Linksys Wireless Router :: WRT600N Lost Internet Connection On Reboot
Oct 28, 2011
I have the latest flash installed. I am making use of all the options available to this router. USB drive set up as a file server, both radio bands have devices which attach. All wifi security is wpa2 with a complex key string. Also have pc’s attached to all lan ports. I also have all the wireless devices registered on the mac address filter for access set to enable/allow. I have a total of 9 mac address in the list. One lan device is on the DMZ. One address is reserved. Not sure what other details you need.Router is used for online gaming, video streaming, and typical internet browsing.
View 1 Replies
ADVERTISEMENT
Jul 30, 2011
I have a Telus modem, that is hard wired to a siemens wireless router.The telus modem assigns addresses to the siemens router in 192.168.254.* address range.There are a lot of other siemens routers operating in my neighbourhood and I keep getting kicked off.So I want to connect my MacBook Pro wirlessly through the linksys WRT600N on the 5GHz band.I've disabled the 2.4Ghz band.
[code]....
View 1 Replies
View Related
Jul 23, 2012
I am using a linksys wrt600N with easylink advisor version 1.6.0042. I am trying to install a video camera and the instruction manual says under "known issues": LinkSys routers have a factory default setting in the firewall menu called "filter anonymous internet requests". If you want to access your camera from the internet you have to uncheck this option."I see this option in the WRT600N manual, but it references a software choice that I don't have.I have gone to the website and downloaded the latest compatible software version, and I still don't have the choice to uncheck this option.
View 2 Replies
View Related
Jan 1, 2013
i have a cisco 1900 series router from the isp and we connect it the our router the rv042 small biz, and we have here a cisco catalyst 2950 switch with just default configuration connected to the hosts.
my problem is from time to time that the connection is lost there is no connection with the router and the only solution is to turn off and on the cisco 1900 router and the connection will be back.
do we need to configure the routers and switches? what do you need to configure?
View 2 Replies
View Related
Jul 8, 2011
i bought a WRT160N router
I connected the Router to the modem, and all the wired connected PCs were working perfectly.But then, i went to the setup page to configure the Wireless settings, and as soon I changed the SSID name, the connection internet connection droppedThe only way i had to fix this was by making a Hard Reset.after that, I also tryed changing values and settings from all the configuration tabs, and the wired connection was working properly, but as soon i changed any value from the Wireless tab, the internet connection dropped (even, in the diagnostics section, i could not do a ping to google. It says unknown host).
View 3 Replies
View Related
Jan 23, 2013
my compaq presario CQ50 suddenly will not connect to internet.my router is a linksys WRT54G.
View 2 Replies
View Related
Apr 19, 2010
When connecting wirelessly (5GHz) to the E3000 after a day or so the wireless connection starts loosing speed. I have Comcast and usually get 20-30 MB download connections. After a day or so I start to lose speed (down to 5MB) until I reboot the E3000. Then I resume 20-30MB download connections. My wired connections appear fine and don’t experience the slow down. I'm doing my speed test with [URL]
The wireless slow down seems similar to the old memory leak condition of old Windows OS’s. Called Cisco and they don’t have an idea. They had me change a few settings (channel info) but I’m pretty technical and don’t feel that will fix it.
View 9 Replies
View Related
Aug 30, 2012
I have a WRT600N dual band router and have only been able to connect to the 5Ghz when it's network mode was set to mixed. I also have a Dell Wireless 1505 Draft 802.11n WLAN Mini-Card. When setting the Network mode on my router to Wireless N-Only I am unable to connect to the network. I have been searching all over the internet for how to fix this, but none of the answers suit me. I have my network security set to WPA2 with an AES encryption, like people keep saying so I know that is not the problem. Others say that I need to set my wireless adapter to N-Only as well, but I have not been able to find anything in Google that shows me how this is done. The driver version for my adapter is 5.60.48.18 and is up to date according to Windows.
View 9 Replies
View Related
Jul 14, 2011
I have been using a Lenovo W510 laptop with an Intel wireless adapter (Intel(R) Centrino(R) Ultimate-N 6300 AGN). The download speed has been 15-18 mbps on my home network. I just bought a new Lenovo W520 with a Lenovo wireless adapter. The download speed is about 1 to 1.5 mbps. What changes should I make to the router settings so that it communicates properly with the Lenovo wireless adapter?
View 9 Replies
View Related
Oct 30, 2011
I'm having problems with the access restrictions feature on the WRT600N. I do have the latest firmware upgrade, which was released in 2008 I believe. Anyways whenever I totally block a PC from the internet either by MAC or by IP, it affects the internet on the rest of the house. Logins to sites do not work right. Logouts from do not work right. Different features of different sites will not work properly. There also will be a lag sometimes when entering the url for a new site. But as soon as I turn the access restriction off, everything goes immediately back to how it should be working.
View 3 Replies
View Related
Jun 1, 2012
I have a WRT600N router. I have one PC that is connected to the router via a wired connection. I also have an iPad (3rd generation) that is connected to the router via a wireless connection. On my PC, I went to speedtest.net and determined that I am receiving like 20MB downloads via the wired connection. However, my iPad only gets approximately less than 2 MB download speeds. I have tried reseting the router and I do have what I believe to be the latest firmware update (Firmware Version: 1.01.36 build 4). I also receive the slow download speeds when I try connecting the other wireless devices. I assume my problem has to do with some sort of configuration setting found in the router configuration page (http://192.168.1.1/). The router is only a few feet away from my iPad so the signal strength is strong. I just don't understand why I'm receiving such slow wireless download speeds.
View 9 Replies
View Related
Jan 21, 2011
I cannot upload files through http (e-mail attachments, send images to Facebook, send file to virustotal.com) with Linksys WRT600N router. When I remove connection cable from router and place directly in a computer, everything works just fine. I am using last firmware upgrade.
View 2 Replies
View Related
Sep 16, 2011
I fought my ISP (frontier) for weeks trying to get their 7500 DSL/modem/router configured in bridge and working into the WRT600N. Finally gave up and put a new Engenius EVR100 behind the 7500 bridge and it came up fine in 10 mins. Now I would like to use my old WRT600N downstairs as a second router and run it in the range of the Engenius DHCP, with DHCP turned off in the WRT600N.
My question is this ... Do I set the WRT600N as a static IP address and use an address in the range issued by the EVR100?And, if so, what would the sub-net mask, default gateway and DNS numbers be? Also would the router address itself (lets say I use 192.168.0.120 from the EVR100 range) be different then the static IP address?
View 1 Replies
View Related
Mar 24, 2012
Where can I download the latest firmware for my wrt600n?
View 1 Replies
View Related
Aug 16, 2011
My DSL Modem connected right now to Linksys Model: WRT600N (Dual Band Wireless-N Gigabit Router) to give a wireless internet access in my house. I have TWO spare Linksys Wireless Router (WRT350N-Wireless-N Gigabit Router) and (WRT54G2-Wireless-G Broadband Router) that I need to use to expand my wireless network at home.
How can i connect the two routers to became an access point or range expander to existing router. It is possible the two spare routers became an access pt or expander? How can i configure that? Cable configuration?
View 1 Replies
View Related
Sep 27, 2010
When the Wrt600N came out, it was said that the "Reserved" button would be enabled by a future firmware upgrade to support WiFi Protected Setup. Surely in the three or so years this has come to pass.Does anyone have a link to information on using WPS with the WRT600n?
View 5 Replies
View Related
Aug 19, 2011
I been using my WRT54G with no problems for 2 years now. I lost wireless. I have 1 pc wired to the router and it works fine, e-mail, accessing the internet, everything. But I have 6 wireless devices ( 2 PCs, a printer, Nintindo 3Ds, a laptop and a nook) that use the wireless part of the router at different times. Anyways, last night, one of the wireless PCs lost connection, not seeing the router. Then I checked with each of the other wireless devices. None of them see the router. I tried many different things: powering down the router for two hours, hitting the reset button for 30 seconds, I even uninstalled the router and re-installed it and ran the setup-wizard. Again the pc I have wired to the router works but none of the wireless devices can see the router.
View 1 Replies
View Related
Jul 27, 2012
My E3200 (firmware 1.0.04) loses access to internet every week or so and OK again when reboot.
View 6 Replies
View Related
Apr 6, 2012
The standard Verizon router doesn't have Wireless N capability, so I got the WRT600N (first floor) a while back and connected it to one of the ports on the Verizon router (basement). I have the wireless turned off on Verizon router. My problem is that anything connecting to the WRT600N has extremely intermittent connectivity.
View 1 Replies
View Related
Oct 17, 2008
Ok, so I reset the router but i still can't login to the setup using the factory password (admin/admin) (blank/admin) (admin/blank). Now I have an unencrypted network and no access to the setup... I even tried using the setup CD but it doesn't recognize the router.
View 2 Replies
View Related
Dec 27, 2011
The problem: running a standard single band 2.4gz BT homehub. When using my xbox and wireless headset (razer chimeara) the xbox loses connection. When i tuen the headset off i no longer lose connection. This suggests to me that the headset is simply emitting on the same frequency and bullying the connection, thus the xbox disconnects I have purchased the wireless N adapter to allow the xbox to run on the 2.4 or 5ghz band. I am now looking for a duel band router to allow my xbox to connect to the 5gz band and hopefully this will rectify my interference issue with the headset. I have been lookijg at the e4200 as this supports seperate ssid for 2.4 and 5ghz band, so the xbox can run on the 5ghz and the intererence from the 2.4ghz headset should subside - do you think this would work? Also, with the single ssid duel band routers, where 2.4/5gjz share the same ssid - how would my wireless N devices know to run on the 5ghz and not the 2.4?
View 3 Replies
View Related
Jul 20, 2011
My router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
View 2 Replies
View Related
May 5, 2012
I switch on router and connect my iPad on router linksys cisco e2000. During 10 minutes, There is no problem. After 10 minutes, I have always the connection with my router but no internet. To Avoid this problem, i restart the router with switch and after, no problem. Do you have any ideas to avoid this lost connection after 10 minutes when I switch on my router.
View 2 Replies
View Related
Apr 29, 2012
My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
I have a Mac laptop. Verizon ISP.
View 2 Replies
View Related
Sep 2, 2012
I used the CD to set up my new EA3500 with my Wild Blue Satellite internet modem.An IPhone or IPad can connect and work like a charm, remaining rock solid at all times. Windows 7 on the other hand, will work and then lose connection to the internet. The PC appears to remain connected to the EA3500, but the connection between the EA3500 and modem appear to be lost. I can click on the bar Icon at the bottom and it shows everything to be fine. I click on disconnect and then wait a few seconds and click on connect again and it works for a few minutes before having to do it again. When I look at the router properties the CD set it up for DHCP.
View 2 Replies
View Related
Oct 14, 2009
Just bought a WRT400N and set it up using 5ghz and 2.4ghz bands, and using WPA TKIP for both. Problem is that both my laptop and my iphone occassionally lose connectivity and my iPhone says that my WPA key isn't valid.
View 4 Replies
View Related
Jun 14, 2012
My connection to Davis Instruments' WeatherLink had been working for many weeks, when my old WRT54G quite renewing DHCP leases. I've replaced it with a new E2000. All seems well. The Wifi network is working and my server resources to the outside are working. But the blasted WeatherLink software complains that it can't connect to to the interface box. This is a wired connection. The software finds the MAC address of the interface box and the assigned IP address, but "testing" the connection fails. I can ping the IP address of the interface box. The Davis people insist this is an issue with the router. The WeatherLink software uses a weird port: 22222 I didn't know there were ports with 5 digits. I've tried port forwarding this to the IP of the computer, but nothing changes. I think if I can ping the IP of the interface from the computer, communication should work.
View 1 Replies
View Related
Feb 6, 2012
I have 2 computers connected to the router (via cable). The problem is that have to reboot the router several times per day because one or both computers lose their internet connection. This happens regardless if one or two computers are turned on.
Router: DIR-615
Firmware version 4.00
Hardware version: D1
Computer1: Win7 64
Computer2: Win Vista 64
View 15 Replies
View Related
Mar 10, 2011
I have been using the WUSB54GSC for several years with no issues until a few months ago. Periodically, it will lose connection to the network. It shows it is connected, but I can not ping the router or do anything else unless I reboot the computer. Thinking it was the WUSB54GSC (I had the Ver 1) I got a new one (a Ver 2). Same thing except now it seems to be happening more frequently (one time, less than an hour after rebooting). I have moved it to other USB ports, uninstalled and reinstalled it, everything I can think of.
View 1 Replies
View Related
Apr 30, 2012
I bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
View 2 Replies
View Related
May 28, 2012
I have an E1200 and am time out and packet loss issues. The internet connection is fine for 30 seconds to five minuets and then everything times out for 15-20 seconds. Although it’s only a minor incontinence to web browsing, it makes playing games and watching videos a nightmare. “Lost connection to server error.” and the like…
I upgraded to a new router, the e1200 I am currently using, from my Tenda 10/100 N. The problems where the same that I am experience currently and the reason I bought it in the firs place.When I directly connect to the cable modem, I have no issues and everything is fine.I have run a trace route and the second hop, (the router to the modem) is the choke point.I have cloned the MAC address.I have updated the firmware and hard reset
I have throttled my MTU to automatic, 1500, and 1472. None making any difference.I have disabled NAT and all that does is kill my internet connection.I have disabled all firewalls router and windows, no change.I replaced the physical wire from the router to the modem.I have disconnected all devices except one computer, and no difference.I ran a DNS trace and I have… non routable local internet address 192.168.1.1 DNS-cac-lb-01.rr.com and DNS-cac-lb-02.rr.com.I am using windows 7 and my ISP is time Warner so-cal.
View 8 Replies
View Related
Dec 28, 2011
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
View 1 Replies
View Related
Dec 24, 2011
the modem is open.the router also is open but dont have internet access.
View 1 Replies
View Related
