D-Link DIR-600 :: Ping-flooded / Connection Lost Every 30 Minutes?
Dec 14, 2011
I bought a DIR-600 a couple of months ago. Days later started experiencing problems, connection would drop, and only way to restore connection was to reset the router.It has its password configured, a secure wireless connection also configured, and Wan Ping is disabled.Yesterday I called D-Link support, and they asked me to update firmware (from 2.03 to 2.05). I did, but problem still here.Today I realized that there is a log section, and when I entered this is what I found?
View 3 Replies
ADVERTISEMENT
May 5, 2012
I switch on router and connect my iPad on router linksys cisco e2000. During 10 minutes, There is no problem. After 10 minutes, I have always the connection with my router but no internet. To Avoid this problem, i restart the router with switch and after, no problem. Do you have any ideas to avoid this lost connection after 10 minutes when I switch on my router.
View 2 Replies
View Related
Oct 1, 2010
I have the problem that my WUSB600N loses the connection to the internet after a few minutes. I boot the system and the wireless stick run impeccable. After a few minutes the windows 7 network icon show me a yellow exclamation mark and no more internet access is possible. When I unplug the WUSB600N from the system und plug it on again the internet connection is possible again and run then over houres without a problem.
View 8 Replies
View Related
Nov 30, 2011
I just replaced my older D-Link with a DIR-601. I decided to try the email feature, so I set the option to "On Log Full". Within an hour I had 5 emails. I noticed that they were mostly entries reading "DIR-601 local0.debug udhcpd[18594]: UDHCPD Received a SIGUSR1". The "Debug Information" option isn't checked.
View 1 Replies
View Related
Oct 11, 2011
I have a dual wan router with a main cable modem for high speed and a backup adsl modem hooked just in case. The problem is that quite often it seems that my ISP loose his connection to the internet but communication is not lost between my ISP and my modem and router. Because of this, my router doesn´t do the automatic changeover from my WAN 1 to my WAN 2 hooked slower ADSL modem. My router has the ping to keep alive option checked on the WAN 1 setings using my Cable ISP provided IP address.How can I force my router to notice that my cable ISP lost his connection to the internet and do right away the changeover from his WAN 1 to his WAN 2 input?
View 1 Replies
View Related
Mar 10, 2011
I have been using the WUSB54GSC for several years with no issues until a few months ago. Periodically, it will lose connection to the network. It shows it is connected, but I can not ping the router or do anything else unless I reboot the computer. Thinking it was the WUSB54GSC (I had the Ver 1) I got a new one (a Ver 2). Same thing except now it seems to be happening more frequently (one time, less than an hour after rebooting). I have moved it to other USB ports, uninstalled and reinstalled it, everything I can think of.
View 1 Replies
View Related
Jul 16, 2010
I have a DIR-615, hardware version: C1, firmware version 3.12NA and my issue is that it keeps dropping my VPN connection after 12 minutes. Sometimes it'll go longer than 12 minutes but on average right at 12 minutes of my connection, it drops. This happens whether I'm using the wireless or hard wired to the router. As a test, I ran a continuous ping on a computer on my internal network and also to a computer on my corporate network. When I'm VPN'd in, both pings are successful. Once the router kills my VPN session, the pings to my internal network are successful. So the router isn't rebooting or anything like that. My VPN session will automatically reconnect, but I'm stumped.
View 14 Replies
View Related
Jun 16, 2010
I'm trying to hook up a dap-1522 to an SMC8014WG wireless router. All goes well for about 10 minutes then the SMC drops all wireless connections except the connection to the 1522, and loses internet connectivity.There are several other wireless devices connected to the SMC but none of them causes it to go down.
View 6 Replies
View Related
Mar 4, 2013
Not sure where the best place to drop this question. It is a DIR-601 router. I have it configured in the virtual servers list as; internal system ip, public port/private port both 23, protocal tcp with inbound filter, allow all and schedule set to always. I have a second system with a different public port. I can connect to either one but after a short amount of idle time it appears to just drop the connection.
View 4 Replies
View Related
Mar 2, 2011
As mentioned in my topic title, I am losing my internet connection every 14.75 minutes for about 10 seconds at a time. I've tried another website (Tech Guy Support networking forum) and I've come to a dead end. I though maybe that a site more dedicated to networking. but in the interest of saving time and making sure I've got everything formatted correctly, I have a few pictures that will clarify what is going on as well.
