Why Does Wireless Printer Go Offline Every Time Shut Down Or Lose Connection

Nov 12, 2012

I have an hp wireless printer. everytime i shut down or lose connection, i have to reinstall printer. Why won't it save to my laptop?

View 2 Replies


Lose Internet Connection Every Day In The Same Time?

Sep 29, 2012

I lose internet connection every day in the same time etc.i lose it in 2pm and i get it in 7.pm and tomarow again lose it in 2pm get it in 7pmit is not virus i have cleaned every infection whit Malwarebytes,Emsisoft,Hitmanpro,SuperAntispyware and Spybot

View 4 Replies View Related

Linksys Wireless Adapters :: WRT120N - Lose Wireless Connection Every Time The Computer Reboots?

Mar 26, 2013

I have a Cisco WRT120N Router and a Cisco Valet AM10 wireless adapter. Almost every time the computer reboots, I loose my network and I have to redo the AM10 setup. The AM10 is the only device that loses the connection, my lap top and printer do not lose the connection.

Problem 2: Everytime I upplug and replug the AM10 a window pops up saying I need to check the drive for errors but none
are found.

Problem 3: I downloaded the AM10 install program, Downloadable.Setup.AM10.1.2.10148.2. It does not work. If I try to run it Iget an error message that the setup canot be completed and to call in for support.

Problem 4: When I can get it working is shows that it is Wireless Connection 5. Why 5 and not 1? Where are the other 4?

<script id="overlay_tmpl" type="text/html">// <div id="<%= overlayId %>" class="_mp3rocket_overlay_style" style="left: <%= overlayLeft %>; top: <%= overlayTop %>; width: <%= overlayWidth %>; height: <%= overlayHeight %>"></div> // </script>

View 5 Replies View Related

Linksys Wireless Router :: E2000 Internet Access Is Not Affected When Printer Appears To Be Offline

Jun 10, 2011

I've got a Linksys E2000 router and a Brother MFC-7840W wireless printer and they don't seem to want to play nice together.  The set-up process was fine and I can usually print wireless without a problem, but every so often I'll try to print and my computer will say that the printer is offline.  Other computers on my network also show it as offline. The printer confirms it has an IP address, but even after power cycling it won't be picked up by my machines.  I've even tried a full reset of the printer and re-configured it, at which point it is able to successfully obtain an IP address, but it still shows as offline on my PCs. 
The only solution I have found is to powercycle the router.  This always works.  Now that's not a terribly inconvenient workaround most of the time, so I've been doing that for a few months now.  It obviously implicates the router as the point of failure, but wireless internet access is not affected when the printer appears to be offline, so obviously some packets are getting through normally. 

View 3 Replies View Related

Printer Offline After Reboot?

Jul 11, 2011

I've got 3 computers (2 desk 1 lap) all running Windows 7. I have 2 network printers. The printers are wired to one of the desktops and the other 2 computers connect via network. The printers work fine once I add them to each computer, but once I restart, the printers appear offline on the other 2 computers even though they work fine on the desktop to which they are wired.I've had this setup for a while and only recently this started happening. It looks like Win7 is messing with the IPs of the printers. I'm not an expert on how to find the IP addresses of the printers though and set them to static (if this indeed is the problem)

View 12 Replies View Related

6490 CW Printer Is Offline?

Mar 24, 2012

Our 6490 CW printer is offline, it went office for the XP laptop connected a few weeks ago and now the Windows 7 desktop shows it as offline, so we cannot print at all. Tried to re-establish factory setting on the Menu for wireless and then res-et the wirless configuation.It finds the SSID but after typing in password etc it cannot estbalish a connection?

View 1 Replies View Related

Cisco Switching/Routing :: 3550 - Shut Down Ports Not In Use For Specified Time Frame

Aug 24, 2009

Is there a way to configure a switch (3550, 3560,3750) to disable a switch port if it has not been used for a specified time period such as weeks or months. Say you want the switch to disable switch ports that have been "abandoned".

View 8 Replies View Related

MFC-5895CW Printer Says Its Offline And Not Print

Oct 19, 2011

Recently forgot my wireless password so i reset it and ever since then my printer says its offline and wont print.IVE TRIED UNINSTALLING IT AND REINSTALLING IT but whenever i got to control panel and add printer it never finds it.its definately connected to my wireless because it says connected on the printer.

View 14 Replies View Related

Samsung CLX-6220FX Printer Offline?

