Internet Sharing Between Wired Connection And Wireless Router?
May 26, 2011
I have 3 computers running Windows-7. One computer is directly attached with wired connection to broadband internet modem and other 2 computers are attached through a Wireless router attached to modem. The problem is this that both wireless computers are running internet well while the directly connected computer shows internet connection but no data flow happens. When the Wireless router is turned off the directly connected computer starts working internet.
View 2 Replies
ADVERTISEMENT
Dec 27, 2011
I am looking to get a wireless card to share my wired desktop connection for my tablet, laptop and phone and xbox 360 slim. A wireless router would seem the obvious solution but the accommodation I have at uni charges £15.00 just to allow a router to be used.
View 1 Replies
View Related
Jul 3, 2011
I want to share my wireless connection witch is coming from distant internet provider, to my desktop computer with wireless adapter. I have tplink wireless router witch is connected trough wan port to my lan network card also in desktop computer.So is there something wrong with this setting because i can not properly finish wireless router auto configuration wizard, it always return my error.
View 1 Replies
View Related
Jul 1, 2012
We have highspeed internet that comes in at our house, but we want internet in our shop. We have a wireless dongle outside of the building and it picks up the signal for the main computer from the main wireless router. Because it is a metal building we cannot get a wireless signal inside the building otherwise. I want to hook a wireless router up to the computer in the shop, share the internet connection, and broadcast the signal throughout the shop so I can use wireless in the shop.
View 1 Replies
View Related
Nov 14, 2011
I'm going to a relative's house, and they only have one computer, running Windows XP, with a wired connection. We're planning on bringing our laptops, and would prefer WiFi. There are no open networks near us we can use. So, is there an application for Windows XP that is painless to install/uninstall that would allow us to create an access point from that computer?
View 1 Replies
View Related
Jan 6, 2012
i ve a problem sharing my wired internet connection.i ve checked the box for internet sharing in my lan properties>sharing.im gettin internet acces for both wired and wireless connections in my host computer.But the other computers which are connected to the wireless network(ad-hoc) are not gettin internet access.
View 11 Replies
View Related
Apr 21, 2012
I saw one post recommending to changing the MTU from 1500 to 1400. That did absolutely nothing. My comcast internet is now slower than 14.4 dial up modem I had 16 years ago. The strange thing is I can sometimes download at over 2 mbps with torrents. It's mainly loading websites where the speed is so bad.
View 9 Replies
View Related
Dec 3, 2012
So I'm trying to set up my computer to act as a virtual router so I can connect another device to the network.I can successfully create the network but it doesn't seem to be sharing my internet. I believe the problem may be that on the sharing tab for the initial internet connection there is no drop down menu like the one below.
View 5 Replies
View Related
Jan 9, 2013
My ISP provides static ip based internet connection. I have setup my D-link DWR-113 router to access internet through it. I have also turned on DHCP in the router. But when I try to access internet using both of my computers simultaneously it doesn't work - none of the computers is able to load a webpage. And when I leave one computer I am able to surf without any problem.
View 6 Replies
View Related
Feb 7, 2012
I live in an area that has no cable or dsl internet available.The only options are basic dial up or wireless internet through one of the cell phone companies.Right now I use verizon with a usb adapter.I have had this since moving here.It gets good speed and I share it witht the other 4 pcs in my house through a 5 port switch using windows xp's ics(internet connection sharing)We mainly use the internet for playing games together online.Recently though i have wanted to upgrade to a wireless network.I feel as if I 'm living in the stone age because everyone else I know is using wireless.Last night I went out and purchased a netgear n750 duel band router(model number wndr4000-100nas) after reading several guides online about how to set it up.It sounded easy enough but after 3 hours I still could not get it working.
Here is what I am trying to do.I want to basically turn the router into a switch by disabling it's routing function and let the pc that has the verizon wireless card be the host and hand out ip addresses to the other pcs.(like it is doing now)Problems I am having
1- keep getting the work offline popup when I click on anything in the router control panal(it say you are not connected to the internet would you like to connect or continue to work offline I hit work offline and it just pops up again when I click something else)
2- I think I found how to change the router's ip address and disable DHCP under lan controls but when I hit save it pops up saying I need to manually change my pc's ip address and it will not save.
