Computer A main computer ........printer hard-wired to it.
Computer A wireless connection to router.
Computer B wireless too. no printer.
Computer C hard-wired to router. no printer
Can B and C 'address' and use the printer at A ?
a 4 port USB hub be used to connect 4 computers to 1 printer. Essentially using a usb hub to network a bunch of computers to a printer nearby
View 1 Replies View RelatedI have a SMC Gateway Router and 2 computers connected to it with RJ-45 cable. They are (1 iMac + 1 PC) 150 feet apart both computers are wired to the router. I also have a Canon Pixma MP 560 Multifunction Inkjet printer that has the capability to be connected both wired and wireless. Right now it is only connected to the iMac via a USB connection as all 3 (router, iMac and printer) are on the same workstation.how to connect the printer so it could also support the 2nd computer a Windows PC which is located on the floor below. Can I do that through the wired router too? If not possible, I also have the capability to connect wirelessly although I would prefer to use the wired connnections.The PC has a Belkin USB 2.0 Network Adapter for wireless connection; both SMC Router and Belkin USB adapter are 902.11 N capable.
View 1 Replies View RelatedI have a SMC Gateway Router and 2 computers connected to it with RJ-45 cable. They are (1 iMac + 1 PC) 150 feet apart both computers are wired to the router.I also have a Canon Pixma MP 560 Multifunction Inkjet printer that has the capability to be connected both wired and wireless. Right now it is only connected to the iMac via a USB connection as all 3 (router, iMac and printer) are on the same workstation.how to connect the printer so it could also support the 2nd computer a Windows PC which is located on the floor below. Can I do that through the wired router too?If not possible, I also have the capability to connect wirelessly although I would prefer to use the wired connnections.The PC has a Belkin USB 2.0 Network Adapter for wireless connection; both SMC Router and Belkin USB adapter are 902.11 N capable
View 7 Replies View Relatedhow can i share printer to other computers. i alreadily have 4 computers.. so ineed to share all files and software to all computers.
View 1 Replies View RelatedI have 2 computers(1 and 2) connected to a router with ethenet cables and printer connected to computer 1. With both computers on, both can use the printer. With computer 1 turned off, computer 2 cannot access the printer. So, what do I need to allow computer 2 to access the computer when computer 1 is off?
View 3 Replies View RelatedTSG SysInfo:
Tech Support Guy System Info Utility version 1.0.0.1
OS Version: Microsoft Windows XP Professional, Service Pack 3, 32 bit
Processor: Intel(R) Core(TM)2 Duo CPU E6550 @ 2.33GHz, x86 Family 6 Model 15 Stepping 11
Processor Count: 2
RAM: 2046 Mb[code]...
I am trying to share my printer with the other 2 computers on my home network. I have the printer connected to my XP machine. The other 2 computers are running XP and Windows 7. The Windows 7 machine is directly connected to the router and my computer and the other XP computer are connected wirelessly.I've shared my printer and given it a share name. But the other 2 computers cannot access my computer for some reason.I'm not sure why they can't access my computer to see the shared printer.
I have a desktop computer running windows xp, it is wired to my router. I am trying to network it together with my laptop that is running windows 7 and connects wirelessly.
View 1 Replies View RelatedHow to print in one printer using multiple computer?
View 1 Replies View RelatedI have a SMC Gateway Router and 2 computers connected to it with RJ-45 cable. They are (1 iMac + 1 PC) 150 feet apart both computers are wired to the router. I also have a Canon Pixma MP 560 Multifunction Inkjet printer that has the capability to be connected both wired and wireless. Right now it is only connected to the iMac via a USB connection as all 3 (router, iMac and printer) are on the same workstation.I would like a detailed explanation as to how to connect the printer so it could also support the 2nd computer a Windows PC which is located on the floor below. Can I do that through the wired router too?If not possible, I also have the capability to connect wirelessly although I would prefer to use the wired connnections.The PC has a Belkin USB 2.0 Network Adapter for wireless connection; both SMC Router and Belkin USB adapter are 902.11 N capable?
