Linksys Wireless Router :: EA4500 Poor Range On 5.0 GHz?
Jan 9, 2013
Well I spent last night installing a new WIFI router on my home network. I had problems from the start. I found out that Linksys had changed their default IP address on their routers since I installed my previous router, a Linksys also. So I had to used their setup utility to configure the new router. Thats when I found the change in the IP address. The Linksys setup utility is not the most friendly user setup utility.Finally got the new router setup. I went to bed and when I went to check today's weather forecast I found that the new router's WIFI signal strength was much lower than my old router. Ended up re-installing my old router. I can't return the new router now because I threw out the box for the router. Guess it will sit on the shelf as a spare if needed.
View 9 Replies
ADVERTISEMENT
Aug 24, 2012
I recently purchased an EA4500. It started out working really well, but recently I noticed that my speed on my iPhone and iPad has dropped significantly. When I'm in my office where the router is set up, I'm getting around 15 to 20 mb download speed and 5+ upload speed. When I go to my living room about 40 feet away my speed drops to 1mb down and less than 1 up. I expect to see a drop in my performance the further away I get from the router, but this seems really unacceptable to me.
View 1 Replies
View Related
Sep 28, 2012
I have EA4500 acting as a router on domainless all-Windows network of two XP machines.Unfortunately, EA4500 aggressively grabs the role of the Master Browser (I am talking about Computer Browser Service) on the network (regardless in which order you power the devices up) and then doesn't serve as a working Master Browser - both Windows machines stop listing the network computers in the "Network Neighborhood" and incur massive timeouts when attempting to view the listing.A quick look with 'browstat.exe status' reveals that indeed the router has announced itself as a Master Browser device, but returns errors when you query it.Quite predictably, without the router, both machinces figure out amongst each other who will be the Master Browser and everything works fine. The problems begin only when you add the router to the network.
1) Is there any way to make EA4500 work like a full-blown Master Browser (the one that not only announces itself, but also serves as such)? having a Master Browser integrated in "always-on" router would really improve the predictability of the network.
2) If not, is there any way to disable the Master Browser on EA4500? For now I managed to achieve that by assigning the router to different workgroup name, but this is lame, as I now can't connect a disk storage to the router and use it within the same workgroup.
View 9 Replies
View Related
Jan 4, 2013
I own a ea4500 wireless router, I have tested the speed at speedtest.net and wirelessly I get around 9 mbps. My speed is 23 mbps when I hard wired the pc. I have check the speed on a tablet ( android ), pc and a mac to about 5 feet away from the router with no walls or anything between the two devices.I have checked all the settings but I don't see anything wrong, I have changed to N mode only to make sure I use top speed.All my devices are able to use N.
View 3 Replies
View Related
Sep 29, 2012
I am backing up massive amounts of data to the cloud. Everytime I do this, the wireless performance on my EA4500 seems to degrade to half its throughput. I am using the 2.4 GHz band.
View 9 Replies
View Related
Apr 26, 2012
I just installed a new EA4500 and the range is terrible. How can I increase it?
View 1 Replies
View Related
Dec 5, 2012
I have my router and modem in an upstairs office. I get terrific signal strenth and wifi connections throughout 80% of my home. I would like to shore up that remaining 20%.
I cannot realistically move my EA4500 to a "more central" locationBefore purchasing this router, I used a netgear + netgear extender. They worked horrifically together along with my wifi devices - they dropped signals every 4-5 minutes, even with bare-bones data usage. (I've had no connectivity issues, thus far, with the Linksys product)My home has two levels - no basement, no crazy concrete walls or anything. I figured on installing an extender OR another EA4500 downstairs to extend my signal. How two EA4500's work together, if anyone has a similar set up, compared to how (and what model) an extender may work to boost my signal distance in this situation. Primarily, in that "20%" deadzone, I need to use an iPad / iPhone - nothing that would consume tons of bandwidth.
View 9 Replies
View Related
Feb 14, 2013
I have been experiencing problems with my Linksys EA4500 router not being able to find my network. I reset the router and it was able to find my network, but said it was out of range despite it not being so.
View 1 Replies
View Related
Aug 26, 2012
I recently upgraded from E1500 to EA4500.Can I utilize my E1500 as a wireless range extender for the EA4500?I would like to setup my E1500 in my back bedroom to repeat the signal of the EA4500 in my living room.Can this be done wirelessly without connecting an ethernet cable between the two routers?
View 2 Replies
View Related
Aug 5, 2012
i have a 541N running the latest firmware 2.0.2.It has 3 SSIDs for the 3 vlans that it has.I have configured b/g/n.The power is fullIt is powered via POE.The end customer tells me that the range it covers is very very small!Comparing to traditional low budget APs the power is very very low.It does not cover 30-40m in free space where other APs do.Do i need to configure something more in the radio settings?
View 2 Replies
View Related
Oct 9, 2012
The wireless connection barely registers in the Speed Test within Cisco Connect - .56 download, 5.35 upload. A cable connection gives 2.4 download and 5.5 upload. The E900 is not far from the computer with no obstacles between.Is the wireless portion of the E900 set up improperly? Is there anything I can do to improve the wireless performance?
View 4 Replies
View Related
Sep 20, 2012
I have tried all the speed test sites and tried downloads with and without my EA2700. Every test shows about half the perfomance when connected through the router. My speed tests at speedtest.net with a direct connection are in the 21-26Mbps range, the same tests run about a minute later through the EA2700 fall in the 10-12Mbps range with spikes up to 17Mbps.I've reset the router and modem.I've gone back to the 1.0.14.129982 Firmware (which it's currently on)I've set the MTU everywhere from 1400 to 1500 (literally EVERY setting for at least a couple of hours) it is 1492 currently. None of these have worked. In addition, when a large stream starts, such as a Steam download, I will lose ALL connectivity. Going in to Network and Sharing and clicking to connect to the internet restores the connection, no need to reset any hardware (which is odd in itself). I have had MANY routers over the years and I've all but exhausted support with service provider as the connection is solid if I eliminate the router.Main machine is a Windows 7 Home edition Total of 5 machines, 3 of which see regular use All machines go through a Trendnet 16 port switch and performance is the same direct or through the switch I m on Brighthouse in Central Florida and have all but exhausted their support.
View 4 Replies
View Related
Nov 6, 2011
I just bought an E1200 router, which is downstairs and about 50 ft away from me. I have only about 60% signal strength, and my speed test when connected wireless is only 5mbit up,4mbit down. I plugged my computer into the router via ethernet and I get 30mbit up, and 5mbit down.Are there any settings you could suggest to improve this? I tried several channels already, none above 60% it seems.
View 2 Replies
View Related
Jun 2, 2012
I have upgrade firmware of E1500 to latest release to version 1.0.04 and found out bad performance of the router QoS.
View 6 Replies
View Related
Jan 19, 2013
I just picked up a EA6500 wireless router today and I am a bit disappointed. I paid $199 for this router because I was hoping to take advantage of of fast N speeds and the advanced features it offers.When I first logged in to set up the router, I saw an amber exclamation point with a note that read "Updating Linksys Smart Wi-Fi Service". When I put my password in I was met with a "Unexpected Error" message.Also, the firmware updater doesn't work. Now on to the more bothersome issue. Wireless speed is poor. I replaced a WRT160NL router with this one. On my old router using WPA2-Personal (AES) I would see speeds of ~300 Mbps. On my EA6500, I see 120 Mbps. I have checked and double checked all wireless and security settings and don't see anything that looks wrong.
View 9 Replies
View Related
Apr 13, 2012
I recently bought a e4200v2 router and installed it by connecting it with my old modem d-link 2730u.I was disappointing to see that the new router i.e e4200v2 has the exact same coverage as my old router which is costing about 35 usd and linksys cost about 200 usd.. this is a terrible waste of money!!
