D-Link DIR-655 :: Wireless Connection Is Lost When Switching On Desktop Pc?
Jan 31, 2011
I've got a bit of a weird situation here as soon as I switch on my desktop pc my wireless connection is lost. This is only the desktop pc, I aso have a HTPC on wire, this one doesn't have any problems. If my wireless fails, my wired clients can still go on the internet. (see for detail the drawing at the bottom of this post).
The other weird thing is as soon as I set my wireless to WPA-TKIP there are no problems, but my wireless is set to WPA-AES due to the wireless N standard.
I also noticed as soon as my wireless drops out the router starts changing channels.
Part of my network is DHCP (in the range of 192.168.0.100 - 192.168.0.199) the other part has fixed adresses (192.168.0.251, 192.168.0.253, 192.168.0.254)
What i've tried thusfar
- other firmware
- replaced cables
- rebooting/restarting router
- setting up from factory defaults
View 1 Replies
ADVERTISEMENT
Jul 3, 2011
A few days ago my desktop (which is hardlined into a router) lost all connectivity. My wireless connections work fine and i have began basic troubleshooting; changing ethernet cables, taking router out of the mix, etc. Beginning to think the ethernet port on pc is going out (NIC card?). Funny thing is, it will come back intermitantly for 10 minute increments. power cycling does nothing.
View 8 Replies
View Related
Jan 18, 2012
I am using InnoMedia MTA6328-1Be2S from Reliance and D-link DIR-600 for sharing internet connection. I have a strange problem here after using internet for sometime..I will not be able to use internet unless I shut down and restart both Innomedia and D-link.I tried changing configurations in D-link but with no luck. I lost the connection no matter I am using wireless or wired mode.I do not know how to login to InnoMedia MTA6328-1Be2S as well.
View 1 Replies
View Related
Mar 7, 2013
Region : UnitedKingdom
Model : TD-W8968
Hardware Version : V1
Firmware Version : 1.0
ISP :
I recently bought this modem for use at home. When I try to log in to my computer at work I am able to log in to the server via a VPN connection but not onto individual computers via Remote Desktop Connection. Both computers run windows 7.
View 4 Replies
View Related
Jul 21, 2011
Yesterday we had a very brief power outage and until then everything worked fine. Small business that runs modem - router - switch. Since the power outage I can only get internet if I run straight into the modem. As soon as I run from the modem to any (tried 3 different ones) router I lose internet. I get a wireless signal on my router. I've reset the router to default settings. I've plugged in another router to the modem to check and I don't get anything from that router either (which was not plugged in during the power outage).
View 1 Replies
View Related
Dec 14, 2011
I bought a DIR-600 a couple of months ago. Days later started experiencing problems, connection would drop, and only way to restore connection was to reset the router.It has its password configured, a secure wireless connection also configured, and Wan Ping is disabled.Yesterday I called D-Link support, and they asked me to update firmware (from 2.03 to 2.05). I did, but problem still here.Today I realized that there is a log section, and when I entered this is what I found?
View 3 Replies
View Related
Jul 16, 2012
I'm using LMS 4.0, after I auto discovery device, I can see all of devices on my network but I cannot view the links connect between the ASR 9000 and Catalyst 6509. I've just checked cdp neighbor on these devices, I can see the full of neighbors.
I attach 2 file, with the visio topology and the topology view on LMS , and I'm 100% sure about the connections between these devices are used. I try to re-discovery many times but it not work correctly.
View 2 Replies
View Related
Feb 28, 2012
i got a Dir-655 router and Dell 1501 wireless -N mini PCI card (802.11 bgn compliant). Router was set to mix mode but my desktop Dell XP8300 can connect only till G mode.
1) I search on web and some said that i need to set my router to N mode only for my desktop to connect to N mode. IS THIS SOLUTION CORRECT??
2) Another issue was my sis got other old brand latop which can only connect to B mode, if i set to N mode only, she won't be able to connect it right?
View 14 Replies
View Related
Mar 1, 2013
After not seeming to be able to save any configurations in 12.2(25)FX, I thought an upgrade would work since it said it didn't recognize my browser or OS but let me continue. I was able to see everything just couldn't save changes.
I updated to 15.0(1)SE3 and everything seemed to be going well. Tried to log back in HTTP (have not set n IP yet since it is still at my house... DHCP seems to be working) and I get a user/password screen that says level_15_access and it won't let me in.
Attempts to log in terminal have been unsuccessful. I can log in my dell switch which I am replacing and my APC units terminal just fine using USB to serial and Ubuntu.
I tried cisco as a password, user and password, admin, administrator no luck.
What is the best way to resolve this, is there a sure fire windows serial program or settings I should use in linux (currently 9600,8,N,1) to connect? I have looked through manuals till I am blue in the face.
