Lost Wifi Connection To Printer
Apr 28, 2011
i just recently went back to the work force and i needed to get a laptop connected to the office router..but we didnt know the password.4 hours later all we managed to do it get knocked off line on the directly connected pc..i was disgusted with the people...but i also noticed then when the typed in the ip address in the search bar it would not pull up the Admin box..it just pulled up a search result.We changed the ethernet cords back n forth..just a real mess while speaking with them.
View 3 Replies
ADVERTISEMENT
Jan 8, 2012
went to uninstall the other two and then went to install our new one on the main computer.I have now lost connection with the wifi to this pc and only this one. (the internet still works on two laptops) unfortunately i need this computer for work and therefore need the internet quite urgently. Perhaps uninstalled something by accident and if so what is it and what can i download?
View 3 Replies
View Related
Oct 15, 2012
Just had a new wifi usb adapter delivered today and tried to connect my desktop pc from my room to the bt home hub 2.0 in the kitchen. This is only 13meters max to walk and 10m if going through 2 or 3 walls. I installed the ralink drivers and plugged in the adapter which my computer then installed fine. It will pick up some networks including mine which i managed to connect to but only at a very low rate. Not after very long the connection will disappear and so will all the other houses networks. If i then pull it out and plug it in again they appear again for a short while?
I use my parents packard bell netbook in my room and it works fine. It could well be the case that this adapter was pretty cheap from amazon and you get what you pay for..
This and the two attachments contain your required info.
BT Broadband
BT Home Hub 2.0
DSL
[Code]......
View 6 Replies
View Related
Jun 3, 2011
I am actually able to have fun surfing on the Net with this toy computer, provided I don't expect to watch videos or listen to music or download anything. I bought it for a few Euros in France where it is known as the "SurfOne mini PC Ref. INOS1CE"; I think it is the same as the Chinese "OEM mini laptop netbook". It has a 7" screen, a 2 MB memory and claims to run on Windows CE 6.0.My problem is that after successfully connecting via WiFi to my "Orange Livebox" modem and router for a few days, I then lost that connection and can connect now only by cable.When I turn on WiFi power, it recognizes the "Livebox", but then states that it is not receiving any signal and the connection fails. How to restore WiFi.
View 1 Replies
View Related
Mar 5, 2012
after few years without problem with wifi connection at my home, four month ago began wifi lost connection.
4 iphone with assigned ip address;
3 Portable PC (2 with dhcp and N band, 1 with assigned ip with G band)
Router is not too far from wifi equipment
the wifi is protected with WPA-PSK
Often during day, on pc and iphone we have lost connection, we can see in settting the SSID of my wifi lan, but if we try to connect recive message:Unable to connect to casa(casa is my ssid), on router the wifi led is green fix (not blinking) and only after a few minutes or many try wifi return aviable (for all equipments at the same time and the wifi led blinking)If I want quick connection, without attempt, i simply power off router and after power on, the wifi connection begin aviable!
1. changed SSID, very different from other SSID of my neighbors;
2. changed class of ip address (from 192.168.x.x. to 10.16.x.x);
3. wifi with no protection;
4. tried with & without mac address filter;
5. tried with only 1 wifi connection.
View 3 Replies
View Related
Dec 26, 2012
I have a wire ADSL connection and I use ADSL WiFi enabled router for distribute my internet connection with in my other devices (on my home network). When I downloading large files (more than 30MB) over the internet using my WiFi connection, my connection drop several times. However if I exchange large files within my WiFi network (with in home network via WiFi), my WiFi connection not drop (I can exchange 6GB files without any issue). Why is that? Is it my router issue or my ADSL connection issue? Most of the time after I lost internet connection, i can see my WiFi connectivity standby, it's not disconnect. However some time it completely disconnect. After I lost the connection (standby or completely disconnected) it again automatically connect.
I face this issue if i download large files on the internet, via the WiFi, if i download large files on internet using Ethernet cable, my connection not drop, it's stable. I use default wireless settings on my router? I use open WiFi connection.
View 2 Replies
View Related
Aug 18, 2012
I'm having issue with wireless connection on Belkin router F5D7633-4.Every 1-2 days my router disconnect and reconnect for no apparent reasons. When this happens, it affects it's wifi. All the devices in my house couldn't connect via wireless to this router. The only way to get these devices connected is to manually reboot the router.Do you know how to allow the router to allow many devices connected at same time?
View 2 Replies
View Related
Jul 20, 2011
My router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
View 2 Replies
View Related
Apr 29, 2012
My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
I have a Mac laptop. Verizon ISP.
View 2 Replies
View Related
Apr 30, 2012
I bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
View 2 Replies
View Related
Jan 17, 2012
Can I use a router to wifi from my laptop to printer without internet connection?
View 1 Replies
View Related
Jan 19, 2013
I have been successfully printing to my HP 8250 printer USB connected to my e4200 router for nearly a year from my xp ethernet pc and 2 windows 7 wireless laptops. Today nothing could print to it and when I deleted and tried to reinstall using cisco connect it tells me I am trying to connect an unsupported device both on ethernet XP PC and wireless windows 7 laptop. I have installed no new software or drivers this year. I have had to regress to attaching the printer back to the XP PC and sharing it which obviously means the PC now needs to be switched on to print.
