Belkin Router Restarts All Devices Lost Connection Through Wifi
Aug 18, 2012
I'm having issue with wireless connection on Belkin router F5D7633-4.Every 1-2 days my router disconnect and reconnect for no apparent reasons. When this happens, it affects it's wifi. All the devices in my house couldn't connect via wireless to this router. The only way to get these devices connected is to manually reboot the router.Do you know how to allow the router to allow many devices connected at same time?
View 2 Replies
ADVERTISEMENT
Mar 12, 2013
I am running winsxp prodessional.I have a belkin N600 DB Wireless N+ Router and it is hooked up to a vmax 480 security syestem . this system allows me to see the cameras remotely on my ipad, i iphone amd laptop .
my problem is this the router shuts down and restarts( it must be programmed to do this ) and i lose the remote connection to the cameras. if i am home i can unplug the vmax and it will restart and find the router etc however when i am traveling i can not do this.
View 1 Replies
View Related
Jul 20, 2011
My router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
View 2 Replies
View Related
Apr 29, 2012
My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
I have a Mac laptop. Verizon ISP.
View 2 Replies
View Related
Jul 16, 2012
I'm using LMS 4.0, after I auto discovery device, I can see all of devices on my network but I cannot view the links connect between the ASR 9000 and Catalyst 6509. I've just checked cdp neighbor on these devices, I can see the full of neighbors.
I attach 2 file, with the visio topology and the topology view on LMS , and I'm 100% sure about the connections between these devices are used. I try to re-discovery many times but it not work correctly.
View 2 Replies
View Related
Apr 30, 2012
I bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
View 2 Replies
View Related
Jan 30, 2013
About 2 years ago I bought my first laptop and the person I was with recommended my purchasing of a Belkin router. I bought the router, it worked great until this past summer when suddenly whenever somebody called my house phone, my connection was dropped. I was angry cause naturally I have those family members that want to call and talk on the phone with my mother for hours. Eventually I figured out I could work about the problem by hooking the Ethernet cord on my Westel directly to my laptop. Its a temporary fix though in my opinion because this requires me having to sit on the floor against my bed room door and this isn't comfortable, not to mention its also confining, I miss walking around the house with my laptop. Anyway this past weekend I decided to try buying a new Belking N300. This however didn't solve the problem, I still got my signal dropped whenever somebody called the house.
View 14 Replies
View Related
Apr 28, 2011
i just recently went back to the work force and i needed to get a laptop connected to the office router..but we didnt know the password.4 hours later all we managed to do it get knocked off line on the directly connected pc..i was disgusted with the people...but i also noticed then when the typed in the ip address in the search bar it would not pull up the Admin box..it just pulled up a search result.We changed the ethernet cords back n forth..just a real mess while speaking with them.
View 3 Replies
View Related
Oct 15, 2012
Just had a new wifi usb adapter delivered today and tried to connect my desktop pc from my room to the bt home hub 2.0 in the kitchen. This is only 13meters max to walk and 10m if going through 2 or 3 walls. I installed the ralink drivers and plugged in the adapter which my computer then installed fine. It will pick up some networks including mine which i managed to connect to but only at a very low rate. Not after very long the connection will disappear and so will all the other houses networks. If i then pull it out and plug it in again they appear again for a short while?
I use my parents packard bell netbook in my room and it works fine. It could well be the case that this adapter was pretty cheap from amazon and you get what you pay for..
This and the two attachments contain your required info.
BT Broadband
BT Home Hub 2.0
DSL
[Code]......
View 6 Replies
View Related
Jun 3, 2011
I am actually able to have fun surfing on the Net with this toy computer, provided I don't expect to watch videos or listen to music or download anything. I bought it for a few Euros in France where it is known as the "SurfOne mini PC Ref. INOS1CE"; I think it is the same as the Chinese "OEM mini laptop netbook". It has a 7" screen, a 2 MB memory and claims to run on Windows CE 6.0.My problem is that after successfully connecting via WiFi to my "Orange Livebox" modem and router for a few days, I then lost that connection and can connect now only by cable.When I turn on WiFi power, it recognizes the "Livebox", but then states that it is not receiving any signal and the connection fails. How to restore WiFi.
View 1 Replies
View Related
Jan 8, 2012
went to uninstall the other two and then went to install our new one on the main computer.I have now lost connection with the wifi to this pc and only this one. (the internet still works on two laptops) unfortunately i need this computer for work and therefore need the internet quite urgently. Perhaps uninstalled something by accident and if so what is it and what can i download?