I'm at wit's end with diagnosing the problem and I don't know what else to try to get my network to stop acting up. Finally, here is my detailed problem and all the steps I've taken to troubleshoot the network. [URL]. Here is a picture of my network setup for those who want to jump to a picture: [URL]
View 19 Replies
View Related
Jul 21, 2011
Yesterday we had a very brief power outage and until then everything worked fine. Small business that runs modem - router - switch. Since the power outage I can only get internet if I run straight into the modem. As soon as I run from the modem to any (tried 3 different ones) router I lose internet. I get a wireless signal on my router. I've reset the router to default settings. I've plugged in another router to the modem to check and I don't get anything from that router either (which was not plugged in during the power outage).
View 1 Replies
View Related
Jan 31, 2011
I've got a bit of a weird situation here as soon as I switch on my desktop pc my wireless connection is lost. This is only the desktop pc, I aso have a HTPC on wire, this one doesn't have any problems. If my wireless fails, my wired clients can still go on the internet. (see for detail the drawing at the bottom of this post).
The other weird thing is as soon as I set my wireless to WPA-TKIP there are no problems, but my wireless is set to WPA-AES due to the wireless N standard.
I also noticed as soon as my wireless drops out the router starts changing channels.
Part of my network is DHCP (in the range of 192.168.0.100 - 192.168.0.199) the other part has fixed adresses (192.168.0.251, 192.168.0.253, 192.168.0.254)
What i've tried thusfar
- other firmware
- replaced cables
- rebooting/restarting router
- setting up from factory defaults
View 1 Replies
View Related
Jan 18, 2012
I am using InnoMedia MTA6328-1Be2S from Reliance and D-link DIR-600 for sharing internet connection. I have a strange problem here after using internet for sometime..I will not be able to use internet unless I shut down and restart both Innomedia and D-link.I tried changing configurations in D-link but with no luck. I lost the connection no matter I am using wireless or wired mode.I do not know how to login to InnoMedia MTA6328-1Be2S as well.
View 1 Replies
View Related
Jul 16, 2012
I'm using LMS 4.0, after I auto discovery device, I can see all of devices on my network but I cannot view the links connect between the ASR 9000 and Catalyst 6509. I've just checked cdp neighbor on these devices, I can see the full of neighbors.
I attach 2 file, with the visio topology and the topology view on LMS , and I'm 100% sure about the connections between these devices are used. I try to re-discovery many times but it not work correctly.
View 2 Replies
View Related
Sep 28, 2012
my ping spikes to 1k+ all the time, making online games pretty much unplayable. Sometimes I'll lag up to 3k ms and by the time my ping is back to normal, the game is so behind it is messed up forever.I've looked online for days trying to find solutions, and trying all kinds of things. The problem started after i reinstalled windows xp (it actually started right after my power flickered after i reinstalled, but i think that may be coincidence. I'm not sure though.). I've reformatted since then, but the problem still persists.I think the problem might be WZC, but when I try stopping the program like other people have done, my wireless network disconnects pretty soon after. I've also tried just using the intel software, but that didn't work either. It was fine for a while last night after I changed to the intel software, but after maybe an hour or so it went back to lagging.I have Intel PROSet Wifi agn 5100 as my network card. I'm on a laptop. I also tried doing a ping test in command on my mom's laptop, and it never spiked like mine. Is my network card maybe just too old? I got the laptop almost 4 years ago.
View 6 Replies
View Related
Oct 18, 2011
Since buying and using this router about 1 month ago, I've had latency problems. With my Linksys WRT54GL, my latency has always been consistent. However, pinging to google (as a benchmark), my ping is a good 50-70 higher than directly plugging into my router. Directly into my modem I get 10-20ms pings; through the router, I get minimum 60ms up to 100ms spikes. When using the Linksys router, my ping would be 20-30s. I really hope it's just a settings problem. I've turned off QoS and wireless to isolate the connection to just wired, but it still persists. I really hope I can fix this problem, else I am going to buy a different router over the weekend. I can't play FPS games like Bad Company 2 with such high latency.
View 1 Replies
View Related
Feb 28, 2012
I have a new redundant network with two cores C1 and C2 and five access switches A1 to A5. They are all Cisco SG300 switches. I have noticed there are too many STP messages emanating from one host which has a MAC address which cannot be traced on the network. In the redundant network, I made C1 the root bridge by giving it a priority of 4096 and C2 has been given a priority of 8192 so that it is the secondary root bridge in the network. I have left all other STP settings to default on the rest of the switches in the network.
The problem is that one host is advertising a RST root bridge all the time. Now it has a mac address which is different from the mac address of the root bridge itself and i cannot trace this mac address on the network. Look at the snapshot of Wireshark output in the attach.The source MAC address which is the host advertising all the time is 1c:df:0f:34:db and the root bridge is 1c:df:0f:bb:34:c4.
Why would the root bridge be resetted all the time?I've also noticed that one port in a LAG configuration on one of the access switches is flapping up and down all the time.I tried to troubleshoot this problem. It is not the cable. It would be something else. What could cause this flapping of the port?Could it be related to STP?
On the other Core switch C2 I can see a LAG status switching between forwarding and blocking all the time. What could make the LAG status to flap from forwarding to blocking and back all the time like this?
View 3 Replies
View Related
Jan 20, 2013
After connecting to the internet on my laptop, the internet connection will work great for 10 minutes or less than it slows down drastically or essentially not working at all. If I disconnect and reconnect it will work again but just for a short amount of time. The wireless connection works great on iPod, IPhone, and tablet. Downloaded Kaspersky Antivirus which said it fixed some viruses but internet got worse after that. Tried restoring the computer to factory settings and the internet stays connected for what seem a few minutes longer.
View 3 Replies
View Related
Nov 26, 2011
it seems so far that everything other than AIM works out of the box with this router but within 5mins time AIM disconnects. I have tried the application filter and port forwarding but nothing seems to work.
View 9 Replies
View Related
Sep 24, 2011
What could b the issue with my internet connection i keep losing the connection every few minutes if im idol on sites not games related i stay connected when i go onto games i start losing the connection. [code]
View 13 Replies
View Related
May 1, 2012
For the past 2 weeks i have been losing internet connection on my pc, ps3, laptops and phones every 15min and i have no clue what to do. It has never done anything like this.
View 2 Replies
View Related
Sep 5, 2012
My internet connection will cut out every 5-10 minutes. Sometimes it will stay on but MOST of the time it cuts out every 5-10 min. other times my ping will jump to over 2000 or stay around 200 for no reason. It has gotten to the point of where I can not play any online games anymore, and there is no possibility of a wired connection.6-8 months ago we has slow internet speed and Comcast told us it was not their fault it was our router, and that routers go bad every year or 2, so we got a new one. My connections to the old router used to be 3-4 bars and with the new one it is 1-2. Ok so the big issues was it started getting bad where my connection would randomly cut out. I thought it was my wireless network adapter because it was old. I was constantly unplugging it and plugging it back in or releasing and renewing my ip every 5-10 minutes sometimes more often. Let me define cutting out, sometimes it would be everything, but most times it would be just one application like website or just the game I was playing but not steam chat.
So I got a new wireless adapter and we hooked back up the old router to find out Comcast had lied to us and our speed was fine on the old router ... in fact out connection was better. but still the problem remains.. random cutting out of internet completely and random huge lag spikes.... it is less frequent but still every 10-20 min something goes wrong. I have tried changing the routers channel, updating both routers. I tried setting myself up a static ip but it would not give me internet connection if I did... idk if i had the DNS wrong or something. Anyways I am at my wits end and about damn ready to try ANYTHING to make this work again. It did before so I know it can work! I will try anything and post any reportsSometimes I might be slow to respond because I have to try things out for a little bit to see if they worked.
View 1 Replies
View Related
Mar 7, 2012
Router Starts at full speed 300/270/243, jumps around a bit. Then around 5 minutes speed is cut in half 130 Mbps. I tested it out for 2 hours rebooting it, and in almost exactly 5 minutes the speed is cut in half every time. Is my router bad? Or is the good neighbor policy just going into effect? I do have a lot of traffic, I am in a apartment, but I use a free channel
View 3 Replies
View Related
Feb 5, 2012
I have a problem with my wireless connection. I recently installed Windows 7 Ultimate 32bit OS and bought a new NETGEAR genie router WNR2200. I am experiencing lag spikes in 1-2 second duration while playing games. These lag spikes freeze the game and send my ping sky high (ping 999ms). While browsing the interwebz I don't really notice the lag spikes because they are only a few seconds long.Changes I have made (PC):
Disabled Client for Microsoft Networks
Disabled ANOD Network Security Filter driver
Disabled QoS Packet Scheduler
Disabled File and Printer Sharing for Microsoft Networks
[code]....