View 4 Replies
View Related
Nov 22, 2011
i have lost my sky wifi security password and i was wondering if i can get an instant reply and talk to a person and not a computer about how i can get my wifi password.On the router ther is a sticker with all these codes on it and none of them seem to work at all when i type them in on my other laptops and computers
View 1 Replies
View Related
Sep 2, 2012
I've lost wifi router password. how can i find it?
View 1 Replies
View Related
Aug 24, 2011
Is there any place I can download it so I can use my wi-fi again withot buying the installation CD?
View 2 Replies
View Related
Dec 15, 2011
My HP laptop connects to the router via wifi always. However page loading is very slow. The google home page can take 30-40 seconds. The other laptop we have works fine. If I connect the HP laptop to the router using a cable it runs very quickly always. I have nortons security installed on the HP laptop.I ran ipconfig/all. I pinged the router default gateway address and got back 192.168.0.1. This worked. I then opened a browser and tried to load a page. It was slow to load.I ran ipconfig/all again. The default gateway address had changed. When I pinged the original default gateway address it was losing 1-2 packets and the other packets were very slow. It seems like the router or wifi is losing packets and the default gateway address keeps changing.
I turned off the wifi and used a cable to the router. I ran ipconfig/all. I pinged the router default gateway address and got back 192.168.0.1. I did this several times and the same address came back. Unlike the wifi example above nothing was changing.It must be this laptop's settings as our two smartphones connect to the wifi router and the other laptop as well and speed is not an issue.
View 1 Replies
View Related
Aug 31, 2011
i have problem with internet notconnected router
View 1 Replies
View Related
Nov 3, 2012
i have lost my code from the tenda wifi router modem which we can use to put security.without it how to secure wifi?
View 1 Replies
View Related
Dec 4, 2012
I just installed a Netgear WiFi extender. In order to set all the preferences, it wants a password and login and I have no idea what that is. I tried everything I could think of, but no go. how to reset the pw and figure out what my login is? Have had no response that addresses this problem. I am using Win 7 and I have an ARRIS cable modem. I've already gone thru the users guide with a fine tooth comb and have found nothing. I have been using WiFi on Netgear equipment for years, so it's not a new network. I also tried the login=admin and password=password and that didn't work.
View 3 Replies
View Related
Feb 1, 2013
Region : Sweden
Model : TL-MR3420
Hardware Version : V1
Firmware Version : TL-MR3420_V1_121123
ISP : Tre
I have owned the TL-MR3420 for about six months and never had any problems with it, 3G connection stable enough and wifi and LAN worked properly without any drops.About one week ago I started experiencing problems. Both wifi and LAN gets disabled and I need to pull the plug and do a hard reset to correct the issue. This only happens after some heavy use, many devices is connected to Wifi, streaming files over the WIfi and so on. A scenario may be the following; there are six devices back home using all using wifi. All of them are not connected at the same time, but four may be; usually three computers and one tablet. The HTPC may do some heavy videostreaming from another computer. When the streaming is over, some devices are shut down then I may lose the WIFI and LAN ability of the router.
I have tried connecting with cable after wifi were lost but no IP address where given to it and connection where refused. This means I have no possibility to access the log file in the router, and after reboot the log file is reset. Router settings is pretty much default.Is my device broken or is there any setting I may tweak with?I have updated to latest firmware and tried to change channel without success.
View 3 Replies
View Related
Jun 30, 2012
Over the past few days I've been having a problem with my internet connection.
I connect to my home wifi network and will have excellent signal strength, but after about 20 minutes or so, I will lose internet access, but will stay connected to my wifi network. If I join my neighbor's wifi network I will have the same issue.I will connect to a network, and while still connected, I will suddenly lose internet access (signal strength will remain the same). Switching networks doesn't correct the problem.
When I lose internet, I can disconnect from the network and reconnect mere seconds later and will have the internet access back again.I have reset the modem/router and my computer numerous times but the problem does not go away.
View 3 Replies
View Related
Mar 20, 2011
Ok i have a dell inspiron m5030 running windows 7. The wifi card that came with it is the atheros 9285. It was working then out of know where i logged off and logged back in when i changed classes and it doesnt work anymore. In the device manager it says it is installed but cannot start.
(Before this I was able to connect with wifi almost instantly without a problem.)
View 19 Replies
View Related
May 21, 2012
When I ran a reset to factory settings of my acer aspire one netbooks which runs windows 7 I no longer have a wireless connection option at all. I have done this before and never lost my ability to connect wirelessly. I tried to look for driver downloads but I'm not even sure what it is I need to do to recover the missing program as it was a original factory program.
View 4 Replies
View Related
Mar 1, 2013
Region : Germany
Model : TL-WDR4300
Hardware Version : V1
Firmware Version : newest
ISP : CS
the router lost Wifi signal 5-10 times per day.Router and devices are in the same room. max 4 meters.
