Linksys Wireless Router :: 4200v1 Set Up With Same Great Quality Voip While Uploading / Downloading

Mar 21, 2013

I use in my network Linksys 4200v1 (newest firmware) and Sipura SPA 3000 ( 3.1.20(GW)firmware) and SPA 122 (1.1.0(011) software version as my phone adapters.My voip phones  are working great until I start to download or upload some files, watching on-line tv.How and where should I set up above routers to have the same great quality voip while uploading and downloading at the same time?

View 4 Replies


ADVERTISEMENT

Linksys Wired Router :: BEFSX41 - Slow Downloading And Uploading On UTorrent

Dec 30, 2011

I have an issue with slow downloading and uploading on u torrent with my wired router linksys BEFSX41. I thought it may be because I didn't set port forwarding on the specific ports the u torrent use.
 
But every time When I try to set new port forwarding rules on my router's control panel its asks me for a password and user. Although I know this password and user it will keep asking me about them without saving the new port forwarding settings.

View 1 Replies View Related

Downloading And Uploading Other Pc Goes Faster

Oct 3, 2012

I have a Dell Latitude D530 - I am only able to,download at a speed of 2.95 while I can upload at nearly 7,My PC that is attached to the same provider will,download at 7.84 and upload at 7.96.

View 7 Replies View Related

Linksys Wireless Router :: E1200 Wi-Fi Connection Works Great But On Desktop Very Slow

Jul 24, 2012

I just set up my new e1200 wireless router. The wireless connection works great but on my desktop (which is plugged in through the ethernet), has a painfully slow connection. Half the time it times out while loading a website!

View 3 Replies View Related

Linksys Wireless Router :: EA4500 Speed Quality And Signal

May 27, 2012

Bought the new EA4500 a couple of days ago and have looked at my wireless connection and see it varies from 72Mbps to 144Mbps.  It has jumped up to 270Mbps a few times, but rarely.  Shouldn't it be 300Mbps most of the time?  My laptop is 4 feet away from the router and the router is on top of a card board box being elevated away from interference.  The prior router was a dlink 855 that went whacky after 3 years.  I believe I was usually at 270 Mbps with that.  What gives?  Do I have a faulty router?  With this new router, I expected the range to be a lot farther and faster too, but it is not in my family room.  2nd floor router, family room is 1st floor about 50 feet away and I get 1Mbps - 5Mbps.    Everything is set to Auto on router and IP6 is disabled on laptop.

View 9 Replies View Related

Linksys E1000 - Wireless Speed Drops To Nothing When Main PC Is Off With Great Signal

Jun 22, 2012

I have a Linksys E1000 running on the latest firmware available from the Cisco website. When my main PC (Windows 7 64Bit SP1) which is connected with a ethernet cable is running the wireless speed is great for all my connected devices. (Android/Apple phones, tablets, family PC, etc). But when I shut down my main PC the wireless speed drops to the point where it can take 3-5 mins for google.com to load up. The wireless connection is still showing as strong, just the speed isn't there anymore. If I were to turn my PC back on, everything will load up almost instantly and be back to normal. I've tried reinstalling the router, resetting it all back to default settings and re configuring it but I've had no luck in solving this.

View 2 Replies View Related

Workgroup Works Great When Hardwired To Router / Doesn't With Wireless

Nov 28, 2012

I have a win7 desktop upstairs with all of my media on it.I also have a winXP laptop that I would like to use as a media center running xbmc connected to my tv downstairs.I have set up a workgroup so my laptop can access the media stored on my desktop and everything works great when they are both hardwired to my router (Linksys E3000).However, as soon as I unplug my laptop from my router and switch to the wireless connection I can no longer ping my desktop or access the shared folder (internet still works fine on the laptop, it just cant see my desktop anymore).If I plug it back in to the router, everything works again.

