Computer IP Changing To Manual When Set On Automatic?
May 2, 2011
what I did do was manually set my IP address for my laptop for my wireless. But I no longer needed to do that so I set it back to Automatic. But every minute or so my IP is changing back to 192.168.0.12 which I did change it to, although it is on Automatic. This is my guess to as what it is doing as I have no connection to the internet after about a minute. ipconfig also displays my IP Address as being 192.168.0.12 as well.What I have to do is disable and then reenable my wireless to get it working again.
View 14 Replies
ADVERTISEMENT
Oct 12, 2012
I have a Buffalo WHR-G300N router & I am having probs with assigning a static address to a nas device.I have set up the static ip address i want to use in the nas When I look at the dhcp leases in the router, the device shows up as having an automatic assignment with a different ip address to the one set in the nas.If I manually assign the ip address which I want to use, or, if I edit the automatically assigned entry, the old one stays as an automatic assignment. This means that I then have 2 ip addresses for 1 mac address.When I try to access the nas, with only the automatically assigned address present in the router settings, I can still access it using the ip address I have manually assigned to the nas, even though the manual ip does not show in the router.How can I delete the automatically assigned dhcp lease & just keep my static one??
View 2 Replies
View Related
Feb 8, 2011
I can't change only computer name. But if I change both computer name and work group, I could change it.Actually, I want to change only my computer name, not my workgroup name.
View 2 Replies
View Related
Aug 8, 2012
How can I change my ip address on windows 7. Someone hacked my computer before and now im afraid that he will do it again. I want to secure it by changing my ip address..
View 2 Replies
View Related
Apr 14, 2011
When I try to connect to our domain I get the error message:Changing the Primary Domain DNS name of this computer to "" failed. The name will remain "(name of our domain)" The specified domain either does not exist or could not be contacted.The procedure is the same I've used since Hector was a pup and never had a problem. I can't add users to the domain and can't log on directly to the domain.
View 1 Replies
View Related
Feb 21, 2011
I want to know if its possible to create a Vpn connection ON a router so my router automatically connects through the vpn settings.As a result all the appliances that connect to the router would be connected to the vpn without having to change any settings. Is this possible ?
View 2 Replies
View Related
Oct 23, 2012
We have modem router 4-port with IP range 10.0.0.1 - 30 setting.one port goes to a library where we have a 8-port switch STLAB SWHUB-8p serving 2 pc with auto IP setting (internet works fine)and one port goes to another corner of the library to a switch TP-LINK TL-SF1008D V4.1 .4 pc are connected and a printer all are set with manual IP in an active rang of the router 10.0.0.10 - 14 they have to be on manual IP becuse of the ptinter.they cannot connect to the internet but I get the message connected.If I change them to auto IP - they can connect to the internet, the router gives them an IP.
View 3 Replies
View Related
Feb 18, 2012
i wanna ask a question regarding automatic startup on lms 4.1, i have installed my LMS 4.1 on esxi 4.x . but recently my server sometimes down because the electricity problem. and when my friend push the power button to start the server, the LMS is not automatically active. is it possible to make it automatically active soon after my server power up ?
View 3 Replies
View Related
Jan 16, 2011
I am evaluation the new Anyconnect 3.0 client against Microsoft DA. Everything looks good but I am wondering; Is it possible to have Anyconnect auto connect (based on TND) before user logon without the user activating the client manually?
View 4 Replies
View Related
Mar 22, 2011
I am looking for Prolink H5305g manual in PDF.
View 1 Replies
View Related
Jun 11, 2011
We have reserved ip addresses for all computers in our DHCP server. But sometimes we notice that some of our staffs put manual ip in their computer and so far I have no idea how to trace it from server itself without visiting each computer to check it out.
View 3 Replies
View Related
May 3, 2012
I would like to get a manual in English for the experia box zte h220n.
View 1 Replies
View Related
Jun 25, 2011
Where can I download the user manaul for this switch, not the quick start guide?
