I switch on router and connect my iPad on router linksys cisco e2000. During 10 minutes, There is no problem. After 10 minutes, I have always the connection with my router but no internet. To Avoid this problem, i restart the router with switch and after, no problem. Do you have any ideas to avoid this lost connection after 10 minutes when I switch on my router.
View 2 RepliesMy connection to Davis Instruments' WeatherLink had been working for many weeks, when my old WRT54G quite renewing DHCP leases. I've replaced it with a new E2000. All seems well. The Wifi network is working and my server resources to the outside are working. But the blasted WeatherLink software complains that it can't connect to to the interface box. This is a wired connection. The software finds the MAC address of the interface box and the assigned IP address, but "testing" the connection fails. I can ping the IP address of the interface box. The Davis people insist this is an issue with the router. The WeatherLink software uses a weird port: 22222 I didn't know there were ports with 5 digits. I've tried port forwarding this to the IP of the computer, but nothing changes. I think if I can ping the IP of the interface from the computer, communication should work.
View 1 Replies View RelatedI have the problem that my WUSB600N loses the connection to the internet after a few minutes. I boot the system and the wireless stick run impeccable. After a few minutes the windows 7 network icon show me a yellow exclamation mark and no more internet access is possible. When I unplug the WUSB600N from the system und plug it on again the internet connection is possible again and run then over houres without a problem.
View 8 Replies View RelatedI have a cisco E2000 wireless router and have lost my wep password . How can I get around this
View 1 Replies View RelatedAlright, the computer I had cisco connect on crashed. I got a new computer and I'm trying to install Cisco connect using the downloaded version and I can't install it because it requests the password of the router, which i do not know. This is because I've lost the CD copy of Cisco connect. I've tried resetting the router itself by pressing the red reset button
View 5 Replies View RelatedI bought a DIR-600 a couple of months ago. Days later started experiencing problems, connection would drop, and only way to restore connection was to reset the router.It has its password configured, a secure wireless connection also configured, and Wan Ping is disabled.Yesterday I called D-Link support, and they asked me to update firmware (from 2.03 to 2.05). I did, but problem still here.Today I realized that there is a log section, and when I entered this is what I found?
View 3 Replies View RelatedI am using a E2000 connected to a DSL modem via the internet port. My modem is able to connect at gigabit speed but it doesn't seem to be the case with the E2000. All other ports are running at gigabit speed without problem. Is there any parameter that can be modified or is it a router limit?
View 2 Replies View RelatedI recently purchased a Mac and wanted to reset my wireless router and set it up using my mac. However, when I downoaded the software to set it up again, it said it was not compatable with my Mac OS (X Lion 10.7.4). I am sure there is a way to manually set it up via an ethernet connection, but I am at a loss as to how to do that. The wireless router is working just fine, I am able to connect to the internet wirelessly and there's nothing wrong with my internet service, however the wireless router is not secured.I have my Mac connected to the wireles router via an ethernet cord.
View 1 Replies View Relatedi want to set up a vpn connection to my home network. i see that the e2000 supports ipsec, but does not provide a client. what client can i use to establish a connection?
View 4 Replies View RelatedI have 300 Mb/s plan from ISP. Then cable connected directly to PC my throughput is as it should be, but then i do connect my PC via E2000 cable connection, it slows down to 200Mb/s. I have tryied also E4200 model and i have same issue.
View 1 Replies View RelatedInternet was working great a few days ago with my e2000 and comcast as my ISP. I've got a few devices connected through ethernet connections on the unit. We also connect to the e2000 wirelessly.Problems started yesterday with no internet. Last night I rebooted everything and still nothing works. Connected laptop to cable modem directly. Wasn't getting internet connectivity so I called Comcast. They reset my modem and everything started working fine. Now I can directly connect from cable modem to laptop and internet works fine. I try connecting the modem to the router and still no internet.
View 2 Replies View RelatedI recently downloaded Deluge and while I can download torrents without a problem, I always have the "NO INCOMING CONNECTIONS' warning. I've tried single port forwarding, port range forwarding, turning UPnP off and on ... in short I've tried a lot of stuff and the only thing that clears the message is to remove the router out of the equation. The message disappears as soon as I connect the pc directly to the modem.
View 3 Replies View RelatedI use to use 2 routers, one for me and my dad, another for my brother and sister. We decided to get rid of the other router, and make our cisco E2000 our main router, but, everything on the router settings got removed so we had to reset it up. I remember reading an advanced setting guide on making my wireless speed go from 13.5MBPS to 216 MBPS, but i forgot what the settings was in advance settings.
View 7 Replies View RelatedI bought a brand spanking new Linksys E2000. I get great connection speeds and awesome range, until the day I set up parental controls. Once I set them up, It slowed my connections down to a crawl. Thinking that I did something wrong, I reset the router and did the entire installation. Everything was back to normal, but it did it again once I set up the parental controls.
View 9 Replies View RelatedI been using my WRT54G with no problems for 2 years now. I lost wireless. I have 1 pc wired to the router and it works fine, e-mail, accessing the internet, everything. But I have 6 wireless devices ( 2 PCs, a printer, Nintindo 3Ds, a laptop and a nook) that use the wireless part of the router at different times. Anyways, last night, one of the wireless PCs lost connection, not seeing the router. Then I checked with each of the other wireless devices. None of them see the router. I tried many different things: powering down the router for two hours, hitting the reset button for 30 seconds, I even uninstalled the router and re-installed it and ran the setup-wizard. Again the pc I have wired to the router works but none of the wireless devices can see the router.
View 1 Replies View RelatedThe problem: running a standard single band 2.4gz BT homehub. When using my xbox and wireless headset (razer chimeara) the xbox loses connection. When i tuen the headset off i no longer lose connection. This suggests to me that the headset is simply emitting on the same frequency and bullying the connection, thus the xbox disconnects I have purchased the wireless N adapter to allow the xbox to run on the 2.4 or 5ghz band. I am now looking for a duel band router to allow my xbox to connect to the 5gz band and hopefully this will rectify my interference issue with the headset. I have been lookijg at the e4200 as this supports seperate ssid for 2.4 and 5ghz band, so the xbox can run on the 5ghz and the intererence from the 2.4ghz headset should subside - do you think this would work? Also, with the single ssid duel band routers, where 2.4/5gjz share the same ssid - how would my wireless N devices know to run on the 5ghz and not the 2.4?
View 3 Replies View RelatedMy router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
I have a Mac laptop. Verizon ISP.
I used the CD to set up my new EA3500 with my Wild Blue Satellite internet modem.An IPhone or IPad can connect and work like a charm, remaining rock solid at all times. Windows 7 on the other hand, will work and then lose connection to the internet. The PC appears to remain connected to the EA3500, but the connection between the EA3500 and modem appear to be lost. I can click on the bar Icon at the bottom and it shows everything to be fine. I click on disconnect and then wait a few seconds and click on connect again and it works for a few minutes before having to do it again. When I look at the router properties the CD set it up for DHCP.
View 2 Replies View RelatedJust bought a WRT400N and set it up using 5ghz and 2.4ghz bands, and using WPA TKIP for both. Problem is that both my laptop and my iphone occassionally lose connectivity and my iPhone says that my WPA key isn't valid.
View 4 Replies View RelatedI have the latest flash installed. I am making use of all the options available to this router. USB drive set up as a file server, both radio bands have devices which attach. All wifi security is wpa2 with a complex key string. Also have pc’s attached to all lan ports. I also have all the wireless devices registered on the mac address filter for access set to enable/allow. I have a total of 9 mac address in the list. One lan device is on the DMZ. One address is reserved. Not sure what other details you need.Router is used for online gaming, video streaming, and typical internet browsing.
View 1 Replies View RelatedI have been using the WUSB54GSC for several years with no issues until a few months ago. Periodically, it will lose connection to the network. It shows it is connected, but I can not ping the router or do anything else unless I reboot the computer. Thinking it was the WUSB54GSC (I had the Ver 1) I got a new one (a Ver 2). Same thing except now it seems to be happening more frequently (one time, less than an hour after rebooting). I have moved it to other USB ports, uninstalled and reinstalled it, everything I can think of.
View 1 Replies View Relatedi bought a WRT160N router
I connected the Router to the modem, and all the wired connected PCs were working perfectly.But then, i went to the setup page to configure the Wireless settings, and as soon I changed the SSID name, the connection internet connection droppedThe only way i had to fix this was by making a Hard Reset.after that, I also tryed changing values and settings from all the configuration tabs, and the wired connection was working properly, but as soon i changed any value from the Wireless tab, the internet connection dropped (even, in the diagnostics section, i could not do a ping to google. It says unknown host).
I bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
View 2 Replies View RelatedI have an E1200 and am time out and packet loss issues. The internet connection is fine for 30 seconds to five minuets and then everything times out for 15-20 seconds. Although it’s only a minor incontinence to web browsing, it makes playing games and watching videos a nightmare. “Lost connection to server error.” and the like…
I upgraded to a new router, the e1200 I am currently using, from my Tenda 10/100 N. The problems where the same that I am experience currently and the reason I bought it in the firs place.When I directly connect to the cable modem, I have no issues and everything is fine.I have run a trace route and the second hop, (the router to the modem) is the choke point.I have cloned the MAC address.I have updated the firmware and hard reset
I have throttled my MTU to automatic, 1500, and 1472. None making any difference.I have disabled NAT and all that does is kill my internet connection.I have disabled all firewalls router and windows, no change.I replaced the physical wire from the router to the modem.I have disconnected all devices except one computer, and no difference.I ran a DNS trace and I have… non routable local internet address 192.168.1.1 DNS-cac-lb-01.rr.com and DNS-cac-lb-02.rr.com.I am using windows 7 and my ISP is time Warner so-cal.
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
View 1 Replies View RelatedI can't win. After dealing with the internet dropping once every two weeks, I decided that upgrading the firmware might work. Turns it all it did was exacerbate the problem and now my internet drops every few minutes. I've been plugged into my modem for a good 20 minutes at this point with no drops. Has my router just shit the bed or can this be fixed?
View 8 Replies View RelatedI have the AE1000 adaptor on my wife's computer and direct wired on mine is the E2000.The e2000 is set to 2.4mhz and when connected to the wireless network, my wifes ae1000 shows it is connected at 144mbps.When I change the e2000 to 5.0 mhz and then my wife connects to the internet, she shows the ae1000 at 16-53 mbps. When I switch back to 2.4 she shows 144. I thought that when the e2000 is connected at 5.0 she should have a "faster connection".
View 1 Replies View RelatedI went through the hoops with my ISP (knology) and they are adamant that it is the router that is the problem. I've tried two different routers, an E2000 and a wrt120n (it may be 160n..).. both do the same exact thing. I'm extremely tired of it. I was told it could be an IP issue or something related to DHCP.
Modem:
System: ARRIS DOCSIS 2.0 / SIP 2.0 Touchstone Telephony Modem HW_REV: 04
VENDOR: Arris Interactive, L.L.C.
BOOTR: 6.24
SW_REV: 6.1.77T.SIP
MODEL: TM602G
Router: E2000
Problem: Internet 'lags out' every 10-15 minutes for approximately 3-10 seconds. It only does this when I'm connected through the router and never when I'm plugged directly into the modem. It happens most commonly when my brother and I are both online at the same time. It's rare when we only one of us is online.
[URL]
my compaq presario CQ50 suddenly will not connect to internet.my router is a linksys WRT54G.
View 2 Replies View RelatedAs mentioned in my topic title, I am losing my internet connection every 14.75 minutes for about 10 seconds at a time. I've tried another website (Tech Guy Support networking forum) and I've come to a dead end. I though maybe that a site more dedicated to networking. but in the interest of saving time and making sure I've got everything formatted correctly, I have a few pictures that will clarify what is going on as well.
I'm at wit's end with diagnosing the problem and I don't know what else to try to get my network to stop acting up. Finally, here is my detailed problem and all the steps I've taken to troubleshoot the network. [URL]. Here is a picture of my network setup for those who want to jump to a picture: [URL]
I can connect to my router but either way it seems like i can't get any internet access (both wireless and by cable): url...I have tried the steps that the linksys FAQ suggests shall fix this problem, but this has not worked. I have also tried to reset the router without any luck. I know it its not the modem that is causing the problem because I'm wired to it now.On the E2000 every light is blinking as it should be (hence the FAQ) so it indicates that there might be a problem with the connection between the router and the computer (tested on other computers too without success).
View 9 Replies View RelatedI am using Cisco E1000. since 1.5 years I am using the internet through this router. Past1 week i am geeting freeqent disconnecting of my internet (for all systems & devices). I am using DHCP connection with static IP.
View 9 Replies View Related