Dell :: New V715w Loses Wireless Connection?
Dec 2, 2011
I just got my first wi-fi printer, a V715w. Even though the Wi-Fi light on the front of the printer is green, I very often can't print to the printer. I get a box saying the printer can't communicate with the computer. I would have thought that the green light was signifying that Wi-Fi communications existed. Wrong? Then what does the green light signify? When I check the settings on the printer front panel, it shows the all the correct info, SSID, etc.. Do I need to do something each time before I try to print in order to ensure a wireless connection exists? Shouldn't the printer stay connected to the Netgear dual band wireless N router all the time? The computer, Win XP, sp3 stays connected to the router all the time. I expected the printer to do the same.
View 12 Replies
ADVERTISEMENT
Dec 16, 2012
I just got a new Inspiron. I have wireless INTERNET NO PROBLEM, and I downloaded the driver ware for the DELL V715W.The two wont talk and I cant get it to print at all or complete the printer test page spool.
View 1 Replies
View Related
Oct 14, 2011
My V715w printer works on USB. How do I get it setup as wireless? I have followed all the suggestions in the book, my network works super for both my computers, but it won't recognize the printer will not recognize my network?
View 1 Replies
View Related
Mar 22, 2013
im trying to install a dell v715w all in one printer onto my macbook air, wirelessly. In order to do so the installation software says I need to download Dell Wireless Setup Assistant.
View 3 Replies
View Related
Jan 4, 2013
My Inspiron N5110 loses the wireless connection frequently. We have many other devices in the house -- laptops, iPhones, etc. -- that continue to work flawlessly through the same router when I lose my connection. The troubleshooter generally leads me to resetting the router, even though, as I have indicated, the router is working properly.
View 5 Replies
View Related
Jan 1, 2011
I have a new inspiron 1564 laptop that loses connection to my wireless internet within 10 minutes of booting up. Then if I reboot it does not connect at all, can't even find the wireless router.
My works laptop and iPhone connect to the same router perfectly.I've seen the following post a few times from pudgyone and tried following it :Go to device manager(right click my computer, left click properties, left click hardware, left click device manager). Click on Network and then right click on your wireless adapter, left click properties, power management. Uncheck the box, allow computer to turn off this device to save power.
In terms of the device manager I can't see a network option, there is network adapters and I've right clicked on Realtek PCIe FE family controller and unticked the box but this hasn't worked.
And with the settings, how do I get to the screen where I can change my router settings in windows 7? I think the firmware is updated remotely by my service provider sky.
View 15 Replies
View Related
Jul 31, 2011
Our entire office runs on wireless connections (laptops, printers, desktops, etc) and we have little to no connectivity issues considering. However, we just purchased a new dell laptop. the laptop connected but within 5 seconds immediate loses the connection and reconnects, disconnects, etc.. This is continuous. All other devices, 2 other never-before connected laptops and a tablet have all sucessfully connected without issues...only this new dell laptop does it. The laptop connects and stays connected to all other wifi connections we have tried it with (other corporate wifi and home wifi's). Dell has replaced the wireless card to confirm there was not issue with that (which I was confident there wasn't). Our IT contact suggests buying a new $500 router, but that is a little hard for me to accept seeing that only 1 device is having difficulties (his other reason for this was his concern that he couldn't access something like the router's management tool, or something like that). New Laptop is running W7 OS..
View 3 Replies
View Related
Jun 16, 2011
Print I have an IPAD and a Dell V715W printer. To print from the IPAD the printer has to be "Air Print" enabled. I cannot determine if the printer is air print enabled.
View 4 Replies
View Related
Mar 28, 2013
I recently got new internet service and now my wireless printer and laptop are not communicating. I think I need the wire to plug into the laptop + printer, but I lost it.
Printer: Dell V715W
View 1 Replies
View Related
Feb 9, 2012
Recently I have purchased Inspirion N5040 with Windows 7. I have observed the system looses internet connection when on Wi-FI.
Checked Ping on Yahoo & google with -t option and found few ping response and then a lot of request time outs.
I am sure you must be doubting the signal strength of Wi-Fi but I can confirm the signal strength was fine. In fact I performed ping test simultaneously on another laptop . The performance on other laptop was fine but on Inspirion N5040 I was finding too many Ping drops and was not able to browse properly.
I also, verified setting on Wireless adapter and found it is in DHCP.
