Linksys Wireless Router :: WRT120N - Devices Lose Connection To Internet
Apr 18, 2010
I have a disconnecting problem with my WRT120N (Linksys) wireless router. Sometimes all wireless devices lose the connection to the internet, and the access to the router administration page (192.168.1.1) becomes impossible. In this case LEDs of power, internet and wireless are lighting without flashing. This problem usually occurs every 48 hour, and there was no way to make a reconnection except turning the router off by unplugging the power wire and plug it again…
I hope find a solution for this problem here
Other question: are there any problems in Firmware Version: v1.0.04
Note: currently I use Firmware Version: v1.0.01
View 9 Replies
ADVERTISEMENT
Jul 10, 2012
Reciently I bought a WRT120N Router to get a better internet connection and to have more capacity to connect different wireless devices, because the modem from my internet provider company is extremely restrictive.
I use an iMac, a Notebook with Windows 7 and a Netbook with Ubuntu 11.04, besides different devices (iPhone, iPod, PS3, Kindle). Although when I configured the router I connected every devices simultaneasly, with better signal quality than before, after using it for a couple of days I found that it disconnects itself, I can't access internet, and my only solution it's to switch it off and on.
View 1 Replies
View Related
Dec 3, 2011
I recently upgraded my Linksys wrt120n router firmware & had to reconfigure settings. Subsequently, some (but not all) of my apple devices are having intermittent wireless connection problems. Specifically, my ipad1 & ipad2 never lose their connection but a mac book pro (~ 2 years old), iPhone 3g, iPhone 4, older iPod touch & very old i book g4 all work for a period of time (usually 1/2 day) & then lose their connection. When I attempt to reconnect these devices I receive the following error..."unable to join the network xxxxxx....". I also have a Dell laptop (1 1/2 yrs old) that generally does not have the connection problem. Finally, when the devices do lose their network connection all I have to do to reconnect is go to the Linkys router setup webpage & click on save & the wireless connection works again (almost like this is just refreshing the connection for these specific apple devices). I was not having any problem prior to the firmware upgrade & from what I have read the older firmware version is no longer available so going back to the old firmware does not appear to be an option.
View 1 Replies
View Related
Mar 26, 2013
I have a Cisco WRT120N Router and a Cisco Valet AM10 wireless adapter. Almost every time the computer reboots, I loose my network and I have to redo the AM10 setup. The AM10 is the only device that loses the connection, my lap top and printer do not lose the connection.
Problem 2: Everytime I upplug and replug the AM10 a window pops up saying I need to check the drive for errors but none
are found.
Problem 3: I downloaded the AM10 install program, Downloadable.Setup.AM10.1.2.10148.2. It does not work. If I try to run it Iget an error message that the setup canot be completed and to call in for support.
Problem 4: When I can get it working is shows that it is Wireless Connection 5. Why 5 and not 1? Where are the other 4?
<script id="overlay_tmpl" type="text/html">// <div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> // </script>
View 5 Replies
View Related
Oct 16, 2011
I have a WAG160N with firmware V1.00.16 (version 1 device).The router is connected via ethernet to my main iMac running Lion 10.7.2, although the issue's I'm having have occurred for some time before upgrading to Lion or its's latest update.Firstly, devices I connect to the router wirelessly such as my iPad and iPhone will allow me to use the internet on said devices for about ten minute then the internet will simply stop. The device is shown as connected (checking the wifi settings on iPad etc show the router is still seen). If I switch WI-FI off on the device, then back on, internet is restored. It's not an internet provider issue as I can use the net all day on my ethernet-connected iMac without a problem.My printer is connected to my iMac via USB and shared with other devices. It is seen on my Macbook which connects wirelessly via the router. If I try to print from the macbook, the print job will not progress until I re-start the router. Likewise, there are applications that I sync between my ipad and iMac via iTunes with my mac connected via the USB cable. The iPad will not bee seen by the iMac unless I re-start the router. My Apple TV will only sync wirelessly with the iMac if I re-start the router.
View 1 Replies
View Related
Jul 13, 2011
There is going to be 2 computer and a router each with there own static public ip address (ie 68.x.x.x range) The issue i am running in to is getting the netgear set up correctly, every time i disable the dhcp server on the netgear and set up all 3 devices with the static ips i lose internet connection. If i leave the set work set up as dhcp on the lan side and keep the wan static ip it all works fine.
Hardware list
2 windows 2000 pro
1 netgear model FVS318v3
View 4 Replies
View Related
Jul 23, 2011
Router 1: I have a WRT120N wireless router connected to the Internet. It has IP 192.168.1.1 and DHCP is enabled with address range 192.168.1.100 up.
Router 2: I have a WRT310N router connected to the LAN via LAN port to ethernet jack in the wall (not WAN/Internet port). It has ip 192.168.1.2 and DHCP is DISABLED.
All the devices on my network can see each other. Devices connecter to router 1 can see devices connected to router 2.The problem is, devices connected to router 2 cannot get to the Internet. I verified clients connecting to router 2 are assigned the same DNS addresses and the same gateway 192.168.1.1 as the clients connected to router 1. But for some reason router 2 doesn't know how to router Internet traffic out through router 1?
I tried plugging the LAN cable into the Internet/WAN port on Router 2 but then devices on Router 2 can no longer see devices on Router 1. I've seen discussions of setting up router 2 on its own subnet: 192.168.2.1 instead of 192.168.1.2 but then supposedly devices on router 2 will still not be able to see devices on router 1.
I'm guessing router 2 can't access the Internet because it is default configured to send Internet traffic to the Internet port, no t the LAN port. how to configure it so all devices on both routers see each other and router 2 devices can get to the Internet.
View 3 Replies
View Related
Nov 30, 2011
Lose internet connection at least once a day. Each time regaining by unplugging power cord for approx. 10-12 seconds. Is this a router failure and maybe needs replacing or ?
View 2 Replies
View Related
Sep 13, 2011
I’ve bought a router, and a wireless antenna for my laptop, since I have a high-speed internet outlet in the living room, but I use my laptop in the kitchen (I don’t have any other pc). So I’ve configured my Linksys WRT120N router in the living room, unplugged the ethernet cable from my laptop, plugged the wireless antenna in the kitchen, and everything was working fine with the wireless network. After about one month I was not able anymore to enter my network with the security key, there was actually no prompt for the security key, just a message “Cannot connect to the network”. I then had to reconfigure the router, going to the router IP address (I used the default settings, a blank for username, and “admin” as a password, as per instructions), use another network name, security key and password, and was able to start again a wireless network with the wireless antenna as before. This problem represented other 3 times (in the last 3 months), and was working fine, but now I cannot reconfigure the router anymore, since the IP address doesn’t accept BLANK/ADMIN anymore, and if I go ahead and reconfigure the router a message says I have to use the default settings in the IP address…
View 2 Replies
View Related
Apr 25, 2010
I often loose internet connection recently while online. I always check my status on 192.168.1.1 when this happen to see if i'm getting 0's ISP but it does not say that.I also tried ipconfig/release and renew I also tried right click wireless icon and click "repair"Power cycle always worked for me in the past but today to my dissappointment it did not.after power cycling I check my status on 192.168.1.1 and now it indicates 0's.
View 9 Replies
View Related
Nov 28, 2010
My wireless router will work for 6- 8hrs then drop the internet connection. I have to cycle the modem and router several times to restore the connection. I am also using a Netgear Access Point.
I am using:
Charter High Speed Internet
Motorola Modem
Cisco Model WRT120N Router
SETTINGS
Mode- Mixed
Channel Width- Auto 20MHz or 40MHz
Security- WPA2 Personal
SSID Broadcast- Disabled
Firmware Version v1.0.04
Connection Type- Auto Conf DHCP
Beacon Interval - 50
Fragmentation Threshold 2304
RTS Threshold 2304
All other setting are at factory default.When I unplug the modem from the router and plug it into the desk top I have internet service.
View 6 Replies
View Related
Feb 4, 2012
- I am losing internet connections at least 1 time/ day. I have 2 wired and 2 wireless devices.
- when the internet is down I am connected to the router (wireless and wired, the connection is not lost/cable unplugged..).
- only when I power cycle the router I recover access to my admin page and internet connection.
* Firmware Version 1.0.06
View 5 Replies
View Related
Dec 26, 2011
Router config and i just follow the instructions anyway i just bought this router cuz the old one failed and it was installed ok with internet connection and everything but when i open a program like bittorrent azureus the internet connection dies, it happens on my laptop and mac they both seem ok but when i open that program internet connection disappears
View 1 Replies
View Related
Jul 28, 2012
We have Cable DSL modem that connects to router. One wired connection from router to PC. Wireless devices are 2 iphones 2 ipads and 2 imacs. Constantly having to power the WRT120N off and back on to regain connectivity.
View 2 Replies
View Related
Dec 26, 2012
I just installed an older router (WRT120N). Purchased an adapter for desktop and wireless connection for destktop works. Cannot get other devices to use the wifi (iphone, ipod, android phone...). I am at a loss. Saw some suggestions about disabling a Upn or something under the router's LAN properties
View 1 Replies
View Related
Aug 31, 2011
I installed the E1000E with L2TP (the ISP forces me), and since then I have disconnections, bad bad response times,
View 1 Replies
View Related
Feb 24, 2013
I do love your products and I am not just sucking your *beep*, but could you please update the firmware on this modem (DPC 3008). There are a lot of people that are having issues with losing their internet connection when it comes to this modem. It doesn't matter who the ISP is, doesn't matter what we try to do to fix this. I read somewhere that after you updated the firmware in 2011 on this modem is when your customers starting having issues. Now I just bought this modem a few weeks ago so I don't know for sure. All I can say is if this issue doesn't get resolved, I am going to smash the *beep* out of it and never recommend your products to anyone as well as never purchase another product from you. I like you I really do, but I am tried of losing my internet connection when I am playing my games or watching movies. People have stated that they removed your modem for a different brand and their issues were resolved. I am giving you a chance to show me that you value your customers and you will resolve this issue in a timely manner
View 2 Replies
View Related
Mar 2, 2012
I have had numerous issues with my E3000 since I got about two months ago and they have all been resolved with the exception of this new one that popped up today.
My Samsung Blu-ray player is connected firectly via ethernet cable to the router. When it's on, I lose all conenctivity to the router with my wireless devices including three PC's, a PS3, two iPhones, one iPad, one Samsung Smart TV, one XBOX 360 and an Onkyo Receiver. When I say that I lose connectivity, I don't mean that I lose access to the Internet. My PC's see the network but cannot connect to it, the same goes for the Apple devices. The moment I shut off the Samsung BD player it kicks right back on and works normally. Until today, this never occurred.
I contacted Tech Support and they had never heard of this happening before. They suggested that I change the ethernet cable which I did while the unit was on and it worked until I turned the BD player off and turned it back on again. I also tried switching ports to no avail. Alos all of the software is up to date on both the router and the BD player.
View 3 Replies
View Related
Mar 29, 2012
I have an E1550 less than 1 year old. Lately, I have been losing internet on the AT&T modem. I called AT&T but as part of their diagnostics, I have to plug the modem directly into the PC. I have loaded the latest firmware to the E1550.Lose Internet but wireless connectivity to router exists.Internet light on modem is out (modem is connected to router)Unplug modem and leave off plug in, internet light is still out.Unplug router, plug router back in - no internet connection but do have wireless connectivity to router.Take cable from modem to router and plug directly into PC internet light comes on in modem and I have internet from PC.Take cable from PC and plug back into router .I have internet via wireless.What I can't figure out is what could be happening in router that would impact modem internet connection. I have replicated this at least 3 times. Yes, the modem is a bit old, but since plugging it directly into the PC works, I'm thinking it has to be the router and I cannot figure out why unless there's some sort of electrical thing going on in the router.
View 4 Replies
View Related
Dec 9, 2012
I have 2 laptops and 1 desktop all connected to the same router, the 2 laptops are connected via wifi and the desktop PC is currently connected via an Ethernet cable, both laptops run windows 7 while the desktop runs windows XP and more or less every time the desktop is booted after a few minutes of normality connection to the internet is lost and the yellow triangle on windows 7 appears so to fix this I have to go into my routers settings via 192.168.1.1 and reboot which then solves the problem and all machines function as they should including the desktop.
View 2 Replies
View Related
Sep 3, 2011
I have several computers and printers connected to a WRT120N router which is connected to 10mpbs DSL. The computers are all running WIN7 and are hardwired to the router. On the one PC, it keeps losing network connection. I've tried upgrading the router's firmware, reset, etc. to no avail.
I think it may be related to the same IP address being assigned to multiple machines connected to the router. Is there a way to set specific IP addresses to each item connected to the router to see?
View 1 Replies
View Related
Aug 21, 2011
I can hardwire to my modem and get internet but when I try using the router it can't find it. Everything was fine yesterady with router. What I noticed is when I plug the router in to reset it before plugging any ethernet cables in the port 1&4 lights were blinking like there was activity
View 1 Replies
View Related
Nov 24, 2009
I recently purchased the WRT-120N router for my home network. The wireless is set to mixed mode, with WPA Personal encryption, with key renewal set at the default 3600 seconds. My problem is that the connection is not stable. I can be connected with one computer, then, as soon as another computer joins the network, I get kicked off. This happens with all of my 5 computers. In addition to this, several of my computers will not automatically connect to my network after the computer is restarted. When I try to reconect manually, it says the network is unavailable. The only way I can get back on is if I go into "Control PanelManage Wireless Networks" and delete the setting for my network, then connect again through the "Connect to a network" window.4 of my computers are running Windows Vista with a minimum of Service Pack 1. The Other is running XP with Service Pack 2.
View 9 Replies
View Related
Nov 30, 2011
I'm capped out at 12 mbps service through Mediacom. My PC is directly wired to the WRT120N. I consistently test in the 11 mbps range.
I have a very unusual issue though.
I can connect my iphone and Xbox wirelessly through my router with no issues on their side. However, any time I do so, it kills my wired connection on my PC. I'm not doing huge downloads or P2P or anything like that. In fact, the speed drops immediately on my PC the moment I connect my phone to the wireless network regardless of what i'm doing on the phone (checking email or loading a webpage).
View 2 Replies
View Related
Nov 15, 2011
I have a WRT120N, and have set up connections like this:
Desktop PC: Hardwired Ethernet
Laptop: Wireless
Xbox 360 (1): Ethernet
Xbox360 (2): Wireless
Networked Printer: Wireless
The hardwired connections are fine, but at random the Printer, laptop and wireless Xbox connections will drop out and i'll have to reboot the router to get it working again. I've tried everything I know of (i.e., Static IP, Port Forwarding) as well as a factory reset, but I continue to have this issue.
View 1 Replies
View Related
Apr 17, 2012
I have a Linksys WRT120N wireless router that I have had for almost three years now. It recently has started dropping all internet connections very randomly, sometime multiple times in an hour. I will lose my connection to the internet and connection locally to other laptops then it will reconnect. It is also disconnecting when wired as well as I have a playstation using a wired connection out of the router and it loses connection all the time as well. What is causing this, I am pretty sure it is the router and not my internet service.
View 8 Replies
View Related
Jan 23, 2011
I have a WRT120N router .It has something to do with turning on or re-introducing certain wireless devices into the area. When I come home with my iPhone & my wife is on her computer, suddenly the wifi stops. And vice-versa. It's ridiculous. I'm not a computer programmer but if I was I'm pretty sure this would be a no-brainer to fix. Especially if the company that paid me took pride in their products.
View 8 Replies
View Related
Apr 9, 2012
my router drops connection several times a day. I have to unplug the router every day so that my devices can stay connected. I hate when this happens late at night when i'am upstairs and have to go 2 stairs down to get internet on my devices. For example if i want to connect my iPhone to my Wireless network it gives me an error with: 'No connection can be astablished with this network'.
View 1 Replies
View Related
Jul 16, 2011
I have an internet connection of the speed of 384 kbps, settings are default i changed nothing. firmware is updated. i'm using wireless connection.any settings you will recommend like in MTU, Beacon Interval, RTS and fragmentation?
View 2 Replies
View Related
Feb 2, 2012
I have been using a Linksys E3000 router for a few months now. Love it. But this last week, when ever I wake my monitor up after it's power saving mode kicks in, I lose my internet connection for about 15 seconds. If you look at the router before the monitor is on, I am connected. The light is on for port 1. But as soon as my monitor gets turned back on, it light just turns off and will reconnect after about 15 seconds. I've looked it up online and can only find things about when the entire system wakes up, and usually those people have to reboot their entire system to get a connection again, or turn the router off then back on. Using Windows 7?
View 4 Replies
View Related
Jul 29, 2012
I have a Linksys Wireless-N Home Router, WRT120N to be exact, and I have been having problems with my wireless. My wifi losses internet connection intermittently. This does not happen when I am connected directly to the router with a Ethernet cable. I have redone all the settings many times(like 6) and Im still having the same problem.
I really dont want to have to buy a new router
View 8 Replies
View Related
Oct 13, 2011
COX cable was out yesterday doing some work outside our apartment building. Now, our CISCO LinkSYS WRT120N won't work. I was working before COX cable came out and has been working without problem for the past two years.When I plug the harddrive into slot 1 in the back of the router, "4" lights up. When I plut it into slot 4, "1" lights up. When I plug it into slot 2, "3" lights up, and when I plug it into slot 3, "2" lights up.I tried the router software, but when I reach the plug the router in step, the soft ware returns after a couple minutes and says it cannot locate the router, even though the router lights are on.
View 8 Replies
View Related
Nov 9, 2011
I have the CISCO Linksys Wireless Router Model Number: WRT120N. My laptop is finding the router, and connecting to it fine. However, when I try to log onto the internet, it says no internet connection (same in the available net work section in the menu bar).Internet (Charter) they have checked the modem and there is no issue. I have also plugged the Ethernet cord directly from the modem into the computer, and unable to access the internet.
View 6 Replies
View Related