I am using winxp32 sp3 and right now 5 gigabit wire lan cards.(though if I get this working I'm going to pick up wireless card for 4 of the pcs.)
View 2 Replies
View Related
Apr 27, 2011
I recently moved my internet provider to Sprint 4g and I am using their USB modem (U600) I have successfully set up Internet Connection Sharing (ICS) between two Windows 7 pc's using an ethernet cable. Would ICS work with a wireless PCI adapter? effectively making my desktop that the modem is plugged into a wireless router.
View 1 Replies
View Related
Jun 22, 2012
I need to share the internet.
View 1 Replies
View Related
Nov 18, 2011
Im using a usb wireless connection to the internet i want to share this connection with other computers connected through both wired and wireless connection on a network. I was able to do this in XP but having problems in Windows 7
View 3 Replies
View Related
Jul 14, 2011
I have a RV082 Linksys router and at the moment it is slowing down my internet connection by a significant amount. With the router, I get about 3 Mbps and with a modem directly connected to my computer I get about 24 Mbps. Before with the router I used to get 15 Mbps, which is understandable because it is connected to 4 computers total. Maybe my setup has something to do with it. I got a cable that is connected to a modem, the modem is connected to the router, from which one port is connected to a computer, and another is used to connect to a Netgear switch, which in turn is connected to 3 more computers.
Everything was fine until I went on a trip and wasn't home for about 2 weeks, and when I came back, this happened. I tried restarting the modem, the router and all to no avail. I also tried to do a factory reset on the router and again got slow speeds.
View 1 Replies
View Related
Aug 23, 2011
I'm able to access the internet through my wireless network on my laptop, but not on the computer I have wired straight to the router. Isn't that weird?
View 2 Replies
View Related
Nov 16, 2011
i cant open my ports because i have a internet connection that first goes to my router and then to my modem.
View 3 Replies
View Related
Nov 14, 2012
I'm owner of Cisco RV082 router and I have a problem with firewall setup.I would like to deny internet access on port 80 (all sites) for group of users, and allow them internet access for one site by HTTPS (443)After applying rules internet connection is really slow.. Users have to wait something like a 30 sec for a website..I descovered that the reason for slow internet connection is DENY rule. After disbling DENY rule everything works fine..Now I have a few rules added to firewall:
Priority:1 Action: Deny Service: HTTP(80) Source interface: LAN Source:10.82.0.51-10.82.0.245 Destination: Any
Priority:2 Action: Allow Service: HTTPS(443) Source interface: LAN Source: 10.82.0.51-10.82.0.245 Destination: 80.64.59.42
What's wrong with those firewall settings?
View 1 Replies
View Related
Jul 30, 2011
I have a BEFSX41 connected to a Motorola SB6120. I changed my plan for a hgih speed, but did not see it.Had a tech out and we found when direct connected to my computer, I get 50 Mbps. When connected through the router, about 9 Mbps. I swapped cables, but still the same.
Is there any way to determine the connection speed on the Internet port? It seems that it only running at 10, when both the router and modem support 100.
View 4 Replies
View Related
Jul 28, 2012
My sister has just purchased a custom built desktop computer that will not connect to the household network. We have various other computers and devices that connect to the router (Thompson Gateway TG782T) without any problems. Just to be sure I've tried reseting the router to factory settings to no avail.
I've tried connecting her computer to the network through the TP-Link Wireless Adpater (TL-WN881ND) that came with her computer AND through a Netgear Wireless USB Adapter (WG111v2). In both situations the network is detected, the network password is requested (and accepted) but the result is always that she has 'limited connectivity', cannot access the internet and cannot detect any shared network drives.
I've tried connecting with an Ethernet cable as well, which her computer does not detect at all ('network cable unplugged').When I try to troubleshoot any of these problems I get a message that says 'The Diagnostics Policy Service is not running'.The guys at the shop where my sister had it built are asking her to bring the computer in with the router becuse they are convinced that the machine is fine, and that the router is at fault. Some Specs for her computer
-------------------
Windows 7 Professional
Service Pack 1
Processor: Intel(R) Core(TM) i-7-3770 CPU @3.40GHz 3.90 GHz
RAM: 16.0 GB[code]....
View 6 Replies
View Related
Sep 8, 2012
want to get internet and video signals from mu log home to my pole barn -- about 150 - 175 feet.
View 4 Replies
View Related
Feb 11, 2011
I have a Compaq Presario V3016US Notebook PC. It has Windows XP Home Edition.So onto the problem. If I plug in the Ethernet cord, or try to connect to the Internet wireless,nothing gets picked up.I went into device manager, as I have seen many of you asking whether there is any "Yellow Exclamation" marks, and I found three under the Network Adapters.
View 14 Replies
View Related
Apr 21, 2011
I'm using a wireless adapter with my xbox because for some unexplainable answer the wired ethernet port quit working, but when my dad uses the internet on his wired pc I get booted off xbox
View 1 Replies
View Related
Apr 11, 2012
I have a WAP54G in my basement shop, wired to our main router upstairs, which is a Linksys BEFSR81. I'm not sure if this is an issue with the WAP or the router.
I only use the laptop computer in the shop every couple of days, but I leave the laptop plugged in and on most of the time. I used to have the power settings such that it didn't power down completely even after a long time. With that setup, if i didn't use the computer for several days, it would find that the connection to the router had died. The wireless link would report that it had a solid connection, but I couldn't connect to anything. Power cycling the WAP always fixed this.
Recently, I decided to save some wear & tear on the laptop drive, and adjusted the power settings to go to standby after a couple of hours. Now, it seems I can't even go one day without losing my connection.
I am running the latest frimware in the WAP, and the router is version 3.1. I can't check the firmware version on the router at the moment, because the web interface is giving me a blank screen. I know from past experience that I will have to power cycle it to get it to talk to me again.
In any event, it seems like the router connection to the WAP is timing out. I set the router "client lease time" up to 10000 a while back when I first had this problem, but that is clearly not doing the trick.
View 3 Replies
View Related
Sep 18, 2012
I have recently had trouble with my wireless D-link WBR-1310 Router. Two days ago everything was working fine, my wireless connection from the router to my macbook was fine and the wired connection to my desktop pc was also fine. I went to bed and when I woke up the next day everything was still ok. About 3 hours after I had first turned on the PC that next day my wired connection started spiking and dropping connection frequently, maybe every 5-10 minutes or so. I play world of warcraft and I also use Mumble VoiP Program and my pings in both are over 800 constantly now making it impossible to stay connected to either program. Sometimes it will drop down to regular numbers (25-50ms, I play on eastern servers as I am in NY) but then rapidly jumps back up into the 1,000's. My wireless connection is still fine though nothing has happened to that, only my wired connection is messing up.
I've tried changing my speed and duplex settings on my onboard NVIDIA nForce 10/100 Mbps Ethernet which is what im using but it hasn't worked. When connecting directly through the modem the problem seems to stop so its definitely the router.
Wireless Router: D-link WBR-1310
Hardware Version: B1
Firmware Version: 2.02
[Code]......
View 2 Replies
View Related
Feb 16, 2011
I setup a D-Link DIR-825, VB1, Firmware V2.00NA about a month ago. We have 3 Macs here at home - 1 brand new iMac, a G4 Powerbook, and an old G4 / 933 Tower. The G4 tower is connected via ethernet. The other two through Wi-Fi. My problem is that I can barely use the internet for even a few minutes on the G4 tower, connected via Ethernet, without losing my connection. I can be in the middle of loading a page or an image, and suddenly it will say "Waiting for xxx.com". Then if I try to go to Google.com or something I will invariably get "Looking up xxx.com". The connection usually returns on it's own, but it can take up to 3 or 5 minutes. When I get this message on the ethernet G4 tower, I will also have lost connection on the wireless Macs. For the first couple of weeks the tower was not connected and we were just using the two wireless Macs, and they were working well. It seems that as soon as I hooked up the G4 tower via ethernet, connections became very flaky and intermittent all of a sudden.All the Macs are configured for DHCP. We have a Time Warner cable modem. The G4 tower had previously been used at my office with it's own dedicated DSL modem / router, and it worked flawlessly for months at a time without dropping a connection. I've tried rebooting the modem, then the router, then turning all the Macs back on, several times. Same result. I just tried loading the new firmware but it didn't work. Said the Gateway was too crowded or something.