View 1 Replies
View Related
Apr 20, 2013
Last Sunday, I put lots of music files into usb storage, a external harddrive linked to EA4500. which is WD element 3T.Last Wednesday, I re-organize file folders. And then yesterday(Friday), I found all my files were lost.
View 1 Replies
View Related
Jun 30, 2011
We have the Linksys WRT150N router. A while ago it suddenly lost the name we gave it when we set it up and now it shows up as Linksys. Also, it is no longer secure, and sometimes we can't even see our network - it isn't even listed. How do I go in and change this? Will I have to reset the wireless information on my printer, etc?
View 4 Replies
View Related
Apr 15, 2013
For some strange reason I was looking at my router and wanted to check and see if there were any firmware upgrades available. I was not having any issues. I noticed that there was an upgrade and one of the notes indicated that it fixed some speed issues. I saved my config before upgrading and reloaded config after upgrading the firmware.Since the upgrade, I have lost connectivity to my printer and have intermittent issues with my remote dvr.The printer is connected wirelessly thru a wet610n.The dvr is connected wirelessly thru a wet610n.I can ping the printer, and I can access the printers web page. The issues appears to be two-way communication.The printer is an HP Officejet 6500a and allows eprint. The printer can no longer contact the eprint server.I have turned off my firewall on my computer and still cannot pring (why would I have to change this anyway, it worked before.)I use a ddns server for software access to my dvr. It worked flawlessly before.Now, the dvr is visible sometimes and sometimes it's not.
My wrt610n is v2 hardware.I called for support, but of course since the warranty has ended, support has ended unless you pay.Nothing like a firmware fix to break your router.I am very disappointed with the upgrade and the support provided.
View 2 Replies
View Related
Dec 16, 2011
Been using an Epson Artisan 800 for years over a long USB cable. Love the thing to pieces, until it broke printing on it's 800th CD or so. Replaced with an Epson Artisan 835 and wanted to it set it up WiFi this time (new office layout doesn't lend well to a USB cable).But I can't see the damn thing on the network! And I don't think it's the printer's fault either, since it's the second one I've tried.Printer says it's connected to the router. Shows full signal strength on front panel. All network connection tests available on the printer's touch screen pass quickly:SSID checkCommunication Mode checkSecurity Mode checkMAC Address Filtering checkSecurity Key/Password checkIP Address checkDetailed IP Setup checkBut my Win 7 box can't see the printer!Running the Epson connection wizard on my Win 7 box failed, so I assigned both static IPs in the router's DHCP panel (192.168.1.101 and .105). The printer's network test page shows the IP stuck. Power cycled both printer and router twice each. No dice. IPconfig shows that the PC's IP stuck too.
View 12 Replies
View Related
Dec 2, 2011
I updated the fimware on my WRT160N v3 and followed it up with a reset of the router. I then restored the router settings that I had saved. All the settings appeared to be good, but none of my wireless devices would connect. I reneted the pass phrases (WPA2) but still nothing. Tried to change the passphrase, still no good. I then did a factory reset of the router from the setiings page and manually re-entered and save the settings, again nothing. All of my devices are able to "see" the network and the correct SSID.
View 9 Replies
View Related
Jul 15, 2011
to play Xbox Live and use my computer at the same time and all of a sudden my connection would be lost. I eventually figured out that my laptops Wireless connection being lost was completely to blame on my Wired Xbox connecting to the internet.
View 1 Replies
View Related
Oct 1, 2011
I'm not working on a computer now. This is just a question of curiosity since I am still learning networking. I did a reinstall for someone. Once they brought their computer back home their Verizon DSL connection was not working. He could not Ping Google.com.
View 2 Replies
View Related
Jun 27, 2011
I had lost power to my apartment and when everything came back on everything was working as normal...until about an hour later when my internet connection was sporadic at best. I called the ISP and they confirmed that the modem is fine. My other computers can connect to it via ethernet cable and wifi so it doesn't appear to be the router.
When I try to ping anything it seems to time out randomly.. (ran "ping Yahoo! -t1" and let it go for a while..times out every 10 requests or so).
I swapped out the ethernet cable but the LEDs on the NIC are Orange(Amber) for both cables. The wifi on the computer works fine. I reinstalled the driver for the NIC.
Computer:
Lenovo H320
Windows 7 64-bit
View 12 Replies
View Related
Jul 17, 2011
I don't know how to go about this but basically i have a cable modem connected to a router which then connects to my 3 pc's. (file/printer network sharing and stuff setup via the built in windows wizard). and i have a printer plugged into one of the pc's. (all using windows xp)they can all use the printer just fine.i got this NEW pc(windows 7), which is not physically connected to this router. instead, i set up a wireless connection to it. (a wired connection is not possible)internet access also works fine.BUT, i just realized that i think file/printer sharing it cannot do. i think it's because even though it can use the same internet it's on it's own wireless network and not the wired one. so i guess they can't communicate with each other? so i'm wondering. how can i get the wifi pc to talk to the non-wireless printer
View 4 Replies
View Related
