D-Link Dir-655 A3 lose internet connections between 5 to 60 min.
I use Telewell TW-EA501 v3 (b) ADSL modem and Windows 7 64bit Windows firewall + Microsoft security essentials
I have done:
- Enable / Disable NTP Server
- Wish is turned on / Off
- In Firewall it says
[Code].....
We have DIR-615, almost 18 months old, we must occasionally reboot because it APPEARS that the device has had its certificate expire. We tried changinf the tomeout expire to 999999 no luck.
View 5 Replies View RelatedI have a very well updated Laptop running XP well patched with IE7.I have run all the malware scans and there is nothing wrong on the PC.After exactly 10 minutes of the PC being on, wireless internet connection is lost, BUT:Signal Strength states "Excellent" I can't access any website at all on the web. (Except for "Facebook" for some odd reason?) I can't access it after the 10 minute mark but if I'm already on it, I can navigate thru it's site without being disconnected, don't ask me why I have tried the following:
- Dynamic and Static IP setting
- Turned on and off windows firewall and rebooted each time
- Ran all kinds of malware detection and virus scans
- Disabled power management on network card
- I've tried different PCs on the same network and they're fine
- Tried ipconfig release and renew
- Tried repair connection
- Tried netsh reset
- Tried FireFox and other browers
- Logging off and back in doesn't work, must restart the computer to get another 10 minutes
So i setup an Asus RTN66U router with an HP 1800 24 port switch. Ive got 2 PC's,xbox,cablebox, and wii(wireless).about every 5 minutes or so, it seems I lose connection. Its very apparant when I play BF3 cause it will close the game and say connection with server timed out.My question is how should I troubleshoot this. How do i pinpoint router, switch, or modem or something im missing.
View 9 Replies View RelatedAbout every 20 minutes, my internet connection, which otherwise runs well, just drops out randomly. When I diagnose the problem, it tells me "Cannot communicate with Primary DNS Server (50.30.208.77)." If I leave it alone, it corrects itself after a couple of minutes, but I can also reset the local area connection and that will get things working again as well. This started a few days ago, and I was hoping it would just go away, but it has not. To reiterate, my connection is fine for about 20 minutes at a time, but then it will just drop out for seemingly no reason. I don't use wi-fi, I'm connected via an ethernet cable to an outlet on my wall. I've tried different cables and the problem persists, so I don't believe it has to do with a faulty cable. I didn't change anything about my hardware or software the day this problem sprung up. [code]
View 3 Replies View Relateda few weeks ago I started hosting a server for a game from my computer. It's been working fine and I've been having no problems except for one.After a few hours of hosting my server, my internet connection will immediately drop down to 1.0mbps, and I lose all connection to everything until I reboot my computer.I'm using a wireless internet adapter right now and having this problem, but when I used a wired connection a similar thing would happen where my entire connection would "lock up" in a way. I couldn't connect to anything until I rebooted my computer
View 4 Replies View RelatedJust installed a DIR-615, not impressed so far I have 3 clients, a Windoze 7 laptop, a Kubuntu workstation (wireless N) and a wireless HP printer. When I enable DHCP reservations and reserve the addresses then save settings the router reboots and when I go back in all info is gone and nothing is reserved. I have been having weird disconnection issues - I lose my internet periodically for no apparent reason so I increased the lease time and am trying to reserve addresses.
View 3 Replies View RelatedI have a cisco RV180 hooked up to a cisco cable modem and Cox service.
The basic symptoms of the problem are that every 10 minutes or so external connections will hang. This lasts maybe 20-60 seconds. If you're loading a website when this happens, various parts of it won't load and firefox will sit and spin indefinitely (it seems) until you manually stop the loading and click the reload button.
When this is happening I can still connect to the routers webserver and dashboard that auto-refreshes every 10 seconds. It seems perfectly fine. My initial theory was that something was broken on the Cox end of things, but after swapping out the RV180 with an old on-q router we had laying around, we haven't seen the problems.
Some other differences I've noticed between the on-q and the rv180:
* with the rv180 traceroute to external hosts shows a big delay (500-600ms) at the hop right after the router. With the on-q, it's 12ms.
* when I ping the ip of that hop with the large delay, with the on-q I get no responses. With the rv180 I would get these strange host redirect messages that make it look like that ip is redirecting to itself. There would be 1 or 2 of those redirect responses, followed by 3 or 4 errors, and every packet would be listed as an error in the ping summary.
