Linksys Wireless Adapters :: WUSB54GSC - Cannot Ping Router / Network Connection Lost
Mar 10, 2011
I have been using the WUSB54GSC for several years with no issues until a few months ago. Periodically, it will lose connection to the network. It shows it is connected, but I can not ping the router or do anything else unless I reboot the computer. Thinking it was the WUSB54GSC (I had the Ver 1) I got a new one (a Ver 2). Same thing except now it seems to be happening more frequently (one time, less than an hour after rebooting). I have moved it to other USB ports, uninstalled and reinstalled it, everything I can think of.
View 1 Replies
ADVERTISEMENT
Feb 23, 2011
I'm using the WUSB54GSC on a IBM Desktop computer, not old, but not new by any means. We have wireless internet through Comcast, and my room is on the second floor. The router is on the first floor, but it's almost just underneath my room. The internet seems to connect completely fine, but it will disconnect at some things. For example, when I tried to go to mapquest, it was like it was flooding, and it dropped the internet connection. I also play games online, and when I play the actual game itself (GTAA/Online) it plays just fine, no lag, nothing like that, but when I try to connect to Teamspeak, when it's loading the channels after it connects, it just drops the connection..
View 1 Replies
View Related
May 26, 2011
How to install model WUSB54GSC.
View 5 Replies
View Related
May 23, 2011
I just moved and when I unpacked my ANCENT desktop (circa 2005), the wireless adapter, that had worked with no issues in my last home, would not connect to the internet. I bought a new one, a My router and internet connection are working just fine, as I am able to get on my laptop with no problems whatsoever. After doing many online searches and two long chat conversations with Linksys tech support, no one can seem to figure out what the problem is. The last Linksys person I talked to suggested that it might be the router settings that are preventing my PC from connecting. My internet provider (who provided the router) confirmed that there is nothing with the settings to prevent me from connecting to any device.
This is what happened: I installed the software with my new adapter. It worked fine for a day or so until I rebooted my computer. My friend messed around with it and somehow managed to get it to connect again (he has no recollection of how he did this).
When I clicked on "Find Available Wireless Networks", NOTHING came up even though I knew I had not only my own network available, but others in my range. I finally managed (with Linksys agent) to stop the Linksys software from managing the connection, and got Wireless Zero Connection to manage the connection. So now, when I click on my network, I get a little box that says, "Connected!", however in the list of available networks, it shows my network and says "Not Connected". And of course when I try to connect to the internet it does not work.
I can't download a driver because I don't have the ability to hardwire this PC to the internet. Plus, I got it to work before, so I figure there must be a way for me to get it to work again.
View 9 Replies
View Related
Sep 30, 2011
I have spent over 6 hours trying to download the driver for the wusb54gsc ver. 2 software for win7 x64. Your us site is taking over 20 minutes to show it's pages (Sometimes over 40 mins, get more servers!) but the uk site is quick. I search for "wusb54gsc" on Bing and all the sites give me drivers for everything but the 54gsc. Your site (uk) only gave me the user guides! The last time your software decided to just disappear I found it in less than a half hour! I'm very upset link or URL to download the driver from or are you restricting access to it.
View 1 Replies
View Related
Feb 8, 2012
Where are the Vista drivers for WUSB54GSC Hardware version 1?That shambles of a download page has either various XP, which doesn't work, or Vista drivers for hardware v3, which equally doesn't work.If you are really informing me, via a few hours of messing around installing and uninstalling useless drivers, there really is no Vista driver - for a network adapter manufactured in 2008.
View 2 Replies
View Related
Oct 1, 2010
I have the problem that my WUSB600N loses the connection to the internet after a few minutes. I boot the system and the wireless stick run impeccable. After a few minutes the windows 7 network icon show me a yellow exclamation mark and no more internet access is possible. When I unplug the WUSB600N from the system und plug it on again the internet connection is possible again and run then over houres without a problem.
View 8 Replies
View Related
Jan 18, 2011
I am trying to connect to the internet a second, older tower using the WUSB600N ver 2 adapter, the unfortunate part is that I have lost my CD's that originally came with the adapter. I am on my primary machine right now so I am able to get online. I am wondering if there is a way that I can get the proper drivers or software, put them on a USB drive and then put them on the computer that I am trying to connect?I have already tried this, but I cannot seem to get the steps right or I don't necessarily know what I am doing. I am at the Linksys support Page [URL] and I have tried to do as I mentioned before, but I am sort of just expecting it to GO and its not working. The computer i would like to make the WUSB600N adapter for is running windows XP pro Service Pack 3?
View 1 Replies
View Related
Jul 14, 2009
Started a fresh installation on windows 7 RC 64 bit popped in adapter, and tried installing disk, disk would get the portion where it asked to input the adapter, then just vanish after i click next. I restarted, nothing. I clicked set up again, says drivers are already installed....though there is no app to show profiles, im guessing it isn't.
[URL]
version 1.00 would work just like the disk. version 2.00 would not start at all and would give an "the application was unable to start correctly (0x0000005).."
View 4 Replies
View Related
Mar 8, 2011
i tried down loading drivers but computer still says needs cd.
View 4 Replies
View Related
Jul 3, 2011
I lost the set up cd for my linksky WUSB54Gv2 Adapter how can I get a replacement disc.
View 1 Replies
View Related
Jun 11, 2007
I recently reformatted my HD and when i went to install my wireless adapter i realized i had lost my Install CD for my WUSB54G Ver. 4 USB wireless adapter. Is there anywhere to download the install program?(i'm running windows xp)
View 4 Replies
View Related
Feb 27, 2013
I just purchased 2 AE3000 adapters to update my wireless network and cannot get either of them to connect to my wireless network through either of two computers I tried. It hangs for a while looking for address and then I get the 'limited or no connection' note. But yet when I plug in my old AE1000 adapter into either computer I get connected right away. I've looked under the device manager and it shows up there, the LED lights come on and I see my wireless network show up on available networks. I am using the windows wireless manager in lieu of the Linksys one and as such I don't think any specific drivers are being used. I bought two updated adapters to start with is to keep current and NOT have problems.
XP Pro SP3
WRT350N Router
View 6 Replies
View Related
Aug 19, 2011
I been using my WRT54G with no problems for 2 years now. I lost wireless. I have 1 pc wired to the router and it works fine, e-mail, accessing the internet, everything. But I have 6 wireless devices ( 2 PCs, a printer, Nintindo 3Ds, a laptop and a nook) that use the wireless part of the router at different times. Anyways, last night, one of the wireless PCs lost connection, not seeing the router. Then I checked with each of the other wireless devices. None of them see the router. I tried many different things: powering down the router for two hours, hitting the reset button for 30 seconds, I even uninstalled the router and re-installed it and ran the setup-wizard. Again the pc I have wired to the router works but none of the wireless devices can see the router.
View 1 Replies
View Related
Mar 18, 2011
I am currently having problem Enabling my wireless network connection by using AE1000
My system info are as follow
p4p800-e deluxe (mainboard) intel pentium 4 1gb Ram Window 7 32 Bit Marvell Yukon 88E8001/8003/8010 PCI Gigabit Ethernet Controller Intel 82801EB USB2 Enhanced Host controller - 24DD (USB 2.0) ZoneAlarm(firewall)
After intalling AE1000 Driver, I was unable to connect to internet and Wireless network connection appeared disabled in my Network Connections folder. However it is shown to be Enabled in my Device manager screen. no matter what I do, I am unable to enable the connection and connect to internet (when tryiing to enable the connection, a enabling screen pops up, and times out. device still shown to be disabled/grey).
I made the following attempt trying to get this fixed.
uninstalling the deivce and reinstalling it. (doesnt work) uninstalling the device, restart and have the windows update install the device (the deviced was installed. however I am still not able to enable it) Disable & Enable TCP/IPv4 & TCP/IPv6 (doesnt work) uninstalling local Area connection and use wireless to connect (doesnt work) download driver from websit, and install it manually. (does not work) connecting thou CD. I was given a msg telling me to disable my 'other' wireless manager and use the windows wireless manager to connect (i have no idea i had 'Other' Wireless manager >.>) testing whither or not the same adapter works on another PC (it works...) Testing wither or not my router is not working... (well.. im typing right now... so it works...)
