I keep on getting this error from my adapter I am trying to install. Here is what I copied.
Error description: Invalid key Manual
Model name: AE3000
Operating system: Windows 7 SP 1
Software version: 1.0.0.3
The password I had from my connection is correct. I checked it about 3 times, and it keeps on saying it is wrong? Does this mean I have to reset my router?
I picked up a AE3000 for an older laptop, but it will not connect to any network. It is on an older (01') dell laptop running XP SP3. I have tried using the disk and downloading the latest drivers on-line but no luck. It picks up all the networks around me and mine, but it says trying to connect and just can't. I tried it on another laptop and everything works fine. Is there an issue with this adapter and the original USB ports or XP in general? I have checked and rechecked the passcodes, I have deleted all of the profiles and started from the beginning again. I removed my anti-virus program as well as the last effort. Nothing I do seems to make a difference though.This is just used to access the internet on a laptop that is dedicated to a telescope.
View 4 Replies View RelatedI recently bought the E2500 Router and I am using the EA2500 Adapter with it . I have this set-up on 2 Desktop PC's . 1 Pc is working just fine with this set-up . The other keeps giving me an Error message of "Invalid Key Manual" . What does this mean ? The adapter is working because it does find the Router as a usable connection . It just isn't able to connect to it and keeps giving me the same Error message .
View 8 Replies View RelatedI bought a the AE3000 wireless adapter because I got a new DPC3925 modem/router and its signal is really weak. When I play games, it lags/disconnects for a second or two then resumes. Plus it also screws up my wireless mouse at times. I changed my wireless adapter back to my old high gain G adapter and everything seems fine.
View 1 Replies View RelatedMy adapter AE 3000 can't find my wireless network. Other adapters can.
View 1 Replies View RelatedRecently upgraded home router to Linksys EA3500 and a AE3000 Adapter for my laptop. Laptop is Dell Inspiron 1705 (yeah, it's old) running XP SP3. the adapter's drivers installed properly from the supplied CD as it negotiates and connects with the new router. However, there is NO Linksys Wireless Manager. It appears it was not installed at all. I can find no folder in Program Files named either Cisco or Linksys nor anything new in the Programs list. Is there a Linksys Wireless Manager included on the CD that should have installed?
Can I download it separately and install?I've disabled the built-in Dell wi-fi radio with came with an Intel ProSet wireless manager. Would REALLY like to have a new wireless manager that works well with the new adapter. Am going on vacation tomorrow and will have to deal with new and different access points, hotels, etc.
I have an AE3000 dual band wireless adapter using the Win 7 Pro OS. At work our routers all use the same SSID, but utilize different channels. In terms of signal strength, the strongest signal is usually, but not always, one of the channels on the 2.4GHZ band (usually 11). However, in terms of speed of connection and lack of overcrowding, the best signal is invariably one the channels on the 5GHZ band (usually 161). My AE3000 will inevitably connect to the strongest signal (channel 11) even though it only slightly stronger than the signal on channel 161 and furnishes a much slower connection than that obtainable on channel 161. Is there any way I can "force" the AE3000 to connect via channel 161 rather than channel 11?
View 6 Replies View Relatedjust got my AE3000 today. It's working fine. The box says "2 GHz or 5 GHz" but there are no instructions on how to select one or the other. I don't even know which it is using. How do I set this? I'd like to make sure it's on the 5 GHz band.
View 1 Replies View RelatedWindows 8 on a desktop with Linksys AE3000 wireless adapter. I sometimes start losing packets when pinging to my router. Here is an example:[URL] Now using my tablet with builtin wireless adapter (same location as the desktop) I got this result [URL] the problem is not my router If I restart Windows 8 desktop, the problem is fixed and pings are back to normal. However, next day I get the same problem back (until I restart Windows again).I have tried three different wireless adapters but it's the same problem with all of them.
View 2 Replies View RelatedJust bought this Linksys AE3000 Wireless Adapter. I followed the directions, run Setup on DVD....then plug unit it.Adapter NOT Found!Unit Blinks Blue light every 8 seconds..
