers connected to this wireless network and also with Internet access. However, I have 1 notebook connected to the wireless network but saying No Internet access.
View 13 Replies View Relatedive recently bought a tcl internet enabled tv. I have tried connecting it to the wireless network and it keeps giving me an error that the "connection failed due to timeout".
View 5 Replies View RelatedI have two separate wireless networks in my house, one of them is for sharing my NAS data and the other is for Internet.problem is when I connect to the NAS network and after that I change my network to the other network, I can not connect to the internet ( I can connect to the wireless).
Just after restarting I can see the Internet
I have a Linksys E1200 wireless router and I am having problems connecting to the internet. I can connect when plugged in to the cable modem directly. I can connect to the wireless network, but there is no internet connection. I ran ipconfig release and renew. I think it may be a DNS problem, but I'm not sure.
View 7 Replies View RelatedI have forgotten my network security key to connect to wireless internet.
View 2 Replies View RelatedSince i installed windows 7 on my Samsung R530 notebook i am unable to connect to internet through built in network adopter. while on diagnos it appears that network adopter is not found or may be the driver not been installed?
View 1 Replies View RelatedI tried my entire afternoon trying to figure this out but to no avail. Fortunately, I found this place out of my desperation for a solution. My netbook works very well in my home network but when I brought it to my workplace, I was unable to connect to the internet eventhough I could connect to the wireless network. Other computers and laptops were able to connect and use the internet well using the same router. I tried manually configuring my IP and default gateway based on what I read but nothing worked.
Tech Support Guy System Info Utility version 1.0.0.2
OS Version: Microsoft Windows XP Home Edition, Service Pack 3, 32 bit
Processor: Intel(R) Atom(TM) CPU N270 @ 1.60GHz, x86 Family 6 Model 28 Stepping 2
Processor Count: 2
RAM: 1011 Mb
Graphics Card: Mobile Intel(R) 945 Express Chipset Family, 224 Mb
Hard Drives: C: Total - 109474 MB, Free - 7145 MB;
Motherboard: Acer,
Antivirus: Avira AntiVir PersonalEdition, Updated: No, On-Demand Scanner: Enabled
[code] Started laptop and couldn't connect to wireless network, which used to work. I tried "netsh..reset.log" , "netsh.." , Repairing the network connection but still not working.
View 8 Replies View RelatedMy roommate has a HP pavilion that she has been trying to connect to our internet, and while it seems to be connecting to the network, it wont connect to the internet.Its running Vista, and I tried all the repairs that it prompted me to try, but could not resolve the issue.I know it isn't a internet problem, because the desktop is hardwired and we have two xbox's that connect wireless with no problems.Im not sure what info I should have included in this thread, but its my first post and wasn't sure what I needed to put.
View 12 Replies View RelatedI'm having trouble connecting my 360 to the wireless router to gain Internet access.I use my phone's Wi-Fi to gain internet access with NO issues. My current setup: NetGear Wireless router is connected to my D-Link wired router, and I can access the internet no problem. (10 MBPS down, 5MBPS up)When I try to connect the 360 to the Netgear Wireless router, it connects to the Network, but Internet test it reads "DNS error - The router or modem may mot be automatically providing DNS settings. Try a manual DNS setting instead."(Next suggestion) "DNS Error - If you have a PC that can successfully browse the web, check it's network properties to find the DNS address it uses..."Now, I have XBMC running on my computer, and the 360 can access the network so it shows up under Video Apps so I can see a file list to stream movies. When I try to run a movie, it says I must download an update - so I can't watch the movies at all.I juso set it up so I can access the Network AND Internet.Again, Netgear wireless router (which 360 connects to) connected to D-Link wired router.
View 10 Replies View RelatedI just set up a new router/modem from Centurylink (C1000A) and am having a problem connecting wirelessly to the internet on my laptop. I have a Dell 1390 Mini-card. The laptop shows that I have excellent wireless connectivity. Is there a setting that I need to change to get my internet to stay connected?
View 8 Replies View Relatedi have made a topology in packet tracer related to etherchannel configuration.i am using 2 3560 switches and 1 2950 switch. Now what i want is to bundle up the redundant links between these 3 switches. The links fa0/1-3 between 2950_1 and 3560_1 switches have been bundled up but when i try to bundle the links fa0/4-6 of 3560_1 to fa0/4-6 of 3560_2 it wont work. i am using channel-group 1 mode desirable between the 3560 switches. secondly if i want to assign ip to port channels then it has to be of same subnet between 2 3560 switches right and it must be same between 2950_1 and 3560_1. But these 2 subnets should be different from one another.
View 3 Replies View RelatedI have run into a very strange problem while doing pre-deployment vPC/STP testing in the lab with a pair of Nexus 7000s.
The basic configuration is as follows:
2x Nexus 7000 VDCs (ver 6.0(4)) are configured as vPC peers and connected with a vPC peer-link (redundant on different 10G blades) and a vPC peer-keepalive link. The switches also act as HSRP and EIGRP routers. The N7K-A switch is nominally configured as STP root and HSRP prime for all VLANs, N7K-B switch is STP backup root and HSRP secondary. STP version is PV-RSTP+. As it stands now STP root and vPC prime are on different switches, STP root is on N7K-A and vPC prime is on N7K-B.
3x Layer-2 access switches (3750-1, 3750-2, 3560-1) are configured as access switches and connected to the Nexus 7Ks with a 1G uplinks in V-pattern.
3750-1 and 3560-1 are configured for vPC as Port-Channel10 and Port-Channel12 respectively. 3750-2 is configured for STP. Vlan 35 is shared between all three switches and is enabled on the vPC peer-link (overlapping vPC and STP domains). The downlink port to the STP-only 3750-2 on N7Ks is configured as "vpc orphan suspend".
Everything seems to work fine and pings on VLAN 35 between access switches (that have mgmt interfaces in VLAN35) recover rapidly after failures. However, if I break the vpc peer-link the ping between the two vPC switches 3750-1 and 3560-1 stops. Moreover, this appears to be sporadic in nature with some vpc peer-link failure attempts recreating the problem and some not. Sometimes the problem manifests itself when the peer-link is brought back up rather than taken down.
After doing a bit of troubleshooting, I have isolated the problem to MAC address blackholing. Basically when the peer link is taken down, MAC Address table on the vPC primary switch, N7K-B, (I believe during vPC convergence) forces the traffic destined from 3750-1 to 3560-1 through the STP only switch 3750-2, which apparently goes through the RSTP convergence and enables its alternate link to N7K-B before vPC has finished its convergence. After vPC convergence is finished the path through the STP-only access layer switch 3750-2 no longer exists, as vPC will take down all vPC ports and suspend orphan ports on the vPC secondary switch (N7K-A). However the MAC Address table on N7K-B still points through the 3750-2 access layer switch instead of directly through Port-Channel 12 on N7K-B and thus creates a traffic blackhole. Issuing a ping or bouncing SVI interfaces on N7K-B fixes the problem.
i have my E1000 network detected by laptop and devices but can't connect to Internet. The E1000 is connected to Cisco 2100 modem and I can connect to Internet if I plug my laptop/PC directly to Cisco 2100 modem.
View 2 Replies View RelatedI am having problems connecting to the internet. I've tried changing my security from WPA to WEP and back again. I've searched these forums for a solution and nothing has worked. I've changed my antenna output to Aux from Auto as one thread suggested, but no luck.
For a time, I could connect to my wireless BT Home Hub 2, but the range was pathetic (about 4 metres). I've tried connecting to my partners home wireless connection, and again, same problem. Now the connection is virtually nothing. If I am lucky enough to get a connection then it will be poor and usually fail within 2 minutes.
I've had my Dell Inspiron Mini 10v for nearly 3 months now. I wish I was brave enough to return it when I had the chance.People have commented that this could be a known issue. I don't know what the problem is. I've spoken to IT bods my office and nobody seems to know.