View 1 Replies
View Related
Sep 26, 2011
Im planning on implementing a forefront tmg on my server, normally id connect the modem straight into the switch but to make sure all the traffic goes through the software firewall ive connected it through the servers integrated nic.So now ive got lan access to the modem and its webgui but no Internet access the ip of the nic is (192.168.0.11,255.255.255.0,192.168.0.10) and the modem is set to 192.168.0.10But again no Internet access is detected and i cant ping the isp's dns servers.Just so you know where im going with this i plan to use a static route and nat (built into forefront tmg) to forward all wan traffic through the integrated nic. Ive already tried to use PPPOE with the above setup and im able to share the internet over the entire network using routing and remote access in server 2008 but installing forefront on top of this configuration isnt supported as forefront takes over routing and remote access with no demand dial support.
View 3 Replies
View Related
Mar 4, 2012
I'm having problem with windows sharing (file/printer sharing) from Wireless lan client which is connected to AP3500 and WLC 5508 then to Nexus 7010. It's already using ip command, for example \192.168.84.65 WLC os version 7.0.116.0 (using AP groups) Nexus os version 4.2(6) The weird thing is i can connect using windows sharing from wired LAN to wireless user however not vice versa. f
-Wireless lan to wired LAN using windows sharing - failed
-Wired LAN to Wireless lan using windows sharing - success.
I've been analyzing by making sure that all the to end, there would be no firewall within source pc(s) and destination pc(s) and also the ACL inside Nexus. Been dying here to find solution for this, due to the customer is using it for file and printer sharing service.
View 2 Replies
View Related
Jul 15, 2011
I newly installed win 7 in 2 pc's. I had used the internet connection sharing when I had Win xp installed in them before. So I gave the static IP address,192.168.0.1 to the pc with the internet connection, and had the other pc obtained the IP address automatically. File sharing works fine, but somehow the 2nd PC could not be connected to the internet. When I checked its connection details, the Autoconfiguration IPv4 Address was 169.254.224.63. I think this IP address should be something like 192.168.0.xxx, but it's configured to auto, so I can't really do anything right now
View 1 Replies
View Related
Oct 23, 2011
Recently I took a single braodband connection, I want to share that connection to two of my computers with out HUB,
View 1 Replies
View Related
Dec 13, 2011
how to share my pc's internet wireless connection with my macbook pro in order to get the mac online. The pc is an hp wireless laptop, the router/modem is a cisco.do I just connect the macbook through the router.
View 2 Replies
View Related
Nov 12, 2011
i have a "not so fast" DSL connection at home and i need it for work. unfortunately for me, i have 3 siblings, each having their own laptops who abused the bandwidth by downloading stuffs and streaming videos. i have the idea to share them connection by reconfiguring the current network topology (internet--modem--wifi router--my desktop--3 laptops.) to (internet--modem--NIC 1 of my desktop--NIC 2--wifi router--3 laptops.) using windows ICS and bought ANTAMEDIA BANDWIDTH MANAGER in order to prioritize the connection to my Desktop.
View 2 Replies
View Related
Dec 10, 2011
I have been wanting to share the wifi on my laptop with my desktop. However whenever I enable ICS on my wireless connection and then plug in the ethernet cable to my laptop and my desktop, the wireless automatically turns itself off and only the LAN connection between my laptop and desktop is active. I have done a lot of googling and read a lot of forums, but unable to find a way wherein I can let my wifi remain enabled even after plugging in the LAN cable.
View 5 Replies
View Related
Jan 22, 2012
Iam unable to share my internet connection.I am unable to use it on a router even.When i connect it to my laptops Ethernet port its working fine.But when i connect it via router its just showing internet access but i m unable to open any pages.
View 1 Replies
View Related