View 5 Replies
View Related
Jan 1, 2013
i have a cisco 1900 series router from the isp and we connect it the our router the rv042 small biz, and we have here a cisco catalyst 2950 switch with just default configuration connected to the hosts.
my problem is from time to time that the connection is lost there is no connection with the router and the only solution is to turn off and on the cisco 1900 router and the connection will be back.
do we need to configure the routers and switches? what do you need to configure?
View 2 Replies
View Related
Apr 4, 2011
I have an Acer Desktop Aspire AM3100 running Windows 7 Ultimate. I upgraded my memory. When I turned the PC back on I had lost my whole home network and cannot get internet acces back. I have checked my modem by direct connecting it to my laptop. I have checked my linksys box by doing the same. I can see the linksys on my laptop but cannot access the internet. On my desktop I get nothing?The home network and internet access all disappeared when I upgraded memory.
View 2 Replies
View Related
Jul 15, 2011
to play Xbox Live and use my computer at the same time and all of a sudden my connection would be lost. I eventually figured out that my laptops Wireless connection being lost was completely to blame on my Wired Xbox connecting to the internet.
View 1 Replies
View Related
Mar 12, 2012
I recently took my laptop (HP Pavilion) running Windows Vista, with me on vacation. I got it to work there but it won't work wirelessly now that I'm home.
View 14 Replies
View Related
Aug 25, 2011
recently I have been using my laptop downstairs where the router is in the same room, and now, when I attempt to connect to the network in my bedroom it connects for maybe a few seconds and indicates an average connection and I can also see other available networks before suddenly all connectivity is lost, I can't even see other available networks. Previously I would be able to get strong signal in my bedroom and I was able to use the internet without any fault.I have tested a family member's laptop in my bedroom, and theirs seems to be working just fine in my room. I can only use my laptop downstairs now and I need to know if this is a fault with my laptop's network adapter or if it's a problem with connection between my laptop and the router.
View 2 Replies
View Related
Apr 3, 2011
My wife and I both have Win XP laptops. For some reason, one day we both lost our wireless connection. However, my wife's machine later was able to reconnect - mine wasn't. My machine sees the wireless network, sends the key, and tries to acquire the ip from the router. That's where it gets stuck. The ip address never gets updated.
View 3 Replies
View Related
Jan 4, 2011
My problem: Shared network drive (folder), when accessed over wireless from more than 1 PC (2 or 3) simultaneously, drops everywhere with a "The specified network name is no longer available" (in Windows Explorer), or "File cannot be read" (in a program). And I don't mean accessing the same file; yes, the files I've tried with are in the same folder, but when the connection is lost a)one client is streaming video from one file and b)another client is copying over some other file to the same folder. It even happens, for example, when one client is transferring a file, and another tries to list the folder. The connection for the file transfer is immediately lost.
My setup: Home network. 4 clients (3 laptops - 2 running XP and one running windows 7, and a desktop, running windows XP). 1 server, running windows server 2003 Enterprise Edition, 2Gb RAM, 2.66 Celeron CPU, and with a 1.3 TB Shared drive partition. The idea is to use the server as a NAS. The desktop and the server are connected via 100MBit UTP/Ethernet, to a DLINK DI-604 Router (WAN port of the router used for Internet). To another one of the LAN ports is connected a Wireless router, NETGEAR WGT624 v3. Wireless connection for the laptops is established at 54 Mbits. The share is mainly used for movies and music sharing between the PCs. When using the shared drive from the desktop (or if I use a LAN cable to plug directly to the DI) I have zero connection problems. For the wireless, however, as I mentioned before, the second I do two twings on two different machines that are connected over wireless simultaneously (and I've tried *all* combinations) the connection is lost for 5 seconds, which is not significant, but enough to be annoying if watching a movie or trying to use the "robust" file transfer of Windows.
What I've tried so far: Perfmon was showing that Page Reads were high, so I upgraded the RAM TO 2Gb(previously the server had only 1Gb or RAM). I tried having each client map the drive using its own account, that did not work either. I've been dealing with shared drives a lot (on win 2000-win 2008 servers), but not nearly as bad of behavior. Worst I've had is having to remap the drives every once in a while if not used or a client gets restarted and loses the mapping. However, I've dealt primarily with sharing over Ethernet, and not WiFi. I'm not a rookie by any means (I've covered CCNA and have done quite a bit of sys admin work as a hobby) I've done all of the basic troubleshooting, the problem is very specific and not a general networking problem by any means.
View 3 Replies
View Related
Dec 9, 2011
I got a new laptop l and it asked for the p number under the router. I gave the number and it changed my unsecured router to a secured one. Not how do I get the password and the security key.
View 1 Replies
View Related
Sep 13, 2012
I have lost my wireless conection on my lap top XpSDell1530.I have installed Ulities, drivers. Ihave 4 G Verzon but it will not down load on my Dell due to know oprerating sys.
View 1 Replies
View Related
Aug 5, 2011
my PS3 has recently lost wireless connection to my network, whenever i try to reconnect i get the following error messages. failed to get ip address, or attempt to obtain ip address timed out.i thought i would try to renew ip addresses but when i try to release ip address , via command line (ipconfig/iprelease) i get the following message. this operation cannot be performed on local area area connection while it has media disconnected.
View 1 Replies
View Related
Jan 19, 2012
At power on and off on my laptop, the wireless internet connection is lost on windows 7.
View 1 Replies
View Related
May 11, 2011
I have a laptop running win xp. It was running fine this morning. I then brought it to a Honda dealer. The problem started there ...At first, I got a strong wi-fi signal but not network connection. I tried to repair (by right clicking on wireless network icon on the lower-right corner). The first time it seemed trying to do something but nothing worked. The 2nd time when I tried to run repair, the process hang and the machine could not be rebooted or shut off. I have to hold the power key for a few seconds to turn it off.Now, I am at home using another computer to post this message, which indicates my home lan and my router are working fine. But my laptop still has no connections - neither wired or wireless
View 4 Replies
View Related
Nov 1, 2012
I'm looking for support on why I'm always loosing my internet conection due to my WRV210 Router.
This is being used in a business, and it has the most up to date Firmware, I'm also using a spliter hub which was making things work better, but now it seems about every second day I have to unplug the router only and my connection is back..
View 1 Replies
View Related
Jan 23, 2013
my compaq presario CQ50 suddenly will not connect to internet.my router is a linksys WRT54G.
View 2 Replies
View Related
Aug 19, 2011
I been using my WRT54G with no problems for 2 years now. I lost wireless. I have 1 pc wired to the router and it works fine, e-mail, accessing the internet, everything. But I have 6 wireless devices ( 2 PCs, a printer, Nintindo 3Ds, a laptop and a nook) that use the wireless part of the router at different times. Anyways, last night, one of the wireless PCs lost connection, not seeing the router. Then I checked with each of the other wireless devices. None of them see the router. I tried many different things: powering down the router for two hours, hitting the reset button for 30 seconds, I even uninstalled the router and re-installed it and ran the setup-wizard. Again the pc I have wired to the router works but none of the wireless devices can see the router.
View 1 Replies
View Related
Feb 24, 2013
I have lost my wireless internet connection it has been working perfectly, I phoned Sky and they say I will have to speak to dell to see where my internet has gone. I have a Studio 1745 Laptop. Is there a manual disable button on my laptop that I may have disabled by mistake.
View 1 Replies
View Related
Dec 3, 2011
How can I get my wireless capablities back to my Inspiron 1545, it just went off all of a sudden and I have reset everything but to no avail.
View 1 Replies
View Related
Jun 9, 2011
I have a wireless router that was named and all the wireless equipment (laptop, ipod, phones) was connecting easily with no problems. Everything is saying "unable to connect". I have no clue what she did but she said her laptop asked her for the 8 number code from the router and she entered it.
View 1 Replies
View Related
Jul 26, 2011
lost connection and can't find icon in system tray or anywhere else to search for wireless routers in range.
View 1 Replies
View Related
Apr 10, 2012
My computer has lost its wireless connection. where can I download the driver?
View 1 Replies
View Related
May 15, 2012
My Gateway NV53 laptop has suddenly lost the ability to connect wirelessly to any network. Ethernet connection works fine. Wireless light is turned on, but laptop does not "see" any wireless networks. It is as if the wireless adapter is no longer there. It does not show up in Device mgr.
View 3 Replies
View Related
Dec 27, 2011
The problem: running a standard single band 2.4gz BT homehub. When using my xbox and wireless headset (razer chimeara) the xbox loses connection. When i tuen the headset off i no longer lose connection. This suggests to me that the headset is simply emitting on the same frequency and bullying the connection, thus the xbox disconnects I have purchased the wireless N adapter to allow the xbox to run on the 2.4 or 5ghz band. I am now looking for a duel band router to allow my xbox to connect to the 5gz band and hopefully this will rectify my interference issue with the headset. I have been lookijg at the e4200 as this supports seperate ssid for 2.4 and 5ghz band, so the xbox can run on the 5ghz and the intererence from the 2.4ghz headset should subside - do you think this would work? Also, with the single ssid duel band routers, where 2.4/5gjz share the same ssid - how would my wireless N devices know to run on the 5ghz and not the 2.4?
View 3 Replies
View Related
Jul 20, 2011
My router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
View 2 Replies
View Related
May 5, 2012
I switch on router and connect my iPad on router linksys cisco e2000. During 10 minutes, There is no problem. After 10 minutes, I have always the connection with my router but no internet. To Avoid this problem, i restart the router with switch and after, no problem. Do you have any ideas to avoid this lost connection after 10 minutes when I switch on my router.
View 2 Replies
View Related
