it seems so far that everything other than AIM works out of the box with this router but within 5mins time AIM disconnects. I have tried the application filter and port forwarding but nothing seems to work.
View 9 RepliesI have connected two dsl modems for extending wifi coverage,the main one is netgear and the extended on is D-link,but the problem is the d-links wireless disconnects every 5 minutes or so..i have connected a pc with a cable from this modem but there r no problems with pc internet...so is the hardware of modem faulty or is this due to inappropriate settings of modem,i have disabled the dhcp and changed the ip address already.
View 2 Replies View RelatedI just recently purchased a D-Link 615 and i've been having disconnection issues with the internet. Every now and then the internet connection disconnects and i have to reboot the router to have internet access again.
View 1 Replies View RelatedRegion : UnitedKingdom
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
i m experiencing wireless disconnects every 5 or 10 minutes and all i have to do is too disconnect from the router in windows from Wireless connections panel , and reconnect and it ggets fixed for some time again . i got so frustrated that i changed to openwrt , the disconnection problem is gone but not getting the 150Mbps.
Recently I've been experiencing random disconnects.
My setup is a Actiontec Q1000 with (QAQ002-31.20L.4) modem/router that talks to qwest. Then I connect to a linksys router WRT54G2. I connect directly to the linksys router with an ethernet cable, but my family connects to it wirelessly.
I ran a constant ping to my modem and to google, and on the random disconnect, the Actiontec Q1000 gets a huge 4000ms response time (but then it resumes normally), and I get ping timeouts to google. Windows 7 will say "no internet connection available". Not sure if it makes a difference, but I had google timeout 4 times during my constant pings.
Nobody else is connected when it does this random disconnects, so I'm not sure what's causing it. I've tried a lot of things, from changing and flushing my dns, connecting directly to the modem, turning off QoS/firewall settings, but nothing seems to work.
my ethernet cables is plugged into my xbox and router. it gets disconnected every 15mins. should i change something in the routers config page?
View 11 Replies View Relatedmy idea net setter disconnect after 10 or 15 minute.
View 1 Replies View RelatedI've been having this problem for a while now but something is coming up for which i require 24/7 internet connection with NO failures. problem: about 2 to 3 times a day i lose internet connection for about 1 to 2 minutes and after that everything is totally fine again. There are 5 lights on my modem in this order from top to bottom:
Internet: This light blinks green when im using it like downloading or playing something online. It stays green when i have internet but im not sending or recieving any data.
DSL: always green.
Wireless: I use wireless connection. its always blinking orange (i dont know why orange but it works fine)
Ethernet: This light is always off cause i dont use cables.
Power: always green.
What happens is that my DSL light which is supposed to be green. starts blinking. Then after 30 seconds or so it stops and just turns green again but my Internet light turns red. It stays red for about 1 to 2 minutes and then it turns green again and works fine again. Called the company many times but they dont detect anything because when we call, its always working fine. so all they tell me to do is reset the modem which does nothing. I never had this problem at my previous house 2 years ago. it just started at this address so it makes me think it is the line and not a computer/modem problem.
So lately I've been having this problem where my internet decides to stop working for about 5 seconds every half an hour or so which gets kind of annoying if i'm in the middle of an online game or anything else that requires an uninterrupted connection. When it occurs none of the lights on the modem change and all of the other computers connected to it do not disconnect, only my computer is disconnecting.
So far I have tried changing the ethernet cord, switching ports on the modem, updating all of my drivers, and going into the device manager to disable the cut power to device option on my ethernet card. but none of these seem to alleviate the problem.
I have Windows 7 PRO and since I bought it I have wierd disconnects. The network works for like 2-3 minutes and then disconnects for 5+ mintues.
View 5 Replies View RelatedMy net connection is disconnecting every 30-45mins and this has been going on now for the past three weeks since I built my new PC.Here's what I've done to try to rectify this:
* Uninstalled/reinstalled Windows 7 (64-bit)
* Called ISP (AOL), whose first and second-line tech support ran tests and couldn't find any problems with the line.
* Changed the router (from a D-Link DSL2640-R to a Huawei EchoLife HG521 - both provided by ISP).
* Replaced the Ethernet cable that connects the router to my PC.
* Replaced the Rj11 cable that connects my router to the DSL filter.
* Replaced both DSL filters in my house (I have two phones at seperate locations in my house).
* Removed the bell wire from my telephone sockets. Whilst this didn't fix the disconection problem, it has increased my download speed from 130kbps to over 300kbps.
* Uninstalled the ethernet network adapter and then installed the most up-to-date network adapter driver available.
* Tried a couple of programs to optimize both my network and my PC to no avail.