The exact error message I get when I try to access the shared folder is "\INFINITYMedia is not accessable. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions. [code]

View 14 Replies View Related

Linksys Wireless Router :: WRT610N Firmware Downloading

Nov 24, 2009

Any upload somewhere of this version of wrt610n firmware! I really need it cause I have to downgrade to that one in order to use my 1TB hard drives.

View 6 Replies View Related

Linksys Wireless Router :: Slow Internet Connection For Downloading Using E1500

Sep 29, 2011

I set up the e1500 and everything worked well, my download speed over the wifi was something like 50mps, now its down to .3 mps over the wifi.  When I'm hardwired to the router the speed goes back up and everything is fine.  The only problem is the wifi. Its not the ISP because my roommates aren't having a problem with their wifi at all.  I haven't changed anything on my computer except updated some drivers since I set up the router.  My network card drivers are up to date and so is the router's drivers.  I'm also doing all this about 5 feet away from the router.
 
I have a Dell XPS L502x running win 7 64 bit. 

View 9 Replies View Related

Linksys Wireless Router :: E4200 Wifi Connection Slowing Down When Downloading

Aug 2, 2011

I have the following setup at home:

-E4200 connected via Ethernet cable (100Mbs) to local ISP for internet access
-E4200 connected via Ethernet cable (1Gps) to my desktop PC
-E4200 connected via wireless (5Ghz with WPA2 personal) to my laptop
 
In general, everything works fine, I can download files from internet to my PC close to the maximum speed limit (80-90Mbs), the wireless connection goes up to 300Mbs and it can achieve around 10-14MB/s file transfer between PC and laptop.A lot of the time the wireless connection to my laptop is used for HD content streaming from the desktop PC. It works very well until I start downloading files to my PC with speed greater than 50Mbs, when the wireless connection speed drops very fast to about 500KB/s which results in interruptions on the video streaming. At the same time the router’s web interface reacts much slower than usual, as if the router’s CPU is overloaded.
 
I’ve read this follow up review on Small net builder url...and it’s clear that there are some issues when taking E4200 to the limit, but in my case it’s nowhere near that.

View 4 Replies View Related

Linksys Wireless Router :: X2000 Not Downloading Applications With Android Phone

Jan 14, 2013

I did an upgrade to my firmware on the x2000 dsl router and now i cannot download apps with my android phone, i have tried everything that i can think of.

View 7 Replies View Related

Linksys Wireless Router :: E1000 - Cannot Establish Connection With Max Speed For Downloading

Oct 18, 2011

I'm having an issue with my laptop. Although, from my provider, it should be possible to establish a connection at 25'000 kbit/s (download), max speed is at about 800 kbit/s. I'm only about 20 feet away from where the router is located and I don't use any phones (except for a cell phone). I read on this board, that I might have to change the wireless settings on the router and change the radio band but didn't manage to do so. I'm using Mac osx and a wireless connection. 

View 4 Replies View Related

Linksys Wireless Router :: E4200v1 Unstable When Downloading At Full Speed

Aug 20, 2012

i have a little annoying problem with my E4200. V1 with the latest 04 fw. It seems, that after many hours of downloading at full speed (only one torrent at a time) the speed goes down, and up again, and becoming unstable. My max download speed is 1.5 Mb/s, and it can drop from that, to 50 kb/s, and then up again. and i have no internet access when that happens, but it only last 10-20 seconds and then its back again. Sometimes i get that yellow warning sign on the taskbar which says "No Internet Access" but not always.
 
Seems like its happening after many hours of downloading at full speed. im on the latest firmware, have tried different channels, 20 Mhz only on Channel Width, different names on the 2.4Ghz and 5Ghz channels.. i use the 2.4Ghz channel btw. Otherwise its stable, and i have had no problems while gaming online.

View 7 Replies View Related

Wireless :: VOIP Phone With LINKSYS Router

Mar 11, 2011

I have a VOIP WiFi phone (MIC505W) I have configure it according to the user manual.I get access to WiFi, but when I dial a number I get busy signal with the message "disconnet".

View 3 Replies View Related

Linksys Wireless Router :: E3000 Is Re-flash Simply Downloading And Installing Firmware

Jun 2, 2012

I have the latest firmware, have the settings correct (the UPnP is disabled and whatever)

Model number: E3000
Serial number: CVQ01KC13100
Firmware version: 1.0.04 build 6
Operating system: Windows 7 SP 1
Software version: 1.3.11006.1
Connection type (WAN): PPPoE
 
Went out of town 2 weeks in March, and all through April didn't have any disconnects. Have had this problem since I got it, it gets really bad from time to time (like now).  Thought it was my provider for the longest time, but found out if I connect via wired, no disconnects!  Is re-flash simply downloading and installing firmware?

View 6 Replies View Related

Linksys Wireless Router :: Why Does E4200v2 Not Detect VOIP ATA

Jan 11, 2013

I have a static IP on the ATA (Linksys PAP-2T) ...the router will only pick it up occasionally...most times it does not.  The ATA is on and working (I can call in/out) but I can't see how the router can't find/see it. I have added the ATA to the DHCP reseve list but still nothing. I have the port fowarded for the ATA but when I go to canyouseeme.org it comes up as "Connection timed out"...becuase I think it can't see the ATA behind the Router.

View 1 Replies View Related

Linksys Wireless Router :: VOIP Does Not Work Via E4200?

Jul 25, 2011

I have a new Polycom Soundpoint IP550 VOIP phone that was not connecting via my old WRT54GS router.  I purchased a new router, the E4200, thinking it was just the age of my original router.  It also will not allow the VOIP traffic through.  I can connect the VOIP phone directly to my CenturyLink modem and it works.  But when I connect it back to the router it stops.  
 
I contacted Cisco support and they had me upgrade the firmware to 1.0.02 build 13  May 24, 2011 version.  Also adjusted down the MTU to 1364. That still did not work so they told me to take the router back to the store.  I have not done that yet as I want to ensure that the router is really broken and not that I am missing a setting.  The tech said that I should be able to plug the VOIP phone into the router and make NO additional changes.

View 1 Replies View Related

Linksys Wireless Router :: Configuring E4200 For VOIP Prioritization

Sep 8, 2011

How do I configure E4200 for VOIP priority. My vonage adapter is connected to the router by Ethernet.Also I want google voice call prioritization.

View 1 Replies View Related

Linksys Wireless Router :: Tmobile WRTU54G-TM Connection To VOIP Service?

Jan 18, 2012

A client is using Tmobile VOIP using the aforementioned WRTU54G-TM 2-line VOIP wireless router with 4-port hub.  What they would like to do is to place this in their network and NOT have it change (route) the network addresses being assigned to devices 'behind' this router so even their wireless devices are all "on the same network" as the wired devices BEFORE this unit,  In essence, preserve the same 'network and subnet mask' that is being issued by their DSL router via it's integrated DHCP server. ... Rather like operating this unit like an 'access point' instead of a router.Under most circumstances, I might try to assign this router a static IP outside the scope of the DHCP range the DSL router would supply, then plug the (gigabit) Ethernet network cable into one of the 4 Ethernet ports on the rear of this router - but apparently this does not 'facilitate' a connection to Tmobile's VOIP service.When attempting to do this, the connected telephone devices do not get a phone line connection and the status light(s) that normally indicate proper operation do not illuminate.

View 3 Replies View Related

Linksys Wireless Router :: E3000 And Gigaset C410 VoIP Connection

Jan 25, 2012

I have installed the LinkSys E3000 Router, but I am still struggling because the device Gigaset Siemens C410 (that is the VoIP base) does not work.Before the E3000 I had an WRT160Nv2, with this router the Voip Devise works properly. If I link the WRT160Nv2 to the E3000 and the VoIp device to the WRT160Nv2 it works.

View 1 Replies View Related

Linksys Wireless Router :: WRT54GL Versus Magic Jack VoIP Telephone

Feb 17, 2010

I got my WRT54GL v1.1 yesterday and connected it to my pc [wired] and netbook [wireless]. I thought all was well until I noticed that my Magic Jack VoIP telephone began dropping calls after about 1 minute. My first course of action was to disable SPI firewall in router and reboot. That had no affect on the situation, then I noticed that my send light on my cale modem [ no manufacturer listed on unit] was not blinking as it has done before the router installation. I reverted to my cable modem to pc only set up and my Magic Jack worked just fine. I need to use the router for wireless, so I need to find a solution to this problem. I took a look at my firmware version and saw that it was not current, but I wanted to bring my problem here for a possible solution be for I flashed new firmware.

View 9 Replies View Related

Cisco Linksys E3000 Router / How To Restrict People From Downloading

Jun 29, 2011

i wanna restrict people from downloading havy files in my office.how can i do that on my router .I use cisco linksys E3000 router.

View 2 Replies View Related

Laptop Won't Connect To Wireless Network Although Signal Is Great

Nov 27, 2011

My router was unpluged twice and then when I plugged it in the third time my laptop won't connect the the wireless network. I could see the network with great signal on the connection list, but when I tried connect to it, it said: "Windows was unable to connect to XXX. " (btw my laptop's operating system is Windows 7 Home Premium Service Pack 1 64-bit) so I tried to troubleshoot problems. and here are the detection details:Details about network adapter diagnosis: Network adapter Wireless Network Connection driver information:

Description . . . . . . . . . . : Atheros AR5B97 Wireless Network Adapter
Manufacturer . . . . . . . . . : Atheros Communications Inc.
Provider . . . . . . . . . . . : Atheros Communications Inc.
Version . . . . . . . . . . . : 9.0.0.202

[code]....

View 1 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3420 Disconnects When Uploading

Apr 13, 2013

Region : Australia
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_121123
ISP : BIGPOND

My problem is whenever I upload anything, my modem disconnects. My USB Dongle is a Telstra Ultimate 3G Sierra Wireless AirCard 312U. The problem is not present whenever I connect the dongle directly into the USB port on my LapTop.

View 1 Replies View Related

Linksys Wired Router :: RT341P2 Can't Use Voip Providers

Mar 10, 2012

I buy new Linksys RT341P2 router with Linksys - Firmware Version: 1.30.01. My voice ports are locked, and i can`t use voip providers. How to unlock and what i need to do?

View 1 Replies View Related

Linksys Wired Router :: VOIP Dropping Connection 2-3x Per Day

Feb 13, 2013

I have a strong internet signal with good SNR coming out of my cable modem, then a nice short 3ft cable going to my linksys VOIP router (I think it's a SPA 2102). Whether I have anything downstream plugged in or not, the "phone" light on the VOIP router goes off every once in a while and when I check I find that I've lost both dial tone and Internet - basically everything downstream of the VOIP router. Have tried every variation on configuration you can imagine (feeding just one phone, feeding the entire phone wiring to the house, nothing at all plugged into the phone jack, no computers downstream plugged in, replaced all the cables, ...). I've replaced BOTH the cable modem and the linksys VOIP router and the problem continues. My cable company says my signal is fine. They suggested a signal amplifier but the coax comes straight to the modem, no splitter, and I'm always seeing 6-7dBmV. My phone company says their router must be losing signal upstream and refusing to reconnect, especially now that we've tried replacing their VOIP router with no change. Any chance I got two 'bad' routers in a row? Not sure what they did for setup parameters. I'm not particularly tech-savvy but have read a lot since seeing these issues, have run my own ping and tracert checks and everything seems to be wonderful... but then most of the time everything IS fine. When I have phone it's crystal clear and when I have internet it's nice and fast. I sometimes go 24hrs or so without a drop, but other times I'm resetting 2-3x in a couple of hours. All I do is power off the VOIP router and back on and everything is fine, for a while. After first getting VOIP things were fine for 4-6 weeks.

View 1 Replies View Related

Ubuntu 10.04 - Wireless Connection Works Great But Wired Is Totally Dead

Mar 18, 2012

I am running Ubuntu 10.04 on my Acer Aspire One netbook.The wireless connection works great, but the wired is totally dead.

When I plug the Ethernet wire, the little led next to the port doesn't blink.

If I do ifconfig, this is the output:

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:1659 errors:0 dropped:0 overruns:0 frame:0
TX packets:1659 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0

[code]....

There is no eth0. Is that normal?

In the "Network Connections" GUI there is an entry "Wired connection 1", its "MAC address" field is blank.

How can I make the wired connection work?

View 2 Replies View Related

Linksys Wired Router :: RVS 4000 - Voip PBX Server Is Dropping Calls

Jul 8, 2008

I recently purchased a rvs 4000 wired linksys router for my business.  Everything works great with the exception of my VOIP PBX server.  I can receive a call and make a call one at a time.  If a second line rings in and is picked up the first call and the second go dead air.  I am sure that it is a security setting somewhere that I just can't seem to figure out.  I sure would like to get some direction on this.

View 2 Replies View Related

Linksys Wired Router :: BEFSR41 Fed From SPA2102 VoIP Phone Adapter

Oct 15, 2011

A broadband cable modem is connected to the input of a new BEFSR41 4-port router.  The router feeds 4 computers (a newer "primary" PC, and 3 secondary "old goats" that I use to print online grocery coupons).  The 4 PC's are networked to share a common printer, a single directory on the "primary" PC, and using a 4-port KVM switch - I switch a single keyboard and mouse to whichever PC that I am using at the time. 

View 1 Replies View Related

Linksys Wired Router :: How To Set Up RVS4000 QOS Settings To Work With VOIP Phone System

Dec 15, 2011

How to set up RVS4000 QOS settings to work with a VOIP phone system?  I need to get the QOS active on the VPN so that a remote office with VOIP phones can reach the PBX at the main office over the Internet connection. 

View 1 Replies View Related

Getting 50% Downloading Speed When Connected Through Wireless Router?

Sep 30, 2012

I am getting 50% downloading speed when I connect through wireless router (Tp-link wr740N) but the browsing speed is ok and speedtest,net also giving good result only download speed is slow. When I connect directly from modem, I get 100% speed but when I connect wirelessly through router I get 50% downloading speed.

View 3 Replies View Related

D-Link DIR-615 :: Getting Low Wireless Signal Quality?

Jan 19, 2012

I took my router with me to visit family at Christmas.  It wouldn't allow the wired computer through the switch, but yet I could talk to the router with my laptop.  Rather than reconfigure, I bundled up my router & laptop and let well enough alone.Now that they're all back at my house, I can't reliably get the laptop to connect - Low Wireless Signal error.  I've reset the modem & router repeatedly.  Tried Channels 1,6, 11 and 8&9 too.  n only, as that's my laptop's.  On 2 occasions it has connected, rebooted and auto connected and run for 4-5 hours.  Then it's gone.  I've beat this mess for 3-8 hours per day, for days...!!!Laptop(Vista) connects to every other wifi I've tried.  It's sitting 4 ft from the router. 

misc. info.
separate dsl modem, Centurytel, Netopia Cayman 3300 series
no other devices beyond wired desktop and laptop
no changes in other neighboring networks

View 9 Replies View Related

Linksys PAP-2T Voip Adapter / Connect 2-3 Devices To An Existing Wireless Network

Aug 18, 2012

I need to connect a pc desktop and A linksys PAP-2T voip adapter to an existing wireless network(home network).

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved