Linksys Wireless Router :: E1000 Changing Internet Service Provider

Sep 3, 2010

If I have a wireless network set up with the Linksys E1000 using one internet provider and then change the internet provider service to someone else, do I have to reset up the network or is it simply a matter of connecting the new internet service to the router?

View 3 Replies


Linksys Wireless Router :: WRT54G V7 - Cannot Specify Service Provider

Mar 14, 2007

WRT54G v7 - cannot specify service provider

View 9 Replies View Related

Linksys Wireless Router :: Dynamic DNS Service Applying In E1000

May 2, 2012

I have applied for a dynamic dns service,  but need applying in linksys E1000 settings 

View 3 Replies View Related

Linksys Wireless Router :: E1000 - Can't Access Router Settings After Changing To Static IP

Jun 26, 2012

I installed an IP camera, and had to change my E1000 router settings to a static IP address.  Now I can't access the router settings. is still the default gateway, but it won't open in any browser.
I'm reluctant to do a reset because it took me quite a while to figure out how to get the IP camera and port forwarding working (it does!), and I'd hate to do it all again and come to the same place.  I'm not very good at this stuff, and it's a small miracle that I did it once.  

View 4 Replies View Related

Linksys Wireless Router :: E1000 Poor Cell Phone Service

Aug 5, 2011

I bought a new linksys E1000, I have poor  mobile service, calls dropping, I wanted to know how to have better service with my Router? what steps do i have to take? also we have straight talk phones, samsungs, I bought it thinkng we would get better service.

View 1 Replies View Related

Switching Internet Service Provider On ISA

Sep 10, 2012

I have Windows 2008 server running isa server with dedicated ip (which I take from my Internet Service Provider ISP) running my website, if my internet connection is down my website is not accessible from outside world.How can I switch to another ISP using same dedicated ip address when my ISP connection is down?

View 1 Replies View Related

Protocols / Routing :: Who Is Your Internet Service Provider

Sep 4, 2012

Is this a wired or wireless connection issue? Both Who is your Internet Service Provider (ISP)? Comcast..What type of Broadband connection are you using? Cable..What is the exact Make and Model of your Modem, Router or Modem/Router Combo - (Main)Netgear WNR3700v2 / WNR2000v3(secondary) My current setup is the 3700 router is taking the internet from the modem cat5e and spewing the wireless. I would like to have the secondary router use the wireless from router 1 as the internet source and push the internet out of the 4 hardline ports so I can plug my upstairs xbox 360 into the router via cat5e. I'm just kinda new to this and still learning so I'm not sure how to configure the router to do this. I can get into the settings of the router just fine but finding the right settings to tweak is a little difficult.

View 3 Replies View Related

Broadband :: Internet Service Provider Doesn't Have Wifi

Nov 4, 2012

I have a wired broadband connection with a modem. My internet service provider does not have Wi-Fi. Can I convert it myself into wi-fi by connecting it to a router. If possible how?

View 6 Replies View Related

One Of Two Laptops Unable To Connect To Wireless After Changing Provider?

Feb 21, 2013

We recently switched from cable internet to Verizon DSL since my roommate moved out and took his equipment with him. I set up the wireless router last week and got my laptop to work on the wireless connection. Now I am unable to get my boyfriend's computer to connect to it, when it never had this issue before with the previous wireless. The first day I had it set up, it said it connected, with an "excellent" connection strength, but then the status was 'unable to connect.' I was on the phone with the Verizon guy, who after doing a screen share, said it was my IP address.

So I tried resetting my IP through the CMD, with no luck. Now it doesn't even let me connect to the wireless at all. I've tried both the Intel PROSet/Wireless and the Microsoft client to connect (this is running Windows XP) and when I click 'repair' on the Microsoft client, it tells me it couldn't be corrected because it could not renew the IP address. The firewall is currently off and I removed the defunct McAfee that was never renewed anyway[CODE]

View 13 Replies View Related

TP-Link 3G/3.75G Router :: TL-MR3420 / Setup Info For Service Provider?

Mar 15, 2013

Region : Austria
Model : TL-MR3420
Hardware Version : V1
Firmware Version :

When I first installed the router I used the built-in provider settings for "ONE" which used to be the name of the provider before it was taken over by It seemed to work fine but I experienced some funny server errors with certain web services. I contacted about this and they told me to adjust the provider settings in the router as follows:

Dial number: *99#
APN: fullspeed

The reason for the problems was that they use different proxy servers for their services and applications. Now it works fine (so far).

View 1 Replies View Related

Cisco :: Service Provider Blocking VPN?

Feb 5, 2013

"The service provider in your current location is restricting access to the InternetYou need to log on with the service provider before you can establish a VPN session. You can try this by visiting any website with your browser."We are using an Internal IP....and the external, same resultI am the IT Admin and this was working last week till I upgraded to the newer anyconnect. Internet is just fine....I am at a loss.

View 7 Replies View Related

Computer Looking For Wrong Service Provider

Feb 25, 2012

My folks have Time Warner (Roadrunner) Internet service. They power-down their Dell every night. When they shut down last night they had no problems and were running Time Warner (Roadrunner). When they booted the computer this morning the computer is trying to connect to Adelphia.

They changed nothing. The wiring to the computer was not compromised in any way.

Time Warner tried to "ping" their modem and could not "see" the modem. They think it is a line problem - but the fact that the computer is looking to connect to an alternate service provider makes me think that it is possibly a problem with a setting in the computer.

View 1 Replies View Related

WNDR3400v2 - Add A Different Dynamic DNS Service Provider?

Jul 22, 2012

I have DNS setup through How do I add this service provider to my WNDR3400v2 router? It only has listed and I can't create a free account there.

View 1 Replies View Related

TZ-210 - Configuring Static IPs From Two Different Service Provider

Mar 27, 2012

how to separate two different static Ip address provided by different service provider in Sonic wall TZ-210

View 6 Replies View Related

Cisco :: 3600 Connection With Service Provider

Jul 9, 2012

I have currently a Cisco 3600 router, it has three interfaces (all ethernet interfaces only).We being a client, our requirement is, we want two links one being the primary and one secondary for the fail over.My ISP has done certain configurations, but I am so puzzled what really has been done. I asked with them and they told that they have provided us one public IP via Fibre--> Media Converter-->Ethernet 0/0.At the same time, they have given us a pool of addresses of the network through the interface Ethernet 2/1.And we have used all the available public IPs in the server farm.They have told that, for the failover purpose via wireless, they have even used an IP address
Now, where my confusion lies is, cant they provide the pool address via fibre? What is the significance of the ip that has been provided via fibre? What actually is its purpose? Isn't it consuming an extra interface ?Cant we have both the primary and secondary link excluding that one additional process?Or, am not understanding the real working mechanism how ISP distribute the internet?

View 1 Replies View Related

Cisco WAN :: 1841 Can't Able To Use Different Service Provider At Same Time

Mar 4, 2012

I have cisco 1841 router in my office.In that router we configured MPLS bgp with two different service provider. [code] We can't able to use the different service provider at the sametime.Cisco 1841 is support two different AS ???

View 12 Replies View Related

Couldn't Establish Connection With Server Of Service Provider

Aug 28, 2012

My modem with single network connectivity (Type I) works fine. I tried to replace with Type II modem (with wifi- and 4 or more ports) for connectivity. I could not establish connection with the server of the service provider. I tried to replace with a different type of typeII modem. Still the same. What could be the reason?I connected the same in a different workplace to a different PC.

View 1 Replies View Related

Cisco VPN :: Configure L2L VPN Tunnel To Service Provider Using ASA 5505

Jun 3, 2012

I am trying to confgure a L2L VPN tunnel to a service provider using an ASA 5505.My problem is that the service provider will not accept traffic from a LAN subnet, they will only accept traffice from a public IP.We have a small public subnet of x.x.x.50/, our public IP (outside interface IP on the ASA 5505) is x.x.x.50 and the service provider wants to see traffic coming from us on x.x.x.51How can I NAT our LAN subnet ( to one public IP (x.x.x.51)?

View 14 Replies View Related

Cisco :: Configure Load Balancing In MPLS Between Two Different Service Provider?

Dec 19, 2012

How to configure load balancing in MPLS between two different service provider.

View 4 Replies View Related

Linksys Wireless Router :: E1000 Only Local - No Internet?

Jun 30, 2011

my brand new Linksys E1000 wireless router. I am really struggling and cannot figure out what I am doing wrong.
I live in The Netherlands, have a modem (DSL I think...) and can connect wired through the modem with no problems.
I installed the E1000 with the CD, followed all the steps and my laptop is finding the network. However, it's only local, no internet and I don't understand why. Have tried to connect (wired) my computer to the E1000 and the E1000 to the modem but that doesn't work either.

View 2 Replies View Related

Linksys Wireless Router :: E1000 Cannot Connect To Internet

Aug 3, 2011

Just got the new Linksys E1000, and follow the Cisco Connect to setup. No IP received from the service provider (which is Fibre-to-the-building, no modem is required).  Goto the setup page and confirmed that the connection type is "DHCP".Once i unplug the cable from E1000 (internet port) and plug into my old wireless router, everything work nicely.  The internet connection & cable itself seems fine. Switch the cable into notebook, and get the IP as well, it seems the service provider didn't lock the mac address of the devices (routuer nor PC). Cloned the mac address but nothing improved.Tried release the IP before unplug from the old router, switch off old router, and wait 10mins before connected to E1000 but still no luck.

View 2 Replies View Related

Linksys Wireless Router :: Cannot Connect To The Internet With E1000

May 28, 2012

cannot conect to the internet with my e1000 wirele

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Can't Reconnect To Internet

Oct 19, 2012

Every two or three days I'm unable to reconnect to my wifi network when I turn on my Windows 7 laptop or Android tablet. I have to power cycle the wifi router to get the connection again. This usually happens after I haven't used either device for a day or two. The connection usually does not drop when I'm using them. Restarting the computer or the tablet does not work and using the Windows troubleshooter (or the android app for wifi issues on the tablet) also doesn't work. Both computer and tablet recognize the network and say the signal is strong but won’t connect to it. There are no physical obstructions. I have no problem with my internet connection (cable modem). The problem really seems to be with the wifi router.

Model name: Linksys E1000
Model number: E1000
Firmware version: 2.1.02 build 5
Operating system: Windows 7 SP 1
Software version: 1.3.11069.2
Connection type (WAN): DHCP

View 2 Replies View Related

Cisco Switching/Routing :: 2600 DHCP From Service Provider Not Working

Feb 7, 2013

So I have  a 2600 that I have configured three sub interfaces on. FA0.0.1 is set for DHCP and supports VLAN 1. FA 0/0.2 for Voice, FA 0/0.3 for Data. I have this router interface plugged into FA 0/24 on my 3550 and the 3550 is configured as a dot1Q trunk (I have attached configs for RTR and SW).I have most ports configured as access VLAN 1 which is where i have my ISP connection plugged FA0/1 on the 3550. When I connect the service provider link FA0/0.1 never picks up an address. If I take my internal DHCP server and connect it to FA0/1 of the 3550 it snags an address almost immediately.In my mind this validates that my config is fine. I also took the same cable from the service provider cable modem and connected it to my laptop and the laptop is pulling DHCP.

View 4 Replies View Related

Linksys Wireless Router :: E1000 Connected To DSL / No Internet Access

Apr 10, 2012

I have a Linksys E1000 device that is connected to a DSL connection through a modem. I have a Laptop that is wirelessly connected to the router and a PC that is connected via cable. Lately, a problem started to occur where the router keeps losing the internet connection and Laptop tell me that it connected to the router but there in no internet access and the same thing happens to the PC, both disconnect at the same time. I called my ISP company when this happens and they told me that the connection is working fine and everything look ok from there. I connected my PC directly to the modem and it worked fine so problem is not from modem. When i go to the router settings at the moment this occurs, it shows that all IPs are 00000 and status is "Connecting" and then it connects and changes to "connected" and everything fine till like 15 minutes later where this happens again (sometimes, it actually disconnects again after like 15 seconds!). I took the router to the dealer and he examined it and told me there is nothing wrong but he updated the firmware and told me to try it but same thing so he exchanged it for a new one and problem is still there!

View 3 Replies View Related

Linksys Wireless Router :: Reset E1000 Now Can't Access Internet

Dec 19, 2012

I got a refurbished E1000, has been great.
Using it w/ my HP laptop since July, just got Mac book and was trying to use w/ that addition laptop but could not find router password, also 192.168.11 would not let me access w/ password: admin, so I reset the router and renamed it.  NOW my HP laptop shows my router connected, BUT will not access internet.  

View 3 Replies View Related

Linksys Wireless Router :: E1000 Slows Internet (10 Mbps)

Jul 13, 2011

Why my internet was so slow .90mbps. They got on my mac and changed the Ethernet setting to "manually" instead of "Automatic", then changed the speed to 10mbps instead of "autoselect". Now the internet is going at the 10mbps im supposed to be getting, but when i plug it into my router (wall>router>laptop) i get the .90mbps again. So do i how do i change the same setting on the router?

View 1 Replies View Related

Linksys Wireless Router :: E1000 - Unable To Get Internet Access

Sep 12, 2012

I've got a v1 E1000. Lately when I turn on one of my computers, or attempt to connect with my Motorola Xoom tablet it will show connected but I will not have internet access. Initially it will show that I have internet access but not work, then after about 1-2 minutes my PCs will show "No Internet access" for about 2-3 minutes, then it will show "Internet Acess" again and still not load. After that, in about 1-3 minutes the internet will start working and work as good as ever until I disconnect (manually or by turning off my computer) then connect again; the process described avove happens again.

View 2 Replies View Related

Linksys Wireless Router :: Cisco E1000 Won't Connect To Internet?

Sep 3, 2011

I recently bought a new router but I'm having issues with it. We have 2 Laptops in our house and 1 (windows 7) can connect to the router and get internet access but the other (windows vista) can't it says that the Cisco router is not connected to the internet but it is. I've tried everything, resetting, reprogramming, etc. I recently found that the windows 7 one had the software installed and the windows vista didn't. What I need is to get that software but I need to know which version to get. How do I know which version of the software goes with my computer?

View 1 Replies View Related

Linksys Wireless Router :: Internet Access Kicks Off On E1000

Feb 10, 2012

I have an ADSL modem connected to a Cisco E-1000 router. I have two laptops (Windows Vista and 7), an iPad and two smart phones. The iPad and the phones connect without any problems at all and stay connected without interuption. But the two laptops keep losing internet access! They stay connected 10-15 minutes, then invariably lose internet access. I have to manually disconnect and reconnect again to get back on the net - but again, only for 10-15 minutes.
I've tried many things - changing the channel, playing with all sorts of parameters (as suggested by the online chat guy) - but to no avail. 

View 3 Replies View Related

Linksys Wireless Router :: E1000 - Internet Speed (max Out At 144mbps)

Aug 13, 2011

I have a Cisco E1000 v2. I updated to the latest Firmware 05/25/2011Ver.2.1.02 (Build 5).

Before doing this update I did get 300mbps N speeds. Now I don’t using the same settings, it max out at 144mbps speed. Also the router only seems to get B speeds when using a channel other than 11. I did do a hard reset after the firmware update.

View 1 Replies View Related

Linksys Wireless Router :: E3000 - Connecting To Internet Service

Jan 12, 2012

I purchased a refurbed? router on the internet, not supported any longer by Cisco Chat. I have a wireless internet: WiMax thru Clear wireless.  I have a Linksys voip box coming off it for my phones.  I installed the disk that came with the router, followed the directions, and got a message that Internet could not be found.  Went to the live chat and followed some advice that did not work, conflict with voip?  bypassed the voip and ran a cable from the wireless modem to my E3000.

View 3 Replies View Related

Cisco WAN :: ME3400 / Injecting Two Default Routes Via Ospf Into Service Provider MPLS?

Jan 24, 2011

We have multiple sites that are linked via MPLS (L3) circuits. We have good size circuits for Internet at two main sites (HQ and QC) and smaller sites come to HQ site to go to internet. We are running ospf (Cisco L3 switches) with service provider (ME3400) at these two main sites and service provider then redistributes routes back into MPLS via BGP and then smaller sites ME3400 learn these routes. i am injecting default routes from HQ and QC, but Telco is only redistributing default from HQ. So large pipe Internet at QC is not being used effeciently. Also if MPLS at HQ fails, then we are told, we need to call Telco and they will make change in their network to now start distributing default from was my understanding that telco can use BGP communities and advertize one default as prefered and second with higher cost, so that failover can occur automatically. And that they can also set up so that west cost sites use HQ and east cost sites can use QC for going to internet, but they say it is not the least, can I do something like this at my end for failover for internet, in case MPLS at HQ goes down (soon we will be setting up a point to point VPN tunnel between HQ and QC so that MPLS failure at HQ will trigger advertisement of HQ routes over tunnel via QC into MPLS, so other sites can then come to HQ thru QC over this tunnel. At QC Cisco router (to detect loss of default route from HQ and then start advertizing default from QC) 
router ospf 1
 default-information originate always route-map From_HQ
 ip access-list standard From_HQ


View 3 Replies View Related

Copyrights 2005-15, All rights reserved