D-Link DCS-930L :: Looses Wireless Connectivity After 5 Minutes?
Apr 27, 2011
Newly purchased DSC-930L connected to DIR-625. Firmware is 1.0 for DCS-930L and A1-1.09 for DIR-625.Camera works fine when connected with cable. Wireless enabled, fixed IP address.Unplug cable and camera still works fine for a while: can access the view page and view picture that does change. F5 refreshes page no problems. After a while (about 5 minutes) web page no longer reachable by browser. Reconnect cable and works fine, unplug and repeat the cycle same thing happens.Also tried: unplug ethernet cable, unplug power cable, wait 10 seconds, connect power cable, try to browse to camera - cannot reach camera.
View 13 Replies
ADVERTISEMENT
Dec 2, 2012
I have a DCS-930L wireless webcam. I can view the images on mydlink. Is it possible that mydlink take pictures with my webcam and then every 10 minutes sent to my domain[url].....? Who has experience with this link between mydlink and Internet?
View 11 Replies
View Related
Nov 19, 2012
I have an EA4500 router. It's the latest in a long line of Linksys routers I've owned and I'm pretty familiar with setting one up and making changes. But the EA4500 seems a bit more picky than previous routers. Last night I tried to enable port forwarding for ports 53, 80, and 88 for my xbox. I already had port 3074 forwarded. When I did that and applied the change, I lost all Internet connectivity. I tried cycling the power on the router with no luck. I finally got connected again by going to 192.168.1.1 and disabled those ports. The status page then said I had Internet connectivity but I really didn't at least right away. It took a couple minutes before I was actually able to to connect to the Internet again. What else should I check when it says I don't have internet connectivity?
View 3 Replies
View Related
Jun 5, 2011
I'm trying to configure ACS 5.2 so that should it loose connectivity to Active Directory it chooses the local authentication, however I can't seem to make this work.Within ACS 5.2, Access-Policies, Access Services, Default Device Admin, Identity,
I have a single rule configured for any device that matches tacacs to use the identity source of Active Directory,
If authentication failed: Reject
If user not found: Reject
If process failed: Drop
The ACS can not access Active Directory, when I debug TACACS authentication on any 65k or 2921 device I get "Received Authen status error".
View 2 Replies
View Related
Mar 3, 2011
I recently started having trouble with my VPN clients loosing connection.I can create the conenction, work with it for a while, and then loose connectivity.Timing seems to be dependent on the activity over the connection.More activity, the conenction stops working sooner.
The cleint doesn't disconnect, I just can't access anything from the client.Disconnecting and reconnecting the client fixes the problem, temporarily depending on how much data I'm transferring.This works 90% of the time.The other 10% if I wait 30-45 minutes, and try again.. It works...with the same results...
It was originally isolated to a Win 2003 server that I was using as the client.It is now happening on my Win XP client as well.I'm using the AnyConnect client ver. 2.5.2014 with the VPN service on the UC520.Which I beleive, is similar to the ASA 5500 series VPN device.I am running ver 8.1.0 on the UC 520, and I can't remember if this started after upgrading to the new software.
View 2 Replies
View Related
Mar 29, 2011
I'm using a Verizon DSL router, Mac D-Link Camera Setup Utility (BETA), and Mac OS X 10.6.7. Configuration of camera is as recommended in manual with CAT-5 cable. Green light blinks irregularly in a communicating-with-router manner. The setup utility won't recognize the camera
View 1 Replies
View Related
May 14, 2013
I have a DIR-655 Rev B1, FW 2.01 (I will probably upgrade the FW tonight to the latest.)
I have at least 20 items that connect wirelessly to this router (2 PCs, 2 Laptops, 2 Tivo Box, 3 Game Consoles, 3 Cell Phones, 2 Tablets, 2 TVs, Printer, AP Gateway, and some other projects) It's been a solid connection to everything for the past couple of years.
I bought a new Dell Inspiron 15r SE laptop (uses the Intel Centrion Wireless-N 2230 Wifi Solution.) After anywhere from 2 - 10 mins of browsing/watching a video/downloading files the access out to the internet simply stops.
At this point I'm still connected wirelessly to the router, and if I go to the router address I still have access and can login and see the router settings. I check and there's plenty of time left on the lease (days.) Still not getting internet access. Eventually my Laptop will disconnect and reconnect (or I do it manually.) I've performed hard resets of the router, I've had my laptop Forget the network and then reconnect, etc. Nothing has resolved it.
I thought it may be my laptop, but I've taken it to Starbuck, Work, Neighbors WiFi, etc and I don't have any problems staying connected on their networks.
I've had Dell on the line, we connected hardwired, and there solution was to force forget and reconnect to the router, which worked for the 10min he was on the line with me, but then failed soon after, and back in the same connectivity hell
View 4 Replies
View Related
Mar 1, 2013
Region : UnitedStates
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : AT&T
Every 5 to 7 days my router loses connection with WAN (ISP modem) but connection over LAN is fine. It seems that 1043ND tries to connect to DSL modem from AT&T by username and password (that does not exists) instead of doing Dynamic IP. I understand that AT&T modem is of type of PPPoE but there is not a password or user id and connection must be dynamic. Page 192.168.0.1/logininfo of modem complains that I was trying to login with incorrect user id password. Every time I have to
1- connect the modem directly to my computer so the modem resets.
2- I have to reset 1043ND to factory default, reboot, and connect cables back how they were, Then go to WAN page do a release and renew to get connected to WAN again.
View 2 Replies
View Related
Nov 12, 2012
im loosing connection every few minutes , tried ipconfig /release , ipconfig /renew and im getting this error every time : An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out. After typing ipconfig /all DHCP address is 255.255.255.255 and this IP 192.168.100.10. Tried other things like flushdns / netsh commands and nothing want to work. My connection works only after i restart my modem. Modem type Ubee 3236. The modem is new got it 4 days ago. And also why i cant access the modem configuration page by typing my default gateway in browser ?
View 4 Replies
View Related
Sep 30, 2011
I have copied my computer's time in the router time setup under Time in the "tools" section of the router setup. After a few days of the router being up without a hard restart, it has lost 10 minutes somehow. I went to the logs and cleared them out and then looked at the entry showing that the log was cleared and looked at my computer clock and the time stamp of the log entry, and it was 10 minutes slower than my computer clock that I had originally set it from. I have a clock plugged in by the computer, and my computer always matches the clock that it plugged in, so I know it isn't my computer loosing time. What is going on here? Why does the router loose the correct time after it has been up and not unplugged or rebooted at all? I know that the router will loose the time if you unplug it, but this isn't the case here.
View 5 Replies
View Related
Nov 12, 2012
Im loosing connection every few minutes , tried ipconfig /release , ipconfig /renew and im getting this error every time : An error occurred while renewing interface Local Area Connection : unable to contact your DHCP server. Request has timed out. After typing ipconfig /all DHCP address is 255.255.255.255 and this IP 192.168.100.10. Tried other things like flushdns / netsh commands and nothing want to work. My connection works only after i restart my modem. Modem type Ubee 3236.
View 14 Replies
View Related
May 12, 2011
I had to get a new router from verizon cause the old one died. so i reset the camera and wipe all the dlink software and settings. I then start fresh. i get all the way to choosing wireless and input the password. It states that there is a problem saving your settings. I tells me nothing more. I spent 4 hours on the phone with tech support and i can get it working through wired but I can't put it in my childs room wired. it worked perfectly before the router switch. funny thing is that its the same brand and model router.
View 4 Replies
View Related
Aug 11, 2011
Since the blackout beginning of this week from dlink I had to reset my camera totally to operate it again. works now again with iphone and with mydlink. But it only works as long it is connected via lan cable to my router. I accessed the set up (via ipaddress) and entered the router details to the setup but as soon I disconnect from lan it does not work anymore. What did I oversee.
MAC OS X
Airport extreme
View 1 Replies
View Related
Sep 17, 2012
I'm trying to connect the D-Link 930L Wireless N Camera to my E4200 router. When I have the camera connected via the Ethernet cable it works fine, as soon as I unplug the Ethernet cable it will not connect wirelessly. I tested the camera on a friends router E3000 and the camera connects fine and work flawlessly on his network wirelessly. Any settings in the router that need to changed or set differently?? All of my other devices work great. I have been through D-Links Tech support all things point back to my router.
View 6 Replies
View Related
Feb 18, 2013
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : V4
Firmware Version :
ISP :
i m experiencing wireless disconnects every 5 or 10 minutes and all i have to do is too disconnect from the router in windows from Wireless connections panel , and reconnect and it ggets fixed for some time again . i got so frustrated that i changed to openwrt , the disconnection problem is gone but not getting the 150Mbps.
View 7 Replies
View Related
Mar 21, 2011
I would like to share my live video from my dcs-930L camera but don't want to give out my password that would allow people to change settings..
View 3 Replies
View Related
May 5, 2011
i was playing back the recording,when i skipped ahead, the sound disappeared. I am recording 10 hours worth everyday, most of the time i just need to skip to a certain time to see and hear what was going on,
View 2 Replies
View Related
Feb 12, 2013
How to add an external antenna? I'd like to mount a DCS-930L in a location (inside a metal housing) that would need the antenna to be a few inches away. Any internal layout information?
View 3 Replies
View Related
Aug 31, 2012
I just brought this D-Link DCS-930L. I insert the disc and follow the instruction and select the option of without WPS and follow the step of connecting the lan cable and power point but at Step 2, after the green light, it keep prompting me that it can't find the camera. it connected to the router where there is a lan cable connected to my pc.
View 1 Replies
View Related
May 6, 2011
I downloaded the MAC setup Utility(BETA) and it can't find the camera.The camera is connected via Ethernet-Light on the front under the lens is green (blinks sometimes)First thing I noticed wrong was the setup utility asks if the light on the side of the camera is lit green-there's no light on the side of the camera as far as I can tell. I tried unplugging the camera and hitting the reset button on the back-nothing works.
PC: MAC OSX 10.6.7 (2.2GHz Intel Core 2 Duo/4GB RAM)
Router: Linksys WRT54G Wireless-G Broadband 2.4GHz
Browser: FireFox 4.0.1
View 3 Replies
View Related
Nov 27, 2011
i installed cameras but want to set up for motion. I have 2 dcs 930l cameras and I can see them live i have only 2 settings live video and camera info i also downloaded the link from support.dlink.com i have a new windows 7 laptop and it keeps tryng to download java app problem is now computer keeps asking for a username and password and I have no idea what username and pw it wants as it says in the box it is unsecure
View 1 Replies
View Related
Apr 7, 2011
I just recently purchased the DCS-930L wireless camera, and I am trying to connect it to my Netgear router but it states that there's an error and can't connect. My itouch and laptop connects fine with the router.
View 6 Replies
View Related
Dec 8, 2011
Is it possible to install the D Viewcam software on a PC that is offsite (different network) as the camera and record from there? Basically the camera is home and you record from work.Can I record directly to any NAS (same network as camera) without having a PC in the middle? Or do I need a specific NAS?What about one of those external hard drives that hook up directly to a router?
View 1 Replies
View Related
Jan 22, 2012
I have the DCS-930L set up at home with motion detection emails. I only want it to be sending emails when I am not home, of course, but there's no way to turn off the camera through my dlink.com as far as I can tell (only an option to remove the camera, which I assume is something more drastic). Is my only choice to unplug the camera when I don't want it emailing?
View 6 Replies
View Related
Jun 10, 2012
I am able to access 930L (2 cams) from wifi be it laptop,iphone or ipad but I am not able to see it through 3g.I have Huawei fibre optics broadband reuter from Starhub.Starhub is running away if ask them to fix it. Huawei never takes the call.I tried atleast 3 times 10 minutes each at 8006011450.It goes to disconnect. The lot talked about UPNP is enable in reuter but it does not work.
Now i talked to Dlink support with ticket DCX36811.They advised to load the firmware.I did it still the connection timeout is there. we have baby to monitor through iphone/android 3g.
View 2 Replies
View Related
Jul 5, 2011
I bought and hooked up my DCS-930L camera last week. Have since traveled overseas and go to Mydlink website, log-in and then it tries to install a java applet that never does install. It shows the security box where it asks me to run and then it shows another security box with a message: java.io.FileNotFoundException:C:usersmynameAppDataLocalLowSunJavaDeploymentsecurity rusted.certs(Access is denied)
I click ok and the java applet never loads. It just keeps saying Installing Java Applet.
View 7 Replies
View Related
Mar 10, 2012
I have a DCS-930 running successfully on my home network. Now I want to set up a DCS-932 on a different network at my mother's house in another city, so I can monitor her house from a distance. Questions:
1. After installing, will I be able to see both cameras at mydlink.com if they are on different networks?
2. Is installation any different because there are 2 networks?
3. Can I use the existing install wizard on the laptop that I used with the 1st installation or should I use my mother's PC?
4. How do I get started since the first instruction is to insert and use the CD that came with the new camera?
Basically I want to know what the install procedure is if I am using a different network but the same laptop I used with the 1st one. The laptop has a wireless connection to both networks.
View 3 Replies
View Related
Sep 13, 2011
I think I did everything per the manual, but I cannot access my camera over the internet thru [URL] website. It says that I have to check if I have enough bandwidth, or checked if my camera is not blocked by my router But I have a Dlink DIR 655 router where I have configured the Virtual server (port 80) as it is explain in the manual I also have a DHCP reservation that works fine (I can access the camera within my network) What should I do more now to finally access my camera from internet (this is for me the interest of havinf a network camera!)
View 14 Replies
View Related
Apr 19, 2011
Is there any way to turn off the front green LED on the DCS-930L or do I just cover it with a piece of opaque tape?
View 2 Replies
View Related
Aug 21, 2012
I am using a Mac and would like to view the live feed full screen. Is this possible?
View 3 Replies
View Related
Feb 1, 2011
My DSC-930L's web interface becomes unresponsive about an hour or two after power cycling my camera. It still responds to pings, and it still sends images to FTP when it detects motion, but I can't log into it via web interface, mydlink, or the iphone app. Power cycling the camera fixes the problem for an hour or so but then its right back to not working again.
View 8 Replies
View Related
Sep 2, 2011
The firmware update went smoothly The mydlink service quit accessing the camera, until I download and ran the updated Mac version of the "mydlink Setup Utility v1.0.06_07272011"Seems as if the camera is more stable; ping times are more consistently low.
View 2 Replies
View Related
Apr 1, 2013
Due to problems with the D view cam, I have reset my IP camera DCS-930L but I can't register the password, it says "There was a problem saving your settings. Press next and try again." I can't get pass saving password, tried all the previous passwords but none works.
View 2 Replies
View Related
