I tried changing my ip address using ipconfig / release. I tried to fix what I did using ipconfig /renew but it tells me no operations can be performed on local connection 5 while it's media is connected.
View 12 RepliesI am trying to configure a router with a satellite connection. I am following a HughesNet guidline. At step four after typing in the required IP address , nothing happens.There is no place to type user name and password.
View 2 Replies View RelatedHow to change ip address in windows 7?
View 1 Replies View RelatedI am connected to a static ip network. This network sets local ips to connected computers but general ip is the same: static ip of network. When i go to "whatismyipaddress", I can see this static ip. I want to change my ip address. I have no chance to use proxy server or router connection. Is there a way to change my ip address? (Because some sites ban ip address, ex:rapidshare etc. and I need to change my ip)
View 1 Replies View RelatedI found this good guide how to do it, but some things remain unexplained to meI would like to get more information about step:3. Change the IP address of your current PCMaybe more questions will follow, but that's the only problem I am having right now.
View 11 Replies View RelatedI've had the same IP address for years and want to change it to a new one - I have a dynamic IP but for some reason it will never change.It looks as if it's always static-what settings I need to change on Windows 7 to get it to roll over onto a new IP address?
View 1 Replies View RelatedTrying to change my IP address in windows 7. I downloaded Desktop Central 7.Server and Desktop Management Software: Now what am I suppose to do?
View 2 Replies View RelatedI need to change the IP address of existing primary cisco ACS 4.2 (windows based). What is the required procedure to change the IP address?
View 4 Replies View RelatedHow can I change my ip address on windows 7. Someone hacked my computer before and now im afraid that he will do it again. I want to secure it by changing my ip address..
View 2 Replies View RelatedMy Network is running Windows Server 2003 and with more than 150 Users. But last week, I notice that a program is changing my DHCP server IP Address scope.
View 2 Replies View Relatedwell i had the same problem because i got bored and i was like hmm i wonder if i can change my IP and i tried it and i had the same problem but when i did system restore it still did not work, now i have to get a new operateing system...
View 10 Replies View RelatedI have a new router. this seems to be a very simple problem relating to the most basic configuration options.
Hardware Version: A1 Firmware Version : 1.01NA
go to SETUP -> "NETWORK SETTINGS"
change "Router IP Address" to 192.168.73.1
change "DHCP IP Address Range" to: 192.168.73.10 : 192.168.73.200
Save Changes Wait for reboot. change my client system's local IP address... so that I can reconnect. direct web browser to http://192.168.73.1/
seen: login page has a select-box for a userid, but no text inside. there is no prompt to ask me to login. I press enter (or whatever... I login). every form interface on all web pages looked at have no labels on text boxes.
I did a view source... and used web-dev tools to look at the page. it looks like the apparent js function, show_words(), is not defined.
change ip address and dhcp address range back to default save changes. wait for reboot. reverse changes to local system things are back to normal. login page has useful text. after logging in, there is something to read.
looking at source again. I see, now, that the js function "show_words" is defined in a file called public.js.
I added a new server and created a new static NAT assignment on the ASA 5510 to the server's IP. When I browse to the web to check what public IP it's reporting, it shows the wrong IP. I disabled the network interface on the server, ran "clear xslate", reenabled the network interface, ran "sho xlate" and while the correct translation was in the table, the server still reported the wrong IP address.I even ran a packet trace and it showed the IP address being correctly translated to the proper public IP, but when I browse to the web I get the same erroneous public IP. [code]
View 8 Replies View RelatedI have a new 881 router and am simply trying to change the ip address from the default 10.10.10.1 to 192.168.15.1
I tried doing this both in the CCP Express app loaded on the router, and also using the desktop CCP client. I can change other parameters without any problems, but when I change the ip address of the vlan the program hangs (as expected since the ip address should be changing). I then try to open it back up and reconnect but get no response from the router.
I can ping it no problem, and the http server is running according to the serial terminal.
How i can change my ip address without changing my internet connection??
View 3 Replies View RelatedMuch of the time my wireless printer is offline relative to computers on my LAN because the IP Address has been changed to some value different than what the computer thinks it should be. So I have to figure out what the IP Address is of the printer then modify the printer port on the PC to point to the correct address. If this only happened rarely or if I could easily remember the steps I have to take to remedy the situation, I guess this would not be such a big deal. But it happens a lot and I'm old and alzheimery. So my question is: how do I get the router to assign the same IP Address to the printer all of the time?
View 2 Replies View Relatedhow to change the IP Address on a Dell C3760dn Color Laser Printer?
View 4 Replies View RelatedI'm adding another router to my home network to extend my WiFi range. (Linksys e2500.) I'm trying to change its IP from the default 192.168.1.1 so that it doesn't conflict with my primary (dhcp) router.
To isolate matters I've reset the router to factory settings, turned off my mac's WiFi and then connected the Mac to a Lan port on the router. Now I can view the router's admin page at 192.168.1.1.
Now I change its local IP to 192.168.1.3 and leave the subnet as 255.255.255.0. The router reboots and after several minutes is inaccessible at any IP I try (still hardwired to the Mac with WiFi off). Ifconfig doesn't show the router and the only way I can get it back is to factory reset it again.
I have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop
View 6 Replies View RelatedAfter changing these NIC settings I am no longer able to connect to the internet:
checksum offload -> disabled
speed/duplex -> 100 mbps full
I tried setting it back to what it was before to no avail:
checksum offload -> Rx and Tx Enabled
Speed/Duplex -> Auto Negotiation
I'm still able to ping URLs and IPs, but cant get to any websites or even the modem page. I tried rebooting,power cycling...nothing works so far.
I have two separate wireless networks in my house, one of them is for sharing my NAS data and the other is for Internet.problem is when I connect to the NAS network and after that I change my network to the other network, I can not connect to the internet ( I can connect to the wireless).
Just after restarting I can see the Internet
We recently switched from cable internet to Verizon DSL since my roommate moved out and took his equipment with him. I set up the wireless router last week and got my laptop to work on the wireless connection. Now I am unable to get my boyfriend's computer to connect to it, when it never had this issue before with the previous wireless. The first day I had it set up, it said it connected, with an "excellent" connection strength, but then the status was 'unable to connect.' I was on the phone with the Verizon guy, who after doing a screen share, said it was my IP address.
So I tried resetting my IP through the CMD, with no luck. Now it doesn't even let me connect to the wireless at all. I've tried both the Intel PROSet/Wireless and the Microsoft client to connect (this is running Windows XP) and when I click 'repair' on the Microsoft client, it tells me it couldn't be corrected because it could not renew the IP address. The firewall is currently off and I removed the defunct McAfee that was never renewed anyway[CODE]
I have just had a cctv system installed on my house and am currently working away from home, how do i connect to my ip address to view the cctv images?
View 2 Replies View RelatedThis is a home network and I do use a laptop and a wireless router however I have plugged my laptop directly into the router.
Microsoft Windows [Version 6.0.6002]
Copyright (c) 2006 Microsoft Corporation. All rights reserved.
C:UsersSammm>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : demongrunt7-PC
Primary Dns Suffix . . . . . . . :
Node Type . . . . . . . . . . . . : Hybrid
[code]....
My wife and I are visiting a church which is allowing us to stay for a week with them so fiddling with their router may not be much of an option. Here is what's going on.Both laptops are running Vista 32My latp top, a compaq, has easily connected to their internet.My wife's laptop tried to connect but cannot. Once you try to connect, in about 2 sec you get a "Windows cannot connect to ......" Once you diagnose it says "wireless authentication failed."
View 1 Replies View RelatedThis Dell Latitude D800 shows connected to my network with an IP address and DNS information matches my home computer - I cannot get connected to the Internet unless I put in an IP address. I've run a TCP/IP utility to reset the catalog and all settings. Looked at the hosts file in Start/Run/Drivers - etc folder/hosts, and the last line shows 127.0.0.1 localhost
It was part of a domain when I first started working on it, and I'm trying to get it for use just as a personal PC. It connects to a dock, and that's where the Internet connection is. I've tried wired and wireless, both show connected. I can ping the computer's IP address, the gateway, and the router, and any other IP address out on the Internet that I have tried.
Here's the sys info from your download of TSG SYSINFO utility:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Pentium(R) M processor 1600MHz, x86 Family 6 Model 9 Stepping 5
[Code].....
I get an ip address but will not connect to internet. tried re installing nic card through connectivity tools, contacted isp he said the modem is working properly tried to ping www.comcast.com from run, cmd. will not connect. I can connect with different computer on same modem. reinstalled IE 7, was runnung IE 8, someone said IE 8 could have been causing problem. still can't connect.
View 19 Replies View RelatedMy PC says "invalid IP address" when I try to connect. It says the IP address is 00:00:00:00. it only does this on the computer but works fine on all our laptops. I've been googleing solutions and i have tried the 'ipconfig/release' and 'ipconfig/renew' but this doesn't work. It just comes up with a error (I think its because the computer cant connect). We use a Belkin wireless connector. Its windows xp.
View 1 Replies View RelatedHow to connect printer in lan by use of ip-adress.
View 2 Replies View RelatedCan't connect to internet because there is no ip address to use and internet is not connecting.
View 1 Replies View RelatedMyself and a friend used to play a game over the internet and join via ip address after a few years and upgrades to windows 7 we decided to do this again problem is we cannot seem to be able to connect via ip address using windows 7 does not even work after using port forward on my machine (host) and disabling firewalls on both machines.
View 3 Replies View RelatedI have some questions regarding DNS server addresses,I have in my mind that what if i put a DNS server addresses on the internet connection to avoid connection fault.My questions is where can I get the DNS server addresses? and what is the function of this addresses?What is the connection of DNS server addresses to the Internet service provider?
View 1 Replies View RelatedI was watching netflix on my computer last night and all of a sudden I lost my connection to the internet and my computer said that the local area connection was not a valid ip address and the it was trying to connect to an unknown network. I rebooted...ran a virus amd malware scan....attempted solutions I found online.Nothing has worked. I do not use a wireless router.
View 7 Replies View Related