Cisco WAN :: 1841 - VOIP Phone Not Able To Contact Hosted Server On Internet
Mar 11, 2010
We have 2mbps leased line and have Cisco 1841 which is managed by our ISP. I have hooked up another 1841 (please find basic config below, it will get more complex lateron) Now when I connect my laptop I am able to browse Internet. But when I conect VOIP phone, it is not able to contact it's Hosted Server on Internet.
VOIP phone is Polycom SoundPoint 550 and I get URL call disabed message. If I try netgear Firewall everything seems to work.that the voip provider needs following ports UDP Range 16384 - 32766, TCP 5060 & UDP 5060. But in my config all outbound traffic is allowed. [code]
View 6 Replies
ADVERTISEMENT
Jan 10, 2013
Here's my setup:
- Cisco 1841 connected to the internet on fa0/1
- LAN connected to fa0/0/1 (switch port, connected to Vlan1)
On my LAN I have a web server that houses different websites. Those websites have DNS records that point to my public IP address, located on fa0/1. From the outside I can reach the websites perfectly, but I can't reach them from the inside. So it looks like I can't seem to connect from my local LAN address to the public ip address on the Cisco (who then should NAT it to the correct server)
Here is a snippet from my config:
--NAT--
ip nat inside source static tcp 192.168.0.3 80 interface FastEthernet0/1 80
ip nat inside source route-map Internet interface FastEthernet0/1 overload
--OUTSIDE INTERFACE--
interface FastEthernet0/1
description WAN
ip address dhcp
ip access-group WAN-IN in
[ code]...
--INSIDE INTERFACE--
interface Vlan1
description LAN
ip address 192.168.0.254 255.255.255.0
ip access-group LAN-IN in
[Code]....
View 3 Replies
View Related
Aug 23, 2011
We have Cisco ASA 5505 with ASDM 5.2 We have one Proxy server in our Local Lab and pointed to Hosted service(Simple Signal)issue is, When our proxy server send register to hosted server, ASA change private IP and post with outside IP and src port as 1063 every time.
Here is debug log on real time monitoring.
Aug 24 2011 05:21:19 302015 203.xxx.xxx.226 192.168.1.51 Built outbound UDP connection 3774 for outside:203.xxx.xxx.226/5060 (203.xxx.xxx.226/5060) to inside:192.168.1.51/27014 (99.119.161.107/1142)
Aug 24 2011 05:21:19 607001 203.xxx.xxx.226 Pre- allocate SIP Via UDP secondary channel for inside:192.168.1.51/27014 to outside:203.xxx.xxx.226 from REGISTER message
Aug 24 2011 05:21:19 710005 203.xxx.xxx.226 99.xxx.xxx.107 UDP request discarded from 203.xxx.xxx.226/5060 to outside:99.xxx.xxx.107/1063
Here 99.xxx.xxx.107 is Our ASA Outside IP address 203.xxx.xxx.226 is Hosted server IP address. My ASA config is attached.
View 2 Replies
View Related
Dec 26, 2012
I was using a wrt54g previously, and host my own webserver, including my own DNS server. I used port forwarding to forward the web traffic to that computer. Well my family got me a new EA3500 as my old one would continually stop working.Since changing router when I duplicate the port forwarding setup from old to new, all the web browsing dies. My web server has now been offline for a few days, and I'm frustrated beyond belief now. I know I've seen the previous posts saying to never forward port 53 (DNS), but I'm at a loss why I could with my old router, but it's now the end of the world with this new one.
View 9 Replies
View Related
May 4, 2013
I have a Cisco ASA 5505 in my home office which has a few PCs behind it with a linux web server running some websites. I can access the websites from outside no problem (i.e. on my iPhone using a 3G connection). However, I struggle to access the websites from within the network. The ASA gives me this error: [code]
View 3 Replies
View Related
Feb 10, 2011
Recently at my company we have started using Polycom i335 IP Phones from 8x8 inc, the thing is that while trying to use it directly through a switch it does not register with the server and I get a "url call is disabled" msg on the LCD of the Polycom. On that same switch I am using an Aastra 6755i IP phone, it is working absolutely fine, although it is using the same technology and ports.Now if I connect my laptop via wireless or if I connect a PC through wire and use ICS to share the internet and connect the Polycom to the shared Ethernet port, the Polycom works fine! On the same network Vonage works fine as well. but this Polycom only and only works via ICS?