View 3 Replies
View Related
Mar 5, 2012
after few years without problem with wifi connection at my home, four month ago began wifi lost connection.
4 iphone with assigned ip address;
3 Portable PC (2 with dhcp and N band, 1 with assigned ip with G band)
Router is not too far from wifi equipment
the wifi is protected with WPA-PSK
Often during day, on pc and iphone we have lost connection, we can see in settting the SSID of my wifi lan, but if we try to connect recive message:Unable to connect to casa(casa is my ssid), on router the wifi led is green fix (not blinking) and only after a few minutes or many try wifi return aviable (for all equipments at the same time and the wifi led blinking)If I want quick connection, without attempt, i simply power off router and after power on, the wifi connection begin aviable!
1. changed SSID, very different from other SSID of my neighbors;
2. changed class of ip address (from 192.168.x.x. to 10.16.x.x);
3. wifi with no protection;
4. tried with & without mac address filter;
5. tried with only 1 wifi connection.
View 3 Replies
View Related
Apr 2, 2011
I lost the WEP key for my Belkin N+ wireless router.I bought a new wireless printer and cannot connect it through the router without the WEP key.How can I get the WEP key #.
View 1 Replies
View Related
May 10, 2012
I had to unplug my belkin router and get a new modem from my cable company and lost the piece of paper that comes with the router when you buy it saying your name and ssid code. what can i do to get a new one?
View 2 Replies
View Related
Dec 26, 2012
I have a wire ADSL connection and I use ADSL WiFi enabled router for distribute my internet connection with in my other devices (on my home network). When I downloading large files (more than 30MB) over the internet using my WiFi connection, my connection drop several times. However if I exchange large files within my WiFi network (with in home network via WiFi), my WiFi connection not drop (I can exchange 6GB files without any issue). Why is that? Is it my router issue or my ADSL connection issue? Most of the time after I lost internet connection, i can see my WiFi connectivity standby, it's not disconnect. However some time it completely disconnect. After I lost the connection (standby or completely disconnected) it again automatically connect.
I face this issue if i download large files on the internet, via the WiFi, if i download large files on internet using Ethernet cable, my connection not drop, it's stable. I use default wireless settings on my router? I use open WiFi connection.
View 2 Replies
View Related
Dec 7, 2012
lost password for belkin wrt54g2 router
View 1 Replies
View Related
Dec 15, 2012
Trying to connect new iPad with Belkin router but have lost the password.
View 5 Replies
View Related
May 27, 2012
Dlink Dir-657 keeps losing internet connection on wifi devices only . the connection remains to the router but no internet .if I disconnect the connection i am unable to reconnect to the router until i reboot it. My internet remains on my network cabled devices .I am running on an empty channel 3 , usually happens 20 to 60 minutes after the router is up . Dlink sent me a replacement refurbished one and this one is doing the same thing . I owned the original one for about 5 months with no problems at all ,no new electronics in the house and have not changed the placement of the router .
View 4 Replies
View Related
Nov 25, 2011
Have a MacBook and using Firefox. All lights on the router and modem are green. Does the same thing no matter what distance laptop is from router/modem. Seems to do it in 2-3 minute intervals.
View 1 Replies
View Related
Sep 10, 2012
I have done all the resets, factory resets, hard resets, and any other names. When I attempt to enter any sort of IP addresses,default Belkins and ones I see when viewing ipconfig, all it does is perform a Google Search with the numbers.Again, turning on wireless on my laptop and phone fail to find my router, which used to just be called "Belkin".Here is all the info that I believe you need:
IP- Comcast
Modem-Cisco DPC3008
Router - Belkin F5d7230-4 V1444 (althought a little old, have never had major issues untill a couple days ago)
Windows IP Configuration
Host Name . . . . . . . . . . . . : JBerman-Win7
Primary Dns Suffix . . . . . . . : mmreibc.prv
Node Type . . . . . . . . . . . . : Hybrid
IP Routing Enabled. . . . . . . . : No
[code]....
View 19 Replies
View Related
Sep 4, 2011
I have a Motorola modem SURFBoard SB4200, along with a wireless Linksys router that connects to that modem. The router works normally but the modem often dies and restarts itself after about 1-2 minutes.
What could be causing this problem? How should I start debugging it?
Could an excessive amount of network traffic be bringing down the modem? Are there any tools that can monitor the modem?
View 2 Replies
View Related
Feb 28, 2013
i lost the admin security password of my N300 Share modem-router. How can i return to the factory settings ?