View 1 Replies View RelatedHave three computers ( 2 are XP one is vista) connected via wireless router one computer is considered a host computer sitting on a docking station which has the printers connected to it. In the beginning once everything was connected we could print from any computer wireless, then one day we had a power outage and for some reason we can only print from the host computer. How to get the other computers back online to print. All computers are still able to connect to the internet via wireless router (Linksys E1000) but not able to print except the host which is directly connected to the printers.
View 3 Replies View RelatedI have managed to install a printer on my computer using the USB port on the E4200 router.I'm just wondering is it now possible to install this printer on other computers / laptops.I'm not really sure how the printer is assigned. Is there some network share I can connect to?
View 8 Replies View RelatedHOW TO CONNECT MULTIPLE COMPUTER TO PRINT IN ONE PRINTER
View 1 Replies View RelatedA customer need diagram on how to connect 4 computers working together.
View 1 Replies View RelatedI have a home wireless network and my service provider is Suddenlink. I use a DLink modem and have two Tosiba laptops. All of this has been working fine until this morning when one of the laptops won't connect to the internet. when I run the trouble shooting guides on it I get messages that the problem is that the modem won't connect to the internet. However, the other laptop (this one) is working fine. when I look at the network map i see both computers and a green line to the modem. on this computer, there is also a green line from modem to internet. the other computer shows a res x on the modem to internet line. this is a sudden change i have restarted the computer the modem and the router. I can also conenect this computer to the internet via a mifi that I have but not the other laptop. there are no red x's on any of the hardware when I go to the "manage" computer.
View 1 Replies View Related Here is my setup:
1- laptop1 is windows 7 with 192.168.1.1, submask 255.255.255.0
2- laptop2 is windows XP with 192.168.1.2, same submask as above.
Laptop1 connects via CAT5 (non-crossover) RJ-45 into a switch (port 1). Laptop2 connects via CAT5 (non-crossover) RJ-45 into port 2 of switch. Both ends of the CAT5 are, of course, connected into each laptop's network connector.pinging resulted in timed out from both.
I have two computer but one monitor. and i wanna connect both computer with one monitor, one keyboard & one mouse. Like KVM switch. but if i connect with KVM switch then i can turn on one at a time & if i wanna use another one so i hv to turn off first one.
View 3 Replies View Relatedso how can we connect 4 remote computers so dat they can share data,as well as if data is updated on 1 pc ...it is automatically updated on rest 3.....
View 8 Replies View Relatedmy three computers cannot connect to the internet, they were fine last night now it says. cannot comunicate with primary sever, do you think it is my comp or sever.
View 3 Replies View Relatedhow to connect 20 computers in a network[/u][/i][/b]
View 1 Replies View RelatedI have 3 systems. I would like to connect PC 1 to PC 2 & 3 .But not between 2 & 3. ie. 3 & 2 must be connected to PC 1. I want gigabit connection between them. The purpose is realtime streaming of audio from PC 2 & PC 3 to PC 1. The only data that goes fom PC 1 to 2 & 3 is MIDI information and automation. The problem now is that I'm having dropouts in audio, and bandwidth limitation.
whether using a dual port PCI-e lan card on PC 1 and single port card on PCs 2 & 3 or using a gigabit switch would be better. how to configure the ports for this type of a connection ( if possible that is ). Does using dedicated network cards with on-board processors and ram take all the networking load off the system's cpu and ram.
i need to know is there any way to connect two computers to the same data connector like photon+ or other net connectors
View 1 Replies View RelatedFirst 3 days ago i came in to my work and my 2 Desktop computers where not connecting to the internet. After trouble shooting i found that my cell phone and wireless computer would connect. then hardwiring with my cat5 cable my laptop worked as well. i couldn't connect to the router as well from the 2 Desktop computers. restarted every thing router modem computers ext. nothing.Then i tried ping tests nothing could not ping each other or the router. though the network map clealy told me the ip addresses of each computer and that it was connecting. then as though from random i tried again to log in to the router. 192.168.2.1 and one of my computers found it and could then connect to the internet.
View 13 Replies View RelatedI have a Windows 8 Pro laptop, and a new Windows 7 Laptop. When I try to setup the connection so that I can share files and folders between the two computers, I am asked for the User name and the password. I see the password in the homegroup, but entering it does nWhat is the user name in this case? My computer name or the other computer name or something else
View 1 Replies View RelatedHow to connect 4 pc on network.
View 1 Replies View RelatedHow to connect my 5 computers to an internet. i already have a hub and lan connections but the other 4 computers still don't have internet connections.
View 1 Replies View RelatedI want to put a laptop in the barn, with a web cam. I have a phone line (with spare wires) running to the barn and I want to connect my house laptop to the one in the barn.How do I do this?
View 1 Replies View RelatedSo I set up my router and modem and I have the modem connected to the linksys router and the ethernet port to my computer. The computer with the ethernet cable works fine, but all the other laptops can not connect to the wireless.
View 14 Replies View Relatedi want to connect my computer with other computer which is in different country
View 4 Replies View RelatedEverything was working fine, and various computers, tablets, and even my smartphone, all hooked up to my router without any problems. Somehow, this week, first my Asus U56E wouldn't connect (before all this it was automatic), and then my Google chromebook wouldn't connect either. The Asus is my main computer. And the reason for writing. I just mention the chromebook because they both quit connecting at same time, pretty much. But still my old xp netbook connects, as does my new google nexus7 tablet. And my nexus one phone. All hook to wifi, with no problem.I tried everything I could think of: This is a Dlink Dir615 router. Even set a new wireless network up, but it doesn't seem to connect. I ran the Windows Network Diagnostics, and it reset everything, and looked like it was fixing it, but no go. It said to investigate router or access point issues. I did what it said, and what has always worked with these problems. Turned off router for about 1/2 minute, then restarted it. Then did the same with the Cox motorola modem, *and* the router, but still, just doesn't want to connect. Wireless, that is...no problem with ethernet.Finally pushed the little pin in in the back of router, and reset the router entirely. Set all up again. Same thing happens, it just doesn't seem to recognize these two computers. So just to be sure, I used my nexus one as a wifi point: and these computers hook up fine, so it seems to be something with the router. My ISP is Cox. Cable. Router D-Link Dir 615, latest firmware. Modem Cox issue Motorola Surfboard. Antivirus Microsoft Security Essentials, and Win7 Firewall (I tried with these two turned off, but still no).I include the xirrus app's output...My wireless network on that app is 'phubai' and that is the one that won't connect. I had trouble bringing it up on Xirrus, too. It would only show when I would attempt to connnect, then it would disappear again.
ipconfig /all
C:Windowssystem32>ipconfig /all
Windows IP Configuration
Host Name . . . . . . . . . . . . : geffASUSpc
rimary Dns Suffix . . . . . . . :
[code]...
I just loaded up my machine with Windows Vista Home Basic and wanted to connect my another laptop to it via Wireless AdHoc network. I created a wireless adhoc network from the network and sharing center. But was unable to connect the other laptop to it. Everything is ok. My WLAN is on, drivers are also latest.[code]
View 4 Replies View RelatedMy XP laptops cannot connect to my TEW-639GR router over wifi. I get the "Limited or No Connectivity Message". The same 2 XP laptops can connect if they are wired without problems.My Ubuntu computer can connect to wifi and wired without problem."Limited or No Connectivity" usually means a DHCP problem in XP. I have DHCP turned on on my router.This problem did not immediately start when I first set up the TEW-639GR. It happened infrequently on my XP laptops initially for about 2 months but now it happens all the time.
View 1 Replies View RelatedMy XP laptops cannot connect to my TEW-639GR router over wifi. I get the "Limited or No Connectivity Message". The same 2 XP laptops can connect if they are wired without problems.My Ubuntu computer can connect to wifi and wired without problem."Limited or No Connectivity" usually means a DHCP problem in XP. I have DHCP turned on on my router. This problem did not immediately start when I first set up the TEW-639GR. It happened infrequently on my XP laptops initially for about 2 months but now it happens all the time
View 2 Replies View Related