View 1 Replies
View Related
Aug 5, 2011
Any VoIP box which has from 3 to 10 phone ports?I'm sourcing the box for a business that wants to connect about 8 phones to the box, then have the calls terminated on our partitioned platform hosted by a third party.
View 3 Replies
View Related
Mar 14, 2013
Is it possible to connect an analog phone to an FXS port on a CME router and a VoIP phone to a switch connected to said router and have voice connectivity between the phones? Also, is it possible to connect an FXO port on that same CME to a RJ-11 wall jack to connect to the PSTN and be able to call that VoIP phone as well as the analog phone from my cellphone? I'm trying to tie as I read the CCNA Voice OCG.
View 5 Replies
View Related
Dec 22, 2012
My cable provider has installed a separate RCA DHG536 modem for my VoIP phone service alongside my SB5120 modem, and charges me $7 a month modem rental. I am upgrading the SB5120 to a DOC 3.0 modem and wonder if I can abandon the DHG536 modem?
View 2 Replies
View Related
Mar 11, 2011
I have a VOIP WiFi phone (MIC505W) I have configure it according to the user manual.I get access to WiFi, but when I dial a number I get busy signal with the message "disconnet".
View 3 Replies
View Related
Feb 26, 2011
I have recently been experiencing a problem. This started to occur after I had gotten new internet service and a new router. I now have comcast, and a new NetGear router. I also have a VOIP phone connected to the router call "AllVoi". Now, whenever I use this phone, all connections on WiFi go down as I am using it. While, when I am using any ethernet connections dirctly from the router, it works fine. It becomes a large problem when you are watching a video or something from a laptop WiFi connection.
View 2 Replies
View Related
Mar 1, 2013
I have the router for over two years, Present Firmware is V2.0.1.3, I have Polycom phone connected to the router using 8 x 8 VOIP service. The phone was working fine untill yesterday. 8 x 8 tech support suggested getting a different router. I have the same router at home and tried the same phone on my home router - it worked. So, the problem is not the phone but int he router. I tried to call Cisco tech support but found out that the warranty support expired and I need to buy a support plan. Called to buy the support, and gave up after an hours on hold. Left message.
View 1 Replies
View Related
Sep 7, 2012
I have been experiencing drops in my wired internet connection and a google search brought me to your forums.It seems to disconnect more often either during a call on my voip phone (a snom) or shortly after - as if a surge of usage makes it drop out?
[code]...
View 5 Replies
View Related
Jun 6, 2012
I have a Time Warner modem/router. There are a ton of different devices constantly being connected/disconnected to our router - itouches, computers, smartphones etc.
The problem started with my otherwise super reliable HP g42 (i3) laptop. Nothing would solve the issue other than recovering it back a few days to when the issue wasn't happening. But then it would happen again after a few days. All other devices would connect without issue.
Time warner's technical troubleshooting consists of "unplug the router for 10 seconds and then plug it back in. Did that work?"
So now, my son gets his first computer and I bring it home last night. Also an HP (pavillion -i3). Same deal. At first, it connects fine and dandy. Then after about 2 hours it get the ol' "won't connect - diagnose the problem?" After diagnose, it says "DNS server may not be available.
Here's the thing: Both computers connect immediately and without issue to my smartphone wireless tether.
View 6 Replies
View Related
May 2, 2013
We've been configuring our swtichports as follows for our 7945 and 6941 type VoIP Phones, but are having problems witht the 6901.
VLANS
Vlan 900 is a VoIP VLAN
Vlan 999 is a NULL VLAN and is shut down:
interface g0/1
switchport access vlan 999 {VLAN to direct data traffic to the bit bucket becuase a PC shouldn't be connected to this port}
switchport mode access
switchport voice vlan 900
mls qos trust cos
spanning-tree portfast
The 6901 phone doesn't support multiple VLANs, so our configuration above does not work unless vlan 999 is turned on (not good security wise). We got the phones to work also by removing vlan 999 and switchport mode access.
switchport voice vlan 900
mls qos trust cos
spanning-tree portfast
solution that provides the discarding of data for the access VLAN, while supporting the VoIP vlan for this phone?
View 3 Replies
View Related
May 14, 2013
im having this strange issue where everytime i plug in a voip phone to my 3550 the switch disconnects another voip phone.then to fix the disconnected phone (7940) i need to power off the phone 5-10 minutes then power it on again.
but the strange thing is, once i have to do that to fix the phone and connect the phone back to the switch, the port link is up, but no macs are seen on that port.
View 1 Replies
View Related
Nov 2, 2011
I've been trying (in vain) to connect a USB Wireless device to be able to use it off my wireless network. I have (2) other laptops and (1) other desktop connecting to the router with no issues. For some reason, this old desktop keeps installing an Ethernet device (probably on the MB) and is automatically Configuring the IP address to that instead of the USB wireless device.I've tried uninstalling the Ethernet device but it comes right back after I do a reboot. Even when I disable it, I still can not connect with my Wireless device.
View 14 Replies
View Related
Oct 15, 2011
A broadband cable modem is connected to the input of a new BEFSR41 4-port router. The router feeds 4 computers (a newer "primary" PC, and 3 secondary "old goats" that I use to print online grocery coupons). The 4 PC's are networked to share a common printer, a single directory on the "primary" PC, and using a 4-port KVM switch - I switch a single keyboard and mouse to whichever PC that I am using at the time.
View 1 Replies
View Related
Feb 10, 2012
need to know why I can not connect to the internet after I am done downloading windows Xp on my Desk top. I got an error message from the cmd, saying that computer is unable to contact DHCP server.
View 1 Replies
View Related
Dec 15, 2011
How to set up RVS4000 QOS settings to work with a VOIP phone system? I need to get the QOS active on the VPN so that a remote office with VOIP phones can reach the PBX at the main office over the Internet connection.
View 1 Replies
View Related
Mar 13, 2013
I just moved to Auckland, NZ from the USA to go to school at the university here, and am having a problem connecting to the internet in the university residence hall in which I am living.Wifi is not available in the residence halls, so we need to use an Ethernet cable. When I plug in my computer, the network adapter icon says Identifying for a while then settles on Unidentified Network with no internet access, the IP is 169.x.x.x.When I try to release and renew the IP, it says unable to contact your DHCP server, request has timed out".I've tried multiple Ethernet cables, both brand new.I tried connecting to a port in a friend's room in the same building, and even in a classroom on campus, and both had the same result.Naturally after all that I assumed my NIC somehow died overnight while I traveled here, so I went to a computer repair shop expecting to have some hardware replaced, but we plugged it in there and it worked immediately so they weren't sure what to tell me.
I've gone through pages of old threads at this forum and others like it, trying solutions but having no luck.I've power cycled my computer, obviously I can't power cycle the whole network as it's for 200 people, but the IT people here have tried resetting it for me on their end as best they can. [code]
View 14 Replies
View Related
Jun 18, 2012
I have a Dell 570 Inspiron desktop running win7 home premium w/ a 64 bit OS. I have Frontier dsl with a Westell 327W modem and a netgear router. Two desktops are connected to the internet...one through the modem and the Dell 570 through the router. I also run laptops through the router w/no problem. This morning the dsl went down, and when it came back up, the Dell 570 would not connect. i tried Diagnosing Connection Problems, and I'm told to turn off the modem/router (which I have done a gazillion times).When I look at Network Connections in the Control Panel, It tells me I have an unidentified network and can't connect. I read through some forums earlier, and found that releasing and renewing ipconfig often corrects the problem, and that's when I got the message that 'An error occurred while nenewing. Local Area Connection unable to contact DHCP server.' This set up has worked for the past year and a half. I looked at the network adapter, and it says it's working properly. I changed the cables going to the machines, and they both work on this computer. The only change made to the computer was to install McAfee security center through AOL yesterday, but the set up worked all yesterday and last night.
View 2 Replies
View Related
Aug 30, 2012
Until a couple of days ago I was able to connect to the internet wirelessly on both my laptop as well as my desktop. However, that has changed for the desktop, now I am unable to access the internet on it. It says that it can detect the signal. When I tried to renew the ip it responded with "An error occurred while renewing interface Wireless Network Connection : unable to contact your DHCP server. Request has timed out." [code]
View 5 Replies
View Related
Nov 30, 2012
I have just installed the wireless equipment on my main computer, but unable to pick up the internet on my 2nd computer, how do I do it??
View 1 Replies
View Related
Mar 31, 2013
I randomly lost Internet connection, and since have not been able to Renew an IP address! Other people in my household can connect just fine. I've tried numerous things to get my internet back, but continue to be unsuccessful in doing so.
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:Documents and SettingsMike>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : miker
Primary Dns Suffix . . . . . . . :
[code]....
View 19 Replies
View Related
Oct 15, 2011
I have reinstalled windows 7 on my Toshiba laptop, I have my wireless set to automatically connect, I have excellent signal strength and have another pc connected to wireless router, but my laptop does not capture IP addresses. I tried renew command but got message unabl to contact your DHCP server, request timmed out.
View 1 Replies
View Related
Sep 28, 2011
Running ACS 5.1 appliance, and am seeing slow repsonse on TACACS authentications due to the ACS trying to reach overseas AD servers and failing. Is there any way to configure a /etc/host/ file locally on the ACS in order to force the appliance to use specific AD servers for authentication? As I understand the process currently, the ACS appliance will query the top-level domain and get a list of all the AD servers in DNS. In my case, this would include the AD servers overseas that we do not want to use.
View 1 Replies
View Related
Jul 3, 2011
I've been having problems connecting my laptop to the internet through wireless. When I plug it in with a cable it works fine. I also know my wireless works fine because i have other things attached to it. When I try to connect it says limited or no connectivity, but the signal strength is excellent. I have tried to repair the problem but it then tells me it cannot renew my ip address. I've also tried the ipconfig /release then renew, and thats when it says about my DHCP.
View 1 Replies
View Related
Apr 20, 2011
I have a Gateway 818gm desktop pc and the wifi stopped working after I reformated the hard drive. I can not figure out where the wifi card is in this PC.
View 1 Replies
View Related
Jun 18, 2011
I can connect directly to the router wirelessly without any problems. When I use my powerline adapter I get the 'unable to contact DHCP Server' error. I've tried unencrypting the router with no success. I've also released/ renewed my IP. [code]
View 1 Replies
View Related
Feb 16, 2011
Started this morning woke up checked my phone no wifi hmm weird checked my hp tpuchsmart connected but jo internet access checked my router(netgear wireless N 300) made sure my modem and all wires are connectedNext went to my router ip 192.168.1.1 after reading some forrums i thought maybe if i changed the ip or sum i would have worked i know dumb though.. any way i believe i disabled my dhcp.. and one of the ip ad on the same page to 192.168.1.3 thats when it got worst i tried ipconfig/release saysNo operation can be performed on bluetooth network connection 2 while it has media disconnected.No operation can be performed on local area connection while it has its media disconnected(Its a wireless connection from my touchsmart to my router) I have tried goin back to the routers page but i can no longer find itI have also tried ipconfig/renew but i get this...No operation can be performed on bluetooth network connection 2 while it has its media disconnectdAn error occured while renewing interface wireless network connection : unable to contact your dhcp server. Request has timed out.No opration can be performed on local area connection while it has its media disconnected
View 3 Replies
View Related
Oct 6, 2011
If I loose bookmarks on my Browser, can I contact my ISP for a log to my internet history?
View 7 Replies
View Related
Nov 13, 2011
Will ACL110 allow IP phones communicate with VoIP server. Do I need to add line to allow multicast traffic? [code]
View 0 Replies
View Related
