D-Link DIR-300 Very Often Loses Connection On Wired And Wireless Connections
Nov 25, 2011
My D-Link DIR-300 very often loses connection on wired and wireless connections. It stops connecting to Internet randomly i.e. any URL typed in from the browser times out.I connect various devices such as desktop, laptop, ipad2 over wired and wireless connections and the behavior is the same from all devices when this problem occurs. If I make a direct connection to the DLS modem, it works fine for the whole day, without these issues.I also observed IP address conflict messages and my desktop does not connect to Internet if I am running VPN on my laptop, at the same time, occasionally.When this occurs, I am able to login to the router and can see the WAN status and the DHCP address being allocated to the router. I can even do DHCP release and renew, but that does not fix the problem.
View 3 Replies
ADVERTISEMENT
May 6, 2013
Region : Others
Model : TL-WR1042ND
Hardware Version : V1
Firmware Version : TL-WR1042ND_V1_130117
ISP : Optic konvertor DHCP mod
I bought TL-WR1042ND and I have problem. After 2 hours, the router loses all connections. Lights that everything is OK, but he can not connect to any site on the Internet or LAN. Even nor to 192.168.0.1 Only search for the host.
I have a DHCP internet. DNS 8.8.8.8 I disabled firewall and all I do not need, but nothing worked.
View 3 Replies
View Related
Dec 27, 2012
Region : Canada
Model : TL-WR700N
Hardware Version : V1
Firmware Version : latest
ISP : Cogeco
I have a WR700N set up in bridge mode so as to provide a wifi signal in far end of our home. I used Bridge so we can tell which router we are connecting to. So we have two SSIDs (MySSID1 and MySSID2) Both with secure log-in. This works fine for about a day, and then disconnects. I then have to mess with the WR700N by plugging it in and out, maybe logging into it and changing something. Then it will work again - for a day
I updated the firmware with no change. Main router is a Dlink 615 with IP of 192.168.0.1. connected to cable modem. TP-LINK is set at default of 192.168.0.254 and gets a wireless signal from dlink.In an attempt to improve situation, I now have both units set to channel 11 and with fixed 20Mhz channel width. b/g/n on TP and g/n on dlink.
View 6 Replies
View Related
Feb 8, 2013
After 5 years of services my DIR-655 begun acting up yesterday; first of it begun by getting REALLY slow, it could take up to 25 seconds to login into the software and up to 30+ seconds just going from one menu to another, on some instances connection (wired) to the router was lost. This morning it started dropping all connections, wired or not; first my iphone then my WDTV, after that it's been pretty much random connections. On one given moment wired works but not wireless, then wireless works but not wired and sometimes I get both but for 3 or 4 minutes.I've reset the router to factory settings, plugged/unplugged, changed cables, network adapters on desktops and the problem persists.
DIR-655 A2
FW: 1.35
Connection: ADSL
View 2 Replies
View Related
Dec 10, 2012
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : Comcast
The 5 ghz connects fine for multiple machines however machines on 2.4 simultaneously lose their connection to the internet, sometimes saying it is still connected to the internet when it is not and sometimes losing connection with the router entirely. The 5ghz still works when this happens.
View 14 Replies
View Related
Apr 23, 2013
Region : UnitedStates
Model : TL-WR940N
Hardware Version : V1
Firmware Version : TL-WR940N_v1_120201
ISP :
Just bought a TL-WR940N and it was always loosing connection and freezing / locking up. I upgraded to the latest FW from the link below URL but it still freezes and loses connection to devices after 8-12 hours, keeps hanging up and pages sometime don't load.