View 3 Replies
View Related
Dec 27, 2011
The problem: running a standard single band 2.4gz BT homehub. When using my xbox and wireless headset (razer chimeara) the xbox loses connection. When i tuen the headset off i no longer lose connection. This suggests to me that the headset is simply emitting on the same frequency and bullying the connection, thus the xbox disconnects I have purchased the wireless N adapter to allow the xbox to run on the 2.4 or 5ghz band. I am now looking for a duel band router to allow my xbox to connect to the 5gz band and hopefully this will rectify my interference issue with the headset. I have been lookijg at the e4200 as this supports seperate ssid for 2.4 and 5ghz band, so the xbox can run on the 5ghz and the intererence from the 2.4ghz headset should subside - do you think this would work? Also, with the single ssid duel band routers, where 2.4/5gjz share the same ssid - how would my wireless N devices know to run on the 5ghz and not the 2.4?
View 3 Replies
View Related
Jul 20, 2011
My router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
View 2 Replies
View Related
May 5, 2012
I switch on router and connect my iPad on router linksys cisco e2000. During 10 minutes, There is no problem. After 10 minutes, I have always the connection with my router but no internet. To Avoid this problem, i restart the router with switch and after, no problem. Do you have any ideas to avoid this lost connection after 10 minutes when I switch on my router.
View 2 Replies
View Related
Apr 29, 2012
My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
I have a Mac laptop. Verizon ISP.
View 2 Replies
View Related
Sep 2, 2012
I used the CD to set up my new EA3500 with my Wild Blue Satellite internet modem.An IPhone or IPad can connect and work like a charm, remaining rock solid at all times. Windows 7 on the other hand, will work and then lose connection to the internet. The PC appears to remain connected to the EA3500, but the connection between the EA3500 and modem appear to be lost. I can click on the bar Icon at the bottom and it shows everything to be fine. I click on disconnect and then wait a few seconds and click on connect again and it works for a few minutes before having to do it again. When I look at the router properties the CD set it up for DHCP.
View 2 Replies
View Related
Dec 14, 2011
I bought a DIR-600 a couple of months ago. Days later started experiencing problems, connection would drop, and only way to restore connection was to reset the router.It has its password configured, a secure wireless connection also configured, and Wan Ping is disabled.Yesterday I called D-Link support, and they asked me to update firmware (from 2.03 to 2.05). I did, but problem still here.Today I realized that there is a log section, and when I entered this is what I found?
View 3 Replies
View Related
Oct 14, 2009
Just bought a WRT400N and set it up using 5ghz and 2.4ghz bands, and using WPA TKIP for both. Problem is that both my laptop and my iphone occassionally lose connectivity and my iPhone says that my WPA key isn't valid.
View 4 Replies
View Related
Oct 28, 2011
I have the latest flash installed. I am making use of all the options available to this router. USB drive set up as a file server, both radio bands have devices which attach. All wifi security is wpa2 with a complex key string. Also have pc’s attached to all lan ports. I also have all the wireless devices registered on the mac address filter for access set to enable/allow. I have a total of 9 mac address in the list. One lan device is on the DMZ. One address is reserved. Not sure what other details you need.Router is used for online gaming, video streaming, and typical internet browsing.
View 1 Replies
View Related
Jun 14, 2012
My connection to Davis Instruments' WeatherLink had been working for many weeks, when my old WRT54G quite renewing DHCP leases. I've replaced it with a new E2000. All seems well. The Wifi network is working and my server resources to the outside are working. But the blasted WeatherLink software complains that it can't connect to to the interface box. This is a wired connection. The software finds the MAC address of the interface box and the assigned IP address, but "testing" the connection fails. I can ping the IP address of the interface box. The Davis people insist this is an issue with the router. The WeatherLink software uses a weird port: 22222 I didn't know there were ports with 5 digits. I've tried port forwarding this to the IP of the computer, but nothing changes. I think if I can ping the IP of the interface from the computer, communication should work.
