I have TP Link TL-WR740N , Firmware Version: 3.12.11 Build 110915 Rel.40896n . All working fine , but one problem whan I put my PC to sleep mode , and roter stay working , after when I awake PC it lost connection with router !
View 2 RepliesI have a new Linksys E3000, 2 wired disktops (1 windows 7, 1 windows vista), 2 wireless laptops (both windows Vista), whenever the computers power down into sleep mode and are woke up, I have lost my connections to the router and I am forced to restart the computer. I've been told by one person that this is a problem with vista and windows 7, but wouldn't that have been a problem with my old router also?
View 9 Replies View RelatedI use a WUMC710 bridge with desktop PC and a Printer connected to it. When those two devices have been inactive for a while the bridge goes into sleep mode and loses the connection Back to my EA6500. Trying to print something from wireless devices connected to the 6500 elsewhere in the network doesn't "wake up" the bridge. Ihave to unplug the power supply and restart it.
View 2 Replies View RelatedI have a Dell E4300 with a 1510 wireless mini adapter running windows 7 pro with a netgear WNR3500 router running wireless N protocol. I have my laptop setup to sleep when lid is closed. When it awakens the wireless connection will not automatically reconnect and I have to manually select the SSID and connect. It will also reconnect if I use the network troubleshooter. The problem does not happen if I reboot the PC or start from a power off situation. I have the latest Dell driver and I am running the DWLAN utility.
View 3 Replies View RelatedI Buyed a new laptop yesterday(24-04-2012) so original W7 and i updated everything incl drivers and everything was great and i let the laptop on when i Was going to sleep and my wireless and lan internet did fine.. But then.. when i wake up suddenly it tells "No Connections Are Available" and i cant find any wifi's anymore + lan does not even work, but the adapters are both working fine it says + they are up to date, the router is fine cuz i have lan on pc and wifi on samsung galaxy, everything about wifi is on incl the button on the laptop..I only have 1 antivirus or so program and i have a red cross @ network and sharing settings?Network adapters (They both work): Atheros AR9285 wireless adapter & Realtek PCIe GBE family controller (both newest drivers installed)
View 3 Replies View RelatedI am using InnoMedia MTA6328-1Be2S from Reliance and D-link DIR-600 for sharing internet connection. I have a strange problem here after using internet for sometime..I will not be able to use internet unless I shut down and restart both Innomedia and D-link.I tried changing configurations in D-link but with no luck. I lost the connection no matter I am using wireless or wired mode.I do not know how to login to InnoMedia MTA6328-1Be2S as well.
View 1 Replies View RelatedWhile watching movie - screen goes blank and 'error mssg ' states error is preventing slide show from playing'
View 1 Replies View RelatedHave already checked in the Device Manager if the �Allow this device to wake the computer� is unchecked.What do I do to bring the sleep mode back without turning off the file sharing (if file sharing caused the problem)?
View 1 Replies View RelatedSo whenever I put my desktop to sleep and then turn it back on, I cannot connect to the internet. My laptops are fine and can connect to the internet w/ the wireless however.When I have windows diagnostic run a troubleshoot and repair, it tells me it can't communicate w/ the primary DNS server and that resetting the Local Area Connection will fix it (And it does).If I restart the computer, it seems to fix this problem as well.I don't get why it can't communicate w/ the DNS and that I have to manually reset the LAC everytime I turn on the computer from sleep mode.
View 3 Replies View RelatedI used to have ATT DSL but we recently switched to U-Verse. I have a Trendnet TEW-452BRP 54g wireless router than was handling the PPPoE function. It was set to work flawlessly with my wireless cards. No dropped connections, speed or security issues. It always connected quickly from wake up and on start up. Now we have a 2Wire i38HG wireless router/gateway and it's been difficult to properly set my network up as before. I use the Trendnet behind the 2Wire as my wireless router. Took me a while to figure out what to do, but DHCP is disabled on Trendnet so 2Wire does what it needs to. This option works fine for me. The only problem is that at first my wireless card would not automatically connect to the network through the Trendnet when it is in range like I had it set to do previously. When I would force it to, after 3 times it would magically connect on it's own. I made some changes in the Trendnet (Mainly disabling dynamic DNS and NAT) and that seems to have made a difference. To be honest, I don't know if that is significant or not or if it actually made a longterm difference but it seems like it has. So my problem is now that when I put my laptop to sleep and have it wake up, it does not automatically reconnect. It takes about 2 minutes then it does on its own. I read the event viewer and this is the info it gave me - Your computer was not able to renew its address from the network (from the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Warning
OpCode - IpLeaseRenewalFailed
Source - Dhcp-Client
Then after 2 minutes -
Your computer was not assigned an address from the network (by the DHCP Server) for the Network Card with network address 0x0018DE0682D8. The following error occurred: 0x79. Your computer will continue to try and obtain an address on its own from the network address (DHCP) server.
Level - Error
OpCode - IpAddressNotAssigned
Source - Dhcp-Client
After this, it connects by itself. I don't believe I have configured the 2Wire or Trendnet properly, so I need some guidance and suggestions on this matter.
Laptop - Intel Core Duo 1.66ghz, 2gb Ram, Win7 Professional with SP1, Intel PRO Wireless 3945ABG
2Wire - 192.168.1.254
Trendnet - 192.168.1.1
- I did not change the IP of the Trendnet and I am not sure if I have to.
From the 2wire - Private Network
Router/Gateway Address192.168.1.254
Subnet Mask255.255.255.0
Private Network DHCP Info
Range192.168.1.64 � 192.168.1.253
[code]....
I am completely baffled by what is going on, on our network. We have four HP C4005 Printers. All of them connected to different switches around the network. About every 1-3 hours they all give the error 49FF09 (which is pretty vague, basically a network connectivity issue). Have to reboot to get rid of the error, then it will work again for an hour or so and give the same error (whether print jobs have been sent or not). This started a few days ago out of no where.
I am starting to think its an issue with the network, because they will all go offline at the same time. If I run a constant ping to them, they will all go offline at the same time and return the error. We use all cisco equipment. If I check the port statuses they all say up 100 full with no errors.
I have tried disabling sleep mode on the printers, turned off multicasting, updated firmware for printer and for jetdirect, and used different drivers.
I am trying to download large files which are taking about 3-8 hours to download. I don't have that much time, so I have to put my computer into sleep mode. Now, the problem is, I put it into sleep mode, turn it back on, Chrome says the downloads are finished. I open one of them, and it says the file is corrupt.
View 14 Replies View RelatedI'm using aironet 1210, 1130, 1100, 1040 autonomous mode, in a University campus network with thousands of daily user.We're using RADIUS authentication and AES/WPA2.In the past, there were some major issues with traffic (broadcast / multicast) in the wireless networks, that would spread all around the campus causing excessive processing at the access-points.To solve the problem we decided to implement access list at the radio interface to drop all the unwanted traffic. [code]
I'm pretty sure this is caused by the ACL (I've tested removing the ACL and the issue never occurred) but I can't just get ride of it.
Any alternative way to drop broadcasts?
indows 7 Studio 1458 Crashes when entering Sleep Mode
View 2 Replies View RelatedI have a Dell Inspirion M5110. Windows 7, 64 bit.
When ever I open the lid to the laptop it takes 5-10 mins before it will automatically connect to a network. Diagnose this network does not find anything, nor provides any troubleshooting. Typically if I open the network connections center and disable the wireless, let it sit for 30 secs or so, and re-enable, it will finally connect.
I know it's not my router, as the laptop does the same thing at work, and multiple different friends house.
I've confirmed that DHCP is set to automatic connect. I've also checked Device Manager/Network adapters/ and unchecked the box "allow the computer to turn off this device to save power"
I have a Win 7 laptop which keeps dropping its network connection. I have changed the power management option on the network card so it can't turn itself off, but it still goes to sleep after a certain amount of time.I've also tried with a different docking station and network cable in case that was an issue, but the same thing happens. Event viewer does not reveal the cause of the drops.
View 1 Replies View RelatedMy mother's ISP is an AT&T DSL connection. She just had her PC connected directly to her modem for several years, so I eventually got her a router so when her kids and grand kids came to visit they could use wifi. It was a very basic and inexpensive Belkin model, but I don't recall the model number. The problem was the Internet connection would become inactive every time the desktop PC that was connected to router via Ethernet would go to sleep. The only way to get the Internet connection back was to wake up the desk top PC. I checked all of the router settings, googled to see if I could find similar problems, etc... and never could fix it; so I eventually set up my trusty old wrt54g at her house. It worked fine in my home for years; and when I set it up at her house, it still had all of my original network settings in it. I just changed the network name and password.But the same issue is still there. Every time the desktop PC goes to sleep... The router loses Internet connection and does not get it back until the desk top is made active again
View 7 Replies View RelatedI have three computers on my network. Two are wired and one is wireless. I continually run into the probably of getting a limited connection after the computer goes to sleep and I wake it up. I attempt to automatically correct it, but this doesn't work. I try to use the command prompt with ipconfig/release ipconfig/renew and it doesn't work. Then I try to disconnect the adapter and it doesn't work. I also reset the modem and the router with no resolve. Most of the time the only thing that works is restarting the computer. In addition I do use DHCP static addresses for the computers on the network. What is causing this and how do I fixt it without restarting the computer?
View 4 Replies View RelatedMy laptop is an Inspiron N5010 running the standard Windows 7 64bit. When returning from sleep/hibernate, the internet wont connect automatically. And there is a little red cross over the Internet access icon in the bottom left.After I click to connect to the network it still cannot make the connection. And a yellow '!'' appears over the icon. After I click 'Troubleshoot problems" it will make connection though it can take a minute till its up.
I have checked the option to automatically connect to the network in range. And this used to work fine, but somehow it doesnt work correctly anymore.I have the latest bios and network drivers already.
the modem is open.the router also is open but dont have internet access.
View 1 Replies View RelatedYesterday we had a very brief power outage and until then everything worked fine. Small business that runs modem - router - switch. Since the power outage I can only get internet if I run straight into the modem. As soon as I run from the modem to any (tried 3 different ones) router I lose internet. I get a wireless signal on my router. I've reset the router to default settings. I've plugged in another router to the modem to check and I don't get anything from that router either (which was not plugged in during the power outage).
View 1 Replies View RelatedWe lost internet connection and found out that our router's light is off. Is it possible that something is wrong with the adaptor?
View 1 Replies View Relatedrecently bought a new Linksys EA3500 that is connected to my SB5120 cable modem. For two weeks it's been running smoothly but when my cable modem is in need of a power cycle.I power cycle both the router and modem but my connection is lost. it's after countless hours of messing with the two I'll get the connection back but I'm afraid it'll lose connection again, that and I fear I may have enabled bad options.
View 10 Replies View RelatedAfter a brand new Router/Modem combo., there is NO local/wired connection with XP, although other PCs has a good connection with strong signal.
Is it because a spectific folder needed for wired/local connection got lost, .... or Networking card inside got defective?
I been using my WRT54G with no problems for 2 years now. I lost wireless. I have 1 pc wired to the router and it works fine, e-mail, accessing the internet, everything. But I have 6 wireless devices ( 2 PCs, a printer, Nintindo 3Ds, a laptop and a nook) that use the wireless part of the router at different times. Anyways, last night, one of the wireless PCs lost connection, not seeing the router. Then I checked with each of the other wireless devices. None of them see the router. I tried many different things: powering down the router for two hours, hitting the reset button for 30 seconds, I even uninstalled the router and re-installed it and ran the setup-wizard. Again the pc I have wired to the router works but none of the wireless devices can see the router.
View 1 Replies View Relatedi tried to change my nat type to open, on my Netgear WNR2000v1.i connected throught typing my routers ip. (192.168.1.1)i watched a utube video, where someone told me that i had to changed something in the basic section to 2, instead of auto.now i cant connect to my router. ive tried with multiple pc's.
View 5 Replies View RelatedI'm having issue with wireless connection on Belkin router F5D7633-4.Every 1-2 days my router disconnect and reconnect for no apparent reasons. When this happens, it affects it's wifi. All the devices in my house couldn't connect via wireless to this router. The only way to get these devices connected is to manually reboot the router.Do you know how to allow the router to allow many devices connected at same time?
View 2 Replies View RelatedThe problem: running a standard single band 2.4gz BT homehub. When using my xbox and wireless headset (razer chimeara) the xbox loses connection. When i tuen the headset off i no longer lose connection. This suggests to me that the headset is simply emitting on the same frequency and bullying the connection, thus the xbox disconnects I have purchased the wireless N adapter to allow the xbox to run on the 2.4 or 5ghz band. I am now looking for a duel band router to allow my xbox to connect to the 5gz band and hopefully this will rectify my interference issue with the headset. I have been lookijg at the e4200 as this supports seperate ssid for 2.4 and 5ghz band, so the xbox can run on the 5ghz and the intererence from the 2.4ghz headset should subside - do you think this would work? Also, with the single ssid duel band routers, where 2.4/5gjz share the same ssid - how would my wireless N devices know to run on the 5ghz and not the 2.4?
View 3 Replies View RelatedMy router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
I switch on router and connect my iPad on router linksys cisco e2000. During 10 minutes, There is no problem. After 10 minutes, I have always the connection with my router but no internet. To Avoid this problem, i restart the router with switch and after, no problem. Do you have any ideas to avoid this lost connection after 10 minutes when I switch on my router.
View 2 Replies View Related My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
I have a Mac laptop. Verizon ISP.
I used the CD to set up my new EA3500 with my Wild Blue Satellite internet modem.An IPhone or IPad can connect and work like a charm, remaining rock solid at all times. Windows 7 on the other hand, will work and then lose connection to the internet. The PC appears to remain connected to the EA3500, but the connection between the EA3500 and modem appear to be lost. I can click on the bar Icon at the bottom and it shows everything to be fine. I click on disconnect and then wait a few seconds and click on connect again and it works for a few minutes before having to do it again. When I look at the router properties the CD set it up for DHCP.
View 2 Replies View Relatedi got a Dir-655 router and Dell 1501 wireless -N mini PCI card (802.11 bgn compliant). Router was set to mix mode but my desktop Dell XP8300 can connect only till G mode.
1) I search on web and some said that i need to set my router to N mode only for my desktop to connect to N mode. IS THIS SOLUTION CORRECT??
2) Another issue was my sis got other old brand latop which can only connect to B mode, if i set to N mode only, she won't be able to connect it right?