Mode: Up to 300MbpsAfter all these changes and tweaks I still get the exact same problem I started out with. The above changes were recommended by users of random forums to fix wireless lag spikes. Using a cat5 cable is not preferred (and perhaps not possible) as I am renting from random people and the router is on the other side of the house.
View 2 Replies
View Related
Jul 10, 2012
I have brought a broadband connection from a local ISP called YouBroadband. (I am from India, if you are wondering.) For the first month of my plan, I was having internet connection without any issues. But since 2nd month, I am experiencing a very strange problem. When I turn on my PC and connect to internet by entering my password, I do so without any problem. But after a few mnutes of connectivity, I loose my connection. Even stranger is the fact my Windows 7 Ultimate edition does not recognise this. It still shows connected sign in the notification area. But I am not able browse any more using any browser. to solve the problem, I start network troubleshooting, which in a few seconds shows, resetting 'Local Area Connection 2' and then I am able to log in again. At times this solution also doesn't work. All i can do at that time is shut down my PC, wait a few minutes and restart again. To my extreme dismay, this keeps happening over and over again. I connect, get disconnected, reconnect and again disconnect. This is terribly disturbing and annoying.
I have searched on Google with no success. I tried changing DNS server settings and put Google open DNS address as my preferred DNS server but that didn't solve the problem too.( I received this tip from a friend of mine.) Here's what I get when I type ipconfig/all in Command prompt-Windows IP Configuration[CODE]
View 14 Replies
View Related
Sep 24, 2012
I am on a home LAN with a high speed broadband connection, Apple TimeCapsule router, and Windows 7 laptop. Starting this morning every 1-2 minutes my Internet connection stops working. I can not load webpages, send email, etc. A yellow triangle with an exclamation point appears over the WiFi icon on the taskbar. When my Internet connection stops I can disconnect from the wireless then reconnect. That will work for another 1-2 minutes only.
I do not recall doing anything that could have caused this (obviously something caused it, but I have not been screwing with drivers or anything and it has worked fine since I bought this computer 2 months ago from Dell). I have read several threads from where people had this problem in the past, but to no avail. For instance some people had multiple firewalls in conflict with one another or needed to renew their DHCP lease, but that is not true in my case.
Here are steps that I have taken to repair the problem, but with no luck:
- Restart the computer fully, many times
- Renew the DHCP lease
- Run the troubleshooter
- Changed my DNS servers from the ISP's to Google's
- Uninstalled all OpenVPN software
- Removed the stored WiFi network data from Windows then reconnect
- Verified that only 1 firewall is installed
- Tried it with the ethernet, which works
- Tried other computers on the WLAN, which works
- Ran anti-virus and anti-malware scans (no infection)
I do have a VirtualBox installation, but I have not run it in weeks. Even when I was connected for that 1-2 minute period I was unable to connect to my work OpenVPN, which is what led me to try uninstalling the VPN software, but that doesn't seem to be related.
View 1 Replies
View Related
Apr 3, 2013
I turn my laptop on, start browsing in the internet, etc. A few minutes later I can't do anything. Pages won't load, skype stops working. So I go to Wireless Connections, disconnect from the channel and connect again. After that the internet is back and working fine. Same thing happens a few minutes later. I'm assuming that the problem's with my laptop, because phone still has internet connection and before my desktop PC broke it was working OK (with wired connection). My wireless card (not sure how it's called) is Intel Centrino Wireless-N 2230.
View 14 Replies
View Related
Jul 27, 2012
For the past day or so I have been having problems with my internet connection to my PC. It has been working fine for a few hours, then it suddenly goes down for up to 30 minutes, with sporadic (lasting about 30 seconds) reconnection during that 30 minute period.I am pretty certain this is a computer related issue (as opposed to a problem with the modem), as none of the other computers in the household. (Ihave been affected, and neither has the wifi (I have browsed on my phone while the internet on my computer was down, in fact am currently writing this post on the wifi while my computer has no access)My computers specs (Taken from the sys info program when I regained connection for a short while) [code] Steps I have already taken in an attempt to solve this problem
1. Reset modem (turned it off and back on again)
2. Ran most of a virus scan in both macafee and avg (they both got to about 85% and by that point were just scanning steam stuff
3. Talked to a verizon tech, confirmed it is most likely not a modem problem (he didnt know what the problem was however)
4. Changed out the ethernet cable, the new one works no better than the original
Additional note: Earlier today (after these problems had begun) I was downloading the latest version of hamachi from a site soft32.com when I recieved a trojan warning from macafee. I immediatly stopped the download, restarted my computer and began scanning with both AVG and Macafee, neither found anything of note (AVG found something it labeled a hidden directly, I looked it up and it seems harmless)
View 14 Replies
View Related
Apr 17, 2012
I have a Talk Talk Unlimited Internet connection in the UK.The modem they provided is D-link DSL 2780 N type ADSL+2 router.The wireless net connection is shared by 5 other people in my flat and as far as I am aware - their connections seem to be seamless..In my case - the speed of the wireless connection starts deteriorating after about 20 mins - i.e the pages start loading slower, and then a while later the pages don't load at all - but the signal strength and connection would be displayed as normal..When I try to disconnect and reconnect- Windows says it's unable to connect to the router..It runs some diagnostics and advices me to turn the router off and then on
[code]....
View 4 Replies
View Related
Feb 14, 2013
We have a newer linksys router supporting 4 laptops, 2 desktops, 3 iphones, an ipad, an apple tv (also a smart tv, two wifi blu-ray players, but I'm less concerned about those devices). Everything is relatively new (1-2 years old). Most everything is turned on during the day but only a few things may be in use at a time.Many of my devices are loosing connection multiple times per day, my ipad is losing connection every 15 minutes, my apple tv takes a lot of finagling to connect (my level of tech expertise is basically me power cycling everything and prayer). Once my laptops get online, they tend to stick. It seems my apple devices lose signal more frequently.I've updated the firmware on the router and played with wideband settings and channel selection and haven't noticed much difference. I do see a lot of other wifi signals around me. The constant disconnecting has been going on for a couple of months. We have Comcast/Xfinity as our cable provider on 20/MB internet.
View 1 Replies
View Related
Jan 15, 2011
Just starting a couple of days ago my internet started dropping about every 10-20 minutes. The problem is only with this computer. I have a laptop right next to me and it works fine no problem and two other PCs that don't have any issues so I don't think it is the router. I have scanned my computer with different antivirus software and it's clean. The computer is always connected with a full 5 bars and says it has internet access but sometimes it drops and in order to get it up and running again I unplug the wireless adapter and plug it in again. At first I thought it might have been the adapter so I swapped it out for a new one and I'm still having the same problems. My wireless is unencrypted. This keeps happening over and over again and I am stumped on what to do.
equipment: WRT54G linksys router
belkin surf and share n300 adapter
linksys ae1000 adapter
windows 7
View 18 Replies
View Related
Aug 27, 2011
Every time I boot my computer, the internet is working fine and shows no signs of anything wrong, but after loading so much (several minutes of a YouTube video, or just idle data coming in from other sites I'm on) it just comes to a halt and nothing can get through. At first, I thought that this was my school's internet being bad since I had just moved back into the dorms today. The problem with that is that I seem to be the only one having a problem like this. After so much time, depending on how much bandwidth I'm using (I think, this is just based on observation), it just drops the internet completely and won't start again until I reboot.What I've found so far is that I can't seem to get an IP address after the service stops, but I don't know how I could connect that to anything.
View 1 Replies
View Related
Jan 13, 2013
I recently reinstalled windows so as my pc was on service (one of rams was gone down) , but it is not the issue. My network connection is delayed, sometimes 5 minutes, this time 15.I found 2 types of errors in event log, I will add them at end of post .
So the problem - my computer acces network really slow. I am musing Modem what is connected with PC by my Ethernet cable and on pc I am using Local Area connection.Computer simply say that cable is unplugged while it is pluged in ( It works perfect with same modem and cable onmy laptop, I even tried different cable - no refult).Icon all the time have red cross, sometimes disabling/enabling network adapter fixes i, but nit today, then after some time it turns on in normal speed - several seconds blue circle spinning around and then connects.
But there is huge delay.Usually if he turn in it stay like thus, but sometimes it disconnects after some time ( after hour, maybe less or more ).I recendly find out one more thing, if I have my net fully working on my laptop and I plug off cable from laptop and blug in into my stacionary PC it connects pretty fast, i may be nothing, but sometimes it is only way.When trying connect it drops these 2 errors, sometimes several times : The driver DriverRTL8167 failed to load for the device
PCIVEN_10EC&DEV_8168&SUBSYS_E0001458&REV_014&39aeacf1&0&00E5.
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x001FD08E0204.
View 1 Replies
View Related
