How To Connect Pc To Printer Over Wifi
Jul 17, 2011
I don't know how to go about this but basically i have a cable modem connected to a router which then connects to my 3 pc's. (file/printer network sharing and stuff setup via the built in windows wizard). and i have a printer plugged into one of the pc's. (all using windows xp)they can all use the printer just fine.i got this NEW pc(windows 7), which is not physically connected to this router. instead, i set up a wireless connection to it. (a wired connection is not possible)internet access also works fine.BUT, i just realized that i think file/printer sharing it cannot do. i think it's because even though it can use the same internet it's on it's own wireless network and not the wired one. so i guess they can't communicate with each other? so i'm wondering. how can i get the wifi pc to talk to the non-wireless printer
View 4 Replies
ADVERTISEMENT
Feb 28, 2013
I've been trying to connect my downstairs PC (No wireless Card) to my upstairs Wi-Fi printer through my Wi-Fi router and have not been able to do it, even after reading and resetting my printer's network card as directed by Brother's tech support 4 times.Actually, that's not true once I WAS able to access the printer's online Interface and change a few settings, but when it came time to submit my settings, everything just froze and I wasn't able to access the interface afterwards. (see my setup below) Here's the result of the first attempts (Node Type and IP Address are NOT good)IP range NOT good 169.254.x.x .Second and temporarily successful attempt (Node Type and IP Address are good) IP Range IS good 192.168.x.x.I know it would be easier to simply buy a Wi-Fi network card for my PC but I would rather learn how to do this manually.
View 7 Replies
View Related
Dec 15, 2011
I just changed my router and now cannot get my printer to work - I used the push button and pin on the wifi printer - it won't connect
View 2 Replies
View Related
Jan 26, 2011
I have a BT homehub router with perfect wifi connection to my laptop operating Windows 7. I cannot connect via wifi with my HP Photosmart C4585 printer? In the diagnostic check it states my Network Name (SSID) has FAILED.
View 2 Replies
View Related
Dec 21, 2011
I move to new house recently and found out that my new house doesn't have wireless or WiFi connection. I have Canon MP560 printer that need WIFi connection and I couldn't find out how to connect it to my computer. How to connect it to computer without using wireless connection?
View 1 Replies
View Related
Dec 25, 2012
We purchased a Canon MG 3100 printer but am unable to connect. Have rebooted router but still no joy.
View 5 Replies
View Related
Dec 16, 2011
Been using an Epson Artisan 800 for years over a long USB cable. Love the thing to pieces, until it broke printing on it's 800th CD or so. Replaced with an Epson Artisan 835 and wanted to it set it up WiFi this time (new office layout doesn't lend well to a USB cable).But I can't see the damn thing on the network! And I don't think it's the printer's fault either, since it's the second one I've tried.Printer says it's connected to the router. Shows full signal strength on front panel. All network connection tests available on the printer's touch screen pass quickly:SSID checkCommunication Mode checkSecurity Mode checkMAC Address Filtering checkSecurity Key/Password checkIP Address checkDetailed IP Setup checkBut my Win 7 box can't see the printer!Running the Epson connection wizard on my Win 7 box failed, so I assigned both static IPs in the router's DHCP panel (192.168.1.101 and .105). The printer's network test page shows the IP stuck. Power cycled both printer and router twice each. No dice. IPconfig shows that the PC's IP stuck too.
View 12 Replies
View Related
Sep 7, 2011
who has wifi on his pc to pick up my internet from the other room be able to connect wirelessly to my hp psc 2410xi printer?
View 1 Replies
View Related
Apr 28, 2011
i just recently went back to the work force and i needed to get a laptop connected to the office router..but we didnt know the password.4 hours later all we managed to do it get knocked off line on the directly connected pc..i was disgusted with the people...but i also noticed then when the typed in the ip address in the search bar it would not pull up the Admin box..it just pulled up a search result.We changed the ethernet cords back n forth..just a real mess while speaking with them.
View 3 Replies
View Related
Jan 19, 2011
We have an HP DeskJet 3050 wireless printer connected by WiFi to two laptops. One laptop, a Dell 700m, runs XP Pro with all updates applied. The other laptop, a Dell XPS 15, runs Windows 7 64-bit, again with all updates applied.The printer works completely reliably from the XP machine. From the XPS 15, the printer works reliably for a day or so, then the icon in Devices & Printers is grayed, indicating the printer is offline. Even in this condition, I can access the printer's built-in web server using Firefox on the XPS 15 and the connection appears to be fine. The printer's IP address has not changed. But the printer is still reported as offline for printing by Windows.
The workaround is to delete the device and reinstall it using Add Printer and Have Disk, but using the already installed drivers rather than re-installing. After doing that, the printer then works for a few days before again going offline.This problem is extremely irritating. I've done Google searches on this problem. Although I've found a variety of similar reports for various brands of wireless printers on Vista or Windows 7, I've not seen a solution. My latest attempt is to share the printer on the Dell 700m and print to the shared printer from the XPS 15. We'll see if that continues to work for a few days (I suspect it will). But this isn't really a solution and not always convenient.
View 3 Replies
View Related
Nov 26, 2012
How can I set up a N150 router so that I can access a WiFi printer (Canon) with my laptop and/or iOS device? No Internet involved - just want to wirelessly print to my new Canon printer.
View 1 Replies
View Related
Jan 11, 2011
what is the set up procedure for adding a printer with wifi capabilities?
View 1 Replies
View Related
Jan 8, 2012
went to uninstall the other two and then went to install our new one on the main computer.I have now lost connection with the wifi to this pc and only this one. (the internet still works on two laptops) unfortunately i need this computer for work and therefore need the internet quite urgently. Perhaps uninstalled something by accident and if so what is it and what can i download?
View 3 Replies
View Related
Jan 17, 2012
Can I use a router to wifi from my laptop to printer without internet connection?
View 1 Replies
View Related
Dec 31, 2011
I don't see a forum for the DIR-665 so I am posting this here.I have setup my network using the DIR-665. I can print to my network printer (not plugged into router usb it is a Network printer) from WIN XP and Mac Snow Leopard and Lion via a network cable.
When I connect to the router via WIFI it shows the printer is ready. Then I click print and it starts trying to find the printer but then fails saying the printer is not on the network.
View 14 Replies
View Related
Sep 18, 2012
I'm newbie in Networking. I want to establish a small WLAN network where all the laptops (6 laptops) can use WiFi Internet and also can print via a network printer.I have these hardwares:1: DSL Modem2: A Belkin F5D8233-4 300 Mbps router3: A Network printer (with RJ45 ethernet port, Not wireless printer)4: LAN Cable (if needed)5: Finally 6 Client Laptops
View 4 Replies
View Related
Aug 18, 2011
I have just upgraded my Linksys router from an older one to the E-2500 about a week ago. Everything is working great on my wired desktop and 3 wireless laptops except the printer will no longer work from any of the computers. I've checked the printer wireless settings and they are correct (ssid and password) and it says it's connected to the wlan. Each of the computers shows the printer is active and set to default BUT the port light on the back of the new router is not on. I have changed cables and still no light, the printer is set up for sharing and it did work a couple days ago but port light was on then.
I have not added anything that wasn't hooked up on my old router, I"m just trying to get what I had on the old router to work on the new one. Everytime I call support, they have me change something that messes up what a previous agent had me do. Now they want me to pay for a direct connection so they can upgrade my router firmware...they didn't even ask what version I already had which happen to be the same version that is available on [URL] so if I had agreed, I would have paid for nothing. I had already paid $29.99 for additional 14 day support on my old router only to find out I needed a new one.
I've been using Linksys routers for quite awhile but I'm just about ready to change brands. I would really like to give this E-2500 a chance.
View 1 Replies
View Related
Apr 5, 2013
I use a Netgear FS605 Ethernet Switch to connect a wifi modem to my network and thus to the internet. People in that room can jump online via the wifi modem. You can also print to the wireless printer in that room via that wifi modem being local. However, I can no longer print to the wifi printer from anywhere else in my network (I could before I got a new router and wifi modem in there).Would this be a problem with this Switch or with the modem e.g.
View 1 Replies
View Related
Aug 14, 2012
I have a Linksys E2000 router. I am trying to install an Epson NX230 printer on my home network. Apparently, the Epson printer has a MAC address assigned to it. My network cannot find the printer. I looked at my riuter setup and the MAC Address Clone has two buttons, Enabled Disabled. The Disabled button is clicked on. Accdording to documentation I foudn on this website, it looks like I can Enabled the MAC Address clone button. The document also mentgioend entereding the MAC address for a PC.
If I enable the MAC Address Clone, do I enter the MAC address for the printer or during the install process does the MAC address get installed also
View 9 Replies
View Related
Feb 17, 2013
Region : Romania
Model : TL-WR1043ND
Hardware Version : V1
Firmware Version : latest
ISP : RDS
I am experiencing an issue since I bought my new laptop.I connect to the Internet with Windows 8 and TL-WR1043ND.My issue is that ever since I installed the printer utility from the site I hear an ON/OFF sound in my speaker randomly and I can not figure out what`s wrong.I think it`s trying to search for my printer but it it off.Also wi-fi disconnects randomly ever since this application was installed.What can I do to fix this issue.Computer works fine without the application.There is no report about this issue in the Event Viewer.
View 4 Replies
View Related
Jul 5, 2011
Win7, wrt54gs,
It works sometimes. I imagine it has a noise problem since sharing files works, internet works. I cannot remember how to change channels on this router to save my life, though. What is special about sharing a printer?
View 1 Replies
View Related
Jan 15, 2011
I have a hp computer and a Toshiba lap top computer and I want to hook them both to one hp office jet pro printer, I bought a switch called10 gear printer switch, but it only see one computer, its not see the other computer to let print ,I tried to go into windows printer sharing program to set both computers up to share the printer but the device still doesn't see one computer, both computers have been install all hardware for the printer.
View 1 Replies
View Related
Jan 25, 2011
I can't connect my printer wireless to my computer, I get an error message saying my pc and printer sre connected to different ip address.
View 1 Replies
View Related
Jul 29, 2011
My small network is connected to a large private network through a small 8 ports router with some management such as NAT, routing table, etc. In this small network I have a network printer/scanner. How can I access IT from the WAN side.
View 4 Replies
View Related
Sep 26, 2011
when I try to connect my wireless printer, it is asking for the IP address. I type in the same addres that is on my computer, but I get message says computer does not recongize network printer. So I trid two other addresses and those did not work. I am conufsed. How do I knw what address to type in?
View 2 Replies
View Related
Mar 1, 2012
Computer A main computer ........printer hard-wired to it.
Computer A wireless connection to router.
Computer B wireless too. no printer.
Computer C hard-wired to router. no printer
Can B and C 'address' and use the printer at A ?
View 5 Replies
View Related
Oct 14, 2011
I need to connect my hp printer to my computer but I do not now my network security key. My network is WPA I think.
View 1 Replies
View Related
Mar 30, 2013
I've got a wireless N home network set up. My wifes PC is connected directly to the cable modem, and our Epson usb printer is connected to her pc. My Toshiba laptop is using a wireless connection. I can see her pc on the network, but cannot see or connect to the printer over the network. Her PC is running Windows 7, mine is running Windows 8 Pro. I was able to print on this printer with my previous pc, which ran Windows 7
View 1 Replies
View Related
Jan 14, 2012
how do i connect my wireless hp printer to my new router
View 1 Replies
View Related
Dec 10, 2012
How to connect printer in lan by use of ip-adress.
View 2 Replies
View Related
Feb 15, 2011
can see printer on the network but it will not connect
View 5 Replies
View Related
Jan 13, 2012
Set up Dell 310 wireless printer to Fedora 16 OS
View 1 Replies
View Related
Apr 8, 2011
I was just wondering how to connect 3 laptops to 1 printer in my office?We don’t have a server and all laptop contacted to internet wireless through a router next door. (I don’t have access to that router)I was thinking to get a hub and then connect it to the Ethernet cable back of the printer and then connect it to each laptop?
View 3 Replies
View Related