View 14 Replies
View Related
Mar 31, 2013
Region : Argentina
Model : TL-WR741ND
Hardware Version : V4
Firmware Version : 3.16.4 Build 130205 Rel.63090n
ISP : Fibertel
My TL-WR741ND is about 1 year and a half old, it was working fine until about 2 weeks ago. I need to reset it, times between resets is not consistent, meaning, it can take 30 minutes, or 8 hours, but it needs to be reset. Right now, there are 2 wired connections (PS3 and Desktop PC) and 7 wireless (4 cell phones, 2 notebooks and 1 netbook). 1 of the notebooks has static IP, and it also has a VM running, with another static IP. Also some port forwarding simply stopped working (ports 80 and 1180), the rest of the ports work flawlessly, but trying to forward the port 80 and 1180 (to the 2 static ips) won't work. I already upgraded the firmware, and the problem persists, also changed the channel (from 6 to 1, and then from 1 to 11).
Installing dd-wrt/openwrt/gargoyle or anything like that, is not an option. The only reason why I bough t this router, was because I could use dd-wrt, I installed it 1 year and a half ago, and it simply sucked, the wireless bandwidth was non existent, and it was a headache. I installed it again last week, to see if it could be a solution, and I was not even able to save changes in the control panel. I need a real solution, and installing a firmware that works only on chrome is not an option (specially when I use Firefox, and I needed to install chromium just to erase dd-wrt)
View 2 Replies
View Related
Jun 29, 2011
I have a fibre optic internet connection, the modem being connected to the TP Link wireless router. The set up works fine most of the time, but at times all the computers connected lose internet connection. The ISP says everything is fine from their end, and locally we are all connected to the wireless router just fine when this happens. I usually just unplug the modem and the wireless router from their power, in order to reset everything, and this seems to solve it.
View 4 Replies
View Related
Jul 30, 2010
I have a dir-825 connected to Cable modem and a dap-1360 connected I have both wireless and wired clients.If get a ip address conflict and the the dir-825 connection fails from the cable modem and nothing seams to restore that connection, i reboot both route and modem and make sure no client are on. The only way i can figure out how to restore the router is to reset and reinstall from factory state.I can recreate this on 2 different router "825" with factory and updated firmware.I have removed the wireless extender form the picture and this issue has stopped, it might be the extender of a client off the extender. But everything uses DHCP so I'm not sure why ip address conflicts could cause this issue.
View 2 Replies
View Related
Apr 17, 2011
It took a while but I've had my 1522 running well for several days. However, if I power down and then power up the 1522, it never reconnects. The bridge mode light flashes 5 times, then - nothing.
So, I have to disconnect everything, bring the 1522 back to my main PC, attach it, let it connect properly, then unattach and re-attach at it's use site.
(I'm using a static IP address and a Cisco E3000 router working perfectly with all my other stuff. Firmware v1.31)
View 1 Replies
View Related
Feb 7, 2013
I have an old laptop in another room running WMC with windows 7. This is wired to my new DIR 655 router then via a switch to another room to my xbox 360. I have successfully connected the xbox as an extender but after a few minutes of idle time, the connection drops and my xbox automatically restarts. If I'm streaming something it seems to work fine.
[Code]...
View 14 Replies
View Related
Jun 20, 2011
I have a DIR-655 with both wired and wireless connections. Yesterday, network stopped working on one wired machine while using it to surf the internet and a 2nd wired machine has not worked in 3 weeks after moving it from one room to another. Wireless connections are working fine.
-2 wired systems (Windows 7 and Windows XP), both stopped working
-2 wired Xboxes - working fine
-2 laptops, wireless working fine
-1 smart phone, wireless working fine
I've power cycled my DSL modem and DIR-655 multiple times.Power cycled computer multiple times. Tried Win7 built-in diagnostics.Tried setting up static IPs.Tried filling in preferred DHCP server address.Disabled Windows firewall. [code]
View 4 Replies
View Related
Nov 11, 2012
I've been trying to find a response or a fix to this issue for a few weeks now.My DIR-655 RevB router is currently at firmware 2.07NA, and has speeds of around 30Mbps down and 10Mbps up when connected directly through wired connections.However over wifi, I am only getting around about 5 Mbps down and 2 Mbps up. I've tried the 'usual' fixes suggested on here, change broadcast signal to manual, not auto, shutting of QoS shaping, all of that. However nothing seems to be improving the speed.
View 8 Replies
View Related
Feb 17, 2012
I have two separate wired networks. Network 1 has a wireless router (an adsl modem). Router of the Network 2 is not wireless. Can I replace router of network 2 with DIR-600 to make a wireless connection between these two network segments ?
View 5 Replies
View Related
Aug 19, 2012
I originally installed my DIR-655 as a wireless access point, not using the wired ports at all, and it worked fine like this. Trouble with my trying to set up my Bell router/modem with port forwarding prompted me to change my configuration so my Bell router /modem is now only a modem, and I am using the DIR-655 as a wired as well as wireless router. I have a separate network server and so don't use the DHCP on the DIR-655, and I only use one port to connect to a separate gigabit switch that serves the network.
I am finding that the wireless connection works really well with the few wireless devices I have connected (mainly an apple tv, and a MAC book) but my wired connections to the internet "feel" slow, sometimes with a significant delay before links to sites are established. I click a link, and wait for several seconds before the site shows up in the browser; sometimes after that the same site seems to respond at normal speeds, other times there are added delays.
Is there something in the DIR-655 settings that would cause this? The wireless connections seem fine.
Should I be looking at a new router/modem (rather than separate boxes)? If so what would be the equivalent D-Link model?
View 5 Replies
View Related
Sep 7, 2012
I have internet thru Century Link (DSL). I also have a Netgear N-300 wireless router. My computer is 4 years old and is an HP with a G wireless adapter buit-in. Until yesterday, my provided internet speed was up to 7mbps. I received the same speed regardless of whether my computer was plugged in directly to the modem (1), plugged directly into the router (2), or wirelessly. We just upgraded our internet to 40mbps. Now, I get the 40 mbps when my computer is plugged into the modem or router, but wirelessly I only get about 4 mbps, 1/10th of what I get with wired.
View 3 Replies
View Related
Aug 9, 2012
the Xbox part was a windows thing. The router, modem, computer, and monitor, are all on one powerbar. I have used the used-to-be-wired computer (I needed the ethernet cord for something else, haven't gotten around to plugging it back in.) and the wireless laptop loses connection periodically. ALWAYS lose connection on bootup. and also when doing power consuming things. SO, I believe it is a lack of power being sent to the router. wired connections would use less, thats why they are still active, but I assume the wireless transmitter needs more energy in order to function properly. I haven't used the old computer in a awhile now, but I assume if I plug the router into another outlet/curcuit I the problem wouldnt occur. Might need someone wiht more knowledge to confirm this, but I'm fairly certain this was the cause.
View 3 Replies
View Related
Jan 18, 2012
I am using InnoMedia MTA6328-1Be2S from Reliance and D-link DIR-600 for sharing internet connection. I have a strange problem here after using internet for sometime..I will not be able to use internet unless I shut down and restart both Innomedia and D-link.I tried changing configurations in D-link but with no luck. I lost the connection no matter I am using wireless or wired mode.I do not know how to login to InnoMedia MTA6328-1Be2S as well.
View 1 Replies
View Related
Sep 23, 2012
I purchased and set-up the EA4500 on Thursday. Friday my ISP (Charter) was out and worked on connection for over 2 hours due to slowness issues. Connected directly to modem I get normal ping times on whichever computer is connected. When I get the computer connected by the router (hard wired) I get very long ping responses up to 900ms. They are all over the place 30ms (I can live with that), up to the 900's. I contacted Linksys support last night, who had me update to the cloud firmware and change MT U to 1300, have not noticed a difference. I did end up doing a hard reset on the router last night after I lost tech support. We were disconnected with router rebooted, and I didn't have the patience to connect again last night.
It was so slow on my work computer, a pint to yahoo timed out. The computers connecting to router are
XP SP3 (mine)
Win 7 Home (IPV6 turned off)
Work laptop that uses VPN and VOIP
View 5 Replies
View Related
Sep 19, 2011
I have an e2000 wireless router and have several devices connected by ethernet cable including private data on an external hard drive. I am planning to allow a tenant in another building connect via an ethernet cable connected to my router. Can I limit that computer (tenant's computer) from accessing all other devices connected by ethernet cable to my router? I know can password protect wireless access and limit access to the internet that way -- but my question is specifically to connections by ethernet cable.
View 1 Replies
View Related
Oct 11, 2012
My E4200 router no longer accepts any WIRED connections. I can connect from the modem to the computer and everything works as expected. I can connect other computers wirelessly to the router. I cannot connect any laptops WIRED to the router. Nothing has changed on the systems to restrict internet access. There is something wrong with the router and the WIRED ports. I tried going through the troubleshooting on this site but it was of little to no assistance. The Cisco Connect utility doesn't appear to accomplish anything either. My guess is because I cannot connect to the WIRED ports on the router to connect to the internet to allow for whatever troubleshooting that needs to be done.
View 2 Replies
View Related
Feb 16, 2011
I setup a D-Link DIR-825, VB1, Firmware V2.00NA about a month ago. We have 3 Macs here at home - 1 brand new iMac, a G4 Powerbook, and an old G4 / 933 Tower. The G4 tower is connected via ethernet. The other two through Wi-Fi. My problem is that I can barely use the internet for even a few minutes on the G4 tower, connected via Ethernet, without losing my connection. I can be in the middle of loading a page or an image, and suddenly it will say "Waiting for xxx.com". Then if I try to go to Google.com or something I will invariably get "Looking up xxx.com". The connection usually returns on it's own, but it can take up to 3 or 5 minutes. When I get this message on the ethernet G4 tower, I will also have lost connection on the wireless Macs. For the first couple of weeks the tower was not connected and we were just using the two wireless Macs, and they were working well. It seems that as soon as I hooked up the G4 tower via ethernet, connections became very flaky and intermittent all of a sudden.All the Macs are configured for DHCP. We have a Time Warner cable modem. The G4 tower had previously been used at my office with it's own dedicated DSL modem / router, and it worked flawlessly for months at a time without dropping a connection. I've tried rebooting the modem, then the router, then turning all the Macs back on, several times. Same result. I just tried loading the new firmware but it didn't work. Said the Gateway was too crowded or something.
View 1 Replies
View Related
Mar 27, 2013
Region : Belgium
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : 3.13.12 Build 120405 Rel.33996n
ISP : Telenet
I've just bought a TP-Link TL_WR1043ND and when I was configuring the wireless settings first I had a +- 40Mbps connection,a little later the connection dropped to 4Mbps and was constantly dropping the speed.Sometimes it went to 15Mbps and then it drops back to 4Mbps.Right now its only 1Mbps.
Configuration:
Wireless channel: 11
Mode: 11bgn mixed
Channel width: Auto
Max tx rate: 300Mbps
Wireless router radio and SSID broadcasting enabled
[code].....
View 1 Replies
View Related
Mar 3, 2011
I just bought a linksys AE1000 usb wireless adapter for my desk top computer because there are no phone lines in the room with the computer for me to connect the dsl modem. In the room with the dsl modem there is the Linksys E3000 wirless router. My desktop will randomly lose connection with the router yet other devices that use wifi in the house work fine (ex: ipod touch, android phone, and xbox 360.) i have went through and reset all devices and gave the desk top priority in the network but it hasnt worked. The desktop uses XP.
View 19 Replies
View Related
Dec 2, 2011
I just got my first wi-fi printer, a V715w. Even though the Wi-Fi light on the front of the printer is green, I very often can't print to the printer. I get a box saying the printer can't communicate with the computer. I would have thought that the green light was signifying that Wi-Fi communications existed. Wrong? Then what does the green light signify? When I check the settings on the printer front panel, it shows the all the correct info, SSID, etc.. Do I need to do something each time before I try to print in order to ensure a wireless connection exists? Shouldn't the printer stay connected to the Netgear dual band wireless N router all the time? The computer, Win XP, sp3 stays connected to the router all the time. I expected the printer to do the same.
View 12 Replies
View Related
Dec 14, 2012
I going to put have of the PCs on the wired and few want to do wireless. The company want the printers and scanners on the wireless. So how will the wired PCs find the wireless printer and scanner.
View 1 Replies
View Related
Jan 18, 2012
I have a Samsung SCX-4623FW All-in-One Printer that will not maintain a connection to my wireless router a Linksys WRT160N. Samsung technicians have not been able to assist after multiple calls. They sent me to a printer repair store which reported they had no problem with the printer working on their wireless network. When I used the setup disk initially it would connect the printer to the network and I could print from my laptop wirelessly, but the connection never continued working more than a few hoursThe router has no problems in connecting to 3 different computers.
View 1 Replies
View Related
Aug 2, 2012
When ever my roommates and I turn on or turn off a computer or device to log onto our wireless network that computer or device and all other computers or devices that are on the network lose internet connection for about 3 minutes. After that period then all devices gain access back. We have a Cisco Linksys router, Model number WRT110, it is the Range Plus version. I got it 6 months ago from a friend that had never pulled it out of the box or used it. I used it before moving and it did not have this problem. We are using cable for our internet and have a Motorola Surfboard model number SB5101U for our Modem. We have 2 Dell computers, both about a year old, and a LG blue ray device that connects wirelessly to stream movies
View 4 Replies
View Related
Jan 4, 2013
My Inspiron N5110 loses the wireless connection frequently. We have many other devices in the house -- laptops, iPhones, etc. -- that continue to work flawlessly through the same router when I lose my connection. The troubleshooter generally leads me to resetting the router, even though, as I have indicated, the router is working properly.
View 5 Replies
View Related
Jan 1, 2011
I have a new inspiron 1564 laptop that loses connection to my wireless internet within 10 minutes of booting up. Then if I reboot it does not connect at all, can't even find the wireless router.
My works laptop and iPhone connect to the same router perfectly.I've seen the following post a few times from pudgyone and tried following it :Go to device manager(right click my computer, left click properties, left click hardware, left click device manager). Click on Network and then right click on your wireless adapter, left click properties, power management. Uncheck the box, allow computer to turn off this device to save power.
In terms of the device manager I can't see a network option, there is network adapters and I've right clicked on Realtek PCIe FE family controller and unticked the box but this hasn't worked.
And with the settings, how do I get to the screen where I can change my router settings in windows 7? I think the firmware is updated remotely by my service provider sky.
View 15 Replies
View Related
Feb 6, 2012
I see 350 and 450 Mbps speeds Router but I think that that only refers to wireless. Are there differences in the speed of a wired connection for all these new routers or are they all the same?
View 7 Replies
View Related
Sep 3, 2012
I currently have a Linksys WCG200 wireless gateway cable modem. The computers in my office are connected to it via ethernet cables and I use the wireless signal in the rest of the house for my laptop and guests. I'm (still) using Win XP Pro on all the computers.I'm about to start a work at home job doing customer service and I am not allowed to have a wireless network that might broadcast customer information, so I need to be able to prevent that from happening. I'm assuming I'll need two separate networks?All computers need internet access and if it's possible I would still like to be able to share files between the two networks (assuming I need 2 different networks), but it's not the end of the world if I can't do that.
View 4 Replies
View Related
Dec 14, 2012
I going to put have of the PCs on the wired and few want to do wireless. The company want the printers and scanners on the wireless. So how will the wired PCs find the wireless printer and scanner?
View 1 Replies
View Related
