Lost Wifi When Ran Factory Default Reset On Acer Aspire One Netbook

May 21, 2012

When I ran a reset to factory settings of my acer aspire one netbooks which runs windows 7 I no longer have a wireless connection option at all. I have done this before and never lost my ability to connect wirelessly. I tried to look for driver downloads but I'm not even sure what it is I need to do to recover the missing program as it was a original factory program.

View 4 Replies


ADVERTISEMENT

Acer Aspire Netbook Cannot See Wifi Network?

Apr 11, 2011

earlier this year I bought an Acer AspireOne netbook with Windows 7 startup operating system. It's been working fine until recently when it suddenly does not see our home wifi connection. It shows a list of all our neighbours routers, just not ours. We have various other devices that can see and connect to it just fine (other PCs & laptops, iPhones & smartphones, MacBook Pro etc) A system restore cured the problem the first couple of times, but now that doesn't work. I've tried resetting & restarting the modem & router dozens of times but it does not appear in the list of available networks for the netbook.

View 6 Replies View Related

Acer Aspire One AOA150 ZG5 Netbook - Limited Or No Connectivity Error

Sep 24, 2011

I just got a used Acer AspireOne AOA150 ZG5 Netbook and upon bringing it home, I received a "Limited or No Connectivity" error when attempting to use the internet via wireless. I have another laptop that connects at the same time with no issues. The Netbook DOES work if I hardwire into my home router. I have since taken the Netbook to work and it connects to the wireless there with no issues. So it seems to be an issue specifically with my home router/modem and this Netbook.So far I have flushed my DNS cache, done the Winsock and reset my TCP/IP, removed wireless profiles, and tried the Repair function.None of that has worked. My wireless properties are also set to automatically obtain the IP address.I'm on XP SP3 and it seems like a lot of folks think that it's a SP3 issue, but I don't think so in my case since the wireless is fine in other locations. [code]

View 13 Replies View Related

Acer Aspire One Netbook - No Access To Home Wireless Network

Apr 29, 2011

This issue concerns our Acer Aspire1 Netbook. It just suddenly will not let us access our home wireless network. When I followed previous advice by unchecking the IEEE 802.1x box, I received the "40 bit or 104 bit" warning box and upon checking found that the 802.1x box had automatically been rechecked. Needless to say, we still can't access the wireless network.

View 1 Replies View Related

Acer Desktop Aspire AM3100 / Memory Upgrade Network Lost

Apr 4, 2011

I have an Acer Desktop Aspire AM3100 running Windows 7 Ultimate. I upgraded my memory. When I turned the PC back on I had lost my whole home network and cannot get internet acces back. I have checked my modem by direct connecting it to my laptop. I have checked my linksys box by doing the same. I can see the linksys on my laptop but cannot access the internet. On my desktop I get nothing?The home network and internet access all disappeared when I upgraded memory.

View 2 Replies View Related

Reset DLink Modem To Factory Default?

Jan 2, 2013

I need to reset my DLink wireless modem all over again, can't get it to recognise the router, so thought that it would need to reset to factory defaut, how can I do this. Tried just hitting reset on the router,but nothing is happening.

View 4 Replies View Related

Cisco WAN :: 1800 - Factory Default Reset?

Sep 24, 2012

My team already bought one 1800 Series router. And they setted some passwor.
 
Right now i am not able to login. I know the cisco password recovery method to reset the password.
 
Instead of password recovery method i want to try with total factory default setting.
 
is there is any method to do factory default without login

View 5 Replies View Related

Cisco WAN :: AIR-AP521G-E-K9 / Reset To Factory Default In CLI

Jan 22, 2012

I have an AIR-AP521G-E-K9 and i want to reset to factory default in CLI.I tried "write erase" but dont work.I have problems with access-list and i want to desactivate access-list that i have created by web GUI.The problems now is that i can not access to my AP, no ping, no web GUI access.Access that i have is only by CLI, but access list is always blockinh all tha traffic trought my AP.How can i desactivate mac filtering, or how can i reset to factiry default

View 1 Replies View Related

Cisco Wireless :: Factory-Default Reset For AP3600?

Dec 17, 2012

How to reset a CAPWAP AP3600 to factory default using the AP's CLI and not the controller.

View 2 Replies View Related

Cisco Routers :: WRV210-A V01 Reset To Factory Default?

Oct 30, 2011

I have a WRV210-A V01 (Software: 2.0.1.5) router that when originally purchased I upgraded the firmware to the newest 2.0.1.5. However after the firmware upgrade the router has not worked right since. [I thought maybe the upgrade did not take, and successfully pushed the firmware 3x times]
 
Everytime you login to the webpage the right-side pane you have to scroll down 3x pages until you can see the settings options. It does that for everypage you visit you have to scroll down 3x pages until you can see the settings.
 
The wireless is sporadic and dropping connections, and now certain options like changing the "Basic Rate:" from "All' to "Default" does nothing and wont let you change it.
 
The main issue I have is that certain wireless settings like changing the "AP Isolation:" cause the router to reset back to factory defaults. and even trying to configure the LAN setup also randomly makes the router reset to factory default.

View 1 Replies View Related

Cisco Switches :: ESW 540 / How To Reset Switch To Factory Default

Jun 1, 2011

Unable to log in into our new ESW 540 switch because the default User ID and PW was changed.  How do i restore the factory default on the switch.Can't get into the switch with CCA or explorer.

View 1 Replies View Related

Cisco Firewall :: PIX 515E Reset To Factory Default?

Jul 3, 2011

Im connecting to my firewall through the console port, and need to know how to reset it to factory defaults. I have looked around online and can not see any reference on how to do this.

View 11 Replies View Related

Cisco Firewall :: Cannot Reset 5505 To Factory Default

Apr 10, 2011

i have a new 5505 and i have done a few configurations on it. When i try to reset it to the factory settings via asdm i get an error saying it could not be done. I have used config-factory-default using the cli option available in the asdm. I am using asa 8.2 and asdm 6.2. Will erasing the flash reset to factory defaults.

View 4 Replies View Related

Acer Netbook Wifi Won't Work At All

Oct 4, 2012

My accer netbook would not connect to wifi at all, it is working when connected to the router. the wifi signal light is not on like it usally is. I restarted it a number of times like i usually do when this happens but this time it won't come back on

View 1 Replies View Related

Linksys Access Point :: Wap54g / How To Reset To Factory Default

Jan 24, 2013

I reset unplug did everything according from cisco.com it didn't work.Can not go to 192.168.1.245. What next I need to do to make it work.

View 3 Replies View Related

Linksys Wireless Router :: Wrt54gl Won't Reset To Factory Default

Jul 25, 2012

i have a wrt54gl version1.1 ok so let me start from the beginning.a few months ago i left the contry so a friend of mine asked me to lent him my router. a few day`s ago i got back and got my router back. it was working fine until i got it back. the rest button won`t work. i can`t reset the router to factory default. the user name was blank and the password was admin.now it won`t let my to do that.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Reset To Factory Default

Nov 26, 2012

Due to password loss, I get to reset the E4200 to factory default in order for router re-config.After pressing the reset buttom for 10sec, the router reset.  After then, I could not access the router via browser with 192.168.1.1 at URL entry.  My PC IPv4 setup: 192.168.1.11; subnet=255.255.255.0.But, ping 192.168.1.1 from PC was OK without packet loss.  So router was restored with 192.168.1.1 and cable connection was OK.

View 2 Replies View Related

Cisco Wireless :: Reset Aironet 1231 To Factory Default?

Sep 17, 2012

I have a (old) 1231 that I would like to reuse, but no one remembers the password.  how to recover a password from this model AP or how to reset the device to factory default?

View 1 Replies View Related

Cisco :: Aironet 1300 Series Reset To Factory Default

Aug 16, 2011

I have a cisco aironet 1300 series and i need to reset it back to factory default.  the directions say push the mode button while the access point is off and then turn it on while the mode button is down.

View 1 Replies View Related

Cisco Routers :: RVS4000 Necessary To Reset To Factory Default Settings

Feb 15, 2009

Recently purchased a RVS4000 Router, which included v1.1.14 firmware. Is it necessary to reset the router to Factory Default settings, after upgrading to v1.2.11, as in most of the other previous upgrades?

View 37 Replies View Related

Cisco Firewall :: ASA 5505 Doesn't Reset To Factory Default?

Jun 20, 2011

Why when I try to reset Cisco ASA 5505 by pressing  the button behind the hardware nothing happen? Just via software I can reset it?
 
I bought the hardware an year ago and I've never used, the problem that I don't have the blue cable and via software connecting to PC doesn't work.

View 6 Replies View Related

Cisco Switching/Routing :: How To Reset 2960 To Factory Default

May 31, 2012

I have a cisco 2960 that I seemed to have lost the password. Its just a test switch. I would like to know how to reset it to factory default. I have managed to get to a switch: prompt by holding in the small mode button on the front of the switch and pluging in the power but lost from here.

View 1 Replies View Related

Acer 6930 - Lost Internet Access After Reset?

Nov 23, 2012

After reset to factory settings of my Acer 6930 I have lost my internet access.Tried wi-fi and ethernet but neither find my router.

View 6 Replies View Related

Cisco Wireless :: AIR-AP1142N-A-K9 Set To Factory Default But Enable Password Not Reset

Jan 17, 2012

I was trying to  do a password recovery on a 1142 AP  but  enable password did not reset  and I am stuck 
 
AP model is   AIR-AP1142N-A-K9
Running IOS  c1140-k9w7-mx.124-21a.JA1
 
Its autonomous so there is no controller.  I renamed the config.txt file I am unable to rename or delete the  private-config file. I get the message that file or directory cannot be found when i try to rename and permission denied when I try to  delete it.

View 12 Replies View Related

Cisco Wireless :: AIR-LAP1142N-E-K9 / Reset To Factory Default Doesn't Work On 1142 AP

Jul 5, 2010

We have an AIR-LAP1142N-E-K9  deployed in a H-REAP setup.This AP already got the configuration from the WLC when it was deployed at a remote site.Now we moved it to another site, but it doesn't appear in the WCS and i don't see any CAPWAP debug messages on the WLC.The routing work fine between the AP and the WLC, the AP also gets an IP address from DHCP and also received Option 43 information.
 
Now my guess was that the AP doesn't associate with the WLC because it has the old config file and it runs in local mode(without trying to connect to the WLC).We want to reset to factory defaults because we want to delete the configuration and force the AP to get a new config from the WCS.I don't know the enable password so i had to use other methods for reseting to factory defaults.
 
I tried to use the information from here:[URL]I used the "MODE button":I get the following message from the console:

"button pressed for 5 seconds
process_config_recovery: set IP address and config to default 10.0.0.1"

View 24 Replies View Related

Cisco Wireless :: Reset 1522 Series Lightweight Access Point To Factory Default?

Jan 13, 2013

I am trying to reset my 1522 series lightweight access point to factory default.On the box,there is no any mode button.Actually password is not set to Default and need pasword recovery on this device.If you have any experience on this lightweight access point that let me know.How I reset device to fectory default.

View 1 Replies View Related

Acer Aspire One Won't Connect To Wifi

Aug 13, 2012

My family recently purchased an Acer Aspire One netbook running Windows 7. Unfortunately, once I got it out of the box and tried to connect to the internet, I had some problems.My family predominantly uses Apple devices - in fact, this netbook is the only PC that we have in the house. All of our Apple devices work wonderfully with our current Wi-Fi connection (iPhone, iPad, MacBooks, etc).The Acer is able to detect our wireless, and it even says that it's "connected" with excellent signal strength. However, it says it is an "Unidentified Network" with "no internet access." To see if this problem limited to just that wi-fi connection, I hooked up my Verizon Wireless Mi-Fi and it worked just fine with the Acer.

View 19 Replies View Related

Wifi Drivers For Acer Aspire Zg5?

Apr 28, 2012

Want to get drivers or acer aspire onezg5

View 3 Replies View Related

Acer Aspire 5741-a Not Connecting To Wifi

Apr 27, 2011

Having a problem connecting with my home wifi through this laptop but when using other computers/laptops in within the home they seem to connect fine. it was working fine last night and then when i switched on today it stopped working. the wifi seems to be showing all the networks around the vicinity, but no connection. i ran ipconfig and it seems to state that my 'media is disconnected'

View 14 Replies View Related

Where Is The Wifi Button On Acer Aspire C675

Oct 16, 2012

I cannot get online with my other laptop which is acer aspire c675.

View 1 Replies View Related

Slow Wifi On Acer Aspire One D257

Nov 15, 2011

In the last few weeks my wireless has been crap and it's been quite slow, making some pages take forever to load or stuck in a constant loading cycle. Im on a Acer Aspire One D257-13448 netbook with built in Intel Centrino N-100 wireless adapter.

I've tries a lot of things already, resetting my Bell 2Wire modem outer, disabling and re-enabling my wifi, chaning the wireless network name and password, and even chaning the power settings for maximum wireless performance. Though I have noticed a little increase in speed with the last action, its still slower then it was when I first got my netbook back in september. I know the network is fine because my two computer connected by wires work just fine.

Im running Windows 7 Professional SP1.

View 1 Replies View Related

Wifi Not Working On Acer Aspire V3-571 Windows 7?

Oct 27, 2012

Cannot connect to wireless network, I've updated drivers, reset switches and tried any

View 3 Replies View Related

Wifi Driver For Acer Aspire 5745?

Mar 9, 2013

send me link where i can download dat software ....wifi driver for acer aspire 5745

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved