I have been experiencing drops in my wired internet connection and a google search brought me to your forums.It seems to disconnect more often either during a call on my voip phone (a snom) or shortly after - as if a surge of usage makes it drop out?
[code]...
I am running Windows 7, Time Warner Cable is my ISP, I am using a Netgear wireless router, and a netgear wireless card to access the signal
The problem started a week ago. While playing online video games (Battlefield 2), I will get a message on my screen telling me theres a problem with my connection. Sometimes it will only freeze up for 5-7 seconds, and sometimes it is up long enough to make me lose connection to the server.I am not having ping problems, the server is not kicking me for that.All background programs are closed, ive tried restarting everything I have thats related to internet and my computer.
My VPN connection is dropping every few minutes for a few seconds at a time over VPN on the E3000. It wreaks havoc with the applications that require a constant connection.
View 3 Replies View Related2 brand new routers (BEFSR41 v4.3) Firmware - 2.00.4 Build 8, 10-19-2010 - both same problems:Frequent Internet drops, daily resets required.I'm 99.9% sure there's either a defect in this model, or a serious screwup in this firmware.My router uses an IP address, with DHCP off. Also, we have cable modem. Plugging in directly to cable modem works fine.I am an experienced network admin, so refrain from the usual reset / try again response. Have there been many issues with this model and / or firmware? Have there been many returns?
View 2 Replies View RelatedRecently at my company we have started using Polycom i335 IP Phones from 8x8 inc, the thing is that while trying to use it directly through a switch it does not register with the server and I get a "url call is disabled" msg on the LCD of the Polycom. On that same switch I am using an Aastra 6755i IP phone, it is working absolutely fine, although it is using the same technology and ports.Now if I connect my laptop via wireless or if I connect a PC through wire and use ICS to share the internet and connect the Polycom to the shared Ethernet port, the Polycom works fine! On the same network Vonage works fine as well. but this Polycom only and only works via ICS?
View 1 Replies View RelatedAny VoIP box which has from 3 to 10 phone ports?I'm sourcing the box for a business that wants to connect about 8 phones to the box, then have the calls terminated on our partitioned platform hosted by a third party.
View 3 Replies View RelatedMy cable provider has installed a separate RCA DHG536 modem for my VoIP phone service alongside my SB5120 modem, and charges me $7 a month modem rental. I am upgrading the SB5120 to a DOC 3.0 modem and wonder if I can abandon the DHG536 modem?
View 2 Replies View RelatedI have a VOIP WiFi phone (MIC505W) I have configure it according to the user manual.I get access to WiFi, but when I dial a number I get busy signal with the message "disconnet".
View 3 Replies View RelatedIs it possible to connect an analog phone to an FXS port on a CME router and a VoIP phone to a switch connected to said router and have voice connectivity between the phones? Also, is it possible to connect an FXO port on that same CME to a RJ-11 wall jack to connect to the PSTN and be able to call that VoIP phone as well as the analog phone from my cellphone? I'm trying to tie as I read the CCNA Voice OCG.
View 5 Replies View RelatedI have recently been experiencing a problem. This started to occur after I had gotten new internet service and a new router. I now have comcast, and a new NetGear router. I also have a VOIP phone connected to the router call "AllVoi". Now, whenever I use this phone, all connections on WiFi go down as I am using it. While, when I am using any ethernet connections dirctly from the router, it works fine. It becomes a large problem when you are watching a video or something from a laptop WiFi connection.
View 2 Replies View RelatedI have a 887 setup as a EasyVPN server, and a 861 as an EasyVPN remote - network extension mode with split tunnelling.This works fine - I can ping and connect to machines across the tunnel.However if I setup a VOIP handset to connect across the tunnel it registers and calls work, but drop after 30secs....I know this is normally a firewall or nat problem, are easyvpns firewalled or natted?
View 9 Replies View RelatedI have the router for over two years, Present Firmware is V2.0.1.3, I have Polycom phone connected to the router using 8 x 8 VOIP service. The phone was working fine untill yesterday. 8 x 8 tech support suggested getting a different router. I have the same router at home and tried the same phone on my home router - it worked. So, the problem is not the phone but int he router. I tried to call Cisco tech support but found out that the warranty support expired and I need to buy a support plan. Called to buy the support, and gave up after an hours on hold. Left message.
View 1 Replies View RelatedA broadband cable modem is connected to the input of a new BEFSR41 4-port router. The router feeds 4 computers (a newer "primary" PC, and 3 secondary "old goats" that I use to print online grocery coupons). The 4 PC's are networked to share a common printer, a single directory on the "primary" PC, and using a 4-port KVM switch - I switch a single keyboard and mouse to whichever PC that I am using at the time.
View 1 Replies View RelatedWe've been configuring our swtichports as follows for our 7945 and 6941 type VoIP Phones, but are having problems witht the 6901.
VLANS
Vlan 900 is a VoIP VLAN
Vlan 999 is a NULL VLAN and is shut down:
interface g0/1
switchport access vlan 999 {VLAN to direct data traffic to the bit bucket becuase a PC shouldn't be connected to this port}
switchport mode access
switchport voice vlan 900
mls qos trust cos
spanning-tree portfast
The 6901 phone doesn't support multiple VLANs, so our configuration above does not work unless vlan 999 is turned on (not good security wise). We got the phones to work also by removing vlan 999 and switchport mode access.
switchport voice vlan 900
mls qos trust cos
spanning-tree portfast
solution that provides the discarding of data for the access VLAN, while supporting the VoIP vlan for this phone?
im having this strange issue where everytime i plug in a voip phone to my 3550 the switch disconnects another voip phone.then to fix the disconnected phone (7940) i need to power off the phone 5-10 minutes then power it on again.
but the strange thing is, once i have to do that to fix the phone and connect the phone back to the switch, the port link is up, but no macs are seen on that port.
We have 2mbps leased line and have Cisco 1841 which is managed by our ISP. I have hooked up another 1841 (please find basic config below, it will get more complex lateron) Now when I connect my laptop I am able to browse Internet. But when I conect VOIP phone, it is not able to contact it's Hosted Server on Internet.
VOIP phone is Polycom SoundPoint 550 and I get URL call disabed message. If I try netgear Firewall everything seems to work.that the voip provider needs following ports UDP Range 16384 - 32766, TCP 5060 & UDP 5060. But in my config all outbound traffic is allowed. [code]
How to set up RVS4000 QOS settings to work with a VOIP phone system? I need to get the QOS active on the VPN so that a remote office with VOIP phones can reach the PBX at the main office over the Internet connection.
View 1 Replies View RelatedI have a WLC5508 and 25 LAP 1041. I use two wifi, one with RADIUS for data and other with wpa-psk for voip. The problem is the voip conectivity is broken.How can i improve the handover?
View 11 Replies View RelatedI've got a problem with my phone line which is preventing me from connecting to the internet.In my house we have a phone line (Provided by Telstra) and Internet (provided by TPG)Recently at 7 at night all of a sudden our internet dropped out. I did some checking around and look at my modem and the DSL light refuses to light up.I disconnect the phone and modem separator and plug the modem in directly to the phone line. Still no DSL connection.When i connect the phone directly to the phone line (and when it goes through the seperator) it still works, but i hear strong grainy static through the phone.
View 1 Replies View Relatedi have a wlse setup in a small orgnization and have c1130 aps connected to lan netwrok and with two broadcast ssids,and i have cisco ip telephoy setup too, now i want to connect some of cisco wireless phone to connect through the wireless,as i said that i have two ssids and both are working very fine,so my question is that on lan switch side i have configuration:interface GigabitEthernet1/0/9 switchport trunk native vlan 54 switchport trunk allowed vlan 51,54,58,59 switchport mode trunk spanning-tree portfast.
View 2 Replies View RelatedFor a long time now whenever my home phone is answered my internet connection drops, it happened on my lenovo z575 laptop and i recently built a pc and now use a netgear n-300 wireless adapter and it still happens. I have BT infinity fibre optic broadband and previously had aol broadband and the problem happened with both providers. I was told by bt that it was the wireless adapter in my laptop that was not compatible with the router but that was clearly not correct. The internet drops when the phone is answered and sometimes when it is put back in the holder and sometimes just when it is rung.
View 12 Replies View RelatedI have an Orange Livebox connected wirelessly to my laptop. Everything's been working fine until the last few weeks. Whenever I receive or make a call using my iDECT s2i cordless telephone the internet drops and it takes ages to reconnect. I've checked all the connections and every phone socket has an ADSL filter. I understand that some wireless devices can affect a router and that these are usually 2.4ghz devices but I have no idea if my cordless telephones are 2.4ghz or 5.8ghz or indeed if this is the source of the problem at all.
View 2 Replies View RelatedI can install things, run CCleaner, and do other basic tasks. I've been stumped about this issue for months and after repeated, and failed, attempts to resolve it via the ISP. I've done searches via Google, this website, and all the other places I can think of, so hopefully I didn't miss a solution to my problem. When playing games online, my internet connection will occasionally drop for 5-8 seconds, every 5-10 minutes. Sometimes, the game will allow me to reconnect after a short lag spike. Other times, I must meet a breakpoint for getting booted, and I'll have to leave the game.
View 12 Replies View Relatedafter a certain period of time (ranging from 2 minutes to several hours) the unit keeps dropping the WAN connection, making the unit unaccessible from the WAN side. The strange thing is, that when the connection is dropped, the unit is perfectly accessible from the LAN side, the WAN LED is still on, status info shows the WAN link up, and packet trace shows broadcasted traffic on the WAN interface, so only the directed communication to and from the ISPs gateway (configured to fix IP) seems to be blocked for some reason. When this happens, then plugging the WAN cable to the Optional WAN port enables traffic again, but it is also dropped after some time, and then only power cycling the unit restores WAN connectivity.
View 0 Replies View RelatedWe have an RVS4000 router at two ends of a VPN tunnel. The VPN tunnel is working fine, however a phone at the remote site drops calls, even though they sound clear and unblemished. I have set highest priority on the port the phone is hooked up to at the remote site, and have set a priority for upload traffic on both routers, but the phone stills drops calls after 2 to 3 minutes.
View 3 Replies View RelatedThis computer is brand new Dell Inspiron 15R. The WIFI is dropping out repeatedly. I connect for ~10 minutes, but then the connection gets a yellow exclamation point for limited connectivity, and I can't reconnect until rebooting the router. I read the sticky but there wasn't a post for the 2230 network card.
The problem happened on windows 7 and now on windows 8. Rebooting the computer doesn't work. I tried the POWER SAVE trick and it didn't work. I tried the maximum roaming trick, and that didn't work either. The network card is the Centrino Wireless-N 2230 with the 15.5.6.48 drivers.
I can connect to the Verizon Wireless router or tether off my DROID X2 for about ten minutes, sometimes for longer, but either way, the connection is dropped, and I can't reconnect until rebooting the router.
Quick Specs:- Windows 7 64 bit Home Premium
- Wireless Card: Intel Centrino Wireless N 2230
Issue: Whenever I close my lid, my wireless connectivity drops by around 80+%. When using speedtest.net, I normarlly download at 5 megabits/s and upload at 1, but with my lid closed, I download at less then 0.4 and upload surprisingly at 0.8. My downloads and torrents basically grind to a halt, multiplayer gaming becomes difficult and websites/youtube/videos take much longer to load. I can check all these figures as I'm using an external monitor.I have tried a lot of things to improve connectivity including setting everything to high performance, disabling power saving modes, setting roaming to aggressive/high and updating drivers.
I can't connect to facebook on any browser on this laptop. I can access it from my iphone and from my friends' laptops, but this one isn't letting me get to the page at all. It just turns up with "this webpage is not available" (same with firefox and ie) when i try to go to facebook. I tried running Malwarebytes and Mcafee, but neither of those found any problems. I can't connect to accounts associated with my facebook account either, like Wanelo or Elfster, and I can't connect to downloaded programs that I logged into with my facebook account such as Oovoo and facebook chat. The only thing I can connect to on this laptop is m.facebook.com, the mobile site.
View 1 Replies View RelatedI have a linksys wireless router and today I attempted to attach a epson wirellesss printer to the network. I used ssid and passwords I thought were correct and did not gain access. I want to know how I can retrieve the correct info. The data I used was from the initial setup of the router. I did have to swap it out during the warranty period and now have a replacement router.
View 1 Replies View RelatedThe only thing that will connect to my wireless network is internet explorer. I have tried Firefox and other programs I have that require internet and they will not connect.
View 1 Replies View RelatedI have been in charge of CW and now LMS 4.1. Since I am not a system engineer in profession, it has always been difficult for me to understand how to keep databases and log files in order and how to troubleshoot system related stuff, without causing any problems.I mean that besides setting jobs (device discovery, netconfig, usertracking, archiving and the like), what else do I need to check on a regularly basis, which jobs can I delete with safety, what kind o log rotation should I configure?For example, I have noticed that the ConfigMgmtServer.log is quite large (1,2 Gbytes).
View 10 Replies View RelatedI have a SG200-50P. It had a problem with the PoE ports (didn't supply power to my Bosch POE security cameras) so I updated it to the latest firmware. Now it does recognize the cemeras and supplies power to them. However, there are a few problems:
1. The boot time is extremely long, maybe 15-20 minutes for it to become ready. I've tried to reset to factory default settings, push the reset button for 30+ seconds, and disconnect all the ports. The boot time was always very long.
2. Even thought it supplies power to the cameras, the PoE lights on the ports are not lit.
3. The log is filled with this error, posted every second.
21474345202013-Apr-12 11:40:23Alert%HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x12e6 dev_num 0 val 0x0) was detected: POE is Disabled untill Reset 21474345212013-Apr-12 11:40:22Alert%HAL_config_poe-A-POEFailDetected: POE ERROR(i2c_read_mem failed addr 0x139c dev_num 0 val 0x0) was detected: POE is Disabled untill Reset
Occasionally it has his error.
I'm having problems to ping through interface atm 0/0/0 which is releated to a card HWIC-2SHDSL . The router I have is a 1941. I dont know what to do. [code]
View 8 Replies View Related