View 1 Replies
View Related
Sep 27, 2012
I am having a public IP address and it is not configured on any of the router interface on my Cisco router. I am having 3 internal networks. Is there any way to PAT all these 3 internal networks to this public IP?
View 3 Replies
View Related
May 15, 2012
im working in company that develop high speed networking equimpnet(Mellanox)we develop 4056GB network cards and switches.we have developer network on HP pro curve switchs, the engineering make tets on servers with the high speed network cards and sometimes the test "go out" from the 4056GB network cards and switches and "boombing" the regular network of 1G in hp swiches.i meen every server are connecting with RJ-45 cable for access to the server and the real work is on th Mellanox switches and network cards but sometimes the test "run away" to the ethernet network and 40G traffic are killing the network.function in HP switches that recognize over booking traffic and automatic disable the bombed port?now we have spening tree and brodcaste limit on every switch but its not enough, the big traffic kill the network until we disable the problematic port and igonre the bombing server.we have hp procurve 5610 layer3 switch and pro curve 2510 switches.
View 4 Replies
View Related
Sep 7, 2011
I'm a heavy PC Gamer, I play games such as World of Warcraft, Borderlands, Call of Duty, Steam Games, I also know my way around fixing internet issues, But this one just seems to have gotten me off guard, Recently, 1-2 days ago, I was browsing the internet like a normal day, and It was late, so I decided to go to sleep, Turned my computer off, Woke up the next morning, Turned it on, It then shows that I kept getting kicked off the LAN for some reason, It was like this[CODE]
View 2 Replies
View Related
Dec 28, 2011
Is there a "best" channel to use for the router -- e.g. the one that would provide maximum range? I live in a fairly large home and the connection deteriorates in some rooms (not lost altogether, but weaker). Also, what is "channel width"? It's set to 20MHZ, but there is also a setting for Automatic 20/40MHZ. What's the adv advantage of one setting over the other?
View 9 Replies
View Related
Jun 6, 2013
I know that configuration in 8.2.x and 8.4.x is different in terms of NAT and object groups.
I just want to know is it possible to do a direct upgrade from 8.2.3 to 8.4.x ?Secondly, will ASA automatically convert all the configuration from 8.2 to 8.4 format during the reboot after the upgrade?
View 2 Replies
View Related
Jun 13, 2012
A few months back, my computer stopped connecting to networks. Through some process or another, I ended up "fixing" it by manually inserting the ipv4 settings. Apparently that only allows it to connect to my router though, as public wi fi won't work for it. If I leave the ipv4 settings set to automatically obtain information, the computer won't connect to the network. It will stay on the "identifying network" part indefinitely. In addition, I can't connect through the modem directly either, manual settings or not.
Here is the ipconfig while ipv4 is in auto-obtain
Windows IP Configuration
Host Name . . . . . . . . . . . . : Home
Primary Dns Suffix . . . . . . . :
[Code].....
View 14 Replies
View Related
Mar 14, 2013
Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
Region : Others
I have MR3220 version 2 and HUAWEI E398 stick.It connects to 3G/4G network, but with wrong APN.It seems to me that manualy changed APN can not be applied. [code]
View 4 Replies
View Related
Jun 19, 2011
I upgraded wcs to version 7.0.172 and migrated it to new server and ip address. The upgrade was done by install wcs 7.0.172 on new server and restoring a backup. I also upgraded the location appliance from 6.0.101.0 to 6.0.202.0. The wcs can see the location appliance without a problem. The problem occurs when i try to backup the location appliance. The wcs appears to run the backup and completes with a success but i cannot find the backup file in the ftp directory. wcs backup to ftp folder is fine.is a there a way of doing a manual backup the location appliance what logs can i check to see whether the backup is taking place or not?
View 2 Replies
View Related
Feb 8, 2013
I am trying to bind Mac address manually to IP in Cisco 881 router so that if user wants to change the IP address also they should get the same IP.
I have configured as below but it is not working.
ip dhcp pool Test
host 192.168.0.10 255.255.255.0
hardware-address xxxx.xxxx.xxxx.xxxx
this IP was excluded from dhcp range
ip dhcp excluded-address 192.168.0.10
View 11 Replies
View Related
May 8, 2013
WRVS4400N needs to be manually connected when the power is recycled after power failure. Is there a setting to connect an IPSEC VPN automatically, instead of manually going in to connect the VPN
View 3 Replies
View Related
Mar 27, 2012
I open the IE, it takes about 3 minutes to open up.Its says at the bottom left corner "detecting proxy settings". I went to Tools>Internet Options>Connections Tab>LAN settings> and unchecked Automatically detect settings, but still did not work.
View 3 Replies
View Related
Mar 17, 2011
First time on this forum: I have a client running a Windows 2008 server, Windows 7 OS. We set the default printer as the server file cabinet printer, however, between logging off in the evening and back on in the morning the default printer switches to his local printer
View 2 Replies
View Related
Nov 9, 2012
Is there any solution for automatic switching between wired and wireless network connection?
In my work we have two option for connection to network. Wired for working but with blocked pages like youtube and other streaming media. And wireless for visitors which haven't blocked any pages but I can't do my work on it. Can I by connected to both and some utility will doing switching between them? I want to use streaming and be connected to wired network which has blocked streaming.
View 1 Replies
View Related
Jul 19, 2012
It works fine on both my pc and wifi laptop, provided I give a fixed DNS server that was entered by my internet provider. My IP address is set to 'obtain IP address automatically' but my DNS is set to a preferred DNS by the provider. I have to set this on my notebook as well in order to access internet. If I set it to obtain DNS server automatically, internet stops working on that machine.roblem is when I try to access internet through my phone it does not work, because I have no option to enter a DNS server there. Internet works fine on my phone using another wifi router where the obtain dns address automatically is enabled.
View 1 Replies
View Related
Mar 23, 2011
in the ASA Migration Guide for Version 8.3 says about real ip address: "All of the access-listcommands used for these features are automatically migrated unless otherwise noted"
But my ACL's have not been migrated to real ip address. In my migration log:
INFO: NAT migration completed. Real IP migration logs: No ACL was changed as part of Real-ip migrationWhy?So, do I have to migrate them manually?
View 3 Replies
View Related
Jan 3, 2012
I'm having an issue with McAfee Antivirus remediation. I'm using Cisco NAC 4.8.2 and it seems that automatic remediation is not working.Is there a webpage where we can check which AV can do automatic remediation?
View 1 Replies
View Related
Mar 2, 2012
I would like to schedule automatic backups of our ASA5500's OoO-hours:
1. SSH from secure server and create _FULL_ backup - what would be the CLI command(s) ?
2. SCP from secure server and retreive file(s) - what is the location of the file(s) ?
View 12 Replies
View Related
Oct 10, 2012
we have a AP cisco AIR-AP1131G-E-K9 Version 12.4(10b)JA, and we would like to do automatic backup of CLI configuration to one server, and we dont know how to do.
For example: On router and switch we use this kind of configuration to do automatic backup: [code]
View 1 Replies
View Related
Aug 20, 2012
I try to let Cisco ASA automatic select a tunnel group for users, after user input username and password. I try to do this without user selection a connection profile on login page. Authentication on ASA<>ACS 5.3<>MS AD. How i can will do this? Radius attribute class=group_policy don't work.
View 1 Replies
View Related
May 7, 2013
How often does ACS 4.1 purge dynamic users from it's user group after inactivity?
We're trying to disable access to certain resources via a NAR, and finding that some users are not in the ACS dynamic user database, despite that, at one point in the past, they have used it.
Am I correct in assuming that a user that has never authenticated via an ACS-controlled resource would not be in the database?
View 6 Replies
View Related
