Wireless :: Prolink H5305g Manual PDF?
Mar 22, 2011I am looking for Prolink H5305g manual in PDF.
View 1 Replies
ADVERTISEMENT
Wireless :: Prolink WGR 1004 Router - No Internet Connection
Jun 5, 2011I bought a Prolink Wireless Router WGR1004 and I have problem connecting it with internet. My windows able to detect and connect to the Wireless connection but the internet browser cannot display any webpage. I have a Linksys WB300 ADSL Modem when wired to my pc it pings IP 192.168.1.3 , default gateway 192.168.1.1 My connection to Wireless pings IP 192.168.1.2, default gateway 192.168.1.1ADSL phone cable connected to my modem and Ethernet cable linked from Modem to Internet Port of Wireless router. Settings in Network Connections=>properties=>TCP/IP=>Obtain an IP address automatically and obtain DNS Server address automatically. Web browser connections settings=>Internet Options=>Lan settings=>Automatic detect settingsRouter Configuration=>Lan IP address is 192.168.1.254 Internet IP address is 192.168.1.2, Security and SSID are working properly. The problem is my web browser cannot display webpage.
View 1 Replies View RelatedTP-Link Dual-Band Wireless :: Prolink Get DHCP Address From The Wan Port Of TL-WDR4300?
Jan 28, 2013Region : Philippines
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
I have a PROLiNK H5001N ADSL Wireless Modem using bridge mode to my TL-WDR4300. I login to my ISP using the TL-WDR4300 with secondary connection to my modem so that I can open the modem setup page.
1.) My question is can the Prolink get DHCP address from the Wan Port of TL-WDR4300?
2.) Can I still use the Wifi of the modem to get internet?
3.) If I connect my ISP to Prolink then connect TL-WDR4300 thru static connection, will the NAT and Hardware NAT still work in the TL-WDR4300?
NOTE: the latest firmware built TL-WDR4300_V1_121225 seams to have internet connection lost problem after a few minutes. I reverted back to 3.12.23 and the problem is gone.
Cisco Wireless :: SG-300-52 User Manual?
Jun 25, 2011Where can I download the user manaul for this switch, not the quick start guide?
View 1 Replies View RelatedLinksys Wireless Adapters :: AE3000 - Invalid Manual Key?
Jul 1, 2012I keep on getting this error from my adapter I am trying to install. Here is what I copied.
Error description: Invalid key Manual
Model name: AE3000
Operating system: Windows 7 SP 1
Software version: 1.0.0.3
The password I had from my connection is correct. I checked it about 3 times, and it keeps on saying it is wrong? Does this mean I have to reset my router?
Linksys Wireless Router :: Where To Find Manual For E1000
Dec 24, 2012Where do I find a manual for the LinksysE1000?
View 1 Replies View RelatedCisco Wireless :: AIR-ACCRMK1300 Mounting Manual Required
Jul 30, 2012I need some manual about how to use AIR-ACCRMK1300=.Is there any offical manual?
View 4 Replies View RelatedRealTek 8187 / Manual Selection Of Wireless Access Point?
Apr 18, 2012I have a RealTek 8187 USB wireless adapter on my desktop computer that has an associated utility that allows me to manually select which of several competing WAP's to connect to. But that is good only for that particular adapter. My laptop has a different make of adapter that does not have this capability and many of my friends and neighbors lack the capability also. I have a situation where when I turn on my desktop, it automatically connects to a certain WAP, presumably because it has the strongest signal. However, at certain times of the day, traffic or other unknown interference blocks internet access for varying periods of time. I can usually go to my RealTek utility and switch connections to another WAP that has somewhat less signal strength (for example from Channel 1 to Channel 9 -- all within the same Wi-Fi network). Almost always I can restore internet access by doing this.is there generic software available that allows manually selecting WAP channels regardless of the particular brand of wireless adapter being used. Or is there some setting in either Windows XP or Windows 7 that would allow selectively choosing to connect to one channel of a network rather than another even if the signal strength is less.
View 5 Replies View RelatedLinksys Wireless Router :: E2500 - Error Message Invalid Key Manual
Apr 14, 2012I recently bought the E2500 Router and I am using the EA2500 Adapter with it . I have this set-up on 2 Desktop PC's . 1 Pc is working just fine with this set-up . The other keeps giving me an Error message of "Invalid Key Manual" . What does this mean ? The adapter is working because it does find the Router as a usable connection . It just isn't able to connect to it and keeps giving me the same Error message .
View 8 Replies View RelatedLinksys Wireless Router :: E3200 Manual Configure Ipv6 Settings?
Jul 9, 2012Do you know when will be possible to manual configure ipv6 settings? I have all parameters from my ISP but the settings on the router are only automatic and 6rd. Is it possible to enable this in future firmwares?
View 1 Replies View RelatedLinksys Wireless Router :: EA4500 Manual Way To Configure Network Gear
Aug 4, 2012I have had several Linksys and Cisco routers in the past, and I'm a network engineer. My E3000 died after only 18 months so I had to run down and buy a new router, thus the EA4500.
I use the manual way to configure all my network gear. Nothing on my network changed, except the router replacement.If I leave the router default address at the 192 range, DHCP will issue a IP address. However, I do not use that range and after cdhanging the range, setting my start IP address, etc, I save everything and even tried rebooting the router to no avail. The router will not issue a DHCP addrss if you change the default range.
I can manually configure my clients with a static IP and all is good, no issues at all. I just can't get DHCP to work. My E3000 was configured exactly the same way and worked just fine, well up until two days ago.I have tried upgrading to the latest router firmware, so I'm not on 2.0.37 and I did set the router back to Factory Defaults, rebooted, then configured it, and still no DCHP.
Linksys Wireless Router :: E4200 V2 Firmware 2.0.37.131047 Manual Download?
Apr 27, 2012The device has been trying for days to auto-download and all it does is fail constantly. Saying that my connection is slow - gee, I have FiOS, I know it's not slow,maybe it's your Servers Cisco?Well, where can I obtain the direct DL link to that firmware file instead of relying on an unreliable device to get it and apply for me?
View 4 Replies View RelatedLinksys Wireless Router :: E4200V2 Manual Download And Firmware Upgrade
Jun 6, 2012I have a 4200V2 acting as a Router and (2) more E4200V2's acting as Access Points,The E4200V2 acting as the Router is at Firmware 2.0.37, but, the other Access Points are at Firmware 2.0.36.126507 and when I try to have the Firmware Upgrade Utility in Setup update the Firmware it gives me this message:"Current Version: 2.0.36.126507Available Upgrade: Your router software is up to date"Where is the downloadable Firmware 2.0.7 located?How do I upgrade the Firmware Manually to 2.0.7 and should I ?
View 6 Replies View RelatedLinksys Wireless Router :: E4200v2 DHCP - Make Manual Reservation Of IP Address Range?
Mar 26, 2013E4200v2, firmware 2.1.39.145204
Router says "Invalid IP address" when I try to make a manual IP address reservation of the IP address range.
Example: local network 192.168.1.0/24, where .1 is a router, .2 is a reservation, .20-.50 is a range for DHCP.
Before upgrade I didn't have this problem.
Dell :: XPS M1530 Does Not Recognize Wireless Network Adapter After Manual Reinstallation Of Vista / Drivers
Nov 25, 2008Problem I've been having with my laptop. Following the directions of a Dell technician while trying to resolve a separate problem, I deleted the partitions on my hard drive and manually reinstalled both Vista and all the drivers that were on the Dell CD that came with my laptop. When I tried connecting to the internet, Vista said I did not have any wireless networking hardware, but before the reinstallation it worked just fine. I am able to connect to the internet using a wired connection, but my wireless adapter still isn't working. I use Windows Vista 32-bit SP1
View 8 Replies View RelatedCannot Use Manual IP Setting Through Switch
Oct 23, 2012We have modem router 4-port with IP range 10.0.0.1 - 30 setting.one port goes to a library where we have a 8-port switch STLAB SWHUB-8p serving 2 pc with auto IP setting (internet works fine)and one port goes to another corner of the library to a switch TP-LINK TL-SF1008D V4.1 .4 pc are connected and a printer all are set with manual IP in an active rang of the router 10.0.0.10 - 14 they have to be on manual IP becuse of the ptinter.they cannot connect to the internet but I get the message connected.If I change them to auto IP - they can connect to the internet, the router gives them an IP.
View 3 Replies View RelatedComputer IP Changing To Manual When Set On Automatic?
May 2, 2011what I did do was manually set my IP address for my laptop for my wireless. But I no longer needed to do that so I set it back to Automatic. But every minute or so my IP is changing back to 192.168.0.12 which I did change it to, although it is on Automatic. This is my guess to as what it is doing as I have no connection to the internet after about a minute. ipconfig also displays my IP Address as being 192.168.0.12 as well.What I have to do is disable and then reenable my wireless to get it working again.
View 14 Replies View RelatedFind Out Who Have Manual Ip When Addresses Reserved?
Jun 11, 2011We have reserved ip addresses for all computers in our DHCP server. But sometimes we notice that some of our staffs put manual ip in their computer and so far I have no idea how to trace it from server itself without visiting each computer to check it out.
View 3 Replies View RelatedGet A Manual In English For Experia Box Zte H220n?
May 3, 2012I would like to get a manual in English for the experia box zte h220n.
View 1 Replies View RelatedCisco WAN :: PAT Configuration With Manual IP In 2921
Sep 27, 2012I am having a public IP address and it is not configured on any of the router interface on my Cisco router. I am having 3 internal networks. Is there any way to PAT all these 3 internal networks to this public IP?
View 3 Replies View RelatedCan't Connect To Network Without Manual Ipv4 Settings
Jun 13, 2012A few months back, my computer stopped connecting to networks. Through some process or another, I ended up "fixing" it by manually inserting the ipv4 settings. Apparently that only allows it to connect to my router though, as public wi fi won't work for it. If I leave the ipv4 settings set to automatically obtain information, the computer won't connect to the network. It will stay on the "identifying network" part indefinitely. In addition, I can't connect through the modem directly either, manual settings or not.
Here is the ipconfig while ipv4 is in auto-obtain
Windows IP Configuration
Host Name . . . . . . . . . . . . : Home
Primary Dns Suffix . . . . . . . :
[Code].....
TP-Link 3G/3.75G Router :: TL-MR3220 Manual APN Settings
Mar 14, 2013Region : Argentina
Model : TL-MR3220
Hardware Version : V2
Firmware Version :
Region : Others
I have MR3220 version 2 and HUAWEI E398 stick.It connects to 3G/4G network, but with wrong APN.It seems to me that manualy changed APN can not be applied. [code]
Cisco :: 7.0.172 / Manual Backup The Location Appliance?
Jun 19, 2011I upgraded wcs to version 7.0.172 and migrated it to new server and ip address. The upgrade was done by install wcs 7.0.172 on new server and restoring a backup. I also upgraded the location appliance from 6.0.101.0 to 6.0.202.0. The wcs can see the location appliance without a problem. The problem occurs when i try to backup the location appliance. The wcs appears to run the backup and completes with a success but i cannot find the backup file in the ftp directory. wcs backup to ftp folder is fine.is a there a way of doing a manual backup the location appliance what logs can i check to see whether the backup is taking place or not?
View 2 Replies View RelatedCisco Switching/Routing :: 881 - Manual Binding Mac To IP?
Feb 8, 2013I am trying to bind Mac address manually to IP in Cisco 881 router so that if user wants to change the IP address also they should get the same IP.
I have configured as below but it is not working.
ip dhcp pool Test
host 192.168.0.10 255.255.255.0
hardware-address xxxx.xxxx.xxxx.xxxx
this IP was excluded from dhcp range
ip dhcp excluded-address 192.168.0.10
Cisco Routers :: WRVS4400N VPN Needs Manual Connection?
May 8, 2013WRVS4400N needs to be manually connected when the power is recycled after power failure. Is there a setting to connect an IPSEC VPN automatically, instead of manually going in to connect the VPN
View 3 Replies View RelatedBuffalo WHR-G300N Router - Automatic DHCP To Manual
Oct 12, 2012I have a Buffalo WHR-G300N router & I am having probs with assigning a static address to a nas device.I have set up the static ip address i want to use in the nas When I look at the dhcp leases in the router, the device shows up as having an automatic assignment with a different ip address to the one set in the nas.If I manually assign the ip address which I want to use, or, if I edit the automatically assigned entry, the old one stays as an automatic assignment. This means that I then have 2 ip addresses for 1 mac address.When I try to access the nas, with only the automatically assigned address present in the router settings, I can still access it using the ip address I have manually assigned to the nas, even though the manual ip does not show in the router.How can I delete the automatically assigned dhcp lease & just keep my static one??
View 2 Replies View RelatedBelkin Hi Speed Wifi G Router - Always Needs Manual Dns Change
Oct 12, 2011I've been having this problem with my Belkin router since day 1 when i got it.( not new, got from buddy's place) It's Belkin HI Speed Wifi G router, and what's really frustrating is, everytime i connect to it, I need to manually change the DNS address and switch between 4.2.2.2 & 4.2.2.4 in order to get internet access! Sometimes it even cuts off the internet during a session, without me even disconnecting from the wifi network, where I would again need to switch back and forth to the 2 or 4 ending!
View 3 Replies View RelatedAcer Laptop 5733Z Aspire User Manual?
Oct 18, 2011I don't think I ever set up my laptop for home WIFI. There is only one choice, (being Belkin) in Home Group and would like to take my puter to another room in my house using my WIFI modem occasionally. It did work fantastic at a friends house hooking up to their WIFI. I have been looking for a manual to download, but can't seem to find one on line or at the Acer home page.
View 1 Replies View RelatedWestern Digital Wd Livewire Powerline Av Network Kit Manual
Feb 8, 2013Western digital wd livewire powerline av network kit manual?
View 1 Replies View RelatedHome Network :: Create A Manual Route Into Laptop
Jun 6, 2012My laptop have 2 NIC attach it, the cable NIC and Wireless NIC, the cable one connect to my lab network environment and the Wireless connect to office network environment (connect to internet) which both have differen segments [code] when my Wireless was turn off my pc can ping to all segment on my lab network environment, but if the wireless was turn on, i cant ping to others segment but only my laptop segment and i still could surfing to the internet without any problem.then i tried to add a new route from my laptop using "route add x.x.x.x mask x.x.x.x (gateway)" in command line and after that i can ping back to all segment in my lab network environment eventhough my wireless was onwhy i have to create a manual route into my laptop so that i can have connection between my laptop and my lab environment in the condition my wireless turn on ??
View 8 Replies View RelatedD-Link DCS-942L :: IR Lights Stay On In Manual Mode
Mar 29, 2013I was trying to set this up pointed out a back window, but obviously ran into the IR lights reflecting back on the glass. I don't have an external IR light yet, but just tried the manual IR mode and the IR lights stay on.
View 9 Replies View RelatedCisco Switches :: Manual Multicast ARP Entry For SG300
Jan 22, 2012We're replacing our older catalyst switches with new SG300 family switches and have a Microsoft NLB cluster for some services that run in multicast balancer mode.
We currently do L3 routing to the network with the cluster and have the following IOS configuration line in the specific switch to let users on other subnets to access the services.
arp 10.20.1.226 03bf.0a14.01e2 ARPA
How do we replicate this using the SG300 series in L3 mode? Whenever I try to add a manual ARP entry I get an error message that says that the MAC address is not a valid unicast address?
Cisco :: 1500 LMS4 Manual Device Discovery
Nov 7, 2011I have a very special usecase with migrating devices from LMSv2.6 to v4.1 using DCR bulk import that was maintained manualy, not by discovering.The special thing is each device has its own SNMP-community and its about 1500 devices.RME discovery works fine, but I get the devices not discovered by DCR (CSDiscovery), because I need a minimal DCR discovery configration containing Seed and SNMP-settings. So I activated DCR as seed, but cant skip SNMP settings without an entry. But in this case I would need 1500 SNMP-lines that would be very unhandy. is in CSDiscovery-Settings a possibility to can leave SNMP settings untouched so it takes the credentials from the DCR, to can start DCR discovery?
View 6 Replies View Related