View 1 Replies
View Related
Mar 3, 2011
I just bought a linksys AE1000 usb wireless adapter for my desk top computer because there are no phone lines in the room with the computer for me to connect the dsl modem. In the room with the dsl modem there is the Linksys E3000 wirless router. My desktop will randomly lose connection with the router yet other devices that use wifi in the house work fine (ex: ipod touch, android phone, and xbox 360.) i have went through and reset all devices and gave the desk top priority in the network but it hasnt worked. The desktop uses XP.
View 19 Replies
View Related
Nov 25, 2011
My D-Link DIR-300 very often loses connection on wired and wireless connections. It stops connecting to Internet randomly i.e. any URL typed in from the browser times out.I connect various devices such as desktop, laptop, ipad2 over wired and wireless connections and the behavior is the same from all devices when this problem occurs. If I make a direct connection to the DLS modem, it works fine for the whole day, without these issues.I also observed IP address conflict messages and my desktop does not connect to Internet if I am running VPN on my laptop, at the same time, occasionally.When this occurs, I am able to login to the router and can see the WAN status and the DHCP address being allocated to the router. I can even do DHCP release and renew, but that does not fix the problem.
View 3 Replies
View Related
Jan 18, 2012
I have a Samsung SCX-4623FW All-in-One Printer that will not maintain a connection to my wireless router a Linksys WRT160N. Samsung technicians have not been able to assist after multiple calls. They sent me to a printer repair store which reported they had no problem with the printer working on their wireless network. When I used the setup disk initially it would connect the printer to the network and I could print from my laptop wirelessly, but the connection never continued working more than a few hoursThe router has no problems in connecting to 3 different computers.
View 1 Replies
View Related
Aug 2, 2012
When ever my roommates and I turn on or turn off a computer or device to log onto our wireless network that computer or device and all other computers or devices that are on the network lose internet connection for about 3 minutes. After that period then all devices gain access back. We have a Cisco Linksys router, Model number WRT110, it is the Range Plus version. I got it 6 months ago from a friend that had never pulled it out of the box or used it. I used it before moving and it did not have this problem. We are using cable for our internet and have a Motorola Surfboard model number SB5101U for our Modem. We have 2 Dell computers, both about a year old, and a LG blue ray device that connects wirelessly to stream movies
View 4 Replies
View Related
Dec 27, 2012
Region : Canada
Model : TL-WR700N
Hardware Version : V1
Firmware Version : latest
ISP : Cogeco
I have a WR700N set up in bridge mode so as to provide a wifi signal in far end of our home. I used Bridge so we can tell which router we are connecting to. So we have two SSIDs (MySSID1 and MySSID2) Both with secure log-in. This works fine for about a day, and then disconnects. I then have to mess with the WR700N by plugging it in and out, maybe logging into it and changing something. Then it will work again - for a day
I updated the firmware with no change. Main router is a Dlink 615 with IP of 192.168.0.1. connected to cable modem. TP-LINK is set at default of 192.168.0.254 and gets a wireless signal from dlink.In an attempt to improve situation, I now have both units set to channel 11 and with fixed 20Mhz channel width. b/g/n on TP and g/n on dlink.
View 6 Replies
View Related
Aug 5, 2006
I have a 3COM cable modem and a WRT54GSV4 with v1.06.1 firmware for a home network. I have 2 desktop computers hardwired to the WRT54G and use 2 different laptops with internal wireless cards. All run Win XP Pro. I have spent numerous hours on the phone with Linksys support and always get the same response (reboot, unplug, reset, etc.)
View 9 Replies
View Related
May 2, 2010
I recently upgraded from a Linksys WRT54G2 that was a dream and gave me no problems at all to a Linksys E1000 that isn't behaving. Every hour or so it loses its PPPoE connection to the internet, so that both wired and wirelessly connected computers lose access. My laptop is also thrown entirely off the wireless network all together.
View 9 Replies
View Related
Nov 19, 2011
At home I have 3 computers and 2 mobile phones that connects to wifi network.Often, if I open up one of the computers that is sometimes off (laptop), then the network connection doesn't work anymore. I can still see the network in wifi choices on any device, but it won't connect to the Internet.
View 9 Replies
View Related
Dec 10, 2012
Region : UnitedStates
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : 3.13.23 Build 120810 Rel.44064n
ISP : Comcast
The 5 ghz connects fine for multiple machines however machines on 2.4 simultaneously lose their connection to the internet, sometimes saying it is still connected to the internet when it is not and sometimes losing connection with the router entirely. The 5ghz still works when this happens.
View 14 Replies
View Related
Sep 17, 2012
We have three WAP4410N that loses the connection. We've updated the firmware, changed the equipment, repeatedly reconfigured, but the problem persists.Is used the firmware 2.0.5.3 with WPA2 Enterprise Mixed authentication.
View 5 Replies
View Related
Jan 24, 2012
I have a problem with my E3200 that has happened at least 4 times since I first purchased, installed and configured it. Initially I thought it might be something with Comcast, but a) I never had the problem with my Linksys WRT54G router and b) It seems I can now duplicate the issue by saving a config file and restoring it.The specific issue appears to be somewhat random. At some point the connection to the Internet simply stops for no apparent reason. I am able to ping the router and connect to it. I am also able to drop and renew connections to the cable modem successfully. Furthermore, I can ping my network side of the router, as well as the external address handed to my router by the cable modem, and the cable modem gateway address, but still no connection to the Internet.The only solution to my problem has been to restore the factory defaults to the router and reconfigure it from scratch, which does seem to fix the issue for a time until it occurs again. FYI, I do not use the Cisco connect software because I have several custom port and QOS configs that are necessary for an IP Phone and other hardware on my network.
View 1 Replies
View Related
Nov 24, 2012
I have had my WRT310n for at least a year now. When I first started using it, my broadband speed would drop after a while till it was sometimes under 1mb. I have Charter high speed. I checked around here and found that heat may have been an issue so I got it propped up so I had some airflow under it even though it didn't feel hot when checking. I also updated the firmware then and for a long time it seemed to have cured the issue. Lately though, the problem is back. I updated firmware again but still no change. The unit is cool to the touch so heat is not the problem. After turning off for a bit and then rebooting, the speed goes back to normal and stays that way for a few days. I also tried rebooting my cable modem to test that aspect but after doing that, no change. Just rebooting the router fixes things. I'm at a loss. I can't keep having this happen especially since my wife works remotely from home.
View 7 Replies
View Related
Apr 23, 2013
Region : UnitedStates
Model : TL-WR940N
Hardware Version : V1
Firmware Version : TL-WR940N_v1_120201
ISP :
Just bought a TL-WR940N and it was always loosing connection and freezing / locking up. I upgraded to the latest FW from the link below URL but it still freezes and loses connection to devices after 8-12 hours, keeps hanging up and pages sometime don't load.
View 14 Replies
View Related
Apr 11, 2013
Having just received a new Dell XPS8500 running on Windows 7 and I have the following problem: My wifi connection is turning off and the name of my network is no longer displaying in the list of available networks. This means that I am unable to access the internet or emails rendering the computer unusable as I am not on broadband (using access from another router close by). It is absolutely critical that the wifi connection is always on.
View 3 Replies
View Related
Dec 13, 2012
My samsung galaxy phone with android os connects to the weak signal of the far away router in stead of connecting til to range extender close by.Signal from extender is strong but the phone seems to have problems in obtaining the IP addres from the extender.Have returned to factory settings and made new setup - but still the same problem, and only with connecting tilthe Xyzel range extender 2205?
View 5 Replies
View Related
Jan 1, 2013
I recently replaced an old Linksys with a Cisco E3200. All our devices get "stuck" periodically and can connect to the E3200 but not the internet. We power cycle the E3200 and all is fine. But only for a period of time, then we need to power cycle again. The range is less than my 4 year old Linksys was also, devices maybe 30 feet lose their connection even more quickly, forcing more frequent power cycling.
View 2 Replies
View Related
Nov 17, 2012
I have a WRT160 V2 router with firmware v2.0.02. I have had the router for years without any problems. A few months ago I have started to see an issue where I lose connection to my internet on my laptop, and wifi on my phone at the same time. I have wifi calling on my phone and it disconnects also at the same time. All of a sudden, everything will stop working, then about 40 seconds later, it all works again. I lost the connection maybe every 30 to 60 mins. I rely on wifi calling for my primary phone, and I end up getting cut off when talking to people. BTW wifi calling is for all tmobile phones, but also normal wifi to surf the web on my laptop and phone drops too at the same time.
View 7 Replies
View Related
Apr 22, 2013
I have a new EA3500 router that's working great for a variety of devices* except a Windows7 laptop. 24 hours after establishing a connection, the laptop loses connectivity and it's very difficult to re-establish a connection. Usually I have to reboot the router, but 24 hours later the problem returns and Windows is unable to connect.
My router settings include DHCP client lease time set to 1440 minutes (24 hours), so I thought the problem might have something to do with DHCP lease renewal. To test this theory, on Saturday night I did ipconfig/release and ipconfig/renew and established connectivity from the laptop.
Sunday morning I spoke with Linksys support and changed several settings per their recommendation:Network mode mixed (I had it on N-only for some reason)Assigned different SSIDs to the 2.4GHz band and 5 GHz band2.4 GHz band channel is 20MHz only, using channel 95 GHz band channel is 40 MHz only, using channel 161I also power cycled the router. Everything worked fine until Sunday night, 24 hours after the release/renew, when I lost connectivity. I am not sure what to try next and whether the problem lies with the router or the laptop.
View 2 Replies
View Related
Feb 25, 2013
I use a WUMC710 bridge with desktop PC and a Printer connected to it. When those two devices have been inactive for a while the bridge goes into sleep mode and loses the connection Back to my EA6500. Trying to print something from wireless devices connected to the 6500 elsewhere in the network doesn't "wake up" the bridge. Ihave to unplug the power supply and restart it.
View 2 Replies
View Related
Aug 28, 2012
I have Roadrunner Turbo and when it's online it works fantastic but after a couple hours or a days the modem loses it's connection for 30 minutes to many times a whole day or two.
When it loses it's connection I've tried disconnecting the modem and the router, waiting a minute and plugging it back in. I've tried reconnecting the cable wire and nothing works. I've even tried going to the TWC center and replacing the modem with a new one and it still happens.
The router I have is a WNDR3700 and it works great. We never lose connection to the router but the modem will lose its connection for when this happens the router's usual lights are on and we are all still connected to the router but the modem has only 2 solid lights and 1 blinking one.
View 1 Replies
View Related
Jan 21, 2013
I currently have a d-link DIR-615E3 with the latest dd-wrt firmware (v24 from 2010-12-13). Everything seems to be ok when I boot up the router - with factory settings and unsecured wireless, I have an internet connection. When I enter the GUI, create a router username/password, everything is still fine. Then, when I create a wireless security password (WPA2 personal) I lose internet connection, and the only way to get it back is to do a hard reset of the router. This also happens if I change any setting within the ddwrt interface, not just the wireless settings. (I also have a linksys WRT54GL with ddwrt with absolutely no problems) My cable modem is a motorola surfboard SB5101U, ISP is comcast cable, running windows 7.
View 6 Replies
View Related
Mar 26, 2013
Mediacom is my cable provider. They came out a few months ago and thought the problem was their Motorola modem. They replaced it with an RCA (Thomsen) which worked great for about 3 months.Now (3/13) I am losing my connection at least once a day.I started to download the new Netgear Firmware update, but in the middle of that, you guessed it, the connection dropped. So now my router is useless. There's probably a way to reset it, but I haven't found that yet. And so far the Netgear phone # is locked inside the router somewhere! I'm hard-wired to the RCA modem now, so we'll see. I have a feeling, after reading the previous thread, that my connection will be fine.I have my own cable modem, needed for a previous cable provider, and a new Netgear N600 2-frequency router.
View 2 Replies
View Related
Jul 17, 2002
Network was:
AT&T Broadband ISP
LanCity LC-PET3 cable modem (non DOCSIS)
Linsys 4 port hub
2 Win98SE PCs
All worked fine
New network is: Same as above, with a Linksys 1 port router (BFSR11) between the cable modem and the hub.
Router is configured to be a DHCP server (default configuration).
I assigned the router a custom WAN side MAC to match one of my two PCs to avoid having to call AT&T to get things running.
Results: Everything runs perfectly fine initially, but after leaving and coming back to either system (left on, in standby) after quite a while (going to work / bed), the network connection is dead.
WINIPCFG still reports the same IP, but seems to hang forever if I attempt to release / renew. The router's is unreachable for configuration / status (it's still on the default IP of 192.168.1.1) Pressing the reset button on the back of the router restores the internet connection (quickly too - I'm back online in about 15 seconds).
Entering standby manually and coming back out again after just a couple minutes does not affect the internet connection - it seems to only occur when I'm off for an extended period of time. I have no had the time to determine what the period of time is, and if it is a fixed time since DHCP lease / initial startup, or if it is a fixed amount of inactivity time (or maybe even not a fixed amount of time at all).
View 7 Replies
View Related
