How can I change my ip address on windows 7. Someone hacked my computer before and now im afraid that he will do it again. I want to secure it by changing my ip address..
View 2 RepliesHow to change ip address in windows 7?
View 1 Replies View RelatedI've had the same IP address for years and want to change it to a new one - I have a dynamic IP but for some reason it will never change.It looks as if it's always static-what settings I need to change on Windows 7 to get it to roll over onto a new IP address?
View 1 Replies View RelatedMy computer was recently cured of a damaged processor and a viral infestation, and it seems to be working properly again, however,I've been unable to connect to my network because the connection gets stuck on "acquiring network address".I am running Windows XP service pack 3 and the network device that isn't connecting is a Realtek RTL8168C(P)/8111C(P) PCI-E Gigabit Ethernet NIC.
View 2 Replies View Relatedwhat I did do was manually set my IP address for my laptop for my wireless. But I no longer needed to do that so I set it back to Automatic. But every minute or so my IP is changing back to 192.168.0.12 which I did change it to, although it is on Automatic. This is my guess to as what it is doing as I have no connection to the internet after about a minute. ipconfig also displays my IP Address as being 192.168.0.12 as well.What I have to do is disable and then reenable my wireless to get it working again.
View 14 Replies View RelatedI can't change only computer name. But if I change both computer name and work group, I could change it.Actually, I want to change only my computer name, not my workgroup name.
View 2 Replies View RelatedI tried changing my ip address using ipconfig / release. I tried to fix what I did using ipconfig /renew but it tells me no operations can be performed on local connection 5 while it's media is connected.
View 12 Replies View RelatedI am trying to configure a router with a satellite connection. I am following a HughesNet guidline. At step four after typing in the required IP address , nothing happens.There is no place to type user name and password.
View 2 Replies View RelatedWhen I try to connect to our domain I get the error message:Changing the Primary Domain DNS name of this computer to "" failed. The name will remain "(name of our domain)" The specified domain either does not exist or could not be contacted.The procedure is the same I've used since Hector was a pup and never had a problem. I can't add users to the domain and can't log on directly to the domain.
View 1 Replies View RelatedI am connected to a static ip network. This network sets local ips to connected computers but general ip is the same: static ip of network. When i go to "whatismyipaddress", I can see this static ip. I want to change my ip address. I have no chance to use proxy server or router connection. Is there a way to change my ip address? (Because some sites ban ip address, ex:rapidshare etc. and I need to change my ip)
View 1 Replies View RelatedI found this good guide how to do it, but some things remain unexplained to meI would like to get more information about step:3. Change the IP address of your current PCMaybe more questions will follow, but that's the only problem I am having right now.
View 11 Replies View RelatedTrying to change my IP address in windows 7. I downloaded Desktop Central 7.Server and Desktop Management Software: Now what am I suppose to do?
View 2 Replies View RelatedI need to change the IP address of existing primary cisco ACS 4.2 (windows based). What is the required procedure to change the IP address?
View 4 Replies View RelatedHow does MAC address filtering secure a network?
View 9 Replies View RelatedMy Network is running Windows Server 2003 and with more than 150 Users. But last week, I notice that a program is changing my DHCP server IP Address scope.
View 2 Replies View Relatedwell i had the same problem because i got bored and i was like hmm i wonder if i can change my IP and i tried it and i had the same problem but when i did system restore it still did not work, now i have to get a new operateing system...
View 10 Replies View RelatedI have a new router. this seems to be a very simple problem relating to the most basic configuration options.
Hardware Version: A1 Firmware Version : 1.01NA
go to SETUP -> "NETWORK SETTINGS"
change "Router IP Address" to 192.168.73.1
change "DHCP IP Address Range" to: 192.168.73.10 : 192.168.73.200
Save Changes Wait for reboot. change my client system's local IP address... so that I can reconnect. direct web browser to http://192.168.73.1/
seen: login page has a select-box for a userid, but no text inside. there is no prompt to ask me to login. I press enter (or whatever... I login). every form interface on all web pages looked at have no labels on text boxes.
I did a view source... and used web-dev tools to look at the page. it looks like the apparent js function, show_words(), is not defined.
change ip address and dhcp address range back to default save changes. wait for reboot. reverse changes to local system things are back to normal. login page has useful text. after logging in, there is something to read.
looking at source again. I see, now, that the js function "show_words" is defined in a file called public.js.
I added a new server and created a new static NAT assignment on the ASA 5510 to the server's IP. When I browse to the web to check what public IP it's reporting, it shows the wrong IP. I disabled the network interface on the server, ran "clear xslate", reenabled the network interface, ran "sho xlate" and while the correct translation was in the table, the server still reported the wrong IP address.I even ran a packet trace and it showed the IP address being correctly translated to the proper public IP, but when I browse to the web I get the same erroneous public IP. [code]
View 8 Replies View RelatedI have a new 881 router and am simply trying to change the ip address from the default 10.10.10.1 to 192.168.15.1
I tried doing this both in the CCP Express app loaded on the router, and also using the desktop CCP client. I can change other parameters without any problems, but when I change the ip address of the vlan the program hangs (as expected since the ip address should be changing). I then try to open it back up and reconnect but get no response from the router.
I can ping it no problem, and the http server is running according to the serial terminal.
I am trying come up with a setup that allows for a computer to simultaneously be connected to the web via a secure wireless network and to provide a shared drive via an unsecured (possibly ad hoc) wireless network.Which is to say, the computer needs to be able to use the web wirelessly via the secure network, and people need to be able to share files with it wirelessly whether or not THEY can use the secure wifi.One last requirement is that I need a this to be something that I can set up in a given location with no more configuration than required to connect to the secured wifi - if the setup requires me to mess around with the configuration of the router for the secure network itself, it won't work.
View 5 Replies View RelatedI want to use RADIUS (of Secure ACS 5.3) to authenticate users within an ISP environment. Users log connect to a network using a point to point connection (L2) and then they are sending a RADIUS request to get IP adresses. Secure ACS is not quite easy to look through in that case.
View 3 Replies View RelatedHow i can change my ip address without changing my internet connection??
View 3 Replies View RelatedMuch of the time my wireless printer is offline relative to computers on my LAN because the IP Address has been changed to some value different than what the computer thinks it should be. So I have to figure out what the IP Address is of the printer then modify the printer port on the PC to point to the correct address. If this only happened rarely or if I could easily remember the steps I have to take to remedy the situation, I guess this would not be such a big deal. But it happens a lot and I'm old and alzheimery. So my question is: how do I get the router to assign the same IP Address to the printer all of the time?
View 2 Replies View Relatedhow to change the IP Address on a Dell C3760dn Color Laser Printer?
View 4 Replies View RelatedI'm adding another router to my home network to extend my WiFi range. (Linksys e2500.) I'm trying to change its IP from the default 192.168.1.1 so that it doesn't conflict with my primary (dhcp) router.
To isolate matters I've reset the router to factory settings, turned off my mac's WiFi and then connected the Mac to a Lan port on the router. Now I can view the router's admin page at 192.168.1.1.
Now I change its local IP to 192.168.1.3 and leave the subnet as 255.255.255.0. The router reboots and after several minutes is inaccessible at any IP I try (still hardwired to the Mac with WiFi off). Ifconfig doesn't show the router and the only way I can get it back is to factory reset it again.
I play this hockey.tk game. I want to change my ip to a different nearby state. For example, If I live in new jersey i'd want to change my ip to New York so I can play the game. How do I change my ip to that? For some reason I got ip blocked on a game.. So I was wondering if there was any way to do that
View 3 Replies View RelatedMy laptop suddenly stopped being able to conect to my home wifi router. It stays at "waiting for network to be ready" while at the back the wifi list stays at "acquiring network adress" for a couple of minutes and then resets to regular disconnected status.All my other wireless gadgets at home can connect with no problem whatsoever.Wifi strength is great and, when disabling security, the laptop connects without a hitch and very quickly. I tried all possible security combinations the router can give me, always using a second wifi device to check if connection and browsing was possible.i tried everything I googled: drivers, firmwares, ipconfig reset renew, started and stopped services, to no avail.
View 14 Replies View RelatedI have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop
View 6 Replies View RelatedI want to disble changing IP in windows XP from registry so users can not change their IP adress. I use a workgroup and don't want to switch to Domain.
View 3 Replies View Relatedhow do i secure a belkin router with windows 7
View 1 Replies View RelatedHaving just installed the E1000 why have I got a public network address '####' which is security type WPA2 -PSK and also public network address '#### - Guest' which is security type - unsecured.Anyone can log onto either wireless network connection but only with the correct password.How do I remove the '####' address and also how do I make the '#### - Guest' address a secure one.
View 1 Replies View RelatedMy laptop suddenly stopped being able to conect to my home wifi router. It stays at "waiting for network to be ready" while at the back the wifi list stays at "acquiring network adress" for a couple of minutes and then resets to regular disconnected status. All my other wireless gadgets at home can connect with no problem whatsoever.Wifi strength is great and, when disabling security, the laptop connects without a hitch and very quickly. I tried all possible security combinations the router can give me, always using a second wifi device to check if connection and browsing was possible.I tried everything I googled: drivers, firmwares, ipconfig reset renew, started and stopped services, to no avail.
View 6 Replies View RelatedI've got an office network that I would like to add a NAS drive to in a Windows 7 environment.
However, I want to make sure the NAS is both encrypted and password protected on the network to make sure someone doesn't just walk off with our company data (by taking the whole NAS with un-encryped info) or logging on through our network.
What would be your recommendation for a NAS setup that would offer total data encryption, great security from non-authorized people on the network, and 100% Windows 7 compatibility?