My network keeps losing the lock icon that displays with the network name. I think this is happening with power shortages or outages. I have checked the settings online and it says WPA Preshared Key. Is the network still secure? I have a WRT54G wireless router.
View 1 RepliesI am now using a neighbor's wi-fi connection because my computer doesn't allow me access to my wif-fi.My server once entered my computer and since then I think it changed my key code.I get as far as the window for 192.188.1.1 and when I type admin it says denied. Very frustrating because my cell phone is now off my neighbor's wi-fi and my kindle lost the connection to downloadI was on the live chat and paid Linksys
View 5 Replies View RelatedI have lost the start-up cd for my router, where to find a downloadable one so i can hook up my router.
View 1 Replies View Relatedis there anyplace to download the software or a linksys wrt54g wireless
View 1 Replies View RelatedI been using my WRT54G with no problems for 2 years now. I lost wireless. I have 1 pc wired to the router and it works fine, e-mail, accessing the internet, everything. But I have 6 wireless devices ( 2 PCs, a printer, Nintindo 3Ds, a laptop and a nook) that use the wireless part of the router at different times. Anyways, last night, one of the wireless PCs lost connection, not seeing the router. Then I checked with each of the other wireless devices. None of them see the router. I tried many different things: powering down the router for two hours, hitting the reset button for 30 seconds, I even uninstalled the router and re-installed it and ran the setup-wizard. Again the pc I have wired to the router works but none of the wireless devices can see the router.
View 1 Replies View RelatedI lost my power adapter for the WRT54G router. I have a 12V / 1000 mA brick adapter.
View 5 Replies View RelatedI haven't used my Linksys WRT54G v5 wireless router for about 1 1/2 years and needed it now at a new place.I set a user name and password I've long forgotten for access to the web based security protocols for the modem and I've lost the disk for the control protocol program.I tried pressing the reset button to clear the modem and it took the WPA protocol off the modem so I can use it without any security but that's not a good thing.How do I get it freed up so I can get to the security protocols and put security back on my modem?
View 9 Replies View RelatedMy router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
I have lost my installation disk for my WRT54G Version 8. Where I can download the drivers and installation.
View 9 Replies View Related My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
I have a Mac laptop. Verizon ISP.
I have had my WRT610N for several years and I noticed the other day that my network was not locked. I went to task/change wireless connection and clicked on it. The next screen gives me two options: " Wireless Security" or "Network Lock" and under network lock it states "Network Lock: Not enabled". I then click on the enable network lock button and I get the following message "network lock could not be enable." No matter howmany times I do this I get the same message. So, why is Network Majic not letting me lock my network? It has always worked before and just recently did this. I have done a factory reset on my router to see if this could be the problem, but i still get the same message.
View 1 Replies View RelatedI recently set up a wrt54g router that I got used from a friend. I pressed the 'reset' button on the back, configured it for my computer according to the instructions on the website, and everything worked fine for a couple of days. Then I lost connectivity, tried powercycling my modem, but had to reset and reconfigure the router again. Worked fine again for a couple of days, then the problem repeated itself, so I reset and reconfigured again.
View 1 Replies View RelatedI seem to have lost my username and password for the admin page for my WRT54G router.Is there a way to retrieve or reset the login?
View 9 Replies View RelatedDropped VPN connections.I experienced a similar issue a few years ago with my LinkSys WRT54G router with dropped connections to my corporate network using the Cisco VPN Client. To make a long story short the problem was the result of the following:
1. The default ""Client Lease Time" on LinkSys routers is 0 which means 1 day or 24 hours.
2. By DHCP Protocol definition, DHCP clients must renew the DHCP client IP address lease at the 1/2 life cycle of the lease (12 hours if using the router's default setting). This is deadly for VPN clients as the short period of time when the client IP address is no longer valid, the VPN client considers this a loss of network connection. The LinkSys E-series routers further aggravate the situation by randomly assigning new IP addresses to DHCP clients instead of reassigning the client's previous IP address and tends to favor higher host IP addresses in the defined range.
Suggestions to prevent lost VPN client connections:
1. Change the "Client Lease Time" on the router to 8640 minutes (6 days 00:00:00).
2. Prior to establishing a VPN client connection, use the Windows Command Prompt to issue the "ipconfig /renew"
command to obtain a new IP address from the router that will be good for 3 days (72 hours).
3. Configure your E-series router to use the <DHCP Reservation> option to pre-assign IP addresses to your systems making sure they are outside the range of the dynamically assigned DHCP addresses. Using default settings,these would be in the range of 192.168.1.2 thru 192.168.1.99 as the router starts at 192.168.1.100 thru 192.168.1.149.
I purchased a used WRT54G router that has DD-WRT firmware installed. I do not have the user name and password for it. How do I get around that issue so I can set the router up on my network. I would like to keep the DD-WRT firmware.
View 2 Replies View RelatedI am using Windows 8 and my router is a Linksys E2500, in the Network folder it shows no icon and also I get a error when I right click the device and choose "Network Map" (from what I can tell this feature has been removed from Windows 8.) Both these problems are cause by an outdated Windows 7 driver on the Microsoft Update Catalog (I have Windows 8 configured to download updates/drivers automatically, that's why this installs)The reason there is no icon is because of these entries in the driver INF
[code]....
my compaq presario CQ50 suddenly will not connect to internet.my router is a linksys WRT54G.
View 2 Replies View RelatedLost wireless icon in internet connections
View 1 Replies View RelatedI have a office that was converted from a older townhouse. The building has 3 floors with the distant of each floor expands no more than about 60 - 75 feet from end to end of the building. Not sure what's in the walls as the building is at least 20-25 years old. Total number of users is about 20 - 25.
Here is the problem..
I have a WRT54G wireless router setup to provide wireless coverage for this office, located on the 2nd floor, For some reason, about 10 - 15 feet from the opposite end of the building, the signal drops off big time. Regardless of the floor. So to assist with the signal, I installed a wireless 300N Gain extender on the same floor on the opposite end of the building where the signal was weak. At first, it seemed to work by boosting the signal, but then it seems to show the same issue as before.. sporatic signal loss, signal fluctuation, etc.
My question is should I replace the wireless booster with multiple wireless APs located throughout each floor... maybe 1 per floor? If so, is there a trick to configuring all 3 APs to have the same SSID and same encryptionsso it will be seamless to the users? Since the first AP works fine, I wanted to get 2 additional WRT54G units.
lost connection and can't find icon in system tray or anywhere else to search for wireless routers in range.
View 1 Replies View RelatedUp until 2 days ago I've had no problems with my v1 running 1.0.05. I was copying something to my drive and the connection became non-existent. Going into the menus it shows my drive as having full capacity available. Well i konw thats not true. i unplugged it and directly connected it to a PC. All of my info was there. I connected it back to the router and nothing. No shares of any sorts. It shows it detected the drive. Does not show USB speed and does not allow you to create new shares.
View 1 Replies View RelatedWe have the Linksys WRT150N router. A while ago it suddenly lost the name we gave it when we set it up and now it shows up as Linksys. Also, it is no longer secure, and sometimes we can't even see our network - it isn't even listed. How do I go in and change this? Will I have to reset the wireless information on my printer, etc?
View 4 Replies View RelatedI have been using the WUSB54GSC for several years with no issues until a few months ago. Periodically, it will lose connection to the network. It shows it is connected, but I can not ping the router or do anything else unless I reboot the computer. Thinking it was the WUSB54GSC (I had the Ver 1) I got a new one (a Ver 2). Same thing except now it seems to be happening more frequently (one time, less than an hour after rebooting). I have moved it to other USB ports, uninstalled and reinstalled it, everything I can think of.
View 1 Replies View RelatedI recently had trouble connection to my Linksys WRT54G router. However, in this process I had to create a couple of new profiles/networks/SSID or whatever they are called. I now have one functioning network, but my router is still broadcasting the other two networks. How can I get my router to only broadcast the one network, I am currently using? I erased them from Vista, so that my own computer does not automatically log on to the, but that is clearly not enough. Since one of the networks is not secured with a password (dont ask why), my concern is that my neighbours can access it. BTW, I am using Windows Vista on a Toshiba Satelite A200.
View 5 Replies View RelatedI've downloaded the driver for a tenda usb adapter. What else do I need to do to connect to the WRT54G network? I'm currently connected via an ethernet cable. Running Windows/7.
View 1 Replies View RelatedI have a WRT54G version 3.. i have finished installed it using the web based set up but i can't connect my mobile through the wireless network.
View 1 Replies View RelatedI have the following equipment
E2500 wireless N router (2 of these)
WRT54g router (B/G)
WAP54g access point (B/G)
I am planning to set up a wi-fi network for a single story motel. It is C-shaped; about 300 feet along the longest side with "legs" of 120 and 70 feet. I have included a diagram that I drew for the person that will install it. Until now I have only used that single WRT54g in the office for the entire property and it covers about half the property (left side) but not well and with a dead spot in the top left because of too many walls to go through.
My plan starts in the office (bottom left) with a WRT54g connected to the DSL modem as it always was. That would be connected to one of the E2500s in the middle so it can cover the most area. From there two others would shoot out to each corner (the other E2500 and the WAP54g). They will all be wired together with Cat 5e "riser cable". The routers will be placed in a wide open attic.
1. Is this is a good plan for the size of property? I have heard that N routers have a range of 150ft in every direction so that's why I'm putting one in the middle. Keep in mind that while the attic is open and wood constructed, the walls between rooms are concrete firewall and they haven't been wi-fi friendly. Hopefully putting them in the attic takes care of this.
2. Does starting with a B/G router at the modem mean the N routers will revert to B/G?
3. What are the main settings I need to know about? What "mode" does each need to be set to? Do they need different default gateways?
Can I use the same password/security for all of them? Should I use the same SSID for all?
Am trying to set up a laptop computer to my wireless network (WRT54G V6)
View 9 Replies View Relatedhow to add a WRT54GS V1 wireless router (Router B) into my existing WRT54G V2 Wireless network (Router A). The main router WRT54G V2 router (Router A) is located upstairs and is the link to the ISP (Internet).
- DHCP active
- Wireless MAC filter is enabled with only approved MAC's
- Wireless SID Broadcast is disabled
The secondary Router WRT54GS V1 (Router B) will be located down stairs with no Ethernet cable between the two routers.
- Will need this secondary router to connect to the existing wireless network Router A wirelessly.
- Will need to have internet access.
- Will need to have the wired ports to have internet access as well. Needed to connect the Home A / V receiver to update A / V firmware.
Yesterday i was playing online on my Xbox 360, and was disconnected from the internet. I came downstairs to reset router/modem, once doing so i went into the router settings for my Linksys WRT54G. My modem by default uses the 192.168.1.1, so my router was 192.168.2.1... So i powercycle, log into router settings through 192.168.2.1 and start setting up my port forwarding for the xbox ports. Saved Settings, and the page would not load to say "Settings Saved". Closed the window and now my pc says no internet connection. I had to create a VPN broadband connection to even use the internet on my pc. I can no longer log into 192.168.2.1 for my router, nor can i access 192.168.1.1 to even get into my modem settings.. I'm using windows 7, and the automatic troubleshooting guide tells me to powercycle my modem. My xbox can still see my wireless network "linksys" but will not connect to it, even with the VPN connection i am still hooked though my router and modem.. Im afraid that my router just out of nowhere "died"..
View 2 Replies View RelatedI am using Linksys WRT54G ver 1.05, XP Pro, DSL Modom & IP Address 192.168.1.104 Fails
View 3 Replies View RelatedI have been using this router fine for a year now. Now I can only get on the internet if I am directly plugged into the modem. It says I have limited connectivity. My ISP is Comcast. I have tried resetting the router with no luck. I have tried to update the drivers but I cannot even log into 192.168.1.1. I am in dire need of the wireless cpability. When I go to the run command and type ipconfig it tells me I have no default gateway.
View 9 Replies View RelatedSo I have a WRT54G router since a couple of years now. Laptop (Win7 64bit), ipod, ipad, phones can connect to it without a problem, but new computer (Win7 64bit) can't. I can connect the PC via ethernet without a problem though.
I powercycled my devices, I changed broadcasting options off and then back on, changed my security mode, tried the MAC Cloning (after doing the MAC Cloning, I lost internet connectivity even through ethernet), resetted my security settings, changed SSID, I'm broadcasting through channel 11 2.462. I also tried deleting the HomeGroup
Important fact: the network is in the list of available wireless network, but Signal Strength is No Signal and I can't connect to it. My network adapter is ASUS 802.11n Wireless LAN Card, drivers are up to date. I've upgraded to the latest router firmware.
[Code]....