* Changed my Anti-virus software from AVG to Avast, but again, there's no fix. [code]
I can give is that every 5-10mins my internet cuts out for about 5 seconds, just long enough to kick me out of a game if I'm playing one.. so it's beyond frustrating. I use a toshiba laptop and it was recently reformatted. These stupid dcs used to happen before the reformat.. they'd happen one week then stop the next. after the reformat which was done (hopefully professionally) by geeksquad, infact they gave me a new hard drive too cause my old one heated up real fast, I was fine for a few months and now like a sickness it has strucken me again. So far it's been a week of nonstop disconnects every 5-10mins... it actually did stop for about 12hours today but I rebooted and then it started again.. so there IS a way to fix it, I just don't know what I did.I am 100% certain it's not my wireless connection, the same thing happens with an ethernet cord. the ipconfig flushdns stuff, and the netsh winsock reset stuff. also of course i've done various virus scans i'm fairly certain that's not the issue.
View 14 Replies View RelatedI'm having a problem with my wireless internet connection. Just recently my roommates and I got cable internet and a wireless router for the house. Since connecting to the wireless router, it keeps on disconnecting me and then reconnecting once every 2 minutes about. The disconnection last for only 10 seconds but is very annoying and disrupts everything I'm doing on the internet. What is going on and how can I fix it?
View 13 Replies View RelatedIn one setup, we have fibre optic connection given by the ISP upto Distribution box inside the house where the fibre optic cable is connected to HUAWEI-ECHOLFIE HG865 terminal .From the RJ 45 port in that device , the ethernet cable goes to the DLINK 8 port switch. All the 8 ports are connected with ethernet cables to 8 rooms going concealed through the wall.
Our ISP person tested the connection by connecting one patch cable (from the DLINK SWITCH via the wall socket)to the WAN port of LINKSYS WRT300N wireless router and connecting other ethernet cable from the lan port of the router to the laptop ,setup the username ,password, encapsulation pppoe and configured the internet .found working. I tried to configure the wireless in the house by fixing LINKSYS access point in some rooms.
Here the problem started. I cannot fix the LINKSYS router inside the DB in front portion of the house since there is no space in that and cannot keep the linksys router outside also, So I kept the linksys router inside one room and tried by connecting cable from the wall socket to a 5 ports mini switch and from the mini switch I connected one cable to WAN PORT of the linksys router and one cable to linksys's lan port because I want to share the internet in all the rooms.
Just today i've started having problems with my Wireless Network. Other adapters in my area are causing me to get random disconnects every few minutes.I've tried changing the channel on my router several times, but to no avail. Is there anything else worth trying?
View 8 Replies View RelatedEvery 25 minutes, sometimes sooner, sometimes later but usually on the dot I get limited access and the router interface becomes inaccessible for about 1-3 minutes. My problem is my room mate has left for the week and the router is locked in there. I am unable to connect hardwired or power cycle the router. I have the password for the connect and I just got the PW for the router interface. I also have remote capabilities. I have been trying many things to stop it from being so slow and unstable but basically even though my signal reception is 4-5 bars I am only averaging 11mbps speed. I am using a b/g alfa 1w adapter but this shouldn't be the cause of the slower speeds. I can only achieve 1-3mbps down on speedtest.net whereas before I was getting 6-12mbps down.
-UPnP Off.
-NAT Firewall Open.
-300mbps Max
-Channel 1 no other channels within 5 channels near it.
-WPA2-PSK [AES]
-Default MAC Address
-Automatic Configuring of all IP Addresses
-MTU 1500
-WMM On.
Being limited by lack of power cycle and hardwired connect makes it a little harder. I know it's fixable without that though. Also there is no point of a hardwired connect unless I am upgrading the firmware (it already has the newest firmware by default) because I know it should work fine like that. I have tested connecting to other networks and I do not d/c on them. My own research has shown that setting a static IP resolves the issue. I am unfamiliar with exactly how to set this up for the router and the client and if it involves dealing with the ISP (Comcast)
Yesterday I bought a new wireless adapter (Belkin Surf Micro, it was the only one for sale nearby). I installed it from the disk, and it worked for around a minute, then... nothing. This kept happening every time with several reboots and reinstalls inbetween.I thought maybe the adapter was faulty, so I installed it on my Mums laptop. It worked great.I have tried flushing the dns, and some other command prompt based things suggested on other sites, but to no avail.But here's the thing that strikes me as funny: Even when it connects to the internet for that minute or so I cannot ping the router, even though it says on the router page (viewed from another computer) that I am definately connected to it. I also cannot ping google or anything but myself.
View 5 Replies View RelatedSo I recently moved a little bit away from where I was. My new area only has one internet provider available called "Hot Spot". We got the 10 down 5 up plan and I get what I paid for in that respect. My issue is that it won't even stay up for longer then 20 minutes. At first I was using the Netgear N750 WNDR4000 router, but I switched over to my ASUS RT-N56U router thinking it might fix the problem. Same thing happening with this ASUS, but when it goes out and I try to load a web page I get the error "you have set the wrong dynamic or static IP address for your RT-N56U." The router setting is set on automatic IP so I'm not sure if that's the problem. I called the ISP and told them I have Dish for TV and they said that is most likely the problem as it can often conflict with the IP or something like that. So I called Dish and they sent me this "Hopper Internet Connector" which supposedly fixes this issue because it directly connects it to the router instead of wirelessly. That still didn't fix the problem. I have tried turning wireless off completely and it still happens. I have reset the router to factory settings probably 4 times. I really don't know what else to do..
View 4 Replies View RelatedI have been having this issue for the past one week where though i am able to connect to the internet through the wired lan without any problem when i connect it to my buffalo wzr - hp - ag300h router it disconnects within 5 minutes and on trying to check the internet connection DHCP server not detected error is shown. I have another edimax router and i tried to setup wireless with that router and have the same problem of disconnection after 5 minutes. [code]
View 14 Replies View RelatedI got a brand new Vizio Ultrabook CT14-A4 running Windows 8 64bit. The problem is that the wireless will disconnect every 10-15minutes for about 30 seconds and then reconnect. It will show full bars but say No internet access or Limited. If I try to reconnect it will say that it is unable to connect to this network. I updated Windows to the fullest and updated all my drivers including the one for Qualcomm Atheros AR5BWB222 Wireless Network adapter. Nothing changed. It does this on every wifi I connect to. Including home, school, other people's houses, etc. My other computer running Windows Vista works just fine with all of these wifi networks. It only disconnects for 30 seconds to a minute, but it is irritating because it will interrupt my downloads, and time me out of any sensitive websites I was on like the bank or the University self-service website.
View 6 Replies View RelatedDid anyone use EA4500 with L2TP connection? I really don't know what to do. I bought this router because I wanted to setup my home network with really high quality up-todate and efficient router. Previously I used Dlink DIR685. Everything was OK but lately my ISP increased internet speed up to 40 megabit per second and Dlink can’t establish connection at a speed higher than 20 mbit/sec. So I bought the best router – I thought so. Router appeared to be rather powerful – the connection was established at a speed ~ 34 mbit/sec, wifi broadcast occurred to be also of high speed and long range. But the main and terrible problem is that the longest internet session for the last 10 days was about 30 minutes. And that is with "keep alive" setting activated. That is awful! My Dyn DNS service doesn’t have even enough time to update my new IP in its DNS base. Of course that is way I can’t get external access to my ftp most of the time. I believe that its firmware ver.2.0.37 is very raw. And there is no any firmware on Linksys site so I can’t neither reinstall firmware 2.0.37 nor downgrade to 2.0.36. Hope this bug will be corrected soon. May be that is defect of this specific router?
View 9 Replies View RelatedMy new EA 2700 disconnects from the internet if the desktop is idle for more than 30 minutes. needs to be unplugged for a few minutes then it will reconnect. This is an unacceptable situation and this thing will be tossed if it cannot be fixed. Can this be reset so it won't disconnect? or do I need to replace it with a product from another company?
View 1 Replies View RelatedI have a strange situation on my guest wireless LAN.The guest WLAN is configured as an SSID "GUEST" on Cisco 1142 lightweight APs, with WiSM controller and WLC software version 7.0.230.0.
For simple Internet access using this SSID, we have a web policy, which causes a web page to be displayed when the user opens his/her browser, and on this web page, the user must click on an "Accept" button in order to accept the terms and conditions of use. Once the user accepts, the browser will then go to the web site which the user wishes to open. When using this mode of access, everything is fine.
However, there is also a pre-authentication ACL, which allows certain types of VPN traffic to reach the Internet without the user being required to accept terms and conditions. The ACL allows ESP, IKE (UDP/500), IKE over UDP (UDP/4500), DNS, HTTPS/SSL (TCP/443), DHCP client and server (UDP/67,68).The pre-auth ACL actually works as intended; and the ACL traffic is NOT allowed when the ACL is removed. This is exactly as it should be.
However, when using, for example, a VPN client such as the Cisco VPN client, or the Cisco AnyConnect client, via this guest SSID without user acceptance, the WLAN regularly and predictably stops passing traffic. This is 100% repeatable and predictable; it happens every 300 seconds, or possibly slightly longer. I have only used my PC clock to time it so the timing isn't all that accurate but I'm sure it's within a few seconds.
Given that the problem happens at the same time interval and is constant, I guessed there must be some configuration item which needs to be altered, but I've looked extensively at the controller GUI (we actually use WCS here) and I can't see anything that looks even remotely related to this.
Router Starts at full speed 300/270/243, jumps around a bit. Then around 5 minutes speed is cut in half 130 Mbps. I tested it out for 2 hours rebooting it, and in almost exactly 5 minutes the speed is cut in half every time. Is my router bad? Or is the good neighbor policy just going into effect? I do have a lot of traffic, I am in a apartment, but I use a free channel
View 3 Replies View RelatedI have a DIR-615, hardware version: C1, firmware version 3.12NA and my issue is that it keeps dropping my VPN connection after 12 minutes. Sometimes it'll go longer than 12 minutes but on average right at 12 minutes of my connection, it drops. This happens whether I'm using the wireless or hard wired to the router. As a test, I ran a continuous ping on a computer on my internal network and also to a computer on my corporate network. When I'm VPN'd in, both pings are successful. Once the router kills my VPN session, the pings to my internal network are successful. So the router isn't rebooting or anything like that. My VPN session will automatically reconnect, but I'm stumped.
View 14 Replies View Relatedi have TP link router model no TD W8951ND.. i can access internet but wifi disconnects in every 5 mins.. i have to connect again but as soon as i got connection after 5 or 10 min it disconnects again..
View 1 Replies View Relatedone last try before boxing up my new DIR-655 and taking it back to Microcenter. I've opened a case via email and got the standard response, below.I have a Dlink DP-300U print server that works fine with my 'old' Belkin router, a F5D-7230-4 wireless unit. Nothing wrong with the Belkin, I'm just getting some service drops from my lousy AT&T ifitl 1.5mbps ISP and thought a new router might work. I actually read the manual (!!) before installing the DIR-655 and even followed it. The print server just isn't visible on the network. Everything else is, though. The 'suggestions' from Dlink tech support below are very useful. If I could 'see' the print server to verify its IP address, we wouldn't be having this conversation. I've rebooted everything, several times and even reinstalled my old Belkin router (which always sees the print server.) And Dlink, no...I'm not interested in paying you $32.95 for up to a half hour to maybe fix a problem caused by your new device. And dropping my call after almost 15 minutes on hold is not cool, either. With reference to the issue you are facing, we suggest you to kindly ensure that the IP address assigned to DP-300U print server is in the same network range as that of your DIR-655.
NOTE: The default IP address of DIR-655 is 192.168.0.1 Once it is done, try to ping the IP address of DP-300U using any of the wired / wireless client connected to DIR-655.note the DP-300U is not currently supported in North America. D-Link offers a premium fee based support line that will be able to support any issues you have with this product.
D-Link Dir-655 A3 lose internet connections between 5 to 60 min.
I use Telewell TW-EA501 v3 (b) ADSL modem and Windows 7 64bit Windows firewall + Microsoft security essentials
I have done:
- Enable / Disable NTP Server
- Wish is turned on / Off
- In Firewall it says
[Code].....
there is no DIR 632 forum so I figured I'll post in the most active close one. My DIR 632 Disconnects AOL IM every 10mn or so, i tried changing the ports from 5190 to 443 which use to sole an issue of rapid disconnects/reconnects with a previous router (linksys).
View 5 Replies View RelatedMy D-link router won't give me a break. Every 10 or 20 minutes it resets, severing the internet connection. This is extremely annoying, especially when I'm playing online games or downloading something. Simply put, the three lights suddenly turn off, then they start turning on again one after the other. I don't want any of the automated answering machines with their usual 'help', like "download update", "contact your ISP","disable your firewall".
View 2 Replies View RelatedNewly purchased DSC-930L connected to DIR-625. Firmware is 1.0 for DCS-930L and A1-1.09 for DIR-625.Camera works fine when connected with cable. Wireless enabled, fixed IP address.Unplug cable and camera still works fine for a while: can access the view page and view picture that does change. F5 refreshes page no problems. After a while (about 5 minutes) web page no longer reachable by browser. Reconnect cable and works fine, unplug and repeat the cycle same thing happens.Also tried: unplug ethernet cable, unplug power cable, wait 10 seconds, connect power cable, try to browse to camera - cannot reach camera.
View 13 Replies View RelatedI'm trying to hook up a dap-1522 to an SMC8014WG wireless router. All goes well for about 10 minutes then the SMC drops all wireless connections except the connection to the 1522, and loses internet connectivity.There are several other wireless devices connected to the SMC but none of them causes it to go down.
View 6 Replies View Relatedrouter started disconnecting clients every few minutes
View 2 Replies View Related