View 1 Replies
View Related
Aug 5, 2011
I bought a new linksys E1000, I have poor mobile service, calls dropping, I wanted to know how to have better service with my Router? what steps do i have to take? also we have straight talk phones, samsungs, I bought it thinkng we would get better service.
View 1 Replies
View Related
Oct 7, 2011
I have a WRT54gh, and the signal strength is extremely poor. Full strength at about 15 centimeters, Then drops to 50% at 50 centimeters. By 1.5 meters, the signal is extremely weak or not visible. Have updated to the latest firmware, factory reset and power cycled. There are no other wireless networks or devices that would provide interference Have experimented with channels, thresholds, transmit type, encrypted/open, intervals etc..No luck. Due to signal dropping off so quickly it seems like a transmit strength issue rather than an issue that can be solved in the menu. I'm wondering if there's a way I can console log-in to the Linux kernel and check the transmit strength and perhaps bump it up by a few DB? It's out of warranty so a solution involving opening the case is also acceptable.
View 9 Replies
View Related
May 31, 2011
Enabling auto detection of the upstream bandwidth in the qos tab results in a significantly lower than normal maximum upload speed? I have the Blast plan from comcast (20/2 sustained; 30/4 with powerboost). Here are the results.
With the Qos OFF:
View 9 Replies
View Related
Dec 30, 2012
I just got my EA6500 router before the holidays and set it up before going on vacation so I can't be sure that wireless was ever working at full speed, due to lack of testing. As it stands now my desktop (hardwired into the router) gets d/u speeds of around 16 to 20 Mbps down and 1 to 2 Mbps up, this is pretty standard from my old router and in the range for what I pay RCN in Massachusetts for. When I connect my wife's Mac and my Laptop to the wireless I get in the range of 1 to 2 Mbps down and 1 to 2 Mbps up
View 9 Replies
View Related
Sep 2, 2012
I've looked all over the internet for this and can't find a definate answer. Waited for live chat and got kicked before I got to talk to someone... Just sold my computer and the plan was to buy a newer mac but we've been getting along fine without a computer with just using our iphones. So my question, I see that Cisco has the Connect Express app for the iphone, and I've read about all the features it has like changing settings, router features, etc. But I can't find anything on using the app for the initial set up of the router. I'm currently on an older linksys router (set up before we sold the computer) but it's time for a needed upgrade.
View 3 Replies
View Related
Apr 30, 2012
I got my ea4500 all set up. never had a media servor or anything like that, figured this would be an easier way. when i hook up my exteral i can find it but i can only view the files in windows media player. how can i just browse the folders manually? WMP doesnt let me browse the folders as they actually are on the HDD which is such a pain in the **bleep**.
shows a device in "network infrastructure" but it says problem sending command to the program when i click that. i dont want to have to view the HDD in WMP as a media device...
View 1 Replies
View Related
May 12, 2012
My new EA4500 (fw ver 2.0.36) won't obtain an IP from a Brighthouse TM502G cable modem. The EA4500 replaced a functioning WRT54G which would obtain an IP from the ISP. I've tried upgrading firmware and have used both straight-through and crossover cables between the EA4500 & TM502G to no avail. The EA4500 would issue IPs to it's clients, but not obtain one from it's TM502G. At the moment, all 3 are daisy-chained together with the old WRT54G in the middle in order to make the EA4500 work. Both WiFi and LAN ports function in this configuration.
View 1 Replies
View Related
Dec 19, 2012
I downloaded and installed inSSider for Windows and, under the 2.4 Ghz tab, I can clearly see the Router SSID, on Channel 6, exactly as configuredbin the Router. However on the 5 Ghz tab, nothing? I can see Channels 36, 40, 44, 48, 52 and so on BUT no trace of any wireless signal here?I carefully reviewed the wireless settings options and it is indeed enabled.
View 1 Replies
View Related
Feb 4, 2013
Connect my primary router EA4500 to another EA4500?
I tried and followed the steps provided here but it doesn't work at all for the Xth time already.
The first router installed and ran flawlessly in minutes. The second one has failed to work in bridge mode for 3 hours now.
View 4 Replies
View Related
May 20, 2012
Can we get a forum title just for the EA4500?
View 1 Replies
View Related
May 15, 2013
In my apartment, I can receive the wireless signal of free scholl wireless, which is accessable without user name and password. Although the signal is not good, but we used to use a router EA3000 to relay the signal. Now my roommate is leaving with this this router. So I bought EA4500 and try to do the similar job. However, I find that the configurations on 192.168.1.1 are different between EA3000 and EA4500. Many options cannot be found in the EA4500 page, such as the wireless client.
View 4 Replies
View Related
Apr 23, 2013
I recently got an EA4500 from a friend and when I tried to run the Cisco Connect CD on my MacBook it gets to 25% and then stops and says it can't find a router. I've reset, powercycled, unplugged, plugged, searched, and searched but I cant seem to get it to find the router.
View 3 Replies
View Related
May 6, 2012
I'm hoping to get this router to allow WOL (actually wake on WAN) but it seems to be blocking the necessary broadcast magic packet even though the settings appear correct. It's not critical, but the reason is this: I'd like to shut down the home PC, but when necessary be able to start it up and use a VPN to access any info I need remotely.
From within the LAN, I can verity that WOL works. I have NIC and PCI WOL enabled in the BIOS. The NIC (a Marvel Yukon Gigabit) has WOL enabled as well as "allow this device to wake.." using magic packets under power management. The target machine's local IP is reserved through the EA4500 DHCP Reservation table. Just for troubleshooting, I opened port 9 in windows firewall. More importantly, I have ports 7-9 forwarded to my target LAN address. Single port forwarding... it just has been less reliable (?). I'm using a mask of 255.255.255.128 in order to enable broadcasting on .127 at some point as it seems it must be necessary. Broadcasting on .255 is not possible, despite some workarounds I found on the web. EA4500 firmware is the latest, 2.0.37. I have turned off the multicast filter and the anonymous internet filters under the security tab.
So, with these settings, I can WOL from inside the network no problem either targeting the LAN address, or by using a dyndns address. So far so good.With these same settings, I can go to WAN using Depicus or the Cloud Connect Pro app over 4G on an iPad. With all these same settings, WOLsniffer confirms the magic packet still getting through over WAN (obviously using the dyndns address). Even better, I can shutdown the target PC and STILL wake it up within a few minutes from WAN. Let me restate that! Wake up over WAN works, but only for the first few minutes after a shutdown.
However, if I wait 20 minutes or so, WOL stops working. If I change the port forwarding to .127, not only does it not work, but WOLsniffer will fail to see the magic packet. My conclusion is that the ARP table is getting purged, which is undertandable, and so the target LAN address isn't in memory. However, frustratingly the EA4500 will not broadcast no matter what settings you use. This limitation is undocumented, and counterintuitive since the software allows you to disable multicast filtering and does not notify you of an error when forwarding to xxx.xxx.xxx.127 with a 255.255.255.128 mask.
View 5 Replies
View Related
May 31, 2012
How do I enable WDS on my new EA4500 ?
View 3 Replies
View Related
Jun 11, 2012
Was thinking to buy this router but I am not sure if it supports magic packets in order to use wake on lan on PCss and NAS
View 3 Replies
View Related
Mar 3, 2013
I really want to have a password on my wifi, but I cant control it when all it keeps asking me is for a CD I have a EA4500
View 1 Replies
View Related
May 11, 2012
Using the FTP server built into the EA4500 firmware. I can get the FTP service to work from some computers outside my home network, but when i try to access the service from a PC within my home network i am unable to connect to the server through the WAN address.
View 1 Replies
View Related