Note, that when first plugged in.......Device driver auto downloaded...and said ready for use. I gather through Windows 7
I just purchased 2 AE3000 adapters to update my wireless network and cannot get either of them to connect to my wireless network through either of two computers I tried. It hangs for a while looking for address and then I get the 'limited or no connection' note. But yet when I plug in my old AE1000 adapter into either computer I get connected right away. I've looked under the device manager and it shows up there, the LED lights come on and I see my wireless network show up on available networks. I am using the windows wireless manager in lieu of the Linksys one and as such I don't think any specific drivers are being used. I bought two updated adapters to start with is to keep current and NOT have problems.
XP Pro SP3
WRT350N Router
I have a E2500 router and just got this AE3000 adapter. Thought that would bump up the wireless signal for using my laptop at the other end of the house about 75 feet from the router. The new E2500 Wireless N has been a big improvement. The AE3000 installed perfectly and shows up as working properly. It's just that the signal strength on my laptop shows 2 bars and the signal strength for the adapter shows 2 bars.
View 2 Replies View RelatedI recently purchased a Linksys AE3000 Dual-Band Wireless-N USB Adapter as an upgrade to my Dell Desktop Computer and to compliment the Linksys EA4500 Router that I recently installed. Generally it seems to work well and the 2.4 GHz network status typically shows speed to be 450 Mbps. However, I’ve discovered if the computer goes to sleep based on my power plan, when it comes out of sleep the “Available Networks” will show the network I’m connected to (2.4 GHz network) and a false network identified as “Other Network” with a Red “X” where signal strength would normally be. When I mouse over it; it shows Network Name: Other Network; Signal Strength: Excellent; Security Type: Unsecured; Radio Type: Unknown; and SSID: Other Network.
Initially I thought this was an anomaly caused by having both bands of the Router (2.4 and 5.0 GHz) set to the same SSID, so I changed the 5.0 GHz band to a different SSID and set my Media Players to access the new SSID. However, now when the computer comes out of sleep mode, Available Networks will initially only show the Router’s 2.4 GHz SSID and the phantom “Other Network”. It takes a while before the Router’s 5.0 GHz SSID shows up. We live in the country, so there are no other networks close to us, just my home network. It never shows the “Other Network” when I start or restart the computer and if I disable the adapter and then enable it, the phantom network goes away until the computer goes into and out of sleep mode again. Also, I uninstalled and then reinstalled the Driver and then reinstalled the Adapter using the Cisco Connect Software and the problem still exists. Finally, I disabled the Router’s 5.0 GHz network and the phantom network no longer appears under any conditions. The Dell (Atheros Communications) Wireless Card in the computer doesn’t have this issue under any scenario. On both the AE3000 and Atheros Adapters the 2.4 GHz network shows a signal strength of Excellent (5 out of 5 bars) and the 5 GHz network shows Good (3 out of 5 bars).
How to correct this issue? With the issues I’m having with the EA4500 and the AE3000; they are both probably going back to Amazon.
I purchased the AE3000 Wireless Adapter for my PC, and has been working fine until now. When I first start my PC, my ping starts anywhere between 20-80, then after I try to access anything on the internet it shoots up between 600-1200. It just started happening about 3 days ago, but now it has gotten worse. I can't play any online games, and websites are slow to load.
View 1 Replies View RelatedWhere do I find a manual for the LinksysE1000?
View 1 Replies View RelatedDo you know when will be possible to manual configure ipv6 settings? I have all parameters from my ISP but the settings on the router are only automatic and 6rd. Is it possible to enable this in future firmwares?
View 1 Replies View RelatedI have had several Linksys and Cisco routers in the past, and I'm a network engineer. My E3000 died after only 18 months so I had to run down and buy a new router, thus the EA4500.
I use the manual way to configure all my network gear. Nothing on my network changed, except the router replacement.If I leave the router default address at the 192 range, DHCP will issue a IP address. However, I do not use that range and after cdhanging the range, setting my start IP address, etc, I save everything and even tried rebooting the router to no avail. The router will not issue a DHCP addrss if you change the default range.
I can manually configure my clients with a static IP and all is good, no issues at all. I just can't get DHCP to work. My E3000 was configured exactly the same way and worked just fine, well up until two days ago.I have tried upgrading to the latest router firmware, so I'm not on 2.0.37 and I did set the router back to Factory Defaults, rebooted, then configured it, and still no DCHP.
The device has been trying for days to auto-download and all it does is fail constantly. Saying that my connection is slow - gee, I have FiOS, I know it's not slow,maybe it's your Servers Cisco?Well, where can I obtain the direct DL link to that firmware file instead of relying on an unreliable device to get it and apply for me?
View 4 Replies View RelatedI have a 4200V2 acting as a Router and (2) more E4200V2's acting as Access Points,The E4200V2 acting as the Router is at Firmware 2.0.37, but, the other Access Points are at Firmware 2.0.36.126507 and when I try to have the Firmware Upgrade Utility in Setup update the Firmware it gives me this message:"Current Version: 2.0.36.126507Available Upgrade: Your router software is up to date"Where is the downloadable Firmware 2.0.7 located?How do I upgrade the Firmware Manually to 2.0.7 and should I ?
View 6 Replies View RelatedE4200v2, firmware 2.1.39.145204
Router says "Invalid IP address" when I try to make a manual IP address reservation of the IP address range.
Example: local network 192.168.1.0/24, where .1 is a router, .2 is a reservation, .20-.50 is a range for DHCP.
Before upgrade I didn't have this problem.
I am running a WRT320N with Firmware 1.0.04Trying to Upgrade the Firmware to 1.0.05 it always fails at about 24% progress with a message saying an invalid value has been entered.I downloaded the firmware from your homepage twice so that the file is not corrupted
View 4 Replies View RelatedYour product is stable but not profitable For the price your customers is easier to buy a model Zyxel Correct firmware for the static route, or Dynamic Routing (RIP)LinkSys E1000 Enabled - Dynamic Routing (RIP) NO RESULTS!ZyXEL KEENETIC LITE - automatic routing!
View 9 Replies View RelatedI have a EA2700 and will try to reserve an IP address to a PC, but getting up that address is invalid.I already have two reservations, which is 192.168.10.10 and .... 50, I try to reserve ...... 20 but am getting alert that this then is "Invaldi IP".
View 9 Replies View Relatedim triyng to forward a port but when i click save settings it give me a message: "Entry 10: Invalid IP Address".
View 9 Replies View RelatedI have WRT54G2 that I've set up my wireless network on. My Kindle, just the basic one, sees and recognizes the network. It has good signal from it. When I attempt to sign in though the Kindle says my password is invalid or it says it just can not connect. I have gone over and checked what I hope are all the settings but to no avail.
View 1 Replies View RelatedI'm trying to setting up a Linksys AM200 in routing mode, with static ip (WAN), but when I insert 2.113.120.209/30 ip and subnet, a popup show up and sais that the ip si not valid. The same happend when i put the address in local side.
I put the same configuration over another different device and everything goes fine.
I reset the configuration of the AM200 from the factory defaults
I am looking for Prolink H5305g manual in PDF.
View 1 Replies View RelatedWhere can I download the user manaul for this switch, not the quick start guide?
View 1 Replies View RelatedI need some manual about how to use AIR-ACCRMK1300=.Is there any offical manual?
View 4 Replies View RelatedI have a RealTek 8187 USB wireless adapter on my desktop computer that has an associated utility that allows me to manually select which of several competing WAP's to connect to. But that is good only for that particular adapter. My laptop has a different make of adapter that does not have this capability and many of my friends and neighbors lack the capability also. I have a situation where when I turn on my desktop, it automatically connects to a certain WAP, presumably because it has the strongest signal. However, at certain times of the day, traffic or other unknown interference blocks internet access for varying periods of time. I can usually go to my RealTek utility and switch connections to another WAP that has somewhat less signal strength (for example from Channel 1 to Channel 9 -- all within the same Wi-Fi network). Almost always I can restore internet access by doing this.is there generic software available that allows manually selecting WAP channels regardless of the particular brand of wireless adapter being used. Or is there some setting in either Windows XP or Windows 7 that would allow selectively choosing to connect to one channel of a network rather than another even if the signal strength is less.
View 5 Replies View Relatedmaking Windows 7 do what it's supposed to? Seriously, there needs to be a button you can click to roll it completely back to XP.
View 1 Replies View RelatedWhen I get to the screen that asks for the the security password, and after typing in password then at the bottom their is a button for Back and one for Cancel. The button in the middle for Next is not highlited or clickable.
View 2 Replies View RelatedHow to install model WUSB54GSC.
View 5 Replies View Related