Linksys Wireless Adapters :: Lost Set Up Cd For WUSB54Gv2
Jul 3, 2011I lost the set up cd for my linksky WUSB54Gv2 Adapter how can I get a replacement disc.
View 1 RepliesI lost the set up cd for my linksky WUSB54Gv2 Adapter how can I get a replacement disc.
View 1 Repliesi tried down loading drivers but computer still says needs cd.
View 4 Replies View RelatedI recently reformatted my HD and when i went to install my wireless adapter i realized i had lost my Install CD for my WUSB54G Ver. 4 USB wireless adapter. Is there anywhere to download the install program?(i'm running windows xp)
View 4 Replies View RelatedI am trying to connect to the internet a second, older tower using the WUSB600N ver 2 adapter, the unfortunate part is that I have lost my CD's that originally came with the adapter. I am on my primary machine right now so I am able to get online. I am wondering if there is a way that I can get the proper drivers or software, put them on a USB drive and then put them on the computer that I am trying to connect?I have already tried this, but I cannot seem to get the steps right or I don't necessarily know what I am doing. I am at the Linksys support Page [URL] and I have tried to do as I mentioned before, but I am sort of just expecting it to GO and its not working. The computer i would like to make the WUSB600N adapter for is running windows XP pro Service Pack 3?
View 1 Replies View RelatedI have the problem that my WUSB600N loses the connection to the internet after a few minutes. I boot the system and the wireless stick run impeccable. After a few minutes the windows 7 network icon show me a yellow exclamation mark and no more internet access is possible. When I unplug the WUSB600N from the system und plug it on again the internet connection is possible again and run then over houres without a problem.
View 8 Replies View RelatedI have been using the WUSB54GSC for several years with no issues until a few months ago. Periodically, it will lose connection to the network. It shows it is connected, but I can not ping the router or do anything else unless I reboot the computer. Thinking it was the WUSB54GSC (I had the Ver 1) I got a new one (a Ver 2). Same thing except now it seems to be happening more frequently (one time, less than an hour after rebooting). I have moved it to other USB ports, uninstalled and reinstalled it, everything I can think of.
View 1 Replies View RelatedCannot find 64 bit driver for linksys wusb54gv2
View 3 Replies View RelatedWe have a Linksys wireless router and have lost the WEP KEY. How can we determine what it is?
View 1 Replies View RelatedI have lost the start-up cd for my router, where to find a downloadable one so i can hook up my router.
View 1 Replies View RelatedI lost my installation CD and now I moved to a new place. I have linksys wireless-G router model-wrt54gs. how can i setup a new wireless now?
View 5 Replies View RelatedI have been having trouble with my wireless router for the past month and not sure what is up with it. I have recently moved and got it working for a day then the wireless did not work and i was not able to access the setup webpage either. What I ended up doing was upgrade the firmware to the newest one and it worked well for about 2 weeks but then started again and the only way it works is to reboot the router but then the next day it will not work.
View 3 Replies View RelatedI lost my cd for my router e3000 any way still to use it?
View 1 Replies View RelatedI am now using a neighbor's wi-fi connection because my computer doesn't allow me access to my wif-fi.My server once entered my computer and since then I think it changed my key code.I get as far as the window for 192.188.1.1 and when I type admin it says denied. Very frustrating because my cell phone is now off my neighbor's wi-fi and my kindle lost the connection to downloadI was on the live chat and paid Linksys
View 5 Replies View Relatedmy compaq presario CQ50 suddenly will not connect to internet.my router is a linksys WRT54G.
View 2 Replies View Relatedis there anyplace to download the software or a linksys wrt54g wireless
View 1 Replies View RelatedThe only way I could get my EA6500 to work as auto DHCP to my Roadrunner Motorola SBV5220 Surfboard cable modem was to disable IPv6 support on the router. It appears that the EA6500 attempts to issue the DHCP request for address assignment from the modem using IPv6. I could see the status of "Connecting" for IPv6 in the Diagnosis Reports and it would hang. Once I disabled IPv6, the modem assigned an IPv4 address and everything worked fine. However, am I giving up any functionality by having to do this? I bought this router and the WUMC710 Universal Media Connector for the 5GHz connectivity for streaming and just wondered if I'm impacting UMC performance or any other functions of the router by having to disable IPv6.
View 1 Replies View RelatedMy harddrive failed. I got a new one and need to connect to my home network, but don't remember the user name or password for the router. I no longer have the setup cd. How do I reset the router and set up the entire home network again without the cd?
View 2 Replies View RelatedMy E3000 has been running for months without a hitch. Last night, it lost connectivity on the 2.4 GHz. I can connect on my laptop (Dell, XP) on the wireless 5 Ghz only. Wired connections (2 PCs and one video device) connect fine. All wireless equipment (laptops and LG DVD device needing 2.4 GHz) see the 2.4 GHz with good signal but will not connect. Of course, I rechecked name and passwords.
I tried the MSR restart and reboot several times, including turning things off overnight. Checked to be sure settings were not corrupted in setup.E3000 running firmware 1.0.04.
I been using my WRT54G with no problems for 2 years now. I lost wireless. I have 1 pc wired to the router and it works fine, e-mail, accessing the internet, everything. But I have 6 wireless devices ( 2 PCs, a printer, Nintindo 3Ds, a laptop and a nook) that use the wireless part of the router at different times. Anyways, last night, one of the wireless PCs lost connection, not seeing the router. Then I checked with each of the other wireless devices. None of them see the router. I tried many different things: powering down the router for two hours, hitting the reset button for 30 seconds, I even uninstalled the router and re-installed it and ran the setup-wizard. Again the pc I have wired to the router works but none of the wireless devices can see the router.
View 1 Replies View RelatedMy wife accidently reset the password on our E4200 wireless router and did not write it down. I have tried to reset the router as well as run the set up CD - no luck. How can I recover and get my wireless network back in operation?
View 1 Replies View Relatedmy linksys wireless wmp54gs pci card software disk is lost how can i download software for computer for device to work
View 3 Replies View RelatedThe problem: running a standard single band 2.4gz BT homehub. When using my xbox and wireless headset (razer chimeara) the xbox loses connection. When i tuen the headset off i no longer lose connection. This suggests to me that the headset is simply emitting on the same frequency and bullying the connection, thus the xbox disconnects I have purchased the wireless N adapter to allow the xbox to run on the 2.4 or 5ghz band. I am now looking for a duel band router to allow my xbox to connect to the 5gz band and hopefully this will rectify my interference issue with the headset. I have been lookijg at the e4200 as this supports seperate ssid for 2.4 and 5ghz band, so the xbox can run on the 5ghz and the intererence from the 2.4ghz headset should subside - do you think this would work? Also, with the single ssid duel band routers, where 2.4/5gjz share the same ssid - how would my wireless N devices know to run on the 5ghz and not the 2.4?
View 3 Replies View RelatedI have a cisco E2000 wireless router and have lost my wep password . How can I get around this
View 1 Replies View RelatedI upgraded my Mac OS to 10.7 (lion). I can no longer use Cisco Connect. I cannot recall the password I created when using Cisco Connect prior to upgrading to Lion. Is there any way to determine or reset my password without Cisco Connect. And why is it taking Cisco so long to provide firmware that works with Mac OS 10.7?
View 3 Replies View RelatedI have a WRT120N router up and running in my home. I had the software (Network Magic) that came with the router installed on my old laptop. The hard drive died on the laptop and now I cannot seem to find the CD. When can I find an online download for the software?
View 1 Replies View RelatedI lost my power adapter for the WRT54G router. I have a 12V / 1000 mA brick adapter.
View 5 Replies View RelatedI'm not a very knowledgeable person when it comes to networking stuff so ill try and explain this the best I can.I have a Cisco router the number on it is EPC2425.I set a user name and password I've long forgotten for access to the web based security protocols for the modem and if there was one I've lost the disk for the control protocol program.I need to get to the port forwarding a such on there and I have no way to a present.
View 4 Replies View RelatedI haven't used my Linksys WRT54G v5 wireless router for about 1 1/2 years and needed it now at a new place.I set a user name and password I've long forgotten for access to the web based security protocols for the modem and I've lost the disk for the control protocol program.I tried pressing the reset button to clear the modem and it took the WPA protocol off the modem so I can use it without any security but that's not a good thing.How do I get it freed up so I can get to the security protocols and put security back on my modem?
View 9 Replies View RelatedMy router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
I bought a Linksys-Cisco wireless G Broadband Router model # WRT54G2 some time ago, and I never installed it. Now I cannot find the set up CD-ROM or the user guide CD-ROM. Is there a way to down load these from the product site...
View 9 Replies View RelatedI switch on router and connect my iPad on router linksys cisco e2000. During 10 minutes, There is no problem. After 10 minutes, I have always the connection with my router but no internet. To Avoid this problem, i restart the router with switch and after, no problem. Do you have any ideas to avoid this lost connection after 10 minutes when I switch on my router.
View 2 Replies View RelatedI have lost my installation disk for my WRT54G Version 8. Where I can download the drivers and installation.
View 9 Replies View RelatedI have E4200 v1 with 1.0.3 firmware and an old 2.5"/120GB hard drive. Today I discovered that all my data where lost. They were there not longer than a couple of days ago. I'm almost sure it's not my fault and the drive is healty. I'm now moving back datas onto it and I will check for them daily.
1) I had no power loss;
2) I didn't reboot nor I didn't switch it off/on;
3) I didn't copied files since days;
4) The last time I used it I just browsed files;
5) It's not exposed to the internet but just to local network;
6) The router hasn't logged admin logon other than from my computers.