Linksys Wireless Router :: E1200 Internet Connection Keeps Going In And Out
Oct 14, 2011
I had recently purchased the E1200 router. For some reason, my internet keeps going in and out of service. I will be playing an online game but get disconnected from the server every 6-8 seconds. I tested if it could be my internet provider, but when I connect via Ethernet cord to my modem, it works great. If I run the Ethernet through my router or try wireless connections, it tends to go in and out. It only seems to do this some of the times.
View 1 Replies
ADVERTISEMENT
May 22, 2012
why I am having a slow connection? Before purchasing Linksys E1200 wireless router, my internet speed was perfectly normal with Netgear wireless router. Everything ran smoothly but once I installed Linksys, it began to have slow connection. It also has drop connection sometimes. How do I fix my connection speed and the drop connection?
View 5 Replies
View Related
Dec 11, 2011
We've moved apartments in the same building that provides LAN internet. But in the new apartment the internet is working fine when I plug it in the computer directly, but when I plug it in the router (E1200) it says there's no Internet connection. No WIRED internet and No WIRELESS Internet. I don't get it. The same router I took it back to our original apartment and works fine when I hook up the same ethernet cable to the LAN.
View 3 Replies
View Related
Jul 31, 2012
I recently was able to obtain my son's Nintendo 3DS from him and now I can't figure out how to get on the internet browser with it!When I open up the internet on his 3DS and when I try to access anything it says communication error even though I have a full signal. It also says that the "error code is: 012-1018 Connection to proxy server failed. Please check that your proxy server settings are correct." I have went in and tried to change the proxy server settings and if I do I lose the internet connection despite the fact that the correct information is set in place. I even tried to reset the router (as my son did before) but I can't access it, even though he was able to!! I have done research on the Nintendo web site and everything that it says to do I have done and it shows that I have a full signal but after that no luck.
View 2 Replies
View Related
Apr 15, 2012
I recently purchased an E1200 to replace a broken router. I have had good experiences with this model in the past which is why I bought it. However this has not been so pleasant. For some reason the internet connection over wifi is INCREDIBLY slow. I don't know why. It is fast when connected via ethernet to the router. I changed the MTU on the router to 1400, I set the wireless width to 20MHz and the channel to 11. I set security to WPA2. And yet it is still very very slow. It's not a matter of how many users are on the network; I live in a house with five other people and it's slow regardless of whether everybody's home or nobody is home. It's like this on Macs, PCs, phones and even the Xbox 360. I just did a speed test. Wired was about 14MBps down, wireless was around .7MBps down. I simply cannot comprehend this discrepancy. The old router was very unreliable in terms of connectivity but at least it was always fast. And my laptop is fast at my mom's house where she has an E1200. I use a MacBook Pro from 2009 but like I said,this seems to be affecting everybody in the house regardless of hardware.The modem is a Ubee modem from Comcast. I'd upgrade it to a SURFBoard but my landlord controls all the utilities and I'd rather not have to explain to him how to call Comcast and tell them to register the modem's serial number to the account or whatever.
View 2 Replies
View Related
Feb 27, 2012
I am trying to setup my Internet connection on my linksys E1200 router using static IP settings below -I am getting following error when trying to do this. These are the IP settings provided to me and are configured on my laptop to connect to my ISP as well.
View 6 Replies
View Related
May 1, 2013
I purchased E1200 and have a problem. I have static external IP but router configured to get IP automatically (reservation from ISP). When some one at home using internet I can commetc to the router using remote management. But when everybody out and no internet users at home I cannot connect to the router. I checked with other router from linksys (old one WAG45G or something like this) and it was the same. But it works great whith TP-Link routers.
View 4 Replies
View Related
Jan 20, 2013
I have E1200 router and I have a problem with setup my ISP Connection. The ISP requires PPPOE connection but with static IP Address but in E1200 I didn't find any option for that. The possible ways are PPPOE or Static IP Address.