View 1 Replies
View Related
Oct 11, 2011
I have a dual wan router with a main cable modem for high speed and a backup adsl modem hooked just in case. The problem is that quite often it seems that my ISP loose his connection to the internet but communication is not lost between my ISP and my modem and router. Because of this, my router doesn´t do the automatic changeover from my WAN 1 to my WAN 2 hooked slower ADSL modem. My router has the ping to keep alive option checked on the WAN 1 setings using my Cable ISP provided IP address.How can I force my router to notice that my cable ISP lost his connection to the internet and do right away the changeover from his WAN 1 to his WAN 2 input?
View 1 Replies
View Related
Jul 8, 2011
i bought a WRT160N router
I connected the Router to the modem, and all the wired connected PCs were working perfectly.But then, i went to the setup page to configure the Wireless settings, and as soon I changed the SSID name, the connection internet connection droppedThe only way i had to fix this was by making a Hard Reset.after that, I also tryed changing values and settings from all the configuration tabs, and the wired connection was working properly, but as soon i changed any value from the Wireless tab, the internet connection dropped (even, in the diagnostics section, i could not do a ping to google. It says unknown host).
View 3 Replies
View Related
Apr 30, 2012
I bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
View 2 Replies
View Related
May 28, 2012
I have an E1200 and am time out and packet loss issues. The internet connection is fine for 30 seconds to five minuets and then everything times out for 15-20 seconds. Although it’s only a minor incontinence to web browsing, it makes playing games and watching videos a nightmare. “Lost connection to server error.” and the like…
I upgraded to a new router, the e1200 I am currently using, from my Tenda 10/100 N. The problems where the same that I am experience currently and the reason I bought it in the firs place.When I directly connect to the cable modem, I have no issues and everything is fine.I have run a trace route and the second hop, (the router to the modem) is the choke point.I have cloned the MAC address.I have updated the firmware and hard reset
I have throttled my MTU to automatic, 1500, and 1472. None making any difference.I have disabled NAT and all that does is kill my internet connection.I have disabled all firewalls router and windows, no change.I replaced the physical wire from the router to the modem.I have disconnected all devices except one computer, and no difference.I ran a DNS trace and I have… non routable local internet address 192.168.1.1 DNS-cac-lb-01.rr.com and DNS-cac-lb-02.rr.com.I am using windows 7 and my ISP is time Warner so-cal.
View 8 Replies
View Related
Dec 28, 2011
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
View 1 Replies
View Related
Aug 16, 2012
I purchased the AE3000 Wireless Adapter for my PC, and has been working fine until now. When I first start my PC, my ping starts anywhere between 20-80, then after I try to access anything on the internet it shoots up between 600-1200. It just started happening about 3 days ago, but now it has gotten worse. I can't play any online games, and websites are slow to load.
View 1 Replies
View Related
Mar 6, 2013
Up until 2 days ago I've had no problems with my v1 running 1.0.05. I was copying something to my drive and the connection became non-existent. Going into the menus it shows my drive as having full capacity available. Well i konw thats not true. i unplugged it and directly connected it to a PC. All of my info was there. I connected it back to the router and nothing. No shares of any sorts. It shows it detected the drive. Does not show USB speed and does not allow you to create new shares.
View 1 Replies
View Related
Jun 30, 2011
We have the Linksys WRT150N router. A while ago it suddenly lost the name we gave it when we set it up and now it shows up as Linksys. Also, it is no longer secure, and sometimes we can't even see our network - it isn't even listed. How do I go in and change this? Will I have to reset the wireless information on my printer, etc?
View 4 Replies
View Related
Aug 23, 2011
My network keeps losing the lock icon that displays with the network name. I think this is happening with power shortages or outages. I have checked the settings online and it says WPA Preshared Key. Is the network still secure? I have a WRT54G wireless router.
View 1 Replies
View Related
