D-Link DIR-600 :: Connection Lost After Inactivity In Wireless / Wired Mode
Jan 18, 2012
I am using InnoMedia MTA6328-1Be2S from Reliance and D-link DIR-600 for sharing internet connection. I have a strange problem here after using internet for sometime..I will not be able to use internet unless I shut down and restart both Innomedia and D-link.I tried changing configurations in D-link but with no luck. I lost the connection no matter I am using wireless or wired mode.I do not know how to login to InnoMedia MTA6328-1Be2S as well.
View 1 Replies
ADVERTISEMENT
May 11, 2011
I have a laptop running win xp. It was running fine this morning. I then brought it to a Honda dealer. The problem started there ...At first, I got a strong wi-fi signal but not network connection. I tried to repair (by right clicking on wireless network icon on the lower-right corner). The first time it seemed trying to do something but nothing worked. The 2nd time when I tried to run repair, the process hang and the machine could not be rebooted or shut off. I have to hold the power key for a few seconds to turn it off.Now, I am at home using another computer to post this message, which indicates my home lan and my router are working fine. But my laptop still has no connections - neither wired or wireless
View 4 Replies
View Related
Feb 28, 2012
i got a Dir-655 router and Dell 1501 wireless -N mini PCI card (802.11 bgn compliant). Router was set to mix mode but my desktop Dell XP8300 can connect only till G mode.
1) I search on web and some said that i need to set my router to N mode only for my desktop to connect to N mode. IS THIS SOLUTION CORRECT??
2) Another issue was my sis got other old brand latop which can only connect to B mode, if i set to N mode only, she won't be able to connect it right?
View 14 Replies
View Related
Dec 28, 2011
I just connected a WRT190N v2 Wireless Router to my XPS 400. When my wife tried to connect our other desktop to the wireless network, everything seemed fine. I noticed that, when she wasn't actively browsing or using the network, her computer would lose connectivity, but regain it when a browser was opened. When I tried to use the XPS, I found that it had no connection. I regained connectivity after using the Windows Network Diagnostic tool, but neither computer seems to keep connectivity when left alone, at least for very long.
View 1 Replies
View Related
Jan 9, 2012
I have TP Link TL-WR740N , Firmware Version: 3.12.11 Build 110915 Rel.40896n . All working fine , but one problem whan I put my PC to sleep mode , and roter stay working , after when I awake PC it lost connection with router !
View 2 Replies
View Related
Jul 3, 2011
A few days ago my desktop (which is hardlined into a router) lost all connectivity. My wireless connections work fine and i have began basic troubleshooting; changing ethernet cables, taking router out of the mix, etc. Beginning to think the ethernet port on pc is going out (NIC card?). Funny thing is, it will come back intermitantly for 10 minute increments. power cycling does nothing.
View 8 Replies
View Related
Sep 22, 2011
After a brand new Router/Modem combo., there is NO local/wired connection with XP, although other PCs has a good connection with strong signal.
Is it because a spectific folder needed for wired/local connection got lost, .... or Networking card inside got defective?
View 3 Replies
View Related
Jan 31, 2011
I've got a bit of a weird situation here as soon as I switch on my desktop pc my wireless connection is lost. This is only the desktop pc, I aso have a HTPC on wire, this one doesn't have any problems. If my wireless fails, my wired clients can still go on the internet. (see for detail the drawing at the bottom of this post).
The other weird thing is as soon as I set my wireless to WPA-TKIP there are no problems, but my wireless is set to WPA-AES due to the wireless N standard.
I also noticed as soon as my wireless drops out the router starts changing channels.
Part of my network is DHCP (in the range of 192.168.0.100 - 192.168.0.199) the other part has fixed adresses (192.168.0.251, 192.168.0.253, 192.168.0.254)
What i've tried thusfar
- other firmware
- replaced cables
- rebooting/restarting router
- setting up from factory defaults
View 1 Replies
View Related
Aug 17, 2012
Lost my internet connection to my Dell XPS 435t/9000 running Win7 (64) yesterday. Unable to restore. No know configuration changes other than the regular weekly window update. My service provider is Verizon FIOS and all there stuff checks out. My iMAC and Dell Laptop connect fine through the same devices (router/modem/switch).
The xps shows no hardware faults and all the wired connections are intact. Unable to ping router. Network Sharing interface shows good connections to switch and router by a bad connection between router and internet.
Ran WIN7 network troubleshooter and it just told me to contact ISP.Rebooted machine several times but no joy.
View 5 Replies
View Related
Mar 28, 2012
default inactivity connection time out for A3(1.0) So by defult any tcp connection(http or https) will be timed out in an hour. [code]Was this change in the A4(2.0) code or is it still the same? I heard a TAC engg say that default inactivity timeout for http and https are now 5 mins that is 300 seconds.
View 3 Replies
View Related
Feb 17, 2012
I have two separate wired networks. Network 1 has a wireless router (an adsl modem). Router of the Network 2 is not wireless. Can I replace router of network 2 with DIR-600 to make a wireless connection between these two network segments ?
View 5 Replies
View Related
Aug 19, 2012
I originally installed my DIR-655 as a wireless access point, not using the wired ports at all, and it worked fine like this. Trouble with my trying to set up my Bell router/modem with port forwarding prompted me to change my configuration so my Bell router /modem is now only a modem, and I am using the DIR-655 as a wired as well as wireless router. I have a separate network server and so don't use the DHCP on the DIR-655, and I only use one port to connect to a separate gigabit switch that serves the network.
I am finding that the wireless connection works really well with the few wireless devices I have connected (mainly an apple tv, and a MAC book) but my wired connections to the internet "feel" slow, sometimes with a significant delay before links to sites are established. I click a link, and wait for several seconds before the site shows up in the browser; sometimes after that the same site seems to respond at normal speeds, other times there are added delays.
Is there something in the DIR-655 settings that would cause this? The wireless connections seem fine.
Should I be looking at a new router/modem (rather than separate boxes)? If so what would be the equivalent D-Link model?
View 5 Replies
View Related
Jan 20, 2013
Region : UnitedKingdom
Model : TL-MR3220
Hardware Version : V1
Firmware Version : 1.13.1 Build 121123 Rel.56770n
ISP : 3 UK
My Huawei E3231 dongle gives me a strong signal and stable connection and rarely loses connecton when plugged directly into my laptop. In the router, connection duration only lasts, fairly consistently, about 30 minutes. 3 UK base station is in sight and only about 90metres away. I have to power off/on the router and turn off/on the wireless button on the laptop to restore connection. i've tried setting idle times etc and other things in the router settings but no joy. The OS is W7 Home Premium SP1.
View 2 Replies
View Related
Nov 25, 2011
My D-Link DIR-300 very often loses connection on wired and wireless connections. It stops connecting to Internet randomly i.e. any URL typed in from the browser times out.I connect various devices such as desktop, laptop, ipad2 over wired and wireless connections and the behavior is the same from all devices when this problem occurs. If I make a direct connection to the DLS modem, it works fine for the whole day, without these issues.I also observed IP address conflict messages and my desktop does not connect to Internet if I am running VPN on my laptop, at the same time, occasionally.When this occurs, I am able to login to the router and can see the WAN status and the DHCP address being allocated to the router. I can even do DHCP release and renew, but that does not fix the problem.
View 3 Replies
View Related
Apr 21, 2013
I have a brand new DAP-1522 A1 connected to an 802.11n wireless LAN in bridge mode. Running in the 2.4GHz band with WPK-2 and AES security/encryption.Everything runs fine 99% of the time, but once a day or so the wireless LAN connection on the DAP-1522 drops and then takes about two minutes to re-connect. It re-connects and then everything is fine for a day or so until the next dropped wireless connection episode on the DAP-1522. I know my 802.11n wireless network is 100% fine as during the dropped connection to the DAP-1522 I can connect directly to the 802.11n wireless network (running from my gateway/router) using my other computer, no issues.I've seen some posts on this forum that the A1 version of the DAP-1522 hardware is not 100% compatible with the 802.11n network standard and there will be intermittent wireless drops. If this is true, it's just insane. All I can say is I can't believe DLink would allow a product to be sold that won't work properly on 802.11n networks.I check the logs each time I see the dropped wireless connection and all that shows is the following.1) Negotiating connection 2) 4-way handshake success [mac address]There's no message in the logs about why the wireless connection dropped, but I assume it has something to do with re-newing a key for the wireless network as the successful key renewal messages are the only other messages in the log. When the wireless network dropped I don't see the successful key renewal message at the time I should see it.I thought this DAP-1522 would take 15 minutes to configure in bridge mode and then I'd forget about it. Spend too much time on this already, so a bit disappointed with this DAP-1522 and DLink tech support....though when it's connected to the 802.11n wireless LAN it works fine.
View 14 Replies
View Related
Jul 21, 2011
Yesterday we had a very brief power outage and until then everything worked fine. Small business that runs modem - router - switch. Since the power outage I can only get internet if I run straight into the modem. As soon as I run from the modem to any (tried 3 different ones) router I lose internet. I get a wireless signal on my router. I've reset the router to default settings. I've plugged in another router to the modem to check and I don't get anything from that router either (which was not plugged in during the power outage).
View 1 Replies
View Related
Sep 7, 2012
I have internet thru Century Link (DSL). I also have a Netgear N-300 wireless router. My computer is 4 years old and is an HP with a G wireless adapter buit-in. Until yesterday, my provided internet speed was up to 7mbps. I received the same speed regardless of whether my computer was plugged in directly to the modem (1), plugged directly into the router (2), or wirelessly. We just upgraded our internet to 40mbps. Now, I get the 40 mbps when my computer is plugged into the modem or router, but wirelessly I only get about 4 mbps, 1/10th of what I get with wired.
View 3 Replies
View Related
Aug 9, 2012
the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.
View 3 Replies
View Related
Dec 14, 2011
I bought a DIR-600 a couple of months ago. Days later started experiencing problems, connection would drop, and only way to restore connection was to reset the router.It has its password configured, a secure wireless connection also configured, and Wan Ping is disabled.Yesterday I called D-Link support, and they asked me to update firmware (from 2.03 to 2.05). I did, but problem still here.Today I realized that there is a log section, and when I entered this is what I found?
View 3 Replies
View Related
Feb 16, 2011
I setup a D-Link DIR-825, VB1, Firmware V2.00NA about a month ago. We have 3 Macs here at home - 1 brand new iMac, a G4 Powerbook, and an old G4 / 933 Tower. The G4 tower is connected via ethernet. The other two through Wi-Fi. My problem is that I can barely use the internet for even a few minutes on the G4 tower, connected via Ethernet, without losing my connection. I can be in the middle of loading a page or an image, and suddenly it will say "Waiting for xxx.com". Then if I try to go to Google.com or something I will invariably get "Looking up xxx.com". The connection usually returns on it's own, but it can take up to 3 or 5 minutes. When I get this message on the ethernet G4 tower, I will also have lost connection on the wireless Macs. For the first couple of weeks the tower was not connected and we were just using the two wireless Macs, and they were working well. It seems that as soon as I hooked up the G4 tower via ethernet, connections became very flaky and intermittent all of a sudden.All the Macs are configured for DHCP. We have a Time Warner cable modem. The G4 tower had previously been used at my office with it's own dedicated DSL modem / router, and it worked flawlessly for months at a time without dropping a connection. I've tried rebooting the modem, then the router, then turning all the Macs back on, several times. Same result. I just tried loading the new firmware but it didn't work. Said the Gateway was too crowded or something.
View 1 Replies
View Related
Jul 16, 2012
I'm using LMS 4.0, after I auto discovery device, I can see all of devices on my network but I cannot view the links connect between the ASR 9000 and Catalyst 6509. I've just checked cdp neighbor on these devices, I can see the full of neighbors.
I attach 2 file, with the visio topology and the topology view on LMS , and I'm 100% sure about the connections between these devices are used. I try to re-discovery many times but it not work correctly.
View 2 Replies
View Related
Dec 6, 2012
Region : Argentina
Model : TL-WR740N
Hardware Version : V1
Firmware Version :
ISP :
Region : UnitedKingdom
Model : TL-WR740N
Hardware Version : V1
Firmware Version :
ISP :
Am trying to use a TP-Link TL-WR702N to connect my Samsung SmartTV to a wireless network, using "client mode".For some reason, the TV refuses to accept it is connected, or even connected to a router. Enabling DHCP on the TP-Link does seem to convince the TV that it is connected to a router, but still not to the internet. Strangely though, I can control the TV via the Android app operating on the local network, so clearly it is connected. I assume the SmartTV is trying to get a response on the local network that the TP-Link is filtering out for some reason, but no idea why.
View 14 Replies
View Related
Apr 1, 2010
I have a new Linksys E3000, 2 wired disktops (1 windows 7, 1 windows vista), 2 wireless laptops (both windows Vista), whenever the computers power down into sleep mode and are woke up, I have lost my connections to the router and I am forced to restart the computer. I've been told by one person that this is a problem with vista and windows 7, but wouldn't that have been a problem with my old router also?
View 9 Replies
View Related
Mar 27, 2013
Region : Belgium
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Telenet
I've just bought a TP-Link TL_WR1043ND and when I was configuring the wireless settings first I had a +- 40Mbps connection,a little later the connection dropped to 4Mbps and was constantly dropping the speed.Sometimes it went to 15Mbps and then it drops back to 4Mbps.Right now its only 1Mbps.
Configuration:
Wireless channel: 11
Mode: 11bgn mixed
Channel width: Auto
Max tx rate: 300Mbps
Wireless router radio and SSID broadcasting enabled
[code].....
View 1 Replies
View Related
Sep 19, 2009
I have just upgraded my network to the 802.11n standard, or at least am trying to do that. Im using a DIR-615 as Access Point and a DAP-1522 as bridge to cover the entire area.After having some trouble figuring out how to set up and connect the devices, i figure out that it might some other problem than my setup of the devices (The symptom was that the connection was ok, but then it seemed to be dropped, even though the DAP-1522 still displayed connected in the status page).
After reading what I could find about the DIR-615 and DAP-1522 in this forum and on the internet, I found a suggestion about changing the Wireless Mode from 802.11b/g/n to 802.11b/g, and after doing that everything works fine, its just not an upgrade anymore.I have fixed the channel to 10, just to check that it wasnt noise from other equipment. The symptoms are very reproducable, trying to connect wiin n-mode and bridge only works for 30-60 secs. Switching back to b/G mode and all is fine.
View 14 Replies
View Related
Apr 25, 2012
I currently have a DAP1522 in Bridge mode with a DIR655. I am only using the 2.4GHz G mode on my 655. In a few days I will be replacing the 655 with an 825. When I log into the 1522 I don't see any settings for Mode, Frequency or Width (while in Bridge mode). The page for wireless setup is blank except for the "Save Settings" button. When I look at the 655, it appears that the 1522 is connected (bridged) at 2.4 GHz G like I would expect. So, when I install the 825 how do I make it connect at 5GHz N or will that be automatic if my SSID on the N mode of the 825 matches SSID on the 1522?
View 1 Replies
View Related
Jun 4, 2011
how to tweak my laptop so that the wireless access does not get disabled after a short period (approx 15 min) of inactivity. It's really annoying to have to reconnect every time this happens.
Using an Atheros AR9285 wireless card in an Asustek N61Jv laptop.
View 2 Replies
View Related
Mar 21, 2012
Recently replace my DIR-615 (it died after about 3 years of steady use) with the 825.Followed CD setup wizard, adjusted some manual thing as well. Am experiencing slow streaming speeds on various websites. A lot of 'loading' pauses within a youtube video for example when I never used to have any stutter at all on my old router.On a cable internet connection with a standard cable modem (no router in it).DIR-825 FW: 2.06NA HW: B1.Wired connection to router, not trying to steam over wireless.Speed tested at 14Mbps down which is what my provider (cogeco cable) promises.
View 1 Replies
View Related
Apr 12, 2011
I should start by saying I am no novice when it comes to networks but this router has been nothing but a issue since day one.
*The Setup - 2 wired PCS, 2 Wired Macs, 1 Wireless Iphone, 1 Wireless Ipad.
WPA2 Only / AES key, Channel 6, G/N only, Hidden SSID.
*The Problem - 95% of the time the wireless and wired is running fine. However, Sometimes randomly webpages on the computer will stop loading... but heres the kicker... other internet connected programs like Ventrilo, or torrents, or games will still be working and running from the net like there is no problem. When this happens the internet browsers on the macs and PCs will say page cannot be displayed instantly. Happens to all computers at the same time. After about 10min the webpages will load again. I have 16mbs internet and while this is happening my games and voice chat programs do not go up in ping at all.
I have turned off QoS since that made the most sence... but other then that I have no been able to figure it out. I even turned off wireless while it was happening and it still didnt fix it. A sure fire way to fix it is to restart the router.
I am 100% stumped. Do I just have a bad out of the box router? it is only 2 weeks old.
View 14 Replies
View Related
Oct 4, 2011
I have problem connecting Samsung (series6) TV to DIR-600. TV wired connection does not work with DLINK DIR-600 150. Is there a work around ?
Config :
DIR 600 is working in access point mode
Check list : Cat-6 Patch Cord - works (brand new works fine with laptop)TV network port - works (works fine with aztech ADSL/Switch)
View 14 Replies
View Related
Apr 3, 2012
Why there is low speed using D-Link in compare with LAN wired connection?
View 9 Replies
View Related
Jan 15, 2013
Region : Hongkong
Model : TL-MR3020
Hardware Version : Not Clear
Firmware Version :
ISP :
I have installed a mini router type MR3020.I have set it up to WISP mode in order to get wifi signal from my main router and be able to deliver wifi to other devices The main router is working fine and I can access internet with no problem.However, the mini router, which detects the main router, is unable to supply internet connectivity. The ip addresses in teh WAN part under network is zero. Though I tried many times to renew the ip address I was not able to get a valid IP address.
View 2 Replies
View Related
Jan 20, 2012
I bought a new DIR-655 REVB router, I already own the first version of the DIR-655 and worked fine, but the wireless range wasn't always the highest upstairs in my house and I was hoping with REVB they had improved the DIR-655's range. I'm not a big wireless guy, meaning if I can use a hardwire connection I will use it, so my house is pretty well wired, but for my daughter and son's ipod and Zune the wireless connection was weak in their upstairs bedrooms. It has been a disaster, the wired connections gets disconnected constantly, I say in the subject title 100's of times a day and I don't think I am exaggerating. It started with Netflix and I thought my son was crazy, how could new router do this, but it was doing it everywhere. It is hard to download files because I lose my connection. I have DSL through Windstream. My solution is to reinstall my old DIR-655.
View 8 Replies
View Related
