Linksys Cable / Dsl :: Wag160n Lost Wifi Connection
Mar 5, 2012
after few years without problem with wifi connection at my home, four month ago began wifi lost connection.
4 iphone with assigned ip address;
3 Portable PC (2 with dhcp and N band, 1 with assigned ip with G band)
Router is not too far from wifi equipment
the wifi is protected with WPA-PSK
Often during day, on pc and iphone we have lost connection, we can see in settting the SSID of my wifi lan, but if we try to connect recive message:Unable to connect to casa(casa is my ssid), on router the wifi led is green fix (not blinking) and only after a few minutes or many try wifi return aviable (for all equipments at the same time and the wifi led blinking)If I want quick connection, without attempt, i simply power off router and after power on, the wifi connection begin aviable!
1. changed SSID, very different from other SSID of my neighbors;
2. changed class of ip address (from 192.168.x.x. to 10.16.x.x);
3. wifi with no protection;
4. tried with & without mac address filter;
5. tried with only 1 wifi connection.
View 3 Replies
ADVERTISEMENT
Apr 20, 2011
I cannot connect my HTC Mozrt via wifi on WAG160N, all other devices work. I am using Firmware Version:V1.00.16.
My router settings in brief: Security Used : WPA 2mixed Radio Band : Standard Wide Chanel: 11 Standard Channel: 7 (2.442 ghz) All Advanced wireless settings page set to Auto ( apart from CTS Protection)
HTC have advised me that the phones channels are between 7-11 , i have tried those channels and i still get router connection unsucessfull, even with no protection on the wifi.
I have a feeling i have to set a IP to the device , but with the HTC Mozart I cannot do this. IOs there a way i can connect a device to the router with Auto IP adress? i have tried everything! from firmware updrades.. resetting it .. different channels..
I have my ipod touch and HTC Hero connected to the wrouter so inkow there isnt anything wrong with the router, even if it is years old!
View 2 Replies
View Related
Feb 9, 2011
I replaced my old separate modem and router yesterday for a Linksys WAG160N. Basically , my next door neighbor is paying their ISP a fortune and hardly uses their internet at all. Ive offered for them to share mine (With both of us providing full consent , i'm not doing anything dodgy!) as i have a very big download quota and it would save them some money.
Now the 2 houses are separated by an alley but distance from the router to their computer is about 6m. Strangely , my WAG160N doesn't reach that far as my wireless network doesn't even appear when they in their house on their laptop!So after reading up on wireless bridges / wireless range extenders and all sorts of things i'm now very confused.
Im basically looking for the most cost effective way of extending the signal from my WAG160N , possibly through the use of a second router in my garage) to allow the neighbor to get a good signal. I cannot reposition my modem/router from its current location and also cannot connect a second router using an Ethernet cable , it must be done wireless. So , is there a way i can wireless connect my WAG160N to another wireless router in order to extend my signal for my neighbor to use? I was looking at the Netgear WN2000RPT and the WRT160N as someone else had previous success with using this as a repeater.
View 4 Replies
View Related
Mar 28, 2012
For a few weeks now, my router has been dropping WiFi connections, seemingly at random. When trying to watch BBC iPlayer is terrible, as it keeps dropping every 5 minutes.
Tonight my iPod Touch (iOS5) was connecting okay, while my son's iPod Touches (iOS3 and iOS4) would not. My MacBook Pro would not connect either.
The only to get things working again, is to turn the router off for a few minutes and turn it on again.
I have router wireless settings as follows:
Network Mode: mixed
Radio Band: Wide - 40MHz channel
Wide Channel: 9
Standard Channel: 7 - 2.442GHz
SSID: Disabled
Router Firmware Version:V2.00.20
My wired connection is running well:
Speed DownSpeed Up
15734.10 Kbps ( 15.4 Mbps )1012.05 Kbps ( 1 Mbps )
View 7 Replies
View Related
Nov 2, 2010
Ive bought recently WAG160n and Ive watched that I have problem with slow speed of WiFi. On LAN cable its ok. Internet provider gives my up 20Mb/sec. download and up to 1Mb/ses. upload. Ive visited
[code]....
I add, that my previous router: WAG200G on this same line gives me 14-16 Mb/sec. download on WiFi. Why upload speed is ok, but download not?
View 9 Replies
View Related
Dec 19, 2012
I have a WAG160N that I've used as a wireless router for ages. I have changed broadband providers and as they have supplied a new router I decided to use that and connect the old WAG160N via a Home Plug AV network and effectively use it as a range extender.
I have read some of the other forum posts and made the following changes:
1) Set up internet as Bridge mode
2) Set DCHP server as relay
When I connect via an ether net cable it works brilliantly but as soon as I try to connect wireless I can't talk to the internet.
View 8 Replies
View Related
Dec 11, 2011
I got a spare WAG160N lying around which I want to test to see if I can get a better range with it than my current router.My internet is connected via a cable modem which I connect to the ethernet port 1 on the WAG160N - which in my experience with other wireless routers - will work and broadcasts internet through wifi. However I can't seem to get it to work.After doing a bit of searching I found that some people say this isn't possible on the WAG160N while others say it's possible if I switch the port 1 to "Use as WAN port" in the ethernet setting tab page (Tried it, still doesn't work). I can obviously connect to the router setting page but no internet is flowing through (And the internet LED does not light up)
What settings do I need to use to make this work or is it indeed impossible? It's in bridge mode only at the moment with other settings untouched from factory defaults.One person says it's possible but I can only get it to work with 1 device because it's assigning the public IP on the cable modem onto the one device - but I couldn't get this to work either.
View 3 Replies
View Related
May 30, 2011
Is it possible to use a WAG160N as a straight forward router (wired & wireless) and to "switch off" the ADSL connection? I have a cable modem and planned to connect the modem to WAG160N by an ethernet cable and then assumed that it would connect to the rest of my network and use the modem as the route to the internet. But I cannot work out how to configure it to get this internet connection.
View 1 Replies
View Related
Sep 16, 2011
I have just upgraded my old WAG54GS to WAG160N-E1 (Annex B). I've configured the PPPoE connection and everything was up and running... for about an hour. Then the router started dropping internet connection on pretty much regular basis (every 40-50min?) - it then takes 1-2 min until it reconnects again... Obviously that makes any online gaming a nightmare.
I'm now running again on the WAG54GS and everything is ok (except it doesn't support >6Mbps speed which is the reason I upgraded the router in the first place) so it's not an issue with the ADSL line.
View 1 Replies
View Related
Nov 9, 2010
I have a WAG160N v2 and a UK Online broadbad account, windows xp. The connection intermittmently drops out, approx 15-30 times per day. I have spoken to my ISP and had the line checked (no packet loss issue), checked the settings on the router against my ISP and also updated the router firmware all with no improvement.
View 2 Replies
View Related
Oct 6, 2009
WAG160N gateway and wireless dropouts. Wireless connectivity to file and printer shares will fail after an unspecified duration of time.Internet access may also drop. Repairing the wireless connection does not appear to work. Saving the gateway settings without making changes appears to temporarily fix this issue (some users have reported this does not work). Manually performing a power cycle of the gateway will temporarily fix this issue.
View 9 Replies
View Related
Sep 29, 2011
I have a new iPad and a new WAG160N. I've wasted many hours trying to get them to recognize each other, with no success.I can connect to the Internet OK but I can't get a connection to the Pad, as it won't accept my password. I can't find a solution here that I can follow for this model.Why won't my password (no unusual symbols, just 10 letters and numbers) be accepted?
View 9 Replies
View Related
Oct 16, 2011
I have a WAG160N with firmware V1.00.16 (version 1 device).The router is connected via ethernet to my main iMac running Lion 10.7.2, although the issue's I'm having have occurred for some time before upgrading to Lion or its's latest update.Firstly, devices I connect to the router wirelessly such as my iPad and iPhone will allow me to use the internet on said devices for about ten minute then the internet will simply stop. The device is shown as connected (checking the wifi settings on iPad etc show the router is still seen). If I switch WI-FI off on the device, then back on, internet is restored. It's not an internet provider issue as I can use the net all day on my ethernet-connected iMac without a problem.My printer is connected to my iMac via USB and shared with other devices. It is seen on my Macbook which connects wirelessly via the router. If I try to print from the macbook, the print job will not progress until I re-start the router. Likewise, there are applications that I sync between my ipad and iMac via iTunes with my mac connected via the USB cable. The iPad will not bee seen by the iMac unless I re-start the router. My Apple TV will only sync wirelessly with the iMac if I re-start the router.
View 1 Replies
View Related
Sep 28, 2012
I've bought a "WAG160N v1.0 Annex A" almost 2 years ago. I never used it's wireless feature untill we moved our house. Now it's like 4 month I'm using its wifi feature and I've got to admit I'm really frustrated by its functionality!
For months the modem just dropped wireless connection constantly in various time periods. Somtimes it went like 2 days without any problem but some other times I had to change channel every 15 minutes for it to get back working. And yes it didn't get fix until I changed the channel, otherwise clients had to wait several hours for a 50/50 chance of reconnection. Now It's two days the changing channel trick no longer works. I tried all channels and even put my notebook next to the modem but no luck. The notebook sometimes connnects to the access point but disconnects after a few seconds. Somtimes it doesnt even detect the SSID of my WAG160N modem. Some friends suggested that the wireless hardware of my modem is broken and no longer works but I'm eager to know if it is broken why is it still broadcasting and sending signal.
I've tried everything from upgrading and downgrading firmware to turning on and off the modem several times and changes modem position. And even tried the G-only 20MHz mode.We are at a very crowdy place. Using inSSIDer I could pick about 15 other access points. Only few of them are using Wireless-N, most of them are using Wireless-G.This is the inSSIDer diagram of my WAG160N modem from a client: [code]
View 5 Replies
View Related
Mar 26, 2011
I have been using a WAG320N since January. Around a week ago I came home to find the unit attempting to reconnect every few minutes - the DSL light flashing but nothing happening.
I replaced with an old Belkin unit which worked fine straight away.
i have upgraded the firmware, which made no difference, and secondly, tried a brand new unit, which strangly had the same problem even though the ancient belkin unit works first time and my original cisco unit worked for a couple of months before failing.
Are there any settings that relate to the DSL connection that may have been reset on the original unit? Could this be an issue related to signal quality or anything similar?
View 5 Replies
View Related
Feb 24, 2012
I have a WAG160N wireless gateway . Yesterday when i tried to power it on after a couple of seconds the power led was solid green and the Ethernet leds were blinking with no Ethernet cable attached to the router . The ethernet leds would keep blinking for minutes . I tried to use a screwdriver to do a hardware reset ( with power on ) and i noticed that the power led would start blinking green/red for minutes . I tried to use another wired router which i have for backup and it could connect to the internet normally without a problem.
What the green / red blinking power led means ( power led is green and then changes to red and then it starts over ) ?
View 1 Replies
View Related
Jul 20, 2011
My router's wireless connection goes down intermittently,about once a day. I can access the network with a machine that has a hardwired connection to the router only. To get it back up I have to perform the following steps.1) Reset the router.2) Go to the router web page, http:\192.168.1.13) Set router name4) Set router password5) Set wireless network name6) set wireless network secuity mode: WEP7) set wireless network password
LinkSys WRT54G V3.1 router with firmware update V4.21.1
View 2 Replies
View Related
Apr 29, 2012
My WRT54G lost the WiFi connection. I can get the internet if I connect the cable from my modem to my computer but my wireless connection is gone. So it's an issue with the router or settings. I called Linksys and was told the settings would have to be reset/updated. I was told there would e a fee. I did not want to pay a fee. I'd like to try to resolve myself.
I have a Mac laptop. Verizon ISP.
View 2 Replies
View Related
Apr 30, 2012
I bought a new EA3500 too replace my old WRT120N. After I replace it with the same configuration as I had in WRT120N, my dongle Wifi WN100 (Atheros) stop working. Even it indicates that Wifi is connected and dispyed in DHCP current table, I can't ping the device from my PC connected to the router.I rolled back to my WRT120N and all works again.
View 2 Replies
View Related
Mar 30, 2009
Is it possible to "tweak" the SNR on the WAG160n?
View 4 Replies
View Related
Dec 20, 2011
I've just been sent a new ADSL modem router by my new broadband supplier and plan on using it. However, my question is, can use my old wag160n to replace one of these, which im currently using to connect an old xbox to my wireless network, but also make use of the other lan ports on the wag (i.e. Connect more than one non wireless device to the wag and gain access to my wifi network?)
View 1 Replies
View Related
Jan 21, 2013
I've a 20Mbit/s connection with Telecom Italia provider.My line values follows:-- DSL Information ---DSL Driver Version: AnnexA version - A2pB023k.d21dDSL VPI/VCI: 8/35DSL Status: ShowtimeDSL Mode: ADSL2+DSL Channel:DSL Upstream Rate: 979 KbpsDSL Downstream Rate: 22105 Kbps Down upDSL Noise Margin: 12.0 dB 13.4 dBDSL Attenuation: 10.5 dB 4.3 dBDSL Transmit Power: 14.0 dBm 12.4 dBm?I have issues about connection stability : on HEAVY load download the PPP connection goes down. The sync signal stays up, but the PPP goes down!
In the log these lines corresponds:
Sun, 2013-01-20 23:29:29 - No response to 3 echo-requests
Sun, 2013-01-20 23:29:29 - Serial link appears to be disconnected.
Sun, 2013-01-20 23:29:29 - Enter: tdb_store.
Sun, 2013-01-20 23:29:29 - tdb_store: calling tdb_update.
Sun, 2013-01-20 23:29:29 - Enter: tdb_update.
[code]....
My ISP says that there are no troubles with the line and it can be an issue of the modem...
View 8 Replies
View Related
Jan 2, 2012
When I enable the debug with ?todo=debug shall I see more info in the logs ?How to stop the debugging ?How to print the logs ?What is the difference with debug and ppp_debug ?What is the effect of the sendlog command ? I didn't receive any email with a log !
View 3 Replies
View Related
Nov 20, 2011
When i connect my WAG160N V2 to DSL, i don't get link, but if i tried whit a friend´s modem i get link. I use the same cables and dsl split.
View 1 Replies
View Related
Aug 16, 2012
Struggling to enable Airplay using a WAG160N. Any settings I need on the router? Looking on forums, came across suggestion to disable WMM support. This seemed to work and i had Airplay but now I've lost it again.
View 1 Replies
View Related
Aug 30, 2012
I hard reset the router WAG160N and i can't access it on 192.168.1.1, i can connect to the wireless connection but it shows unindentified network, in properties gateway IP is absent. i also get 169.254.1.38 as IPv4.What could have happened to the modem, I can't use it at all at the moment?
View 3 Replies
View Related
Feb 21, 2011
Two years ago I bought a WAG160N for modem (ADSL) and router functionality. I consider to buy a pure router (E3000 or E4200) to connect to the WAG160N and use that one purely as the modem. How and what should I configure/disable on my WAG160N?
View 3 Replies
View Related
Mar 7, 2011
WAG160N
S/N: SSH00H406302
MAC: 001D7EB42921
Manufactured 04/2008
I can no longer access the internet, and the internet has been difficult to bring up for one to two weeks.Internet light does not come on. Under Status tab, interface is down, tried refresh and connect but nothing.The IP address can be pinged, 4 packets sent and 4 packets received. Tried resetting defaults and refreshing but no success.Bought this router in September 2008 to replace WAG54G which was constantly turning on and off every few seconds.
View 2 Replies
View Related
Dec 22, 2008
Why can I not register a WAG160N router with Linksys? Is this because these devices are not sold in the US?
View 4 Replies
View Related
Jun 16, 2012
Some years ago i have buyed a WAG160N i haven't never used, because once i plug it power, it start to reboot and reboot in a loop...Is there something to do with it or should i put it in the trash ? Firmware using is probably Ver.1.00.15?
View 6 Replies
View Related
Feb 4, 2011
I have a WAG160 setup to use the one fo the LAN ports as a WAN connection. The issue is every now and again the internet connection drops and it seems it is unable to communicate with the DNS server that is providing the internet connection.
View 9 Replies
View Related
Jan 25, 2011
Any hardware that can re-boot a DSL router such as the WAG 160N when the router no longer passes traffic ? Today, while the DSL line and the Internet appeared to be working, I could not log in to the router from a LAN machine and I had to power it off and on again by hand.We have a number of surveillance cams on the LAN and this must not happen, that the cams cannot be accessed, in particular if nobody is on site for a few days.Unfortunately, the WAG 160N does not have a daily re-boot option. What can one do except for installing a timer that switches the power to the router off and and on again ?
View 5 Replies
View Related
Nov 30, 2011
I'v just changed my internet provider. That new one uses Annex b, my wag160n is purposed to annex a. Thats what i'v done. Turn on bridge mode turn off dhcp, set PPPoE with my login and password. And here is my problem. I cant connect by wifi with more then 1 device. I can only connect with my laptop when i'm trying to connect on my xbox it says it cannot get ip adress from router. What shoudl i change ?
View 6 Replies
View Related