Jan 2, 2013

I have just moved printer locations and am with a satellite and not broadband now.My printer shows Network Printer is not availble and offline. How do I fix this. I have restarted comptuer, looked on line but to no avial

View 3 Replies View Related

Network Printer Offline After Reboot

Nov 23, 2012

I have 2 XP machines, both connected to a network switch which connects them to a print server attached to a printer. The last print server recently died and has been replaced, but the problem remains. I've downloaded the driver from the printer manufacturers website and installed on both XP machines, one functions fine but after each reboot the printer is grayed out on the other. Removing it and adding again fixes this until the next reboot.I am aware of some networking issues at this site which result in a few dropped packets between sites but shouldn't be an issue here since they are all attached to the same switch.

View 13 Replies View Related

HL-3070CW Printer Always Go To Offline Mode?

Jul 20, 2011

My HL-3070CW printer allways go offline, I have to reboot the system again befor it will print i don't know why,it's a network printer and it happens in one of the system that uses it not all the system how i resolve it.

View 4 Replies View Related

Windows 7 Network Printer Going Offline?

Jan 11, 2012

I pressed a button and tried to print off line. I don't know that to do to get it back online

View 1 Replies View Related

D-Link DIR-655 :: Wired Printer Seen But Offline

Jan 2, 2012

Just upgrade from an old DIR-524 (or something like that) to a DIR-655.  Set up was easy all is working good with the computers.  |However, I plugged my HP Photosmart C5100 printer into the router (first slot).  The computer seems to know it is there, and the printer seems to recognize the router, but it will not printer.  Microsoft diagnostics says that the printer is not ON, and the printer is listed on Devices as Offline.  The printer is about 5 years old, but it is a trooper and I don't want to to get rid of it. 

View 7 Replies View Related

Network HP LaserJet CP3525 Printer Is Offline

Mar 30, 2011

I have HP LaserJet CP3525 network connected, it was connected and configured, and was working good. But now it's not avaliable, it just states OFFLINE. But it's coming up when turning it off and on again, for a few minutes, and then goes down again...

View 2 Replies View Related

Hp Deskjet 3050 Wifi Printer Keeps Going Offline?

Jan 19, 2011

We have an HP DeskJet 3050 wireless printer connected by WiFi to two laptops. One laptop, a Dell 700m, runs XP Pro with all updates applied. The other laptop, a Dell XPS 15, runs Windows 7 64-bit, again with all updates applied.The printer works completely reliably from the XP machine. From the XPS 15, the printer works reliably for a day or so, then the icon in Devices & Printers is grayed, indicating the printer is offline. Even in this condition, I can access the printer's built-in web server using Firefox on the XPS 15 and the connection appears to be fine. The printer's IP address has not changed. But the printer is still reported as offline for printing by Windows.

The workaround is to delete the device and reinstall it using Add Printer and Have Disk, but using the already installed drivers rather than re-installing. After doing that, the printer then works for a few days before again going offline.This problem is extremely irritating. I've done Google searches on this problem. Although I've found a variety of similar reports for various brands of wireless printers on Vista or Windows 7, I've not seen a solution. My latest attempt is to share the printer on the Dell 700m and print to the shared printer from the XPS 15. We'll see if that continues to work for a few days (I suspect it will). But this isn't really a solution and not always convenient.

View 3 Replies View Related

Homeplugs Lose Speed Over Time?

Feb 4, 2013

I have a home plug network that goes like this:ndy's Room is my room, that homeplug goes into a switch that splits out to my PC and a wireless access point. Office goes into the main router that the internet feeds into. The living room connects to the TV, Sky box and PS3.Occasionally, the link rate LED on my plugs will drop to orange

View 1 Replies View Related

HP C7250 Printer Connected To Local Network Gone Offline?

Oct 27, 2011

I have an HP C7250 printer connected to our local network. Both my computer and the printer say it is online. The print que says it is off line. I can't print anything.

View 1 Replies View Related

Wireless :: Internet Connection Goes Off When Computer Is Shut Down?

Apr 30, 2012

My internet connection goes off when computer is shut down

View 1 Replies View Related

Canon Mp560 Printer Offline From Windows Toshiba T115-S1100 Laptop

Oct 3, 2011

I have recently moved and am trying to connect my Toshiba T115-S1100 laptop with my wireless Canon MP560 printer. I keep receiving "printer offline" messages. Is this a compatibility problem, or have I not set something up correctly?

View 2 Replies View Related

Security / Firewalls :: Lose Internet Access Every Time Enable SPI Protection?

Aug 12, 2011

So, I have this router at home a WRT150N. I put in access restrictions so my siblings won't stray onto unwanted pages.I enabled SPI Firewall Protection and what do you know, it worked. The next day though, we didn't have an internet connection.I checked everything with the modem (power cycles, etc.) and then I tried the router. Upon disabling SPI Firewall Protection, the internet connection came back.I tested it yet again, to see if it really was the SPI. Enabled and bam, no internet access again. I made sure to select "Allow" in the Access Restrictions for "Internet access during selected days and hours" making sure also that "Everyday" and "24 Hours" are selected.Now my question is, what do I need to do in order to enable my Access Restrictions without having to lose internet connection via the SPI Firewall?

View 2 Replies View Related

Cisco WAN :: 1811 - Automatic Shut And No-shut Interface

Jun 27, 2011

I have a cisco 1811 with 2 isp. i want to shut down an interface when a IP is not responding anymore and to “no shut” when the ip is back online. Here what I make: the interface go shut when not respond but never came up when is back online.

track 100 rtr 99 reachability
delay down 10 up 60
! consider it "down" if down for 10 secs, consider it "up" if up for 60 secs


View 3 Replies View Related

Linksys Wireless Router :: WRT54GS - Reset Security Button Completely Shut Out Connection

Oct 3, 2011

I was in the Wireless tab>Basic Wireless Settings and then I clicked the "Reset Security" button.  I don't know what that did but I've been completely shut out of my connection ever since and I don't know how to fix it. I tried doing the install sequence of the router just now (Clone MAC address, then release and renew DHCP, power cycle modem, router, and PC) but it still didn't work.

View 1 Replies View Related

Linksys Wireless Router :: Wrt54g2 - Lose Internet Connection At Least Once A Day

Nov 30, 2011

Lose internet connection at least once a day.  Each time regaining by unplugging power cord for approx. 10-12 seconds.  Is this a router failure and maybe needs replacing or ?

View 2 Replies View Related

Linksys Wireless Router :: Bad Latency And Lose Connection To E1000

Aug 31, 2011

I installed the E1000E with L2TP (the ISP forces me), and since then  I have disconnections, bad bad response times, 

View 1 Replies View Related

Cisco Wireless :: 4404 - Activation Of Second SSID AP Lose Connection

Jan 2, 2012

we have a WLC 4404, Software Version and the following Problem. The WLC worked for many years with the SSID "SKHGR". In addition to the existing SSID I have a second SSID "SKHGR-M" is created. The configuration of the two SSID's is identical.
The problem is: when I activate the second SSID, the AP losing connection with the WLC. In the log appears"AP disassociated. ... Base Radio" and "
"not advertising ssid due to radio policy". The AP's connect with the WLC, lose after few seconds the contact.

View 3 Replies View Related

Linksys Wireless Router :: WRT120N - Devices Lose Connection To Internet

Apr 18, 2010

I have a disconnecting problem with my WRT120N (Linksys) wireless router. Sometimes all wireless devices lose the connection to the internet, and the access to the router administration page ( becomes impossible. In this case LEDs of power, internet and wireless are lighting without flashing. This problem usually occurs every 48 hour, and there was no way to make a reconnection except turning the router off by unplugging the power wire and plug it again…
I hope find a solution for this problem here
Other question: are there any problems in Firmware Version: v1.0.04

Note: currently I use Firmware Version: v1.0.01

View 9 Replies View Related

Linksys Cable / DSL :: Devices Continuously Lose Wireless Connection To WAG160N?

Oct 16, 2011

I have a WAG160N with firmware V1.00.16 (version 1 device).The router is connected via ethernet to my main iMac running Lion 10.7.2, although the issue's I'm having have occurred for some time before upgrading to Lion or its's latest update.Firstly, devices I connect to the router wirelessly such as my iPad and iPhone will allow me to use the internet on said devices for about ten minute then the internet will simply stop.   The device is shown as connected (checking the wifi settings on iPad etc show the router is still seen).   If I switch WI-FI off on the device, then back on, internet is restored.   It's not an internet provider issue as I can use the net all day on my ethernet-connected iMac without a problem.My printer is connected to my iMac via USB and shared with other devices.   It is seen on my Macbook which connects wirelessly via the router.   If I try to print from the macbook, the print job will not progress until I re-start the router.   Likewise, there are applications that I sync between my ipad and iMac via iTunes with my mac connected via the USB cable.   The iPad will not bee seen by the iMac unless I re-start the router.   My Apple TV will only sync wirelessly with the iMac if I re-start the router.

View 1 Replies View Related

Linksys Wireless Router :: E3200 Client Lease Time Settings For Printer?

Jul 7, 2011

Can the client lease time be set to never expire to prevent loss of connection for wireless printer with a permanent ip address on E3200? Or is there another way to ensure continuous connection?

View 6 Replies View Related

Tp-link Dual-band Wireless :: Wdr4300 Can't Able To Recognize System /all Wifi Clients Lose Connection

Jan 22, 2013

Region : Others
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 121225 Rel.37950n
ISP : UPC Hungary Ltd.

I can't able to recognize a system - all wifi clients lose connection. When this happens, the ping answer time rech the ~2000 times, then totally lose the connection, the SSID is dissapear - checking with my phone (android - wifi analyzer) and TL-WN822N USB wifi adapter (with the inSSIDer application). Meanwhile the cable clients and the WAN connections works fine, didn't experience anything.If I restart the wifi service with the hardware on/off button, it runs well for some time.This problem appeared when I used the two older official firmware too.

I tried the auto-chanel function width auto channel width, tried to manually set up one of the less interfered channels with both 20MHz and 40MHz channel width, but none of them bring the solution.The intresting thing is, if I change the router with an old D-Link DI-604, the signal is weak, but the wifi connection is stable, with the same TL-WN822N adapter.I tried to guarantee the router, but after two weeks, my reseller said, it looks ok, they - at the TP-Link service - didn't find anything.

View 7 Replies View Related

Internet Connection Seems To Drop Offline Intermittently

Jan 15, 2013

My internet connection seems to drop offline randomely while surfing the net. It basically results in yahoo or google freezing for 20-60 seconds before unfreezing and running flawlessly again. I seen a previous post that requested the individual hit start, run, cmd, and enter tracert google.com.

Windows 7 Professional
Service Pack 1
Intel Core 2 Duo CPU E8400 @ 3.00GHz


View 1 Replies View Related

Browsers Lose Connection To Internet / Despite Still Having A Connection?

May 13, 2012

Every time I boot up my computer, everything will be working fine for about 5 -10 minutes, but after this, all my browsers will lose connection to the Internet. All of them: IE, firefox, chrome, even the steam browser, all of them just lose connection.The weird thing is, my net connection is perfectly fine: I can still play online games, still use online chat services, still open and use programs like utorrent. It's like something is just blocking all my browser connections.When I run a network troubleshooter, it says "your computer appears to be correctly configured, but the device or resource (Microsoft Corporation: Software, Smartphones, Online, Games, Cloud Computing, IT Business Technology, Downloads) is not responding."I googled this and came across some apparent fixes like flushing and re-registering my dns and restarting my modem, niether of which has worked.In addition, this problem is showing up on two totally separate shared networks and has only affected my computer. Other netwworked devices, like friends/families computers and my iPhone (which I am using to type this) work fine.

View 1 Replies View Related

Linksys Cable / DSL :: Retrieving Up-time / DSL Connection Time Information From WAG320N

Jan 17, 2012

Is the WAG320N iPv6 compatable ? ,or could it be with a firmware update ?.Is the X2000 in the same boat in iPv6 terms as th WAG320N ?.Is there a way of retrieving "UPTIME" / "DSL connection time"  information from the WAG320N and also line attenuation stats etc.Wouldn't need the above but poor isp needs keeping an eye on.

View 3 Replies View Related

Lose Connection To Internet

Aug 25, 2012

I have taken on a new client who has the following setup, BT Infinity, Vigorpro 5510, and SBS 2011 server. I was involved with unpacking and seting up the equipment to get client up and running. I have never setup a firewall before, and after contacting Draytek, they guided to get BT infinity, 5510 to talk so that the server was able to get onto the internet. The setup was then left in its default state.All was fine until lately, the client keeps losing internet approx same time most days.My problem is how do i get the 5510 properly configured to talk to BT infinity, and sbs 2011. I always get lost when it come to playing with IP address. Also the client has a fixed IP address supplier by BT, so want to know how to setup the vigorpro with this address. [code]

View 1 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved