Cisco Routers :: WRV210-A V01 Reset To Factory Default?

Oct 30, 2011

I have a WRV210-A V01 (Software: 2.0.1.5) router that when originally purchased I upgraded the firmware to the newest 2.0.1.5. However after the firmware upgrade the router has not worked right since. [I thought maybe the upgrade did not take, and successfully pushed the firmware 3x times]
 
Everytime you login to the webpage the right-side pane you have to scroll down 3x pages until you can see the settings options. It does that for everypage you visit you have to scroll down 3x pages until you can see the settings.
 
The wireless is sporadic and dropping connections, and now certain options like changing the "Basic Rate:" from "All' to "Default" does nothing and wont let you change it.
 
The main issue I have is that certain wireless settings like changing the "AP Isolation:" cause the router to reset back to factory defaults. and even trying to configure the LAN setup also randomly makes the router reset to factory default.

View 1 Replies


ADVERTISEMENT

Cisco Routers :: RVS4000 Necessary To Reset To Factory Default Settings

Feb 15, 2009

Recently purchased a RVS4000 Router, which included v1.1.14 firmware. Is it necessary to reset the router to Factory Default settings, after upgrading to v1.2.11, as in most of the other previous upgrades?

View 37 Replies View Related

Cisco Routers :: WRV210 Resets To Factory Defaults?

Sep 23, 2010

I purchased a WRV210. I configure the device, setup all my tunnels, WAN, LAN, Wirelss, Security, etc. and within 48 hours it "automatically" resets itself back to "out of the box" settings. This has happened twice now - once after it ran for about 4 days and the second time after only 5 or so hours of opperation.
 
Is this a known issue with the device? Is there an update I need to apply? I'd give ya my current FW version but I cannot login as it appears to have rest once again lol - and my tunnels are down so no remote access.
 
I made a backup of the config after the first unscheduled reset - (.bin file) so I have my settings ready to restore.

View 6 Replies View Related

Cisco WAN :: 1800 - Factory Default Reset?

Sep 24, 2012

My team already bought one 1800 Series router. And they setted some passwor.
 
Right now i am not able to login. I know the cisco password recovery method to reset the password.
 
Instead of password recovery method i want to try with total factory default setting.
 
is there is any method to do factory default without login

View 5 Replies View Related

Cisco WAN :: AIR-AP521G-E-K9 / Reset To Factory Default In CLI

Jan 22, 2012

I have an AIR-AP521G-E-K9 and i want to reset to factory default in CLI.I tried "write erase" but dont work.I have problems with access-list and i want to desactivate access-list that i have created by web GUI.The problems now is that i can not access to my AP, no ping, no web GUI access.Access that i have is only by CLI, but access list is always blockinh all tha traffic trought my AP.How can i desactivate mac filtering, or how can i reset to factiry default

View 1 Replies View Related

Reset DLink Modem To Factory Default?

Jan 2, 2013

I need to reset my DLink wireless modem all over again, can't get it to recognise the router, so thought that it would need to reset to factory defaut, how can I do this. Tried just hitting reset on the router,but nothing is happening.

View 4 Replies View Related

Cisco Wireless :: Factory-Default Reset For AP3600?

Dec 17, 2012

How to reset a CAPWAP AP3600 to factory default using the AP's CLI and not the controller.

View 2 Replies View Related

Cisco Switches :: ESW 540 / How To Reset Switch To Factory Default

Jun 1, 2011

Unable to log in into our new ESW 540 switch because the default User ID and PW was changed.  How do i restore the factory default on the switch.Can't get into the switch with CCA or explorer.

View 1 Replies View Related

Cisco Firewall :: PIX 515E Reset To Factory Default?

Jul 3, 2011

Im connecting to my firewall through the console port, and need to know how to reset it to factory defaults. I have looked around online and can not see any reference on how to do this.

View 11 Replies View Related

Cisco Firewall :: Cannot Reset 5505 To Factory Default

Apr 10, 2011

i have a new 5505 and i have done a few configurations on it. When i try to reset it to the factory settings via asdm i get an error saying it could not be done. I have used config-factory-default using the cli option available in the asdm. I am using asa 8.2 and asdm 6.2. Will erasing the flash reset to factory defaults.

View 4 Replies View Related

Cisco Wireless :: Reset Aironet 1231 To Factory Default?

Sep 17, 2012

I have a (old) 1231 that I would like to reuse, but no one remembers the password.  how to recover a password from this model AP or how to reset the device to factory default?

View 1 Replies View Related

Cisco :: Aironet 1300 Series Reset To Factory Default

Aug 16, 2011

I have a cisco aironet 1300 series and i need to reset it back to factory default.  the directions say push the mode button while the access point is off and then turn it on while the mode button is down.

View 1 Replies View Related

Cisco Firewall :: ASA 5505 Doesn't Reset To Factory Default?

Jun 20, 2011

Why when I try to reset Cisco ASA 5505 by pressing  the button behind the hardware nothing happen? Just via software I can reset it?
 
I bought the hardware an year ago and I've never used, the problem that I don't have the blue cable and via software connecting to PC doesn't work.

View 6 Replies View Related

Cisco Switching/Routing :: How To Reset 2960 To Factory Default

May 31, 2012

I have a cisco 2960 that I seemed to have lost the password. Its just a test switch. I would like to know how to reset it to factory default. I have managed to get to a switch: prompt by holding in the small mode button on the front of the switch and pluging in the power but lost from here.

View 1 Replies View Related

Linksys Access Point :: Wap54g / How To Reset To Factory Default

Jan 24, 2013

I reset unplug did everything according from cisco.com it didn't work.Can not go to 192.168.1.245. What next I need to do to make it work.

View 3 Replies View Related

Linksys Wireless Router :: Wrt54gl Won't Reset To Factory Default

Jul 25, 2012

i have a wrt54gl version1.1 ok so let me start from the beginning.a few months ago i left the contry so a friend of mine asked me to lent him my router. a few day`s ago i got back and got my router back. it was working fine until i got it back. the rest button won`t work. i can`t reset the router to factory default. the user name was blank and the password was admin.now it won`t let my to do that.

View 9 Replies View Related

Linksys Wireless Router :: E4200 Reset To Factory Default

Nov 26, 2012

Due to password loss, I get to reset the E4200 to factory default in order for router re-config.After pressing the reset buttom for 10sec, the router reset.  After then, I could not access the router via browser with 192.168.1.1 at URL entry.  My PC IPv4 setup: 192.168.1.11; subnet=255.255.255.0.But, ping 192.168.1.1 from PC was OK without packet loss.  So router was restored with 192.168.1.1 and cable connection was OK.

View 2 Replies View Related

Cisco Wireless :: AIR-AP1142N-A-K9 Set To Factory Default But Enable Password Not Reset

Jan 17, 2012

I was trying to  do a password recovery on a 1142 AP  but  enable password did not reset  and I am stuck 
 
AP model is   AIR-AP1142N-A-K9
Running IOS  c1140-k9w7-mx.124-21a.JA1
 
Its autonomous so there is no controller.  I renamed the config.txt file I am unable to rename or delete the  private-config file. I get the message that file or directory cannot be found when i try to rename and permission denied when I try to  delete it.

View 12 Replies View Related

Lost Wifi When Ran Factory Default Reset On Acer Aspire One Netbook

May 21, 2012

When I ran a reset to factory settings of my acer aspire one netbooks which runs windows 7 I no longer have a wireless connection option at all. I have done this before and never lost my ability to connect wirelessly. I tried to look for driver downloads but I'm not even sure what it is I need to do to recover the missing program as it was a original factory program.

View 4 Replies View Related

Cisco Wireless :: AIR-LAP1142N-E-K9 / Reset To Factory Default Doesn't Work On 1142 AP

Jul 5, 2010

We have an AIR-LAP1142N-E-K9  deployed in a H-REAP setup.This AP already got the configuration from the WLC when it was deployed at a remote site.Now we moved it to another site, but it doesn't appear in the WCS and i don't see any CAPWAP debug messages on the WLC.The routing work fine between the AP and the WLC, the AP also gets an IP address from DHCP and also received Option 43 information.
 
Now my guess was that the AP doesn't associate with the WLC because it has the old config file and it runs in local mode(without trying to connect to the WLC).We want to reset to factory defaults because we want to delete the configuration and force the AP to get a new config from the WCS.I don't know the enable password so i had to use other methods for reseting to factory defaults.
 
I tried to use the information from here:[URL]I used the "MODE button":I get the following message from the console:

"button pressed for 5 seconds
process_config_recovery: set IP address and config to default 10.0.0.1"

View 24 Replies View Related

Cisco Wireless :: Reset 1522 Series Lightweight Access Point To Factory Default?

Jan 13, 2013

I am trying to reset my 1522 series lightweight access point to factory default.On the box,there is no any mode button.Actually password is not set to Default and need pasword recovery on this device.If you have any experience on this lightweight access point that let me know.How I reset device to fectory default.

View 1 Replies View Related

Belkin Routers :: N150 How To Factory Reset

Dec 29, 2012

What buttons, in specific order, do i press to reset my router? i used to know how but can no longer find that info

View 2 Replies View Related

Belkin Routers :: 300n Cannot Log Into 192.168.2.1 / Cannot Factory Reset / Seem To Be Stuck

Mar 14, 2013

I upgraded my internet connection through charter and they shipped a new modem. Installed my new modem and my 300n will not connect to it. So in my attempts to figured things out I went it in and set it up as an access point only. I can access the internet on my desktop but there is no wireless signal in the house. Cannot connect to 192.168.2.1 now either. Tried the manual reset to factory defaults with no luck. At this point all I get is the small flashing blue light and the tall skinny light is not on at all.

View 5 Replies View Related

Cisco Routers :: WRVS4400N - Automatic Revert To Factory Default Settings?

Jan 23, 2013

I had something strange happen to my WRVS440N router yesterday. Our network had crashed for some reason. So I attempted to log into the device to see what was wrong and I was surprised to discover that all of the settings including user name and password had reverted back to factory default.
 
1. What are all of the possible scenarios that would cause this to happen?

2.Would disconnecting power in the middle of a boot up sequence cause the router to revert to factory settings?

View 1 Replies View Related

Cisco Firewall :: How To Do Factory Reset ASA-SSM-10

Feb 25, 2013

I forgot the user for management a IPS SSM-10, when i follow the procedure to reset the password for cisco user, i can get into the module, i change the password and every thing is OK, but when i tried to configure y don´t have rights to do anything.
 
if i see the privileges for the user cisco this is the result. [code]

View 4 Replies View Related

Cisco WAN :: IAD 2430 Factory Reset

Aug 18, 2011

I've inherited a IAD2430 router but I don't have the ena passwords nor am I able to do a break and do a password recovery. I'm familiar with the password recovery process and config reg settings but this one has me stumped.

The config register is set to 0x2102 so I see nothing at all when it boots until it's completed and I get the prompt to "Press RETURN to get started!" I get to non priv mode but without the password obviously I'm going nowhere at that point. All the docs I've come across  so far assume you can break out of the boot process or are already in rommon. When I remove the flash: I get no output at all... The IAD has no "reset" button like the CAT switches either..
I don't need the current config, just a reset/format of the NVRAM.

View 2 Replies View Related

Cisco Firewall :: ASA5505 Factory Reset?

Feb 27, 2013

I got a ASA5505 back from a Office. I don`t know the IP Address to connect to the ASA. How can i reset the System to the Factory Settings.

View 1 Replies View Related

Cisco WAN :: 877 Router Factory Reset Woes?

Sep 3, 2012

We've recently changed data line providers and now have some Cisco 877 routers we'd like to reconfigure and use at other sites. Although we own these, they were configured by our old data line providers, I'm having a hard time of resetting them to factory defaults. The simple, hold down the reset button until it restarts does not work.If I press the reset button within 5 seconds of power up to load the default rom image, I get the below:
 
System Bootstrap, Version 12.3(8r)YI4, RELEASE SOFTWARE
Technical Support: [URL]
Copyright (c) 2006 by cisco Systems, Inc.
 C870 series (Board ID: 1-148) platform with 131072 Kbytes of main memory
 Booting flash:c870-advipservicesk9-mz.124-24.T.bin
Error opening: flash:c870-advipservicesk9-mz.124-24.T.bin

[code]....

I assume from this the required bin has either been removed, renamed or overwritten.As soon as the router boots it requires a password and I dont have the password to be able ftp files in and out of it.

View 10 Replies View Related

Cisco AAA/Identity/Nac :: ACS 5.1 Reset To Factory Setting

Dec 10, 2012

i got the ACS 5.1 at work..after migrating the data from 4.1 a lot of data got changed into the 4.1 so I needed to reset my configuration (since i played around with the 5.1)after doing so, I can't access the web page, to start the configuration again tried the administrator-setup but it didn't work,

View 1 Replies View Related

Cisco Infrastructure :: How To Factory Reset 6160

May 29, 2012

I can't figure this out and there isn't much documentation on the subject online. The reset button just resets the device even after holding it for 10+ seconds and there is nothing in the CLI.

View 5 Replies View Related

Cisco WAN :: 1811 - Reset To Factory Defaults

Feb 28, 2012

I successfully pulled it out of the box and already broke it.

What I did to lose my connectivity to it (via IP, console is OK), but I'd like to start from scratch and during my learning/experimentation I will undoubtedly need to do this over and over until I get things right.
 
I've found various guides, none of which look like what I am after. Basically, I want to return this to the condition that it was in when it came out of the box. IOS is version 12.4(6)T11 .

View 2 Replies View Related

Cisco :: Series 800 Factory Default Restore?

Feb 1, 2013

I'm having trouble with an 800 series router. Work has borrowed it to me so i can practice for my icnd2 exam. Only problem is it has a username and password on it. I have been told i can wipe the device and start over. but i cant get in to the user mode or any mode's as i don't have the user name and password. Is there a way of resetting the router back to factory defaults with out logging in to it?

View 2 Replies View Related

Cisco Firewall :: Factory Default On ASA 5520?

Jul 12, 2011

I  have another asa 5520 and it is configured. when i do factory default  every thing  erase. ok. when i enter again it promped for enable  password. and it takes my privious password taht i gave in full  configuration.
 
It generally comes no password . Why enable PW dont erase  ? why factory default holds my previous password  ?

View 7 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved