Wireless :: VOIP Phone With LINKSYS Router

Mar 11, 2011

I have a VOIP WiFi phone (MIC505W) I have configure it according to the user manual.I get access to WiFi, but when I dial a number I get busy signal with the message "disconnet".

View 3 Replies


ADVERTISEMENT

Linksys Wired Router :: BEFSR41 Fed From SPA2102 VoIP Phone Adapter

Oct 15, 2011

A broadband cable modem is connected to the input of a new BEFSR41 4-port router.  The router feeds 4 computers (a newer "primary" PC, and 3 secondary "old goats" that I use to print online grocery coupons).  The 4 PC's are networked to share a common printer, a single directory on the "primary" PC, and using a 4-port KVM switch - I switch a single keyboard and mouse to whichever PC that I am using at the time. 

View 1 Replies View Related

Linksys Wired Router :: How To Set Up RVS4000 QOS Settings To Work With VOIP Phone System

Dec 15, 2011

How to set up RVS4000 QOS settings to work with a VOIP phone system?  I need to get the QOS active on the VPN so that a remote office with VOIP phones can reach the PBX at the main office over the Internet connection. 

View 1 Replies View Related

VOIP IP Phone Only Working Through ICS?

Feb 10, 2011

Recently at my company we have started using Polycom i335 IP Phones from 8x8 inc, the thing is that while trying to use it directly through a switch it does not register with the server and I get a "url call is disabled" msg on the LCD of the Polycom. On that same switch I am using an Aastra 6755i IP phone, it is working absolutely fine, although it is using the same technology and ports.Now if I connect my laptop via wireless or if I connect a PC through wire and use ICS to share the internet and connect the Polycom to the shared Ethernet port, the Polycom works fine! On the same network Vonage works fine as well. but this Polycom only and only works via ICS?

View 1 Replies View Related

VoIP Box Which Has From 3 To 10 Phone Ports?

Aug 5, 2011

Any VoIP box which has from 3 to 10 phone ports?I'm sourcing the box for a business that wants to connect about 8 phones to the box, then have the calls terminated on our partitioned platform hosted by a third party.

View 3 Replies View Related

Possible To Run VoIP Phone Through SB6121 Modem

Dec 22, 2012

My cable provider has installed a separate RCA DHG536 modem for my VoIP phone service alongside my SB5120 modem, and charges me $7 a month modem rental. I am upgrading the SB5120 to a DOC 3.0 modem and wonder if I can abandon the DHG536 modem?

View 2 Replies View Related

Cisco :: Calling From Analog To VoIP Phone?

Mar 14, 2013

Is it possible to connect an analog phone to an FXS port on a CME router and a VoIP phone to a switch connected to said router and have voice connectivity between the phones? Also, is it possible to connect an FXO port on that same CME to a RJ-11 wall jack to connect to the PSTN and be able to call that VoIP phone as well as the analog phone from my cellphone? I'm trying to tie as I read the CCNA Voice OCG.

View 5 Replies View Related

Voip Phone Stops Wifi Connections?

Feb 26, 2011

I have recently been experiencing a problem. This started to occur after I had gotten new internet service and a new router. I now have comcast, and a new NetGear router. I also have a VOIP phone connected to the router call "AllVoi". Now, whenever I use this phone, all connections on WiFi go down as I am using it. While, when I am using any ethernet connections dirctly from the router, it works fine. It becomes a large problem when you are watching a video or something from a laptop WiFi connection.

View 2 Replies View Related

Frequent Drops In Connectivity - Seems To Be Related To Voip Phone

Sep 7, 2012

I have been experiencing drops in my wired internet connection and a google search brought me to your forums.It seems to disconnect more often either during a call on my voip phone (a snom) or shortly after - as if a surge of usage makes it drop out?

[code]...

View 5 Replies View Related

Cisco Routers :: WRVS4400N Stopped Working With VOIP Phone

Mar 1, 2013

I have the router for over two years, Present Firmware is V2.0.1.3, I have Polycom phone connected to the router using 8 x 8 VOIP service. The phone was working fine untill yesterday. 8 x 8 tech support suggested getting a different router. I have the same router at home and tried the same phone on my home router - it worked. So, the problem is not the phone but int he router. I tried to call Cisco tech support but found out that the warranty support expired and I need to buy a support plan. Called to buy the support, and gave up after an hours on hold. Left  message.

View 1 Replies View Related

Cisco Switching/Routing :: Configuring Port To 6901 VoIP Phone?

May 2, 2013

We've been configuring our swtichports as follows for our 7945 and 6941 type VoIP Phones, but are having problems witht the 6901.
 
VLANS
Vlan 900 is a VoIP VLAN
Vlan 999 is a NULL VLAN and is shut down:
 interface g0/1
switchport access vlan 999    {VLAN to direct data traffic to the bit bucket becuase a PC shouldn't be connected to this port}
switchport mode access
switchport voice vlan 900
mls qos trust cos
spanning-tree portfast
                 
The 6901 phone doesn't support multiple VLANs, so our configuration above does not work unless vlan 999 is turned on (not good security wise).  We got the phones to work also by removing vlan 999 and switchport mode access.
 
switchport voice vlan 900
mls qos trust cos
spanning-tree portfast
 
solution that provides the discarding of data for the access VLAN, while supporting the VoIP vlan for this phone? 

View 3 Replies View Related

Cisco Switching/Routing :: 3550 - Switch Disconnects Another Voip Phone?

May 14, 2013

im having this strange issue where everytime i plug in a voip phone to my 3550 the switch disconnects another voip phone.then to fix the disconnected phone (7940) i need to power off the phone 5-10 minutes then power it on again.

but the strange thing is, once i have to do that to fix the phone and connect the phone back to the switch, the port link is up, but no macs are seen on that port.

View 1 Replies View Related

Cisco WAN :: 1841 - VOIP Phone Not Able To Contact Hosted Server On Internet

Mar 11, 2010

We have 2mbps leased line and have Cisco 1841 which is managed by our ISP. I have hooked up another 1841 (please find basic config below, it will get more complex lateron) Now when I connect my laptop I am able to browse Internet. But when I conect VOIP phone, it is not able to contact it's Hosted Server on Internet.
 
VOIP phone is Polycom SoundPoint 550 and I get URL call disabed message.  If I try netgear Firewall everything seems to work.that the voip provider needs following ports UDP Range 16384 - 32766, TCP 5060 & UDP 5060. But in my config all outbound traffic is allowed. [code]

View 6 Replies View Related

Linksys Wireless Router :: Why Does E4200v2 Not Detect VOIP ATA

Jan 11, 2013

I have a static IP on the ATA (Linksys PAP-2T) ...the router will only pick it up occasionally...most times it does not.  The ATA is on and working (I can call in/out) but I can't see how the router can't find/see it. I have added the ATA to the DHCP reseve list but still nothing. I have the port fowarded for the ATA but when I go to canyouseeme.org it comes up as "Connection timed out"...becuase I think it can't see the ATA behind the Router.

View 1 Replies View Related

Linksys Wireless Router :: VOIP Does Not Work Via E4200?

Jul 25, 2011

I have a new Polycom Soundpoint IP550 VOIP phone that was not connecting via my old WRT54GS router.  I purchased a new router, the E4200, thinking it was just the age of my original router.  It also will not allow the VOIP traffic through.  I can connect the VOIP phone directly to my CenturyLink modem and it works.  But when I connect it back to the router it stops.  
 
I contacted Cisco support and they had me upgrade the firmware to 1.0.02 build 13  May 24, 2011 version.  Also adjusted down the MTU to 1364. That still did not work so they told me to take the router back to the store.  I have not done that yet as I want to ensure that the router is really broken and not that I am missing a setting.  The tech said that I should be able to plug the VOIP phone into the router and make NO additional changes.

View 1 Replies View Related

Linksys Wireless Router :: Configuring E4200 For VOIP Prioritization

Sep 8, 2011

How do I configure E4200 for VOIP priority. My vonage adapter is connected to the router by Ethernet.Also I want google voice call prioritization.

View 1 Replies View Related

Linksys Wireless Router :: Tmobile WRTU54G-TM Connection To VOIP Service?

Jan 18, 2012

A client is using Tmobile VOIP using the aforementioned WRTU54G-TM 2-line VOIP wireless router with 4-port hub.  What they would like to do is to place this in their network and NOT have it change (route) the network addresses being assigned to devices 'behind' this router so even their wireless devices are all "on the same network" as the wired devices BEFORE this unit,  In essence, preserve the same 'network and subnet mask' that is being issued by their DSL router via it's integrated DHCP server. ... Rather like operating this unit like an 'access point' instead of a router.Under most circumstances, I might try to assign this router a static IP outside the scope of the DHCP range the DSL router would supply, then plug the (gigabit) Ethernet network cable into one of the 4 Ethernet ports on the rear of this router - but apparently this does not 'facilitate' a connection to Tmobile's VOIP service.When attempting to do this, the connected telephone devices do not get a phone line connection and the status light(s) that normally indicate proper operation do not illuminate.

View 3 Replies View Related

Linksys Wireless Router :: E3000 And Gigaset C410 VoIP Connection

Jan 25, 2012

I have installed the LinkSys E3000 Router, but I am still struggling because the device Gigaset Siemens C410 (that is the VoIP base) does not work.Before the E3000 I had an WRT160Nv2, with this router the Voip Devise works properly. If I link the WRT160Nv2 to the E3000 and the VoIp device to the WRT160Nv2 it works.

View 1 Replies View Related

Linksys Wireless Router :: 4200v1 Set Up With Same Great Quality Voip While Uploading / Downloading

Mar 21, 2013

I use in my network Linksys 4200v1 (newest firmware) and Sipura SPA 3000 ( 3.1.20(GW)firmware) and SPA 122 (1.1.0(011) software version as my phone adapters.My voip phones  are working great until I start to download or upload some files, watching on-line tv.How and where should I set up above routers to have the same great quality voip while uploading and downloading at the same time?

View 4 Replies View Related

Linksys Wireless Router :: WRT54GL Versus Magic Jack VoIP Telephone

Feb 17, 2010

I got my WRT54GL v1.1 yesterday and connected it to my pc [wired] and netbook [wireless]. I thought all was well until I noticed that my Magic Jack VoIP telephone began dropping calls after about 1 minute. My first course of action was to disable SPI firewall in router and reboot. That had no affect on the situation, then I noticed that my send light on my cale modem [ no manufacturer listed on unit] was not blinking as it has done before the router installation. I reverted to my cable modem to pc only set up and my Magic Jack worked just fine. I need to use the router for wireless, so I need to find a solution to this problem. I took a look at my firmware version and saw that it was not current, but I wanted to bring my problem here for a possible solution be for I flashed new firmware.

View 9 Replies View Related

Linksys Wireless Router :: How To Connect EA6500 To Phone Line

Jan 25, 2013

I just bought  an ea6500 to replace my old Billion router and up to now all I've had to do is plug my phone line directly into the "phone line in" port on the back of the billion router. But I see there is no "phone line in" port on the ea6500, I don't use a modem and have used the billion router by itself for the past 6 years, is there a way to connect my phone line directly to the ea6500 somehow? My research so far indicates you can't do it via an 'Ethernet / phone line adaptor' as they are incompatable anyway.
 
The install guide seems to expect a Modem is being used but in my case it hasn't been and I would think a router should perform the basic functions of a modem anyway ?
 
My concern is that if I really need to purchase a modem then won't this potentially 'throttle' the capabilities of the ea6500 which is the reason I've bought it in the first place ?
 
If I do need to purchase a modem to get my ea6500 working then what specs should I be looking for ??

View 4 Replies View Related

Linksys Wireless Router :: WRT120N - Why Won't Phone Or Kindle Connect

Oct 4, 2012

I have the WRT120N.  It seems to work for the computer and for Netflix through the BluRay, but I cannot connect my Kindle, my son's Kindle or either my ormy husband's phones anymore.  They used to work. 
 
Also, the free trial of Network Magic is over and it can no longer be purchased.  Do I really need something like that?

View 3 Replies View Related

Linksys Wireless Router :: WRT54G2 V1 Cannot Connect With Smart Phone

Nov 5, 2011

I recently purchased a smart phone that can use my wireless access to get to the internet, however the phone cannot connect. I have verified that I am using the correct password and it is finding the network just fine, it just can't connect. I have had this problem with my laptops as well, but with them I just copied the key to a USB key and used that to get them going. I don't have that ability with the smart phone. 
 
how to best troubleshoot this issue and resolve it? I have also reset the router to allow anonymous internet access with no positive result there either.

View 1 Replies View Related

Linksys Wireless Router :: WRTU54G-TM - Phone Line Has Been Dropping?

Jan 18, 2012

The last couple of weeks the phone line has been dropping until I unplug for about 30 seconds to reset. It is happening more frequently.  The phone service through TMobile gets a dial tone and rings several times then drops when making a call.

View 9 Replies View Related

Linksys Wireless Router :: EA2700 - Way To Get Phone Line Connection?

Sep 1, 2012

I have century link DSL with a Westell 7500. I bought the EA2700 as a replacement.  I assume its not a dsl since there is no phone line connection.

View 2 Replies View Related

Linksys Wireless Router :: E4200 Support ALG Enabled Phone

Sep 8, 2012

Due to an issue with having to support an ALG enabled phone and a non-ALG enabled phone, I have a requirement that both NAT and RIP be enabled simultaneously, is there a Linksys product that can support this requirement?  Or, more preferably a firware upgrade for the E4200 that will support this?

View 3 Replies View Related

Linksys Wireless Router :: WRT54G 2 Can't Connect With Droid Cell Phone

Sep 2, 2012

When I try to connect to my Motorola Droid 2 cell phone--using my home network--it just cycles between "obtaining IP address" and "remembered.secured with WEP", then back to "obtaining IP address", etc.I have connected in the past with no problem, so it had the password in the phone, but I followed the troubleshooting advice at the Droid 2 site and "forgot" that contact, and reconnected, reinputting the password. Still the same thing.

View 2 Replies View Related

Linksys Wireless Router :: Wrt54gs - Smart Phone Won't Connect To Wifi

Apr 23, 2012

I connected my router to a new computer. The computer is connected to the Internet.My SmartPhone won't connect via the router.
 
I logged in to the router from my cell and entered the password.The cell says the following over and over without connecting: ScanningObtaining IP address from routerDisconnectedConnectingScanning ... over & overHow can I connect my Samsung GAlaxy SII Skyrocket to my WiFi router [WRT54GS]?

View 2 Replies View Related

Linksys Wireless Router :: Cordless Phone Cuts Out Wifi On E2500?

Sep 20, 2011

I have a cordless phone which broadcasts on 2.4ghz - when the phone is being used it cuts out the wifi. I thought that with the E2500 being a dual band - I wouldn't have this issue as I thought the router would switch to the 5 Ghz frequency if there was interference on the lower band. Maybe I am not understanding how the dual band works.

View 3 Replies View Related

Linksys Wireless Router :: WRT120N - QOS Doesn't Accept Phone MAC Address

Jan 23, 2012

My Linksys WRT120N router doesn't accept my cellphone's MAC address... Phone's MAC address is AC:81:F3:08:13:F5 but upon adding the MAC address Internet Access Priority Category based on MAC address, I get an error "Assign MAC address is incorrect".

View 1 Replies View Related

Linksys Wireless Router :: X2000 Not Downloading Applications With Android Phone

Jan 14, 2013

I did an upgrade to my firmware on the x2000 dsl router and now i cannot download apps with my android phone, i have tried everything that i can think of.

View 7 Replies View Related

Linksys Wireless Router :: Wrt160n - Dropping Wifi Connection Since New Phone

Dec 19, 2012

I've got a router in room where my cable modem comes in. In center of house, I have another router, N Ultra Range PLUS, WRT160N.
 
My laptop, which I use in front room near that middle room router and my husband's desktop, also near that middle room have no problems. My desktop which is right next to the main router in back of house (where the cable modem is), has the weakest signal. I guess that's because the WRT160N is further away from it and has two walls to go through. But most of time signal was good - just not as good as the other two computers. And even when signal was Low, it never dropped connection.
 
Recently I got a new smart phone with WIFI. Anytime I have turned on the phone and used it, I often then have to refresh my wireless signal or reboot computer because it loses the connection. I read somewhere on internet that this may be because of the additional device but again, it doesn't effect the other two closer computers.

View 3 Replies View Related

Linksys Wireless Router :: Phone Gets Dead When Connect WRT120N To Modem

Aug 5, 2011

i brought a new wrt120n from the retailer and when i tried to connect the modem and configure, my phone gets dead and i couldnt connect it to the internet.

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved