I bought a new linksys E1000, I have poor mobile service, calls dropping, I wanted to know how to have better service with my Router? what steps do i have to take? also we have straight talk phones, samsungs, I bought it thinkng we would get better service.
View 1 RepliesI'm having an issue with my work laptop. I'm just setting up a wireless connection for the first time. I bought the Linksys E1000. I have used this laptop at work and at hotels for a 54 MbPS connection. I set up the Linksys at home. It sees the network and will tell me that it is connection at 54 MbPS. Then it quickly goes down to 11 then 5.5 then 2. Eventually it runs so slow that I time out of the security portal at work because its so slow. Occasionally it even loses the network and has to find it again. I'm only about 20 feet away from where the router is located. I have hung up all cordless phones and turned off my cell phone.
View 2 Replies View RelatedWhen I try to connect to my Motorola Droid 2 cell phone--using my home network--it just cycles between "obtaining IP address" and "remembered.secured with WEP", then back to "obtaining IP address", etc.I have connected in the past with no problem, so it had the password in the phone, but I followed the troubleshooting advice at the Droid 2 site and "forgot" that contact, and reconnected, reinputting the password. Still the same thing.
View 2 Replies View RelatedI have applied for a dynamic dns service, but need applying in linksys E1000 settings
View 3 Replies View RelatedI have a router attached to my Dell desktop running Windows 7 and am trying to install the AE2500. Instead of using the router, I want the AE-2500 to access my HotSpot wifi on my cell phone. I go through the AE2500 installation and Device Manager shows it is installed properly. However, I do not see the adapter in my list of available wireless connections and I'm unabley to disconnect my router connection. I keep clicking disconnect but it never does.
View 1 Replies View RelatedIf I have a wireless network set up with the Linksys E1000 using one internet provider and then change the internet provider service to someone else, do I have to reset up the network or is it simply a matter of connecting the new internet service to the router?
View 3 Replies View Relatedi have desk top computer hooked up wieless can i use router to povide to cell service and if so how
View 1 Replies View RelatedI currently have a home wireless network set using a router provided by the phOne company. I am considering canceling my wireless Internet through the phone company and use a cell phone data plan for all my wireless by using cell phone as a personal hotspot. Is there a method to use my wireless printer (hp 4360) to print through the personal hotspot?
View 1 Replies View RelatedAny way to simply have someone phone my computer such that they're on a cell and I'm on my mic? It seems like such a simple thing for this day and age, but my attempt at a Google search is resulting in things that aren't exactly what I mean, such as where I can phone them first, but would have to incur charges, as if I'm using a cell myself instead of a mic. Any way, a site, or a software, to make such a setup work? To be clear, someone using a cell phone--not a mic and not a computer--would somehow "phone" my computer/a software I have, and I would hear them through the speakers as usual and communicate by my PC mic--not a phone and not a cell.
View 2 Replies View RelatedI have a CME that has a FXO card, I can call the CME's number from an on-site phone and it works just fine, but when I try from my cell phone it picks up but doesn't give the dial-tone like it's suppose to, but if I hook an analog line to the phone line I can call that no problem from my cell?
voice-port 0/0/0
supervisory disconnect dualtone mid-call
secondary dialtone
timeouts call-disconnect 2
timeouts ringing 30
timeouts wait-release 2
timing hookflash-out 500
caller-id enable
dial-peer voice 201 pots destination-pattern 9T port 0/0/0 and I can see it pick up.
I was under the impression that an FXO card didn't have any clue about inside/outside etc, all it knew was that it was getting a signal to ring.
I would like to connect to the internet on my home wireless network using my cell phone - allowing me to drop my cell phone internet service charges. I'd keep the cell phone agreement for placing and receiving calls, but be able to connect to the internet at home using the home wireless network.
View 2 Replies View RelatedI had cell phone which is not working but i want to use those camera as a hidden cameras can u show me the connection how to connect those cameras.
View 1 Replies View RelatedI can't get internet threw the wifi on my cellphone. My phone finds my network and it says I am connected but when I try to use the browser it says it can't find server. All my other computers and laptops connect and work with no problems. I installed the latest firmware for my dir-615 and still not working. I took off the security and did not work. I tried both wpa and wpa2 settings and still not working
View 7 Replies View RelatedWe live in an area with no Internet available. We are currently using a Motorola Bionic cell phone thru Verizon as a personal hotspot for our Internet. We get fair to good 4G coverage but the wifi signal does not make it out of the room the phone is in. Is there a way to increase the range of the personal hotspot signal
View 1 Replies View Relatedi have photos on my ipad that i want to send to my son cell phone in north carolina. can this be done?
View 1 Replies View RelatedI am using the HTC One S and a Linksys WRT54GL router and I find that I become out of range once I leave the room with the router. I am wondering if there is some sort of setting that I need to change on the HTC One S or Linksys WRT54GL to make the signal stronger?
My brother owns a Moto Razr, dad has HTC Desire C, friends have iPhone, S3, Nexus 3... all do not have any problems with our wifi connection anywhere in our house. In addition, I'm able to bring my 8 year old laptop across the street and use our wifi on our neighbour's lawn.
How do I connect my cell phone to my home network so that I can use the internet on my cell phone
View 7 Replies View RelatedI have new cell phones, an Iphone 3Gs and a Motorola Atrix, and cannot get either of them to connect to the DIR-655. Both of the phones recognize the wi-fi signal but I cannot get either of them to hook up. Before I go changing passwords and such, is there anything I am missing or need to do differently?
View 1 Replies View RelatedCan I hook up to free wifi at the ymca with my cell phone?
View 1 Replies View RelatedCan i get a d-link and have wifi from my cell phone to laptop for internet
View 4 Replies View RelatedI can't make skype calling on any land line or cell phone anymore. I think I Isp have blocked it. Is it possible that any isp can block ant internet calling?
View 17 Replies View Relatedset up a wi-fi connection between my laptop and cellphone..
My laptop: Acer Aspire 4820t, intel core i3, 2gb ram, running win7 home basic Under network adapters in Control panel, the following items show up..
1.Atheros AR8151 PCI-E Gigabit Ethernet Controller
2.Broadcom 802.11n Network Adapter
My cellphone: Motorola Defy running on Android v2.1(Eclair)
I use a USB modem to connect to the internet. I need to set up a wi-fi connection between the laptop and the phone so that i can use the internet connection using the phone.
Recently it has been really slow (less than 300kb/s) and I am tired of it. I want to use wired again but the modem and router are in my basement. Running an Ethernet cable from the router to my room is a last resort. I currently have Cox Internet, Telephone, and Cable. I do have a cable supplying internet to my room, so that is not my concern. How can I move my modem and router without losing phone service? Can it be any phone cable or does it have to be one connected to a special outlet as the modem currently is?
View 4 Replies View RelatedI cannot make a long distance fax with my phone card & HPOffice Jet 6500A-It will take the long distance fax # then say long distance is not supported.If I dial my phone card # - It then asks to press 1 for english, 2 for spanish and there are no dials lit to enter the language choice. If that would go through, I could enter my pass code then dial the long distance fax # once my available minutes are confirmed.It seems like this was not thought out on this machine - how am I to make a long distance fax with out having to purchase long distance service from the phone company?
View 1 Replies View RelatedHow do I get guest passwords for wifi access on my android cell?
View 1 Replies View RelatedI recently purchased an EA4500. It started out working really well, but recently I noticed that my speed on my iPhone and iPad has dropped significantly. When I'm in my office where the router is set up, I'm getting around 15 to 20 mb download speed and 5+ upload speed. When I go to my living room about 40 feet away my speed drops to 1mb down and less than 1 up. I expect to see a drop in my performance the further away I get from the router, but this seems really unacceptable to me.
View 1 Replies View RelatedWell I spent last night installing a new WIFI router on my home network. I had problems from the start. I found out that Linksys had changed their default IP address on their routers since I installed my previous router, a Linksys also. So I had to used their setup utility to configure the new router. Thats when I found the change in the IP address. The Linksys setup utility is not the most friendly user setup utility.Finally got the new router setup. I went to bed and when I went to check today's weather forecast I found that the new router's WIFI signal strength was much lower than my old router. Ended up re-installing my old router. I can't return the new router now because I threw out the box for the router. Guess it will sit on the shelf as a spare if needed.
View 9 Replies View RelatedThe wireless connection barely registers in the Speed Test within Cisco Connect - .56 download, 5.35 upload. A cable connection gives 2.4 download and 5.5 upload. The E900 is not far from the computer with no obstacles between.Is the wireless portion of the E900 set up improperly? Is there anything I can do to improve the wireless performance?
View 4 Replies View RelatedI have tried all the speed test sites and tried downloads with and without my EA2700. Every test shows about half the perfomance when connected through the router. My speed tests at speedtest.net with a direct connection are in the 21-26Mbps range, the same tests run about a minute later through the EA2700 fall in the 10-12Mbps range with spikes up to 17Mbps.I've reset the router and modem.I've gone back to the 1.0.14.129982 Firmware (which it's currently on)I've set the MTU everywhere from 1400 to 1500 (literally EVERY setting for at least a couple of hours) it is 1492 currently. None of these have worked. In addition, when a large stream starts, such as a Steam download, I will lose ALL connectivity. Going in to Network and Sharing and clicking to connect to the internet restores the connection, no need to reset any hardware (which is odd in itself). I have had MANY routers over the years and I've all but exhausted support with service provider as the connection is solid if I eliminate the router.Main machine is a Windows 7 Home edition Total of 5 machines, 3 of which see regular use All machines go through a Trendnet 16 port switch and performance is the same direct or through the switch I m on Brighthouse in Central Florida and have all but exhausted their support.
View 4 Replies View RelatedI just bought an E1200 router, which is downstairs and about 50 ft away from me. I have only about 60% signal strength, and my speed test when connected wireless is only 5mbit up,4mbit down. I plugged my computer into the router via ethernet and I get 30mbit up, and 5mbit down.Are there any settings you could suggest to improve this? I tried several channels already, none above 60% it seems.
View 2 Replies View RelatedI have upgrade firmware of E1500 to latest release to version 1.0.04 and found out bad performance of the router QoS.
View 6 Replies View RelatedI have EA4500 acting as a router on domainless all-Windows network of two XP machines.Unfortunately, EA4500 aggressively grabs the role of the Master Browser (I am talking about Computer Browser Service) on the network (regardless in which order you power the devices up) and then doesn't serve as a working Master Browser - both Windows machines stop listing the network computers in the "Network Neighborhood" and incur massive timeouts when attempting to view the listing.A quick look with 'browstat.exe status' reveals that indeed the router has announced itself as a Master Browser device, but returns errors when you query it.Quite predictably, without the router, both machinces figure out amongst each other who will be the Master Browser and everything works fine. The problems begin only when you add the router to the network.
1) Is there any way to make EA4500 work like a full-blown Master Browser (the one that not only announces itself, but also serves as such)? having a Master Browser integrated in "always-on" router would really improve the predictability of the network.
2) If not, is there any way to disable the Master Browser on EA4500? For now I managed to achieve that by assigning the router to different workgroup name, but this is lame, as I now can't connect a disk storage to the router and use it within the same workgroup.
I just picked up a EA6500 wireless router today and I am a bit disappointed. I paid $199 for this router because I was hoping to take advantage of of fast N speeds and the advanced features it offers.When I first logged in to set up the router, I saw an amber exclamation point with a note that read "Updating Linksys Smart Wi-Fi Service". When I put my password in I was met with a "Unexpected Error" message.Also, the firmware updater doesn't work. Now on to the more bothersome issue. Wireless speed is poor. I replaced a WRT160NL router with this one. On my old router using WPA2-Personal (AES) I would see speeds of ~300 Mbps. On my EA6500, I see 120 Mbps. I have checked and double checked all wireless and security settings and don't see anything that looks wrong.
View 9 Replies View Related