A couple of days ago, after a suggestion in a old forum post (rv180 dropping connections every 10 minutes or so) I tried increasing the various session timeouts. This didn't seem to affect anything for the first day, but last night the router started becoming unresponsive (not responding to pings, but maybe continuing to route established connections.) After a couple minutes the router would be pingable again, and as soon as i could I reverted the changes I made to the session timeouts. That didn't seem to fix the problem. Logs showed many many warnings saying "nf_conntrack table full, dropping packet."
Then as soon as I got on the phone with small business support the problem seemed to correct itself. The only thing we changed was decreasing the MTU to 1472. It is strange that the MTU would make a difference all of the sudden, isn't it?
I have a WRT400N and approximately every 30-45 minutes the router will drop all connections (wired and wireless), all the lights will go out and then power light (far right light) will flash for a minute or so. I have tried connecting directly to my modem and I have no problems at all.
View 7 Replies View RelatedI recently bought a refurbished E1000 wireless router from Amazon, and from the first day I've had recurring connection issues with it. Every half hour or so it will lose all of its connections (wireless and ethernet) and requires a hard reset. After resetting, all connections are good for a little while but then the problem occurs again. When plugged directly into my modem (Motorola SB6121), my internet access is completely fine.
The router has the latest firmware as far as I know (2.1.02 build 5 May 6, 2011), and I've tried to change several settings (MTU to 1400, Fragmentation Threshold to 2306, etc) but to no avail.
I have a brand new EA3500 (three months old) that has worked fine until recently. For some reason the wireless keeps dropping all connections every few minutes. I have checked the internet connection and that is not it as I can be hardwired to the router and the internet never drops. This happens to every device in the house (two Xbox, tablet, multiple PC's) at the same time, or randomly between. The devices are a mix of G and N so it is not associated with just one particular band. I have verified the wireless phone, microwave, or anything else that might interfere with the signal is running. One thing I have noticed is that when the wireless connection drops, the actual signal does not go away, I can still see it with a wifi analyzer. This is very frustrating as I just replaced a previous Linksys router with this one for the very same reason. Perhaps I should have bought some other manufacture.
View 4 Replies View Relatedhow to link 3 different places where 2 of them have internet DSL connections.Actually Im running this layout...
Place 1:
DSL Modem connected to "Router 1" with DHCP Enabled. 192.168.1.1 and static IP assigned for every element in the network.
"Router 1" got this:
LAN:
2 computers
[code]....
At this point everything is working fine. Computers in "Place 1" can see computers in "Place 2" over network and share files and printers. Plus "Place 2" have internet from "Place 1".I want now to link "Place 2" to a "Place 3" using the same Nanostation M5 antennas and I can do it the same way I did Place1-Place2, BUT, what about "Place 3" router? it is connected to a DSL modem. "Router 3" should be DHCP Disabled too? What about the internet connection? I would like "Place 2" in the middle would be able to take the internet connection from both Place 1 - Place 3. It can be done keeping computers sharing files and folders between all 3 places?
We are a small business with about 9 Macbook pros and 3 PC's connected wirelessly to the router. The Mac-computers sometimes lose their wifi-connection to the router. When this happens they have to select the wifi network again from the menu, to reestablish their internet connection. For some of the clients, this happens about once each day and for others multiple times a day. The problem doesn't seem to appear on the PC's.
I have tried to solve the problem by making DHCP reservations for each computers MAC-address, but with no luck. I also tried to set the 802.11 Mode to 'Mixed 802.11n and 802.11g', and turning WISH off. I read that the connection can be disturbed, if other wifi-networks in the area uses the same channel, so I changed it to channel 3, based on a scan of the network, where 3 appeared to be the least used. The WPA Mode is set to 'WPA-2 Only' and Cipher type is 'TKIP and AES'
The Dir-655 is hardware version B1 and the firmware is 2.0.
I have a DIR-825 router series b, with firmware 2.05NA.My desktop is running vista 64Bit.I want to use my xbox 360 as a media center.I lose my connection between my xbox and my computer whenever the xbox is turned off. I can connect, and it works well, but only after I uninstall the extender from Media Center, then restart my computer. Then it sees the xbox on the network. I then have to set up a new connection. This is done over wireless N using the 5ghz band.The connection holds until my xbox is turned off. Then when I turn it back on it does not see the connection to the Media Center.
I updated the new firmware (my previous firmware was 2.02NA). I updated to 2.06, but then went back to see if that would make a difference and it didn't. The xbox can connect to xbox live and the internet (netflix etc...) but it does not see the home network to allow me to stream media between the computer and the xbox.I have disabled the firewall on my PC, I have disabled SPI, and do not have any other firewalls running on the network.
Region : UnitedStates
Model : TL-MR3020
I'm using a 3020 to bridge 3/4G to the ethernet port on my computer. Things work fine until I also join wireless hosts (like an iPhone or iPad). The routing of traffic to both the ethernet and wireless hosts seems to cause the 3/4G router to lose the signal and disconnect all hosts. I'm using a Verizon LG USB wifi device that is on the compatible list of 3/4G devices. I'm using the latest version of the firmware on the 3020 (I believe the date is Sep 2012).
I have taken on a new client who has the following setup, BT Infinity, Vigorpro 5510, and SBS 2011 server. I was involved with unpacking and seting up the equipment to get client up and running. I have never setup a firewall before, and after contacting Draytek, they guided to get BT infinity, 5510 to talk so that the server was able to get onto the internet. The setup was then left in its default state.All was fine until lately, the client keeps losing internet approx same time most days.My problem is how do i get the 5510 properly configured to talk to BT infinity, and sbs 2011. I always get lost when it come to playing with IP address. Also the client has a fixed IP address supplier by BT, so want to know how to setup the vigorpro with this address. [code]
View 1 Replies View RelatedIt seems that whenever I go on newegg, I lose my internet. It will regain signal quickly, but is a huge annoyance. I cannot shop nor look at parts pricing without this disruption. It is only when I am on newegg does this happen.
View 1 Replies View RelatedI lose internet connection every day in the same time etc.i lose it in 2pm and i get it in 7.pm and tomarow again lose it in 2pm get it in 7pmit is not virus i have cleaned every infection whit Malwarebytes,Emsisoft,Hitmanpro,SuperAntispyware and Spybot
View 4 Replies View RelatedI CONSTANTLY lose connection to the net .Then it takes forever to rejoin the net.I know this PC has ASUS Wireless Console 3 installed on it. I have, in the past, tried a few fixes offered on websites for suggestions when you lose wireless connection (i.e. Setting a static IP to connect to, turning on firewalls, etc.) none have worked.
View 14 Replies View RelatedIf I do a factory reset on a router, does that mean the computers on the LAN will not be able to access the Internet?but then the router will configure it's self automatically to re-allow connection ?
View 2 Replies View RelatedI've recently added a desktop pc to the home's wireless network (using a D-Link DWA-125 Wireless N 150 USB adapter rev.A2) and it used to play nicely with the other devices. After switching out the router to an Actiontec V1000H my computer has begun losing most connectivity when the PS3 is turned on.
The pc still sees the network and there is a little activity there it seems. Everything runs fine when the PS3 is off and in the Wireless Network Connection Status display the speed is usually listed at 65-75 Mbps. But when the PS3 is turned on it reads 6.5 Mbps with the IPv4 connectivity bouncing between "internet" and "limited". Windows' automatic diagnosis is "Cannot communicate with DNS server".
I tried assigning static IP addresses to the pc and ps3 thinking there was a possible IP conflict with the dynamic addresses. Thinking there could be a conflict with ports I read up on port forwarding but my knowledge of networking is limited and I'm not even sure if that is the problem.
There are alot of other devices connected, 2 laptops, 2 iPod touches an iPhone the PS3 and now this old desktop clunker. I figure it's possible that the router is getting overloaded with everything and the PS3 just pushes my computer's bandwidth out the window but I would think that there would be some noticable drop in performance on the other laptops as well, which there hasn't.
I have a desktop and several laptops and other devices running on a wireless network. Whenever the desktop is asleep or shut down, all the other devices lose connectivity to the internet. If the desktop is on and running, everything else works perfectly.
View 9 Replies View RelatedRegion : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : UPC Hungary Ltd.
I can't able to recognize a system - all wifi clients lose connection. When this happens, the ping answer time rech the ~2000 times, then totally lose the connection, the SSID is dissapear - checking with my phone (android - wifi analyzer) and TL-WN822N USB wifi adapter (with the inSSIDer application). Meanwhile the cable clients and the WAN connections works fine, didn't experience anything.If I restart the wifi service with the hardware on/off button, it runs well for some time.This problem appeared when I used the two older official firmware too.
I tried the auto-chanel function width auto channel width, tried to manually set up one of the less interfered channels with both 20MHz and 40MHz channel width, but none of them bring the solution.The intresting thing is, if I change the router with an old D-Link DI-604, the signal is weak, but the wifi connection is stable, with the same TL-WN822N adapter.I tried to guarantee the router, but after two weeks, my reseller said, it looks ok, they - at the TP-Link service - didn't find anything.
I've got a problem with Norton 360 6.0. Everytime it updates its definitions, my internet disconnects and I have to reboot my computer to get it back. However, every time I try to command prompt a ping, it says I'm connected as does my networking center.
View 1 Replies View Relatedi lose internet connectivity constantly although i still have WLAN connectivity. my connection is lost every 5 to 20 minutes. it dropped my connection in the middle of an A+ exam troubleshooter is useless. sometimes it says DNS unavailable. sometimes it say default gateway unavailable. but when i run ipconfig, DNS and Gateway fields look fine. it's happened when connected to my wireless cable modem (Ubee brand) the wireless hotspot on my mobile phone (an HTC myTouch) and now on my Clear Wireless portable wifi hotspot (Apollo model)[code]
View 3 Replies View RelatedI have 2 laptops and 1 desktop all connected to the same router, the 2 laptops are connected via wifi and the desktop PC is currently connected via an Ethernet cable, both laptops run windows 7 while the desktop runs windows XP and more or less every time the desktop is booted after a few minutes of normality connection to the internet is lost and the yellow triangle on windows 7 appears so to fix this I have to go into my routers settings via 192.168.1.1 and reboot which then solves the problem and all machines function as they should including the desktop.
View 2 Replies View RelatedI do love your products and I am not just sucking your *beep*, but could you please update the firmware on this modem (DPC 3008). There are a lot of people that are having issues with losing their internet connection when it comes to this modem. It doesn't matter who the ISP is, doesn't matter what we try to do to fix this. I read somewhere that after you updated the firmware in 2011 on this modem is when your customers starting having issues. Now I just bought this modem a few weeks ago so I don't know for sure. All I can say is if this issue doesn't get resolved, I am going to smash the *beep* out of it and never recommend your products to anyone as well as never purchase another product from you. I like you I really do, but I am tried of losing my internet connection when I am playing my games or watching movies. People have stated that they removed your modem for a different brand and their issues were resolved. I am giving you a chance to show me that you value your customers and you will resolve this issue in a timely manner
View 2 Replies View RelatedThere is going to be 2 computer and a router each with there own static public ip address (ie 68.x.x.x range) The issue i am running in to is getting the netgear set up correctly, every time i disable the dhcp server on the netgear and set up all 3 devices with the static ips i lose internet connection. If i leave the set work set up as dhcp on the lan side and keep the wan static ip it all works fine.
Hardware list
2 windows 2000 pro
1 netgear model FVS318v3
I have had numerous issues with my E3000 since I got about two months ago and they have all been resolved with the exception of this new one that popped up today.
My Samsung Blu-ray player is connected firectly via ethernet cable to the router. When it's on, I lose all conenctivity to the router with my wireless devices including three PC's, a PS3, two iPhones, one iPad, one Samsung Smart TV, one XBOX 360 and an Onkyo Receiver. When I say that I lose connectivity, I don't mean that I lose access to the Internet. My PC's see the network but cannot connect to it, the same goes for the Apple devices. The moment I shut off the Samsung BD player it kicks right back on and works normally. Until today, this never occurred.
I contacted Tech Support and they had never heard of this happening before. They suggested that I change the ethernet cable which I did while the unit was on and it worked until I turned the BD player off and turned it back on again. I also tried switching ports to no avail. Alos all of the software is up to date on both the router and the BD player.
I am able to successfully connect to my ASA5505 via AnyConnect via a mobile device. Upon doing so, I lose internet connectivity. My access list appear to be correct to I'm sort of at a loss.
[code]....
Lose internet connection at least once a day. Each time regaining by unplugging power cord for approx. 10-12 seconds. Is this a router failure and maybe needs replacing or ?
View 2 Replies View RelatedSo, I have this router at home a WRT150N. I put in access restrictions so my siblings won't stray onto unwanted pages.I enabled SPI Firewall Protection and what do you know, it worked. The next day though, we didn't have an internet connection.I checked everything with the modem (power cycles, etc.) and then I tried the router. Upon disabling SPI Firewall Protection, the internet connection came back.I tested it yet again, to see if it really was the SPI. Enabled and bam, no internet access again. I made sure to select "Allow" in the Access Restrictions for "Internet access during selected days and hours" making sure also that "Everyday" and "24 Hours" are selected.Now my question is, what do I need to do in order to enable my Access Restrictions without having to lose internet connection via the SPI Firewall?
View 2 Replies View Related