Namely an Unidentified Network with no NETWORK access. Some information first, the NIC that Im using is the Realtek PCIe Family Controller, Ive updated the drivers, Ive uninstalled, Ive reinstalled. Ive basically been on the internet for the past two days trying all the solutions. Including refreshing and renewing my ip, trying a static ip (although, Im still not sure if I did this step correctly) Ive tried disabling IPV6, Ive tried adjusting my speedflux. The problem is also intermittent with seemingly no reason whatsoever, some days Ill go without internet for the entire day, then the next day Ill boot up my computer and Ill have internet again. It should be noted that when I enable WIRELESS on my laptop, Im able to connect to the network, but when I enable wired, I am not able to.
Here is the ipconfig /all for when Im connected wirelessly and have a connection.
Microsoft Windows [Version 6.1.7601]
Copyright (c) 2009 Microsoft Corporation. All rights reserved.
C:Windowssystem32>ipconfig /all
[Code]....
It should be noted that I am using powerline adapters for my connection, but as I said, this problem only recently started cropping up. I went fine for almost a week with no problems, then all of a sudden it started happening. Im still able to connect wirelessly so its not too much of an issue, but I prefer via Ethernet..
Recently I've been having some internet problems. Namely an Unidentified Network with no NETWORK access.the NIC that I'm using is the Realtek PCIe Family Controller, I've updated the drivers, I've uninstalled, I've reinstalled. I've basically been on the internet for the past two days trying all the solutions. Including refreshing and renewing my ip, trying a static ip (although, I'm still not sure if I did this step correctly) I've tried disabling IPV6, I've tried adjusting my speedflux, believe me I've tried just about everything, I don't have one blue link left when it comes to my google searches on fixing this problem.The problem is also intermittent with seemingly no reason whatsoever, some days Ill go without internet for the entire day, then the next day I'll boot up my computer and I'll have internet again. It should be noted that when I enable WIRELESS on my laptop, I'm able to connect to the network, but when I enable wired, I am not able to.[code] I'm still able to connect wirelessly so its not too much of an issue, but I prefer via Ethernet.
View 2 Replies View RelatedWe have an ASA with 8.4(5) version. we had detected that few ip's were getting shunned ,to overcome the problem no shun was used and the traffic normalised.But, the same problem re-occured a few days after that with logs showing traffic being shunned.
is there any fixed way to get rid of this. what commands can i use to verify related configuration on the firewall.
I have two control point, two firewall the second one is linked inside one DMZ from the first firewall route is good and inside the DMZ from first firewall I have servers too.so to be more clear we could call as IP for the DMZ from first firewall, Interface IP 1.1.1.1 that generate this DMZ with first firewall (netmask 255.255.0.0)
inside the DMZ I have an interface from second firewall with IP 1.1.1.5 and inside DMZ 1.1/16 I have servers too keep one test server with IP 1.1.1.3.The LAN passing the second firewall is 2.2.2.1 ever 16 bits of netmask (255.255.0.0) inside the DMZ generated from second firewall I have a machine with IP 2.2.2.9 that need to access in TCP services on machine 1.1.1.3
TCP packets from 2.2.2.9 pass the second firewall and arrive inside DMZ with net 1.1/16 and arrive to server with IP 1.1.1.3 defaul gateway (to answer to originating machine with IP 2.2.2.9) is 1.1.1.1 ASA interface 1.1.1.1 claim a missing related as it haven't mapped the connection that has passed on first firewall. I need only that 1.1.1.1 route packets to second firewall (who own net 2.2/16) avoiding to be trappen in missing related check
at start it was working! around 1 year ago we upgraded IOS to 8.4 and ever so late (one year) doing maintenance to a machine I discovered it was no longer talking with these server on net 1.1/16
I have found on cisco docs chapter 51 and TCP State Bypass before was working, is something that has changed inside ASA IOS 8.4 ?
I am becoming very irritated with my laptop. I would like to know why I can only connect to the network Linskeys, and it'll have this little yellow thing, and it'll say its connected but once i click and internet thing (like google chrome) it will say I am not connected.
View 4 Replies View Related