Network Security Key To Lock Wireless Internet?
Nov 15, 2011
I just hooked up my wireless internet yesterday and I wanted to lock it so no one can use it like the neighbors and when I click on it just now, it asks for the network security key and cant find or even remember and dont know what this is?
View 1 Replies
ADVERTISEMENT
Sep 23, 2012
how to find security lock?
View 1 Replies
View Related
Apr 4, 2013
I've been using the trial version of a product called Folder Lock on another computer than the one I'm using right now to type this message. I got a little too enthusiastic about locking away folders into Folder Lock on that other computer, and I think I locked away Folder Lock itself.In the past (before this problem developed), when I clicked a Folder Lock icon, it used to prompt me for the Folder Lock password, which I would then input, and then Folder Lock would open, and I could lock and unlock folders. But the problem is that now I don't get prompted for the Folder Lock password. I get a message (from Folder Lock) that says, roughly, "you may not have permissions to carry out that action." So even though I have the Folder Lock password, I can't open Folder Lock, because it won't prompt me for the password, and just says I don't have permissions.I also locked into Folder Lock my downloads folder on that computer, and apparently folders or icons that used to allow me to access the internet on that computer. I can no longer access internet from that computer.I'm wondering how I can get Folder Lock to prompt me for the password, so I can open Folder Lock. I would like to unlock all the folders I locked -- including if I locked Folder Lock itself! I locked away a lot of my important stuff. I wonder if I should do a system restore to a date before I installed Folder Lock, but I wonder if the system restore might fail to delete Folder Lock, because Folder Lock might prevent its own deletion. I have Folder Lock 7. I have Windows 7.
View 3 Replies
View Related
Jun 24, 2012
I have had my WRT610N for several years and I noticed the other day that my network was not locked. I went to task/change wireless connection and clicked on it. The next screen gives me two options: " Wireless Security" or "Network Lock" and under network lock it states "Network Lock: Not enabled". I then click on the enable network lock button and I get the following message "network lock could not be enable." No matter howmany times I do this I get the same message. So, why is Network Majic not letting me lock my network? It has always worked before and just recently did this. I have done a factory reset on my router to see if this could be the problem, but i still get the same message.
View 1 Replies
View Related
Aug 23, 2011
My network keeps losing the lock icon that displays with the network name. I think this is happening with power shortages or outages. I have checked the settings online and it says WPA Preshared Key. Is the network still secure? I have a WRT54G wireless router.
View 1 Replies
View Related
Mar 9, 2012
How do I lock my internet acces so other cannot connect to internet
View 1 Replies
View Related
Mar 18, 2011
My dad has a Windows 7 laptop. He installed Network Magic at my house on his laptop. Now my work laptop and my Kindle cannot get on the internet on my home network.Could the Network Magic lock down my home network?
View 1 Replies
View Related
Apr 15, 2013
Region : Hongkong
Model : TL-WDR4300
Hardware Version : V1
During long, heavy download streams (such as BT, video streaming) the router WDR4300 would still lock up the internet (WAN) connection for that client. I could still go to the admin web page on that client but no internet activity would occur until either rebooting the router.
View 8 Replies
View Related
Jul 28, 2011
I have forgotten my network security key to connect to wireless internet.
View 2 Replies
View Related
Feb 9, 2011
I am connecting my laptop to a wireless connection I am at connect to network. and enter network security key. do not know the security key
View 2 Replies
View Related
Dec 24, 2011
I have verizon fios internet and a wireless home network with verizon internet security and I want to ghange my IP adress on my laptop
View 6 Replies
View Related
Jan 19, 2013
I am trying to connect to a Security-enabled wireless netowork. I have the key. My problem is that I can't seem to figure out how to enter it. When I try to connect I open the "view available networks"window. I see the network name and it shows a strong signal (all 5 green bars).
View 3 Replies
View Related
Oct 21, 2012
i want to find security key of my connection
View 1 Replies
View Related
Mar 17, 2012
I am trying to open internet through wi-Fi but my system is asking for network security Key and I am unable to find it out.
View 3 Replies
View Related
Feb 16, 2012
Just got a new laptop which is requiring Network Security Key to connect with Internet.
View 1 Replies
View Related
Jan 6, 2013
Region : Mexico
Model : TL-WR841ND
Hardware Version : V8
Firmware Version :
ISP : Telmex fiber
I use this router to replace the FO rooter that my ISP provides with the service as it's too limited (no NAT name translation, closes NAT, no uPnP etc...)
So the WR841ND acts as my main router, DHCP server, WiFi AP for all my network. My problem is that once in a while ( every 1 or 2 days) the wireless loses functionality, I still can see it from my devices, but can't connect, even fixing the IP (apparently not a DHCP issue then). The only way to fix this is to shut down the router 10 sec and restart it.
This brings another issue, I have another router (WR741) in WDS dispatching the signal to another part of the house to wired devices (Xbox , wd tv live hub) and it loses the WDS link, again the only way for this router to recover it is to restart it which is annoying.
View 5 Replies
View Related
Dec 26, 2004
I have a wireless card that causes my Inspiron 5100 to lock up about once a day. I have tried 3 different types of cards (Netgear, Microsoft, Dell) all with the same result. I have a laptop cooler because I thought that the heat might be causing the problem - not the case. If I leave the wireless card out the lockup does not happen.
On a side note...I have tried to update the BIOS on my computer. When I download what seems to be the appropriate file, it tells me that I don't have the appropriate file.
View 20 Replies
View Related
Jan 12, 2012
How do I find my network security key for my cisco e1000 router if the computer that it is installed on is broken?
View 1 Replies
View Related
Nov 12, 2012
My Vista computer and my XP computer had been happily "talking" to each other, sharing files and printers. I got tired of paying $70 a year for Norton Internet Security, so I uninstalled it (using the Norton removal tool) and selected the Windows Firewall. I also installed Avast! and SuperAntiSpyware. Now neither computer talks to the other. When I run "\FamilyRoomHPOfficeJet" I get "Windows cannot access \FamilyRoomHPOfficeJet" . Check spelling, etc. Get error code 0x800704b3 "The network path was either typed incorrectly, does not exist or the network provider is not currently available..." What have I messed up by going from the Norton firewall to the Windows one.
[code]....
View 14 Replies
View Related
Apr 13, 2013
I just bought a Netgear Router WNR 2000 v3 and installed it. I got inside the router and could set up a Network Name and security key. However, I can not access the internet when I chose a security password using WPA 2, WPA-PSK + WPA 2 PSK, or WPA/WPA 2. It only accesses the internet when I chose None.( no secured ).At this time, my network is unsecured because there isn't way I can access the internet when I create a security key using the 3 options the router offers.
Note : I have tried the 3 security options creating a key number and my computer connect to the wireless network but don't access the internet. It only access the internet when I select None ( no secured )
View 2 Replies
View Related
Dec 24, 2011
I'm new to IT, and have been put in charge of managing our servers hile my boss is on vacation.We currently have a Sonicwall Network Security Appliance that handles our Firewall/VPN and have web content filtering set in place.I have a user who belongs to 2 CFS policy groups that we have set up. I've double checked with Active Directory, and he is a member of both groups.
This person SHOULD have access to Job searches/ and Restaurants,but receives a "content blocked" message on his browser.It appears to me that the settings in Sonicwall are correct, as well with AD member groups.
View 3 Replies
View Related
Oct 29, 2012
Having an issue with a Cisco Linksys E1500 on a home network. The device has a feature to provide a guest wireless network but the guest network can't get to the internet. A wired connection is fine, as is the normal wireless network but not the guest. The cheesy thing is, that it doesn't list an option for what type of wireless security protocol you want on the guest network. I'm assuming that it uses the same security protocol that the normal wireless network uses, but who knowsEspecially weird is that it asks you what password you want on the guest network but then the guest network show to be insecure when you try to connectthought maybe it was something funky with some of my configurations so I went ahead and factory defaulted it and just set it up with an insecure network for both the normal and guest networks. This didn't solve it. The guest network still couldn't get to the internet. In fact, the guest network can't even ping the router.
View 1 Replies
View Related
Nov 19, 2011
how to find the network security key,wireless network
View 1 Replies
View Related
Oct 13, 2011
how to lock the MAC address in a system?
View 1 Replies
View Related
Apr 27, 2011
I work as an administrator for a small business (~30pc and a Windows 2003 R2 server ).Recently, we started to have problem with our lan, the network start to kinda lock-up randomly. For example, browsing folders is fine then you switch to one and the explorer window just do nothing (with a loading cursor) and after 4 second everything refresh and work again, then in word or any other program (sometime not even related to network files/folder) you press the save button and it do the same, do nothing for 4-5 seconds then refresh and work again.I'm positive that no process on the server take up enough CPU time to do that, it's not a per-pc problem since everybody is affected when the problem start and when I reboot the server it work like a charm for another day then the problem may restart the next day.Nothing show up in the event viewer of both PCs and the server and we can't find a correlation between the problem and high CPU/LAN usage on the server (at worse CPU is used at 10% and LAN at 2%).Our RAID controller and our SAS HDs are working flawlessly, we're in the process to change our infrastructure anyway but since I can refer to people that may know their stuff way more than myself I though Id ask here.We first though that our switches may be in cause but then why rebooting the server would be correcting the problem ?
View 7 Replies
View Related
Oct 13, 2011
How to lock MAC address in a System?
View 1 Replies
View Related
Feb 24, 2013
I've been trying to set up network filtering, and am having no luck. I'm trying to block certain folders on a NAS (DNS-320). My 8 yo insists that watching The Walking Dead is appropriate. So, I need to block specific subfolders so he can't access them. I would like to keep the NAS available, because there are some ebooks there that he copies to his tablet (Blackberry Playbook) to read. I DON'T want to password protect the DNS-320, because I stream the videos, mainly using XBMC / OpenElec with SAMBA shares. (If not, I can block the table from the whole NAS.) I prefer to block by MAC so there are no IP switches that happen. I also would like to block certain website (youtube) at specific times. Is that possible? Or I can turn off internet for the specified MACs.I wanted to use FREEDNS for the internet filtering, but my providers DSL modem won't keep the changes to DNS server, so that's out.
View 2 Replies
View Related
Jul 24, 2012
What is the security key for wireless network?
View 1 Replies
View Related
Dec 6, 2012
When i connect to my wireless network,it asking for security key. How can i find security key?
View 1 Replies
View Related
Dec 30, 2011
One of our accounting administrators will be working in our server this weekend from his home remotely. He wanted to know if there was a way I could temporarily lock users from remoting in a few days to prevent them from messing up his work.The only way I could think of was disabling the accounts in Active Directory and then re-enabling them once he was done. Server is running Windows Server 2003 with the users remoting in via RDP. They all have accounts in Active Directory.
View 1 Replies
View Related
Mar 25, 2012
how many unsucessful attempts a user has to access the LMS application prior to the account being locked? Is this configurable?
View 3 Replies
View Related
Oct 31, 2012
Region : Germany
Model : TL-MR3020
Hardware Version : V1
Firmware Version : 3.14.2 Build 120817 Rel.55520n
ISP : T-Mobile
is it at all possible to lock a 2G/3G-Stick to 2G or 3G with the TL-MR3020 (e.g. if the desired network (2G or 3G) strength is low)? If not, this would be a useful feature for upcoming firmware versions
View 3 Replies
View Related
May 22, 2012
whats my security key my wireless internet?
View 1 Replies
View Related