Wireless :: Prolink WGR 1004 Router - No Internet Connection
Jun 5, 2011
I bought a Prolink Wireless Router WGR1004 and I have problem connecting it with internet. My windows able to detect and connect to the Wireless connection but the internet browser cannot display any webpage. I have a Linksys WB300 ADSL Modem when wired to my pc it pings IP 192.168.1.3 , default gateway 192.168.1.1 My connection to Wireless pings IP 192.168.1.2, default gateway 192.168.1.1ADSL phone cable connected to my modem and Ethernet cable linked from Modem to Internet Port of Wireless router. Settings in Network Connections=>properties=>TCP/IP=>Obtain an IP address automatically and obtain DNS Server address automatically. Web browser connections settings=>Internet Options=>Lan settings=>Automatic detect settingsRouter Configuration=>Lan IP address is 192.168.1.254 Internet IP address is 192.168.1.2, Security and SSID are working properly. The problem is my web browser cannot display webpage.
View 1 Replies
ADVERTISEMENT
Mar 22, 2011
I am looking for Prolink H5305g manual in PDF.
View 1 Replies
View Related
Jan 28, 2013
Region : Philippines
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
I have a PROLiNK H5001N ADSL Wireless Modem using bridge mode to my TL-WDR4300. I login to my ISP using the TL-WDR4300 with secondary connection to my modem so that I can open the modem setup page.
1.) My question is can the Prolink get DHCP address from the Wan Port of TL-WDR4300?
2.) Can I still use the Wifi of the modem to get internet?
3.) If I connect my ISP to Prolink then connect TL-WDR4300 thru static connection, will the NAT and Hardware NAT still work in the TL-WDR4300?
NOTE: the latest firmware built TL-WDR4300_V1_121225 seams to have internet connection lost problem after a few minutes. I reverted back to 3.12.23 and the problem is gone.
View 3 Replies
View Related
Oct 25, 2010
ASR 1004, has a image, which is on the harddrive, not bootflash and we have no boot commands in the configuration…We are running the ROMMON version ‘15_01rs’ The ASR boots into Rommon, as it cannot find a image (as expected), as the configuration has no boot commands.Trying to TFTP or getting an IOS back into bootflash is proving problematic.Follow all TFTP commands..
rommon 1 > IP_ADDRESS=10.1.1.1
rommon 2 > IP_SUBNET_MASK=255.255.255.0
rommon 3 > DEFAULT_GATEWAY=10.1.1.1
rommon 4 > TFTP_SERVER=10.1.1.2
rommon 5 > TFTP_FILE=asr1000rp1-adventerprisek9.03.01.01.S.150-1.S1.bin
[code]....
View 5 Replies
View Related
Feb 14, 2012
how to show all the module on the ASR 1004?
View 4 Replies
View Related
Jun 2, 2013
I did a software upgrade in ASR 1004.Before, i validate the butes quenatity, and verify the /md5 and SHA1 checksum, and both appear ok. [code]
View 1 Replies
View Related
Jun 12, 2011
we are going to build L2L IPSEC VPN on ASR 1004 at our new datacenter edge. but i don't find any familiar CLI on my 1004. any special license,IOS-XE version or processor is required ? ASR1000-ESP10 is necessary ?
View 2 Replies
View Related
May 2, 2012
From PEC training - Cisco says to perform a proper ASR 1004 shutdown by executing 'reload' , then wait for bootstrap message to appear, then [before commencement of unpacking of the IOS] turn off the power switch. IS THIS ACCURATE. Anyone have any doc related to the recommended POWER DOWN process on the ASR 1004. We have a UPS cutover coming up and I want to be ready to power down and restart the new ASR 1004s we have - properly.
View 3 Replies
View Related
Jan 31, 2010
I'm moving this [ URL], discussion here because I feel I will get a quicker response. In a nutshell the setup is as below:
ASR1004=={ GRE }==C7206
I need to run layer 2 services between the 2 without mpls support from the service provider. Unfortunately there is no specific detail on getting EoMPLSoGRE up and running. I have the GRE tunnel working and I have mpls forced to my loop backs and the x connect configured on the 2 router interfaces. However the mpls forwarding table on the 7206 shows the outgoing interface is 'none' and I cannot pass any traffic across.
7206>sh mpls forwarding-table Local Outgoing Prefix Bytes tag Outgoing Next Hop tag tag or VC or Tu [code]...
On the ASR it looks fine: asr>sh mpls forwarding-table labels 201Local [code]...
View 3 Replies
View Related
Jul 19, 2012
On the Cisco forums, an example is shown for how to configure BVI and bridge-groups on an ASR1004 but the same command (bridge-group) is not available under the interface on our ASR routers. We are running version of code: asr1000rp1-advipservicesk9.03.06.00.S.152-2.S.bin
View 1 Replies
View Related
Jul 19, 2012
I am in the process of staging a couple of two new Cisco ASR 1004's which are located at two locations with a WAN link in between. I need to set up connectivity between servers plugged directly into each ASR router across the WAN link. The ASR has 16 gig interfaces (gi0/0/0 - gi0/0/7 and gi0/1/0 - gi 0/1/7), and a management interface (gi0). I have connected the WAN link to gi0/0/0 and put an ip address on it. The servers will be plugged into the remaining gig interfaces. I tried to create an SVI (vlan interface) in an attempt to create an L3 interface to support routing to these servers but these routers don't allow SVI's to be created. how to put these server connected ports on a vlan and to create an L3 interface to provide routing to them?
View 1 Replies
View Related
Jun 28, 2011
i just configued a L2L tunnel between ASA 5510 and ASR 1004. tunnel is up but got serious packet lost (more than 70%) and isakmp always up-down intermittently.i compared parameters on both sides again and again but no luck. [code]
View 4 Replies
View Related
Nov 29, 2012
on the asr 1004 , how test and check if the SFP receive power or signal from the MUX? any command to do that?
View 3 Replies
View Related
Aug 29, 2012
is there a command available to run diagnostics in ASR port/SPA? the one below is from a juniper remote device. i was only able to find 'test interface' but haven't run this yet (currently in production).
View 5 Replies
View Related
Mar 6, 2013
We bought a pair of ASR 1004 to be installed at Primar & Secondary data center and one thing is to run OTV over it, but to do that, I have to extend multiple VLANs from my Core (Pair of Nexus 7010s) connected directly to the ASR is Primary Data center, I looked at some documents but didn't get a good idea about it, extend multiple VLANs from Nexus switch to an ASR.
View 2 Replies
View Related
May 16, 2011
I just purchased a Vizio Dual-Band HD wireless internet router, completed the steps on the quick start guide and I can get internet connection using my desktop but I cannot get internet connection using my MacBook. I went to [url]... and in the top right corner, it says "Offline" on the router. How do I make it say "Online"?
[code]....
View 14 Replies
View Related
Dec 15, 2012
my router has intermet but i cannot get a connection to my computerbut its not just my computer my bfs computer our PlayStation nothing can connect to it right now i tried going in network and settings and diagnosing it and i tried unplugging the motem amd all the wires nothing is working. Two of the lights on the motem are green one is orange the wirless is lighting up blue. This is not the first time either....it came back after a while last time but now its not.
View 3 Replies
View Related
Dec 12, 2011
My main Internet connection is a frontier modem /router It is on the main level of the house. In the basement I am trying to set up the cisco E3000 through an Ethernet cable.
View 4 Replies
View Related
Jul 3, 2011
I want to share my wireless connection witch is coming from distant internet provider, to my desktop computer with wireless adapter. I have tplink wireless router witch is connected trough wan port to my lan network card also in desktop computer.So is there something wrong with this setting because i can not properly finish wireless router auto configuration wizard, it always return my error.
View 1 Replies
View Related
Jan 29, 2011
normally insert the D-link CD in my computer and then follow the steps. this time in the step that all connectivity was being checked the message appeared that one of the cables (ethernet or the other one) is not connected whereas I am quite sure that they are properly connected and nothing at least as far as I know is wrong.after several times, I could connect to the wirelss connection but actually there was no internetwhen I also tried with cable directly from wall jack to my computer it was also the same case.
View 4 Replies
View Related
Sep 2, 2011
I am trying to use my pc's internet connection that I am getting from a cricket wireless device to go to a linksys wrt54g router. I believe it should be possible to enable ICS and hook up a cable from the nic on the pc to the wan port on the router but have not been able to get it to work so far.
View 6 Replies
View Related
Jun 30, 2012
I have a wireless router which is connect to a DSL modem. Everything was working fine but now the wireless router looses connection often and if i remove the RJ45 check from my wireless router and plug it in after few minutes it works but again it looses connection.
View 2 Replies
View Related
Jul 1, 2012
We have highspeed internet that comes in at our house, but we want internet in our shop. We have a wireless dongle outside of the building and it picks up the signal for the main computer from the main wireless router. Because it is a metal building we cannot get a wireless signal inside the building otherwise. I want to hook a wireless router up to the computer in the shop, share the internet connection, and broadcast the signal throughout the shop so I can use wireless in the shop.
View 1 Replies
View Related
Jan 25, 2012
I have 1 mbps internet connection and I got two computers to be connected. optimum configuration of the router required.
View 5 Replies
View Related
Aug 31, 2011
Just moved into apartment in Ann Arbor and am forced to use this ISP. They are not wireless friendly. Their manual sucks and will only provide tech support for $80/hour. I bought a Belkin router and got it working for my MacBook. BUT my roommate can't connect, even tho her MacBook sees the network. And I can't print to my wireless printer even tho it says everything is fine when I run the wireless diagnostics.The ISP has these rules:
- Only connect the router to the Internet or Wan port. Do not connect to the numbered ports (how do I know whether or not I've done that?)
- Do not use static IP addresses
- Do not run a DHCP server
View -1 Replies
View Related
Sep 7, 2011
I recently had to unplug my Linksys WRT54GL wireless router when doing some rearranging and now i'm unable to get a internet connection. I've confirmed the modem is actually working by connecting my laptop directly (which worked), but when I connect the Linksys WRT54GL wireless router to my modem the internet connection goes away. The connection is lost when connected via wireless and hardwired to one of the back ports. I've tried resetting the modem, router and computer and read every forum out there trying to find something, but i'm still stuck.
View 5 Replies
View Related
Jul 10, 2011
We have Comast internet using an Arris modem and have a Netgear wireless router. We have our modem hooked up to a desktop computer that we don't even use. We have three laptops that we us with our wireless.Comcast has told us that we have to have the modem hooked up to the desktop for the internet to work.what do people do who have only a laptop and have wireless internet in their house?Is there anyway to get rid of the desktop and have the modem hooked directly to the cable and router?
View 4 Replies
View Related
May 26, 2011
I have 3 computers running Windows-7. One computer is directly attached with wired connection to broadband internet modem and other 2 computers are attached through a Wireless router attached to modem. The problem is this that both wireless computers are running internet well while the directly connected computer shows internet connection but no data flow happens. When the Wireless router is turned off the directly connected computer starts working internet.
View 2 Replies
View Related
Jan 28, 2012
My wireless connection keeps connecting and dis connecting. My computer says our wirless network is available but after connecting it randomly disconnects and reconnects over and over.
View 1 Replies
View Related
Sep 14, 2012
Dell desktop to internet wireless connection to router?
View 1 Replies
View Related
Oct 14, 2011
I had recently purchased the E1200 router. For some reason, my internet keeps going in and out of service. I will be playing an online game but get disconnected from the server every 6-8 seconds. I tested if it could be my internet provider, but when I connect via Ethernet cord to my modem, it works great. If I run the Ethernet through my router or try wireless connections, it tends to go in and out. It only seems to do this some of the times.
View 1 Replies
View Related
Oct 2, 2012
I have a WRT310N router and suddenly it stopped connecting to the Internet. I can't ping anything from the router page. I tried restarting it a few times, unplugged it, left it off for a few minutes, plugged it back in, upgraded the firmware, still not working. I tried another router and it works fine. When connected directly to the modem, it works fine, so the problem has to come from the router.
I can connect to the router through wired or wireless just fine, I just can't access the internet.
View 2 Replies
View Related
Apr 21, 2012
I have my e4200 connected to another modem/router (2Wire 3600HGV), because the other router does not support Wireless N. I can connect to my E4200 network, but there's just no connection to the internet. I reseted my e4200 but still no luck. I've unplugged both routers and replugged them, nothing. I know it's possible because I've had it set up before but I had my 2Wire exchanged for a newer one.
Firmware: 1.00.4
Just to be sure. I have the cable going from my modem out of port #1 and into my e4200 where it says internet, thats correct, right? On my e4200 i have the IP 192.168.1.2 but on the 2Wire I have the e4200 as 1.92.168.1.66.
View 1 Replies
View Related