View 1 Replies
View Related
May 6, 2013
I come back to you as I have a linksys e1200 router connected to a modem Zyxel P600 Series exact and every 24 hours it gives me no or limited connection. Change the IP of the router as it was the same as the modem and subcred mask, why these cuts will be as it is router problem because the modem only works perfect.
View 7 Replies
View Related
Feb 15, 2013
I have an E1200 acting soley as an AP. Everything works just fine, but when I try to copy files from one wired computer(both Windows 7) to another one on the same router(the E1200 in this case), the network utilization is only about 4%. If I take one of the computers off its wired connection and make it wireless, the utilization goes up to about 50%. Also if I take one of the compuyters off this router, and make a wired connection to my main router(which is connected via a wired connection to the E1200), the network utilization goes up to 50%.
View 3 Replies
View Related
Jun 20, 2012
I just installed a new e1200 router last night and my ethernet connection is really slow. I've been reading where people's wireless is really slow, but mine is the opposite. I'm getting around .5 mbps download wired, but around 25 mbps download when its connected wirelessly. Is there anything i can do make the ethernet faster or is the router faulty?
View 8 Replies
View Related
Jan 7, 2013
Trying to set up E1200. I have a DSL connection, no Ethernet connection. I do have internet access. Cannot figure out how to connect.
View 2 Replies
View Related
Feb 3, 2013
Having several issues w my E1200. For quite some time I have had intermittent loss of internet connection. This was somewhat true even before I got a wifi router. & it has continued. Recently it has been even worse & I'm not sure if it is my isp, my cable modem or the router. ISP came out & checked & said signals looked ok, although modem is old.Now i find out that the version of Cisco Connect that i had been using is incompatible w Mountain Lion so it won't work now. & newly downloaded dmg files say they are damaged (or that app has been modified or damaged--I'm not in a position to tell which but same results after I downloaded a 2nd time).
I have been having more frequent loss of internet connection at home. & when I click on the wifi icon to check, it shows it looking for networks. Also it has not been uncommon to see that it has switched to my guest network.Why would it switch to my guest network? What is the difference between the 2 besides the fact that I guess the guest network doesn't have access to everything on my regular network (which right now is only my iPhone, but may get wireless printer).Also when it shows the lists of networks that it "sees" my guest network does not show a padlock icon so what does that mean? It does have the default password.
Also because I had no idea that Cisco Connect was not compatible w Mountain Lion I didn't even think to check for upgrades before I upgraded to Mountain Lion & now I can't open Cisco Connect. Shows unsupoprted OS. & I'm also stalled trying to update the firmware for the router.I'm really beginning to see why it was cheaper than an Apple Airport Express. Even at a very low hourly rate, the lost time spent when this has not been working right has not been worth what I saved on the purchase price.
View 4 Replies
View Related
Jul 29, 2012
since last nite my router E1200 has been having speed up and down problems.first it goes to 150mb/s then back down to 1 for a few minutes, usualy its stuck at 72mb/s which is a far cry from its rated 300mbps but qi'd rahter have that than 1-2mbps.i'd be happy with 150mbps but that only lasts 5mins then goes down to 1-2mbps and i have to reset my connection.
View 9 Replies
View Related
Jul 24, 2012
I just set up my new e1200 wireless router. The wireless connection works great but on my desktop (which is plugged in through the ethernet), has a painfully slow connection. Half the time it times out while loading a website!
View 3 Replies
View Related
Jan 17, 2013
I have a linksys e1200 wireless router and the internet port does work. Is there a way to make one of the lan ports the internet ports?
View 1 Replies
View Related
Jan 3, 2013
I wish to have a home network using the E1200 without an internet connection. I have a netbook (Lenovo S100) and a Samsung Galaxy Note II. I want to be able to have both connected to the router so I can interface the two devices using a program such as Teamviewer.
View 1 Replies
View Related
Oct 26, 2012
I have E1200 wireless router and it was working nicely for the whole last year with 2 mac laptops hooked up on it. About 2 months ago there were 1 mac,1 win laptop and a network printer. And again, it was working just fine at the beginning. I'm not sure when exactly it happened first, but now after working couple of hours internet gets off and router stops responding. If I try to reconnect to it from my laptop I just see an error message saying something about "Connection timeout". Also I don't know does it have something to do with the network printer, btw it's connected to the router via ethernet cable not wireless. Anyway, the only solution I've found so far is power off the router for a couple of secs and power it on again, which is obviously not a solution at all, it's annoying and not practical. The time it works fine before it dies is also not fixed, it might be even 10 hrs of working and sometimes only 1-2 hrs. My other suspicion is firmware. I upgraded it almost at the same time when new laptop and printer showed up. Maybe I have to downgrade it, but I couldn't find older version of it. It was HW v. 1, SW v.1.0.00, and now it's HW v.1, SW v.1.0.03.
View 1 Replies
View Related
Aug 12, 2012
I just bough Linksys E1200, downloaded setup software, ran it, all setup went fine, no errors, but at the end I got the screen saying that can establish internet connection.The steps are totally simple. Did exactly as instructed.'Modem, connected to a PC directly give internet no problem.Modem, connected to the router, and router connected to PC - no internet.And... It's all wired at this moment, all connected with network cable.
View 9 Replies
View Related
Jan 16, 2013
I received the Linksys E1200 today and I installed it according to the instructions but at the end of the installation it showed the message "No internet connection." I restarted the router + modem but that didn't work at all
View 4 Replies
View Related
Sep 5, 2012
I have E1200 router and a Motorola cable modem. I can access the router and internet with a wired connection but when I unplug the ethernet cable I no longer have internet access. I can connect to the router. I have another computer and xbox that are running wireless with full internet access.no problem.
View 3 Replies
View Related
Apr 6, 2012
I can connect to the wireless network, but cannot connect to the internet. The guest can connect but not the main user.E1200..Win7SP1.
View 1 Replies
View Related
May 14, 2012
Linksys E1200. I cannot connect to the Internet through my primary connection, but I can still connect through the guest connection. I think I know what happened, but I don’t know how to fix it. A connect / disconnect key on my keyboard is located right next to the mute sound key. I wanted to mute my sound, and when it didn’t mute I pressed the key a couple more times before I realized I was pressing the wrong key. So I’m guessing I probably messed up some settings. But I don’t know if on the computer, router, or both. Per the documentation I thought I might be able to fix it with Cisco Connect, but it wasn’t installed on my computer. There were only 3 Cisco modules installed.. EAP-FAST module, LEAP module, and PEAP module. I managed to find Cisco Connect on the website and downloaded it, but still couldn’t fix the problem.
View 2 Replies
View Related
May 28, 2012
I have an E1200 and am time out and packet loss issues. The internet connection is fine for 30 seconds to five minuets and then everything times out for 15-20 seconds. Although it’s only a minor incontinence to web browsing, it makes playing games and watching videos a nightmare. “Lost connection to server error.” and the like…
I upgraded to a new router, the e1200 I am currently using, from my Tenda 10/100 N. The problems where the same that I am experience currently and the reason I bought it in the firs place.When I directly connect to the cable modem, I have no issues and everything is fine.I have run a trace route and the second hop, (the router to the modem) is the choke point.I have cloned the MAC address.I have updated the firmware and hard reset
I have throttled my MTU to automatic, 1500, and 1472. None making any difference.I have disabled NAT and all that does is kill my internet connection.I have disabled all firewalls router and windows, no change.I replaced the physical wire from the router to the modem.I have disconnected all devices except one computer, and no difference.I ran a DNS trace and I have… non routable local internet address 192.168.1.1 DNS-cac-lb-01.rr.com and DNS-cac-lb-02.rr.com.I am using windows 7 and my ISP is time Warner so-cal.
View 8 Replies
View Related
Dec 25, 2012
I currently have a Linksys E1200 router and I am getting anywhere from .3-.5 of a megabit per second download speed while upload speed ranges from 2-5 Mbps. This is very strange to me as I have never seen a connection this slow or one that had a higher upload speed than download speed.
View 7 Replies
View Related
Sep 10, 2011
Okay so my friend recently bought a Linksys E1200 Wireless-N Router. We set it up the other day and it all appears to be functioning just fine. The only problem is when we log into her wifi it says "No Internet Access". I'm moderately okay when it comes to computers but not expert and I'm horrible at the whole wifi router thing. Through my laptop I've done a Windows Network Diagnostic to see what was wrong and it says that my "computer is correctly configured but the device or resource (DNS server) is not responding."
View 8 Replies
View Related
Sep 15, 2012
I just upgraded my router from an old wireless54G to an E1200.The wireless device I have on my Sony Viao PCG GRT-240G laptop is LAN-Express AS IEEE 802.11g miniPCI Adapter
-Initially I couldn't connect at all with this machine (however the other two newer laptops could) so I contacted the Linksys tech and he advised I should upgrade my laptop driver
-After much research about this I found a common fix was to upgraded drivers from the 2004 sony driver to atheros_wifi_9.2.0.480 drivers.
-After I did the upgrade I can connect to the router on the guest account and use the internet
However, on the Main account I can connect to the router but I have no internet connectionGoogle chrome gives error belowThe server at [url]... can't be found, because the DNS lookup failed. DNS is the network service that translates a website's name to its Internet address. This error is most often caused by having no connection to the Internet or a misconfigured network. It can also be caused by an unresponsive DNS server or a firewall preventing Google Chrome from accessing the network.How can I use one part of the network but not the other part? Shouldn't both the guest & main accounts use DNS lookup?
View 2 Replies
View Related
Dec 2, 2012
I purchased the E1200 Linksys Wireless Router on 11/26/12. The router worked fine until today. Without reason, the router stopped reading the internet cable/the port on the router stopped detecting the signal from the cable connected to the modem. I can plug the cable from the modem directly into a laptop and the laptop picks up the signal (using it to write this). I swapped out several DSL cables to confirm it wasn't a cable issue and it does not make a difference. I tried rebooting the router, resetting the router, and yet nothing works.
View 4 Replies
View Related
Nov 24, 2012
I would like to wirelessly connect my printer through the new router without internet. The setup CD won't allow me to install without an internet connection.
View 2 Replies
View Related
Jan 14, 2013
I basically plugged it into my Verizon Fios router and downloaded the Cisco Connect application (since I have a macbook air which has no CD drive)
It sets up fine, I change my router name.... BUT at the end it says there is an issue of some sort. The Cisco Connect application reloads saying "repairing connection" but then does not repair it.
Not sure where to go from here. I also logged in to 192.168.1.1 but of course I do not know where to go from here. I also reset the router trying to start from new, but no dice.
View 9 Replies
View Related
Jan 18, 2013
Just set upa new e1200 on my brand new primary PC - connects flawlessly. One other PC in the house and an iphone also connect on the network to the internet with no issues. The problem: My laptop connects to the secure network without prompting for a password,but then does not connect to the internet at all. This same laptop easily connects to the internet via the network as a guest, just as it should. Tried using Easkey, but same result: laptop connects OK to the secure network without a password prompt, but then does not connect to the net.
View 5 Replies
View Related
Sep 19, 2011
I have a question about the function of an E1200 relative to a WRT54G. We currently have the 54G plugged into our LAN, the Ethernet cable plugged into one of the Ethernet ports, not the Internet port, on the back. It is giving wireless clients IP addresses according to our main LAN DHCP, as if they were hard-wired which is correct. Bad thing is, I have no idea what IP address is/was assigned to the 54G itself as it was not logged when done, way before my time. I cannot log into it and take a look at its settings and attempt to mimic what is going on in there on something like an E1200.
Therin lies my next questions. What could be occurring on the 54G that is enabling it to dish out like a WAP and does the E1200 support WAP function? If not, which models do that can be added to the 54G?
View 8 Replies
View Related
Mar 28, 2013
I have a Cisco E1200, I am wanting it to connect to the net using Etisalat ISP. The computer will talk to the router and all the settings look correct but it will not connect to the internet.The router did a software upgrade that it deemed successful.
View 9 Replies
View Related
