FVS318v3 - Always Lose Internet Connection When Set Up Devices With Static IPS
Jul 13, 2011
There is going to be 2 computer and a router each with there own static public ip address (ie 68.x.x.x range) The issue i am running in to is getting the netgear set up correctly, every time i disable the dhcp server on the netgear and set up all 3 devices with the static ips i lose internet connection. If i leave the set work set up as dhcp on the lan side and keep the wan static ip it all works fine.
Hardware list
2 windows 2000 pro
1 netgear model FVS318v3
View 4 Replies
ADVERTISEMENT
Apr 18, 2010
I have a disconnecting problem with my WRT120N (Linksys) wireless router. Sometimes all wireless devices lose the connection to the internet, and the access to the router administration page (192.168.1.1) becomes impossible. In this case LEDs of power, internet and wireless are lighting without flashing. This problem usually occurs every 48 hour, and there was no way to make a reconnection except turning the router off by unplugging the power wire and plug it again…
I hope find a solution for this problem here
Other question: are there any problems in Firmware Version: v1.0.04
Note: currently I use Firmware Version: v1.0.01
View 9 Replies
View Related
Oct 16, 2011
I have a WAG160N with firmware V1.00.16 (version 1 device).The router is connected via ethernet to my main iMac running Lion 10.7.2, although the issue's I'm having have occurred for some time before upgrading to Lion or its's latest update.Firstly, devices I connect to the router wirelessly such as my iPad and iPhone will allow me to use the internet on said devices for about ten minute then the internet will simply stop. The device is shown as connected (checking the wifi settings on iPad etc show the router is still seen). If I switch WI-FI off on the device, then back on, internet is restored. It's not an internet provider issue as I can use the net all day on my ethernet-connected iMac without a problem.My printer is connected to my iMac via USB and shared with other devices. It is seen on my Macbook which connects wirelessly via the router. If I try to print from the macbook, the print job will not progress until I re-start the router. Likewise, there are applications that I sync between my ipad and iMac via iTunes with my mac connected via the USB cable. The iPad will not bee seen by the iMac unless I re-start the router. My Apple TV will only sync wirelessly with the iMac if I re-start the router.
View 1 Replies
View Related
Aug 25, 2012
I have taken on a new client who has the following setup, BT Infinity, Vigorpro 5510, and SBS 2011 server. I was involved with unpacking and seting up the equipment to get client up and running. I have never setup a firewall before, and after contacting Draytek, they guided to get BT infinity, 5510 to talk so that the server was able to get onto the internet. The setup was then left in its default state.All was fine until lately, the client keeps losing internet approx same time most days.My problem is how do i get the 5510 properly configured to talk to BT infinity, and sbs 2011. I always get lost when it come to playing with IP address. Also the client has a fixed IP address supplier by BT, so want to know how to setup the vigorpro with this address. [code]
View 1 Replies
View Related
Sep 29, 2012
I lose internet connection every day in the same time etc.i lose it in 2pm and i get it in 7.pm and tomarow again lose it in 2pm get it in 7pmit is not virus i have cleaned every infection whit Malwarebytes,Emsisoft,Hitmanpro,SuperAntispyware and Spybot
View 4 Replies
View Related
Nov 18, 2012
I CONSTANTLY lose connection to the net .Then it takes forever to rejoin the net.I know this PC has ASUS Wireless Console 3 installed on it. I have, in the past, tried a few fixes offered on websites for suggestions when you lose wireless connection (i.e. Setting a static IP to connect to, turning on firewalls, etc.) none have worked.
View 14 Replies
View Related
Aug 7, 2012
If I do a factory reset on a router, does that mean the computers on the LAN will not be able to access the Internet?but then the router will configure it's self automatically to re-allow connection ?
View 2 Replies
View Related
May 13, 2012
Every time I boot up my computer, everything will be working fine for about 5 -10 minutes, but after this, all my browsers will lose connection to the Internet. All of them: IE, firefox, chrome, even the steam browser, all of them just lose connection.The weird thing is, my net connection is perfectly fine: I can still play online games, still use online chat services, still open and use programs like utorrent. It's like something is just blocking all my browser connections.When I run a network troubleshooter, it says "your computer appears to be correctly configured, but the device or resource (Microsoft Corporation: Software, Smartphones, Online, Games, Cloud Computing, IT Business Technology, Downloads) is not responding."I googled this and came across some apparent fixes like flushing and re-registering my dns and restarting my modem, niether of which has worked.In addition, this problem is showing up on two totally separate shared networks and has only affected my computer. Other netwworked devices, like friends/families computers and my iPhone (which I am using to type this) work fine.
View 1 Replies
View Related
Dec 9, 2012
I have 2 laptops and 1 desktop all connected to the same router, the 2 laptops are connected via wifi and the desktop PC is currently connected via an Ethernet cable, both laptops run windows 7 while the desktop runs windows XP and more or less every time the desktop is booted after a few minutes of normality connection to the internet is lost and the yellow triangle on windows 7 appears so to fix this I have to go into my routers settings via 192.168.1.1 and reboot which then solves the problem and all machines function as they should including the desktop.
View 2 Replies
View Related
Feb 24, 2013
I do love your products and I am not just sucking your *beep*, but could you please update the firmware on this modem (DPC 3008). There are a lot of people that are having issues with losing their internet connection when it comes to this modem. It doesn't matter who the ISP is, doesn't matter what we try to do to fix this. I read somewhere that after you updated the firmware in 2011 on this modem is when your customers starting having issues. Now I just bought this modem a few weeks ago so I don't know for sure. All I can say is if this issue doesn't get resolved, I am going to smash the *beep* out of it and never recommend your products to anyone as well as never purchase another product from you. I like you I really do, but I am tried of losing my internet connection when I am playing my games or watching movies. People have stated that they removed your modem for a different brand and their issues were resolved. I am giving you a chance to show me that you value your customers and you will resolve this issue in a timely manner
View 2 Replies
View Related
Nov 30, 2011
Lose internet connection at least once a day. Each time regaining by unplugging power cord for approx. 10-12 seconds. Is this a router failure and maybe needs replacing or ?
View 2 Replies
View Related
Apr 20, 2011
I have what I feel is sort of a strange issue. When I have systems on my home network get their IP from DHCP, they can get to the internet just fine. But it seems that when I assign a static address, they have local network access only, and will not get a connection to the internet. My windows 2008 server is the big problem with this one.
View 10 Replies
View Related
Nov 3, 2011
I have a very well updated Laptop running XP well patched with IE7.I have run all the malware scans and there is nothing wrong on the PC.After exactly 10 minutes of the PC being on, wireless internet connection is lost, BUT:Signal Strength states "Excellent" I can't access any website at all on the web. (Except for "Facebook" for some odd reason?) I can't access it after the 10 minute mark but if I'm already on it, I can navigate thru it's site without being disconnected, don't ask me why I have tried the following:
- Dynamic and Static IP setting
- Turned on and off windows firewall and rebooted each time
- Ran all kinds of malware detection and virus scans
- Disabled power management on network card
- I've tried different PCs on the same network and they're fine
- Tried ipconfig release and renew
- Tried repair connection
- Tried netsh reset
- Tried FireFox and other browers
- Logging off and back in doesn't work, must restart the computer to get another 10 minutes
View 6 Replies
View Related
Jan 3, 2013
So i setup an Asus RTN66U router with an HP 1800 24 port switch. Ive got 2 PC's,xbox,cablebox, and wii(wireless).about every 5 minutes or so, it seems I lose connection. Its very apparant when I play BF3 cause it will close the game and say connection with server timed out.My question is how should I troubleshoot this. How do i pinpoint router, switch, or modem or something im missing.
View 9 Replies
View Related
May 27, 2012
Dlink Dir-657 keeps losing internet connection on wifi devices only . the connection remains to the router but no internet .if I disconnect the connection i am unable to reconnect to the router until i reboot it. My internet remains on my network cabled devices .I am running on an empty channel 3 , usually happens 20 to 60 minutes after the router is up . Dlink sent me a replacement refurbished one and this one is doing the same thing . I owned the original one for about 5 months with no problems at all ,no new electronics in the house and have not changed the placement of the router .
View 4 Replies
View Related
Mar 21, 2012
I am currently having issues with the dhcp function on my DIR-615. The issue is some of my devices are never able to connect unless I set them up with static ip. Some of my devices are sometimes able to connect using DHCP but sometimes need to be set up with a static IP. In the log it says something along the lines of "sent out offer for IP 192.168.0.XXX" but the devices never receives the IP. The firmware says it is up to date. The hardware version is C1. Some of the devices having issues are PC's some are Macbooks and some are iphone and ipods. I'm not sure if it is related but when I look at who is using WAN some of the pc's who are connected to the internet have an ip address of 0.0.0.0.
View 3 Replies
View Related
Jan 20, 2012
We are a small business with about 9 Macbook pros and 3 PC's connected wirelessly to the router. The Mac-computers sometimes lose their wifi-connection to the router. When this happens they have to select the wifi network again from the menu, to reestablish their internet connection. For some of the clients, this happens about once each day and for others multiple times a day. The problem doesn't seem to appear on the PC's.
I have tried to solve the problem by making DHCP reservations for each computers MAC-address, but with no luck. I also tried to set the 802.11 Mode to 'Mixed 802.11n and 802.11g', and turning WISH off. I read that the connection can be disturbed, if other wifi-networks in the area uses the same channel, so I changed it to channel 3, based on a scan of the network, where 3 appeared to be the least used. The WPA Mode is set to 'WPA-2 Only' and Cipher type is 'TKIP and AES'
The Dir-655 is hardware version B1 and the firmware is 2.0.
View 13 Replies
View Related
Mar 19, 2012
We are having several workstations that are momentarily losing connection to our Windows Server 2008 machine that hosts their Documents etc.It seems like a momentary disconnection and not everyone has complained although I'm guessing that unless you are trying to locate a file etc at that moment you might not notice.Here is the error message I see in the event logs on the server:
-Source: srv
-EventID: 2012
-Level: Warning
While transmitting or receiving data, the server encountered a network error. Occassional errors are expected, but large amounts of these indicate a possible error in your network configuration. The error status code is contained within the returned data (formatted as Words) and may point you towards the problem.So, where would you guys start with something like this? Either my HP Procurve 1800-24G doesn't have much in the way of error logs, or I don't know where to look.Would you start with changing port on the switch, changing network cable or do you think it's more likely to be something on the server itself?
View 6 Replies
View Related
Feb 27, 2012
I am trying to setup my Internet connection on my linksys E1200 router using static IP settings below -I am getting following error when trying to do this. These are the IP settings provided to me and are configured on my laptop to connect to my ISP as well.
View 6 Replies
View Related
Aug 13, 2012
Trying to split a supplied fixed IP address to multiple wireless devices so that I can piggy back on the internet connection in my office. Cause the IT dept refuse to provide a router.I plank to use a router for the job above.
View 4 Replies
View Related
Oct 26, 2011
I have a DIR-825 router series b, with firmware 2.05NA.My desktop is running vista 64Bit.I want to use my xbox 360 as a media center.I lose my connection between my xbox and my computer whenever the xbox is turned off. I can connect, and it works well, but only after I uninstall the extender from Media Center, then restart my computer. Then it sees the xbox on the network. I then have to set up a new connection. This is done over wireless N using the 5ghz band.The connection holds until my xbox is turned off. Then when I turn it back on it does not see the connection to the Media Center.
I updated the new firmware (my previous firmware was 2.02NA). I updated to 2.06, but then went back to see if that would make a difference and it didn't. The xbox can connect to xbox live and the internet (netflix etc...) but it does not see the home network to allow me to stream media between the computer and the xbox.I have disabled the firewall on my PC, I have disabled SPI, and do not have any other firewalls running on the network.
View 11 Replies
View Related
Feb 27, 2013
I have a RV120W used to provide VPN access to several industrial devices. Some of these devices are assigned IP address via DHCP in the router. One cannot do DHCP, so it has a self-determined static IP.
The VPN works well for all the devices that are assigned IP's. However, it does not allow me to connect to the device that has a static IP. I can connect to it fine when I am on the LAN or WLAN, but cannot ping it via the VPN.
View 2 Replies
View Related
Sep 27, 2012
I got a new router, a Cisco Linksys EA3500, and everything works fine and no one else in my family notices anything. Everything works and I don't have trouble accessing the internet and I always get 5 bars, but whenever I play a game online it will disconnect me after a while. Sometimes it disconnects me after 5 minutes and sometimes after 30 minutes. The only games I play are Arma 2 and Garry's mod and I have the same problem with both games. The weird thing is that I talk to friends on steam when we are playing and it doesn't get disconnected I can hear them fine, and my internet access bar at the lower right doesn't say I'm disconnected. Streaming and downloading work as well. I have no idea what to do, we got a new router because the old one was faulty and we called our isp and they said there was nothing wrong on their end it.
View 1 Replies
View Related
Nov 12, 2012
I have an hp wireless printer. everytime i shut down or lose connection, i have to reinstall printer. Why won't it save to my laptop?
View 2 Replies
View Related
Mar 23, 2013
N600DB - Currently configured with primary computer hardwired to router, 1 laptop via WiFi, a Network booster used by iPhone/iPads and every time I wake the primary computer I get the Router Monitor alert that my internet connection has failed. By the way, I am currently using the primary computer to post this and the Belkin Router Monitor still says my "internet connection has failed" and An Internet connection cannot be established at this time. Re-booting your router may solve this problem, but you will temporarily lose your connection during the reboot.
View 1 Replies
View Related
May 5, 2013
I have two 2960s that periodically lose connection for just a few Seconds. If I run a continuous ping from a workstation the connection never drops but as soon as I kill the ping command I will start losing the connection again. All cables test fine tried different switch ports nothing seems to work. No errors in log file either.
View 6 Replies
View Related
Aug 31, 2011
I installed the E1000E with L2TP (the ISP forces me), and since then I have disconnections, bad bad response times,
View 1 Replies
View Related
Jan 2, 2012
we have a WLC 4404, Software Version 4.2.61.0 and the following Problem. The WLC worked for many years with the SSID "SKHGR". In addition to the existing SSID I have a second SSID "SKHGR-M" is created. The configuration of the two SSID's is identical.
The problem is: when I activate the second SSID, the AP losing connection with the WLC. In the log appears"AP disassociated. ... Base Radio" and "
"not advertising ssid due to radio policy". The AP's connect with the WLC, lose after few seconds the contact.
View 3 Replies
View Related
Jul 10, 2012
Reciently I bought a WRT120N Router to get a better internet connection and to have more capacity to connect different wireless devices, because the modem from my internet provider company is extremely restrictive.
I use an iMac, a Notebook with Windows 7 and a Netbook with Ubuntu 11.04, besides different devices (iPhone, iPod, PS3, Kindle). Although when I configured the router I connected every devices simultaneasly, with better signal quality than before, after using it for a couple of days I found that it disconnects itself, I can't access internet, and my only solution it's to switch it off and on.
View 1 Replies
View Related
Nov 5, 2012
It seems that whenever I go on newegg, I lose my internet. It will regain signal quickly, but is a huge annoyance. I cannot shop nor look at parts pricing without this disruption. It is only when I am on newegg does this happen.
View 1 Replies
View Related
Nov 29, 2011
which current SB routers support these features known from RVL200 and RV0XX v. 1.X?:
Block MAC address on the list with wrong IP address
Block MAC address not on the list
View 1 Replies
View Related
Feb 2, 2012
I have been using a Linksys E3000 router for a few months now. Love it. But this last week, when ever I wake my monitor up after it's power saving mode kicks in, I lose my internet connection for about 15 seconds. If you look at the router before the monitor is on, I am connected. The light is on for port 1. But as soon as my monitor gets turned back on, it light just turns off and will reconnect after about 15 seconds. I've looked it up online and can only find things about when the entire system wakes up, and usually those people have to reboot their entire system to get a connection again, or turn the router off then back on. Using Windows 7?
View 4 Replies
View Related
Mar 12, 2013
I am running winsxp prodessional.I have a belkin N600 DB Wireless N+ Router and it is hooked up to a vmax 480 security syestem . this system allows me to see the cameras remotely on my ipad, i iphone amd laptop .
my problem is this the router shuts down and restarts( it must be programmed to do this ) and i lose the remote connection to the cameras. if i am home i can unplug the vmax and it will restart and find the router etc however when i am traveling i can not do this.
View 1 Replies
View Related