View 1 Replies
View Related
Nov 20, 2012
My N150 wireless router sees 25mb+ speed from my internet connection but my wireless connects at 1mb. Why is the WiFi being resricted?
View 2 Replies
View Related
Jan 14, 2013
When i try to enter the password for my N300 Belkin Router into my wifi connection setup in my computer it will not accept any letters, only numbers.
View 1 Replies
View Related
Sep 2, 2012
I've lost wifi router password. how can i find it?
View 1 Replies
View Related
Feb 5, 2012
I lost it on my old laptop. Figured it was time to get a new computer anyways, we bought a new one, along with a Playbook. Both the new computer and the Playbook have had this problem, though they were able to fix it.They all use Wi-Fi.
View 2 Replies
View Related
Nov 3, 2012
i have lost my code from the tenda wifi router modem which we can use to put security.without it how to secure wifi?
View 1 Replies
View Related
Feb 1, 2013
Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_121123
ISP : Tre
I have owned the TL-MR3420 for about six months and never had any problems with it, 3G connection stable enough and wifi and LAN worked properly without any drops.About one week ago I started experiencing problems. Both wifi and LAN gets disabled and I need to pull the plug and do a hard reset to correct the issue. This only happens after some heavy use, many devices is connected to Wifi, streaming files over the WIfi and so on. A scenario may be the following; there are six devices back home using all using wifi. All of them are not connected at the same time, but four may be; usually three computers and one tablet. The HTPC may do some heavy videostreaming from another computer. When the streaming is over, some devices are shut down then I may lose the WIFI and LAN ability of the router.
I have tried connecting with cable after wifi were lost but no IP address where given to it and connection where refused. This means I have no possibility to access the log file in the router, and after reboot the log file is reset. Router settings is pretty much default.Is my device broken or is there any setting I may tweak with?I have updated to latest firmware and tried to change channel without success.
View 3 Replies
View Related
Apr 20, 2013
Last Sunday, I put lots of music files into usb storage, a external harddrive linked to EA4500. which is WD element 3T.Last Wednesday, I re-organize file folders. And then yesterday(Friday), I found all my files were lost.
View 1 Replies
View Related
Jun 30, 2011
We have the Linksys WRT150N router. A while ago it suddenly lost the name we gave it when we set it up and now it shows up as Linksys. Also, it is no longer secure, and sometimes we can't even see our network - it isn't even listed. How do I go in and change this? Will I have to reset the wireless information on my printer, etc?
View 4 Replies
View Related
Apr 15, 2013
For some strange reason I was looking at my router and wanted to check and see if there were any firmware upgrades available. I was not having any issues. I noticed that there was an upgrade and one of the notes indicated that it fixed some speed issues. I saved my config before upgrading and reloaded config after upgrading the firmware.Since the upgrade, I have lost connectivity to my printer and have intermittent issues with my remote dvr.The printer is connected wirelessly thru a wet610n.The dvr is connected wirelessly thru a wet610n.I can ping the printer, and I can access the printers web page. The issues appears to be two-way communication.The printer is an HP Officejet 6500a and allows eprint. The printer can no longer contact the eprint server.I have turned off my firewall on my computer and still cannot pring (why would I have to change this anyway, it worked before.)I use a ddns server for software access to my dvr. It worked flawlessly before.Now, the dvr is visible sometimes and sometimes it's not.
My wrt610n is v2 hardware.I called for support, but of course since the warranty has ended, support has ended unless you pay.Nothing like a firmware fix to break your router.I am very disappointed with the upgrade and the support provided.
View 2 Replies
View Related
Jan 7, 2012
What's happened is that after transferring my old PC's data onto my new one, and putting that one in place of my old one, therefore hooking up my modem to it, my wireless devices have been having trouble connecting to the router. Everything's hooked up fine, and it was working perfectly before, but now my devices such as my laptop and Droid Pro can SEE the router (As in connect to it and say that they are getting excellent signal strength), but when I try to open my browser, it asks as if I'm not connected to anything at all. The PC that's wired to the modem through the router works fine, however.
View 14 Replies
View Related
Dec 2, 2011
I updated the fimware on my WRT160N v3 and followed it up with a reset of the router. I then restored the router settings that I had saved. All the settings appeared to be good, but none of my wireless devices would connect. I reneted the pass phrases (WPA2) but still nothing. Tried to change the passphrase, still no good. I then did a factory reset of the router from the setiings page and manually re-entered and save the settings, again nothing. All of my devices are able to "see" the network and the correct SSID.
View 9 Replies
View Related
